
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
MicrowaveModuleMIC01-5GH01Version:A1 ShenzhenMerrytekTechnologyCo.,Ltd Add:2 nd and3 rd floor,NO.3Building,380XiangshanAvenue,Luotian,Yanluo,Baoan,Shenzhen,518127,China Tel:+86(0)755-23057253Fax:+86(0)755-27863012Website:www.merrytek.com Page 1 of 8 SPECIFICATION ProductName:MicrowaveModule ModelNo.:MIC01-5GH01 IssueDate:November30,2020 CUSTOMERAPPROVED PRODUCT DIRECTOR APPROVED SALES CHECKED R&D CHECKED PREPARED MicrowaveModuleMIC01-5GH01Version:A1 ShenzhenMerrytekTechnologyCo.,Ltd Add:2 nd and3 rd floor,NO.3Building,380XiangshanAvenue,Luotian,Yanluo,Baoan,Shenzhen,518127,China Tel:+86(0)755-23057253Fax:+86(0)755-27863012Website:www.merrytek.com Page 2 of 8 1.Features 2.Application MIC01-5GH01hastheadvantagesoflongsensingdistance,built-in,nodeadzone,andnotaffectedbytemperature andhumidity,noise,dust,airflow,andambientlight.Itiswidelyusedininductionlamps,automaticdoorcontrol,smart home,smartbathroom,smallhouseholdappliances,security,IoT,smartterminalsandotherproducts,suitsfor corridors,garages,toilets,courtyards,balconiesandotherplaces. 3.Parameter Input OperatingVoltageRange5-12VDC RatedCurrent33±3mA Output Mode Motiondetected,outputTTLcontrolsignal LeveloutputHighlevel:3.3V±0.2VDC Lowlevel:0V+0.2VDC Sensor HFsystem5.8GHz±75MHz,ISMwaveband TransmittingPower0.1mWmax Holdtime Pleaserefertothediagramandthepinsdefinition. Stand-byDIMlevel Stand-byperiod Detectionsensitivity Daylightsensor Detectionarea(radius) ≥4m(typicalvalue,ceilingmountedataheightof3m,walking speedof0.3m/s) Mountingheight6mMax Detectingangle360°(ceilingmount);110°(wallmount) 1)5-12Vdcinput,lowworkingcurrent,andlowstandbypower. 2)Smallsizeandeasytoinstall. 3)Patentedlowimpedanceantennadesigntoavoidinterferencewithother wirelesssignals. 4)Built-inmultipledigitalfilteralgorithmtoresistbreezeanddrizzle,and outputshighandlowlevelsignals. 5)Detectionarea,holdtime,daylightthresholdandotherpinsarereserved. 6)Multi-functionextensionpinsF1-F5areavailable,andsensingfunctionis easytoexpand,noadditionalMCUisrequired. ! Pleasereadthe10thinstructioncarefullybeforeusingthisproduct,sincetheperformanceofDC-poweredmicrowaveproducts iscloselyrelatedtothestabilityandcharacteristicsoftheauxiliarypowersupplyoftheLEDdriver. MicrowaveModuleMIC01-5GH01Version:A1 ShenzhenMerrytekTechnologyCo.,Ltd Add:2 nd and3 rd floor,NO.3Building,380XiangshanAvenue,Luotian,Yanluo,Baoan,Shenzhen,518127,China Tel:+86(0)755-23057253Fax:+86(0)755-27863012Website:www.merrytek.com Page 3 of 8 Operating Environment Operatingtemperature -20°C...+85°C Storagetemperature-40°C...+125°CHumidity:10%-95%(non-condensing) Certificate Standards EnvironmentalrequirementRoHS CertificateCE、FCC、RED IPRatingIP00 ProtectionclassClassII InstallationBuilt-ininstallation Dimension15.5x20mm PackageBubblebag+partition+outerbox(K=A) NetWeight3g Note 1.Thesensingdistanceisrelatedtothemovingspeedandvolumeofthemovingobject.Thisdataisobtained bytestingapersonwithaheightof165cmandamovingspeedof0.3m/s. 2.Theoutputinterfacetypeisswitchedbyupdatingthefirmwareofthesoftware. 