2AHZD-AP-V1AP-V1

Motion Studio WELCOME to Motion Studio Motion Studio provides an easy way to collect data with your Opal wearable sensors. Features include advanced configuration, recording, data management, calibration, and real-time visualization. web: www.apdm.com email: [email protected] phone: 888-988-APDM (2736) CONTENTS Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info PARTS 1 7 9 11 31 27 25 SETUP SOFTWARE INSTALLATION USING YOUR SOFTWARE TIPS TROUBLESHOOTING INFORMATION PARTS Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info PARTS OPALS The Opal movement sensors precisely record movement with triaxial accelerometers, gyroscopes, and magnetometers. Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info 2 ACCESS POINT The wireless Access Control Point allows for wireless communication between the host computer and Opal movement sensors. A single Access Point can support up to 6 Opals. 3 Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info DOCKING STATION The Docking Station is used to charge and configure the Opal movement sensors. Depending on your configuration, up to 6 Docking Stations may be chained together into a single unit. USB DRIVE The USB drive contains the Motion Studio software for data collection. 4 Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info WIRELESS REMOTE The Motion Studio software supports the use of a remote control to aid while collecting data. This functionality makes it possible for a single attendant to collect data while following or assisting the subject. STRAPS There are a number of options for securing the sensors on subjects using a selection of straps. A. Wrist and Foot strap B. Sternum strap BA 5 Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info CD E 6 Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info C. Lumbar strap D. Thigh strap E. Head strap SETUP Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info SETUP SETUP 1. Connect the Access Point to your computer using the Type-B USB cable provided. 2. Connect the external power adapter to the Docking Station, and plug it in. 3. Connect the Docking Station to your computer using the Micro USB cable provided. 4. Plug the Opal(s) into the Docking Station. 8 Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. How to M.L. Software DownloadTroubleshooting Hardware Cong Tech Stats/Info Parts SetupM.L. H…

Text truncated - open the document above for the full version.

2828 SW Corbett Avenue, Suite 135 Portland, OR 97201 FRN:0025398454 February 21, 2019 D ear Application Examiner: Element Materials Technology is submitting this application for original Equipment Authorization Certification for the AP-V1, FCC ID: 2AHZD-AP-Vl. The Op al movement monitor uses a 2.4 GHz DTS radio utilizing a GFSK 2Mbps mesh radio network between wearable Opal movement monitors, and between monitors and Opal "Access Poin ts" (Aps) which connect the Opal network to USB hosts. The radio within the device operates within the 2.4 GHz radio band with an 802.15.4 compliant antenna. The device can be configured with only one antenna which is permanently installed at the factory a nd is not accessible to the user. The Opal system's main microcontroller controls the output power of the radio through a digital interface and is never allowed to transmit above 0dBm. The enclosed technical reports and exhibits demonstrate compliance with FCC rules 47 CFR part 15.247 and RF Exposure requirements. You r efforts in reviewing this application are greatly appreciated. Regards, �:107 Executive Vice President of Operations

PROPRIETARY AND CONFIDENTIAL AP-V1 External Photos: Figure 1: AP Front Figure 2: AP Back Figure 3: AP Top Figure 4: AP Bottom Figure 5: AP Side Figure 6: AP Side

AP-V1 Label and Location: The label for the Access Point (“AP”) is printed and affixed to the back of the case. Figure 1: Location of AP-V1 label The label information is detailed within the Label-Accesspoint_V1 Label CAD (see next page) Confidential and Proprietary 25.4mm1.0in 76.2mm3.0in Notes: Label material: Electronics Imaging Materials 340350125 or equivalent1. Printing ribbon: Electronics Imaging Materials T68433074 or equivalent2. Graphics' unique identifier strings and 2D barcode generated by the 3. production script: gen_label.py BB 12 THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF APDM, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF APDM, INC. IS PROHIBITED. PROPRIETARY AND CONFIDENTIAL UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MM TOLERANCES: WHOLE NUMBER 1 ONE PLACE DECIMAL 0.5 TWO PLACE DECIMAL 0.25 THREE PLACE DECIMAL 0.125 ANGLES: MACH 0.5° BEND1° INTERPRET GEOMETRIC TOLERANCING PER: ASME Y14.5M-1994 DRAWN CHECKED ENG APPR. DATENAME TITLE: SIZE A REV J. Bennett G. Gallino A. Greenberg 3/5/2019 3/5/2019 3/5/2019 SHEET 1 OF 1 DO NOT SCALE DRAWING 1.1 Label- Accesspoint_V1 AA 12 Confidential and Proprietary

APDM Wearable Technologies Inc 2828 S Corbett Ave ste 135, Portland, OR 97201 PROPRIETARY AND CONFIDENTIAL APDM Opal v1 Access Point (AP) Internal Photos 2020-09-23 Contact: Andrew Greenberg (​[email protected]​), 503-708-7711 APDM Wearable Technologies - PROPRIETARY AND CONFIDENTIALPage 1 of 7 Figure 1: Front of PCBA, showing both 2.4 GHz RHCP patch antennas. Note the central fastener and small feed pin in the lower left hand corner of each patch. Antenna 1 is on the right, Antenna 2 is on the left. APDM Wearable Technologies - PROPRIETARY AND CONFIDENTIALPage 2 of 7 Figure 2: Front of PCBA, with patch antennas removed. Note that there are no active components on the top surface of the PCBA. APDM Wearable Technologies - PROPRIETARY AND CONFIDENTIALPage 3 of 7 Figure 3: Back of the PCBA, showing the active components. APDM Wearable Technologies - PROPRIETARY AND CONFIDENTIALPage 4 of 7 Figure 4: Back of the PCBA, nRF24L01+ radio ICs identified by red circles. Radio 1 is on the left, Radio 2 is on the right. APDM Wearable Technologies - PROPRIETARY AND CONFIDENTIALPage 5 of 7 Figure 5: Detail of Radio 1 on back of PCBA which goes to Antenna 1 APDM Wearable Technologies - PROPRIETARY AND CONFIDENTIALPage 6 of 7 Figure 6: Detail of Radio 2 on back of PCBA which goes to Antenna 2 APDM Wearable Technologies - PROPRIETARY AND CONFIDENTIALPage 7 of 7

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. More: https://www.bis.doc.gov/index.php/forms-documents/regulations-docs/14-commerce-country-chart/fileT APDM, Inc. V1 Accesspoint (AP-V1) FCC 2.1091:2019 Co-located 2.4 GHz Wideband DTS Transceivers Report # APDM0016.2 Rev. 1 NVLAP Lab Code: 200630 CERTIFICATE OF EVALUATION 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing Last Date of Evaluation: Tuesday, November 26, 2019 APDM, Inc. EUT: V1 Accesspoint (AP-V1) RF Exposure Evaluation Standards Specification Method FCC 2.1091:2019 FCC 447498 D01 General RF Exposure Guidance v06 Results Method Clause Description Applied Results Comments 7.2 Maximum Permissible Exposure Yes Pass None Deviations From Evaluation Standards None Approved By: Donald Facteau, Process Architect Report No. APDM0016.2 Rev. 1EAR-Controlled Data2/10 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 01 Updated Antenna gain, calculated power density, power density ratios for both radios. Updated sum of ratios. 2020/11/04 9, 10 Report No. APDM0016.2 Rev. 1EAR-Controlled Data3/10 ACCREDITATIONS AND AUTHORIZATIONS 2019.03.08 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Element to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Within Element, we have a EU Notified Body validated for the EMCD and RED Directives. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: https://www.nwemc.com/emc-testing-accreditations Report No. APDM0016.2 Rev. 1EAR-Controlled Data4/10 FACILITIES 2019.03.08 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-10 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. APDM0016.2 Rev. 1EAR-Controlled Data5/10 RF Exposure Condition 2018-07-17 The following RF Exposure conditions were used for the assessment documented in this report: Intended Use Mobile Location on Body (if applicable) NA How is the Device Used The V1 Accesspoint is used at a distance of greater than 20 cm from the user. Radios Contained in the Same Host Device Wideband DTS (U3003) Wideband DTS (U3004) Simultaneous Transmitting Radios Wideband DTS (U3003), Wideband DTS (U3004) Body Worn Accessories NA Environment General Population/Uncontrolled Exposure Report No. APDM0016.2 Rev. 1EAR-Controlled Data6/10 PRODUCT DESCRIPTION 2018-07-17 Client and Equipment Under Evaluation Information Company Name: APDM, Inc. Address: 2828 SW Corbett Ave. Suite 135 City, State,…

Text truncated - open the document above for the full version.

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. More: https://www.bis.doc.gov/index.php/forms-documents/regulations-docs/14-commerce-country-chart/fileT APDM, Inc. V1 Accesspoint FCC 15.247:2019 2400 – 2483.5 MHz Other Wideband (DTS) Transceiver Report # APDM0016.1 Rev. 1 NVLAP LAB CODE: 200630-0 CERTIFICATE OF TEST 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Last Date of Test: February 12, 2019 APDM, Inc. Model: V1 Accesspoint Radio Equipment Testing Standards Specification Method FCC 15.247:2019 ANSI C63.10:2013, KDB 558074 FCC 15.207:2019 ANSI C63.10:2013 Results Method Clause Test Description Applied Results Comments 6.2 Powerline Conducted Emissions Yes Pass 6.5, 6.6, 11.12.1, 11.13.2 Spurious Radiated Emissions Yes Pass 7.8.6 Band Edge Compliance - Hopping Mode No N/A Not required for DTS devices. 7.8.2 Carrier Frequency Separation No N/A Not required for DTS devices. 7.8.3 Number of Hopping Frequencies No N/A Not required for DTS devices. 7.8.4 Dwell Time No N/A Not required for DTS devices. 11.6 Duty Cycle Yes Pass 11.8.2 Occupied Bandwidth Yes Pass 11.9.1.1 Output Power Yes Pass 11.9.1.1 Equivalent Isotropic Radiated Power Yes Pass 11.10.2 Power Spectral Density Yes Pass 11.11 Band Edge Compliance Yes Pass 11.11 Spurious Conducted Emissions Yes Pass Deviations From Test Standards None Approved By: Kyle Holgate, Operations Manager Report No. APDM0016.1 Rev. 1EAR-Controlled Data2/64 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 01 Revised antenna gain and corresponding radiated output power (EIRP) values. 2020-11-04 41-44 Report No. APDM0016.1 Rev. 1EAR-Controlled Data3/64 ACCREDITATIONS AND AUTHORIZATIONS 2018.09.04 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Element to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB). Certification chambers and Open Area Test Sites are filed with ISED. European Union European Commission – Within Element, we have a EU Notified Body validated for the EMCD and RED Directives. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: https://www.nwemc.com/emc-testing-accreditations Report No. APDM0016.1 Rev. 1EAR-Controlled Data4/64 FACILITIES 2018.12.13 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-10 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 New York Labs NY01-04 4939 Jordan Rd. Elbridge, NY 13060 (315) 554-8214 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200761-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 N/A 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R N/A SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 N/A A-0108 A-0201 A-0110 Recognized Phase I CAB for ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 N/A US0017 US0191 US0157 Report No. APDM0016.1 Rev. 1EAR-Controlled Data5/64 MEASUREMENT UNCERTAINTY TMU.2015.07.10 Mea…

Text truncated - open the document above for the full version.

POWERLINE CONDUCTED EMISSIONS WTD.2018.12.14.1 , POWERLINE CONDUCTED EMISSIONS WTD.2018.12.14.1 , photo PSA-ESCI 2018.07.27 photos PSA-ESCI 2018.07.27 SE HF (1).JPG SE HF (2).JPG HF (2) SPURIOUS RADIATED EMISSIONS photo PSA-ESCI 2018.07.27 photos PSA-ESCI 2018.07.27 SE HF (3).JPG SE HF (4).JPG HF (4) SPURIOUS RADIATED EMISSIONS photo PSA-ESCI 2018.07.27 photos PSA-ESCI 2018.07.27 SE HF (5).JPG SE HF (6).JPG HF (6) SPURIOUS RADIATED EMISSIONS photo PSA-ESCI 2018.07.27 photos PSA-ESCI 2018.07.27 SE HF (7).JPG SE HF (8).JPG HF (8) SPURIOUS RADIATED EMISSIONS photo PSA-ESCI 2018.07.27 photos PSA-ESCI 2018.07.27 SE LF (1).JPG SE LF (2).JPG LF (2) SPURIOUS RADIATED EMISSIONS XMit 2017.12.13 DirectConnect (1).JPG DirectConnect (2).JPG DIRECT CONNECT XMit 2017.12.13 DirectConnect (3).JPG DirectConnect (4).JPG DIRECT CONNECT