3.It’sequippedwithalightsensorbydefault. 4.Interfacepinheaderisnotincludedbydefault. 4.Dimension(mm) Note Theabovedimensionaldatawillhavecertaintolerancesinactualproducts,andthemaximumtolerancedoes notexceed±1mm. MicrowaveModuleMIC01-5GH01Version:A1 ShenzhenMerrytekTechnologyCo.,Ltd Add:2 nd and3 rd floor,NO.3Building,380XiangshanAvenue,Luotian,Yanluo,Baoan,Shenzhen,518127,China Tel:+86(0)755-23057253Fax:+86(0)755-27863012Website:www.merrytek.com Page 4 of 8 5.Structure 6.Pins&partsdefinition NameDescriptionFunctionandParameters 1VPositiveinputOperatingVoltageRange:5-12Vdc 2O Highlevelandlow levelsignals Highlevelandlowlevelsignaloutputinterface 3GNegativeinputNegativeinputofthepowersupply 4F1Functionpin1Holdtimesettingpin1(seeconfigurationsheetfordetails) 5F2Functionpin2Holdtimesettingpin2(seeconfigurationsheetfordetails) 6F3Functionpin3Holdtimesettingpin3(seeconfigurationsheetfordetails) 7F4Functionpin4Detectionsensitivitysettingpin(seeconfigurationsheetfordetails) 8F5Functionpin5Daylightsensorthresholdsettingpin(seeconfigurationsheetfordetails) 9CDSDaylightsensorAsensorthatdetectstheintensityofexternallight. 10ANTAntennaMicrowavetransmittingandreceivingintegratedantenna 7.Functionalsequencelogicdiagram Notice:MIC01-5GH01hasnoPWMoutputfunction. MicrowaveModuleMIC01-5GH01Version:A1 ShenzhenMerrytekTechnologyCo.,Ltd Add:2 nd and3 rd floor,NO.3Building,380XiangshanAvenue,Luotian,Yanluo,Baoan,Shenzhen,518127,China Tel:+86(0)755-23057253Fax:+86(0)755-27863012Website:www.merrytek.com Page 5 of 8 8.Typicalapplicationcircuitandparameterconfiguration Declaration:F1,F2,F3arepinsforholdtimesetting,F4isfordetectionsensitivity,andF5isapintoswitch thedaylightsensor,detailsarespecifiedinthebelowsheet.Ifonlyfixedparameterareneeded,theDIP switchintheabovefigurecanbereplacedwith0Rresistance. S1(F1)、S2(F2)、S3(F3)ConfigurationSheet NumberSceneNumberS1(F1)、S2(F2)、S3(F3)StatusTheholdtimeoutputbyOpin 1QS1S1close,S2close,S3close60min 2QS2S1close,S2close,S3open30min 3QS3S1close,S2open,S3close10min 4QS4S1close,S2open,S3open5min 5QS5S1open,S2close,S3close3min 6QS6S1open,S2close,S3open1min 7QS7S1open,S2open,S3close30S 8QS8S1open,S2open,S3open2S(Factorytestedgear) MicrowaveModuleMIC01-5GH01Version:A1 ShenzhenMerrytekTechnologyCo.,Ltd Add:2 nd and3 rd floor,NO.3Building,380XiangshanAvenue,Luotian,Yanluo,Baoan,Shenzhen,518127,China Tel:+86(0)755-23057253Fax:+86(0)755-27863012Website:www.merrytek.com Page 6 of 8 S4(F4)ConfigurationSheet NumberSceneNumberS4(F4)StatusDetectionsensitivity 1QS1S4close50% 2QS2S4open100%(Factorytestedgear) S5(F5)ConfigurationSheet NumberSceneNumberS5(F5)StatusDaylightsensorthreshold 1QS1S5close30Lux 2QS2S5openDisable(Factorytestedgear) Notice 1)Detectionsensitivityreferstothesensitivityofthesensortodetecthumanmovementsignals.Thehigher sensitivitypercentage,thelongersensingdistance,andthelowersensitivitypercentage,theclosersensing distance. 2)TheholdtimeoutputbytheOpinisthetimewhentheoutputishigh,andthetimingcanbetriggered repeatedl…
Text truncated - open the document above for the full version.
CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2021-3-17> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2AI53-MIC01-5GH MIC01-5GH For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title: John Peng/Project Management Manager Company: Shenzhen Merrytek Technology Co., Ltd Address: 2nd and 3rd Floor, No.3 building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, China Phone: 0755-23057253 Fax: 0755-27863012 E-Mail: [email protected]
Shenzhen Merrytek Technology Co., Ltd 2nd and 3rd Floor, No.3 building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2021-3-17 To whom it may concern: We, Shenzhen Merrytek Technology Co., Ltd the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AI53-MIC01-5GH including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title: John Peng/Project Management Manager Company: Shenzhen Merrytek Technology Co., Ltd Address: 2nd and 3rd Floor, No.3 building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, China Phone: 0755-23057253 Fax: 0755-27863012 E-Mail: [email protected]
Shenzhen Merrytek Technology Co., Ltd 2nd and 3rd Floor, No.3 building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, China Limited Module Approval Request Letter Date: 2021-3-17 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subjects: Limited Module Approval Request Letter The Device,FCC ID: 2AI53-MIC01-5GH, is seeking FCC authorization as a modular transmitter. The EUT meets the requirement for modular approval as detailed in FCC Public Notice DA 00-1407. Compliance to each of the requirement is described below: (a) The radio elements must have the radio frequency circuitry be shielded. Physical/discrete and tuning capacitors may be located external to the shield, but must be on the module assembly. The modular without a shield. (b) The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable RSS standard under conditions of excessive data rates or over-modulation. Yes. (c) The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. The modular has an onboard 3.3V regulator(integrated in LQFN20). (d) The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module. The modular has one PCB Antenna which comply with the antenna requirement of Section 15.203. (e) The module shall be tested for compliance with the applicable standard in a stand-alone configuration, i.e. the module must not be inside another device during testing. The modular was tested in a standalone configuration apart from host units. (f) The module shall comply with the Category I equipment labeling requirements and CFR § 15.212(a)(1)(vi). The modular has its own FCC ID number. (g) The module shall comply with any applicable FCC RF exposure requirement which are based on the intended use/configurations. Not applicable,(Because the modular application FCC part 15.249 rules) (h) The modular transmitter complies with all applicable FCC rules. Instructions for maintaining compliance are given in the user instructions. Yes If you have any questions, please feel free to contact us at the address shown below Sincerely Name/Title: John Peng/Project Management Manager Company: Shenzhen Merrytek Technology Co., Ltd Address: 2nd and 3rd Floor, No.3 building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, China Phone: 0755-23057253 Fax: 0755-27863012 E-Mail: [email protected]
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AI53-MIC01-5GH 9.INTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AI53-MIC01-5GH Fig.3 Fig.4 Antenna
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AI53-MIC01-5GH This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 LABEL AND LOCATION Label Location FCC ID: 2AI53-MIC01-5GH
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AI53-MIC01-5GH 9.INTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AI53-MIC01-5GH Fig.3 Fig.4 Antenna
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AI53-MIC01-5GH Report No.:LCS210126006AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 28 FCC TEST REPORT FOR Shenzhen Merrytek Technology Co., Ltd Microwave Module Test Model No.: MIC01-5GH Prepared for : Shenzhen Merrytek Technology Co., Ltd Address : 2nd and 3rd Floor, No.3 building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Baoan District, Shenzhen, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : January 30, 2021 Number of tested samples : 1 Sample number : 210126006A Date of Test : January 30, 2021 ~ February 03, 2021 Date of Report : February 05, 2021 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AI53-MIC01-5GH Report No.:LCS210126006AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 28 FCC TEST REPORT FCC CFR 47 PART 15 C (15.249) Report Reference No. ................. : LCS210126006AEA Date of Issue................................... : February 05, 2021 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Baoan District, Shenzhen, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : Shenzhen Merrytek Technology Co., Ltd Address ........................................... : 2nd and 3rd Floor, No.3 building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, China Test Specification Standard ......................................... : FCC CFR 47 PART 15 C (15.249) / ANSI C63.10 Test Report Form No. ..................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. .................. : Microwave Module Trade Mark ..................................... : Test Model ...................................... : MIC01-5GH Ratings ............................................ : Input: 5-12V DC, Output: 3.3V DC Result ........................................... : Positive Compiled by: Supervised by: Approved by: Linda He/ File administrators Jin Wang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AI53-MIC01-5GH Report No.:LCS210126006AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 28 FCC -- TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS210126006AEA February 05, 2021 Date of issue Test Model.............................. : MIC01-5GH EUT......................................... : Microwave Module Applicant............................... : Shenzhen Merrytek Technology Co., Ltd Address.................................. : 2nd and 3rd Floor, No.3 building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Shenzhen Merrytek Technology Co., Ltd Address................................... : 2nd and 3rd Floor, No.3 building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, China Telephone............................... : / Fax.......................................... : / Factory................................... : Shenzhen Merrytek Technology Co., Ltd Address................................... : 2nd and 3rd Floor, No.3 building, 380 Xiangshan Avenue, Luotian, Yanluo, Baoan, Shenzhen, China Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AI53-MIC01-5GH Report No.:LCS210126006AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 28 Revision History Revision Issue Date Revisions Revised By 000 February 05, 2021 Initial Issue Gavin Liang SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AI53-MIC01-5GH Report No.:LCS210126006AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 28 TABLE OF CONTENTS 1. GENERAL INFORMATION ...................................................................................................... 6 1.1 Description of Device (EUT) ............................................................................................................ 6 1.2 Support equipment List .................................................................................................................... 6 1.3 External I/O Cable .................................................................…
Text truncated - open the document above for the full version.
SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AI53-MIC01-5GH _______________________________________________________________________________________________ 7. TEST SETUP PHOTOGRAPHS Photo of Radiated Emissions Measurement Below 1 GHz Above 1 GHz SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AI53-MIC01-5GH _______________________________________________________________________________________________ Power Line Conducted Emission
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 5.72 GHz - 5.88 GHz | - |

Lighting Control Switch(Motion Sensor)
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Motion Sensor
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Motion Sensor
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Lighting Control Switch(Motion Sensor)
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter