2AIEO-SMSHSShipment Logger with BLE

User Manual SmartMonitor SHIP S 1—Last update:9 December 2022 Table of Contents 1.Home..................................................................................................................................................4 2.Device application information.........................................................................................................5 2.1.Intended use..............................................................................................................................6 2.2.Battery information & use...........................................................................................................7 2.3.Device lifetime............................................................................................................................9 2.4.Air freight.................................................................................................................................10 2.5.Communication & Geographical Positioning.............................................................................11 2.5.1.Communication................................................................................................................12 2.5.2.Geographical Positioning.................................................................................................13 2.6.Device cleaning........................................................................................................................14 2.7.Device handling warnings........................................................................................................15 3.Device & display information..........................................................................................................17 3.1.Device......................................................................................................................................18 3.2.Display.....................................................................................................................................21 4.Device configuration.......................................................................................................................22 5.How to configure your device.........................................................................................................24 6.How to place your device................................................................................................................29 6.1.Site..........................................................................................................................................30 6.2.Shipment..................................................................................................................................31 7.Device info before monitoring start................................................................................................32 8.How to start monitoring..................................................................................................................33 9.Running device................................................................................................................................35 9.1.Device info when device is running..........................................................................................36 9.2.Device alarm while running......................................................................................................38 9.3.Cloud sync while running.........................................................................................................39 9.4.Manual read out while running.................................................................................................40 10.How to stop monitoring.................................................................................................................41 11.Additional functionalities..............................................................................................................46 11.1.Manual flight mode.................................................................................................................47 12.Warning..........................................................................................................................................49 12.1.Display warnings....................................................................................................................50 13.Disposal.........................................................................................................................................52 14.Certification & Standards..............................................................................................................53 15.FAQ & Glossary.............................................................................................................................55 Page 3 of 55 1.Home Berlinger SmartMonitorSHIPS Reference number:MKT-80031-EN Valid from 04/2023 Quick Setup – Monitoring for Shipment Use this flow to operate your device: Configure your device Place your device Start monitoring Stop monitoring Contact Berlinger Supportfor help. User Manual SmartMonitor SHIP S - 1_en Page 4 of 55 2.Device application information •Intended use •Battery information & use •Device lifetime •Air freight •Communication & Geographical Positioning •Device cleaning •Device handling warnings User Manual SmartMonitor SHIP S - 1_en Page 5 of 55 2.1.Intended use The SmartMonitor is designed for the monitoring of temperature sensitive pharmaceutical goods in storage and/or transport. The device collects and automatically uploads data to the compatible cloud solutionSmartView, for immediate decision-making on product integrity. SmartMonitorSHIPS Modular real-time device for shipments. Slim featured and single use. •Slim featured: temperature monitoring. •Real-time temperature monitoring: in combination with SmartMonitorSHIPL orSITEL viaBLE. •Single use: single use devices for challenging des…

Text truncated - open the document above for the full version.

Berlinger & Co. AG Tel. +41 71 982 88 11 Mitteldorfstrasse 2 Fax +41 71 982 88 39 9608 Ganterschwil [email protected] Switzerland www.berlinger.com Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Statement according to 2.911(d)(5)(i) and 2.911(d)(5)(ii) FCC ID: 2AIEO-SMSHS March, 31 st 2023, TO WHOM IT MAY CONCERN: Hereby we certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Further we certify that, as of the date of the filing of the application, Berlinger & Co. AG is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, _______________ Bernd Heisterkamp Berlinger & Co. AG Mitteldorfstrasse 2 9608 Ganterschwil Switzerland +41 71 982 88 11 [email protected]

Berlinger & Co. AG Tel. +41 71 982 88 11 Mitteldorfstrasse 2 Fax +41 71 982 88 39 9608 Ganterschwil [email protected] Switzerland www.berlinger.com Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA October 12 th 2023 Attestation Statement according to 2.911(d)(7) FCC ID: 2AIEO-SMSHS TO WHOM IT MAY CONCERN: We, Berlinger & Co. AG designate Americas Compliance Consulting LLC dba iCertifi (FRN 0033399411), to act as U.S. agent for service of process. ( Grantee FRN: 0025575176) Americas Compliance Consulting LLC dba iCertifi hereby acknowledges the obligation of the U.S. agent for service of process. Further Berlinger & Co. AG accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Sincerely, Americas Compliance Consulting LLC dba iCertifi 1001 SW Disk Dr. Suite 205, Bend, OR 97702, United States Paul Preston - President +1-866-885-4575 [email protected] _______________ (signature & company stamp) Bernd Heisterkamp Head of R&D +41 71 982 88 11 [email protected] _______________ (signature & company stamp) Thomas Bechter CEO Berlinger & Co. AG Mitteldorfstrasse 2 9608 Ganterschwil Switzerland _______________ (signature & company stamp)

Document Version 1.1 2020-10-30 SHORT-TERM CONFIDENTIALITY REQUEST for Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request Short-Term Confidentiality for the following product: For the product stated above, we request Short-Term Confidentiality for exhibits which contain External Photos, Internal Photos, Test Setup Photos, User Manual. We request Short-Term Confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device which is planned for: We are aware that the Short-Term Confidentiality must be released when the product is marketed. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Company Name: Phone: Company Address: Fax: E-mail: Contact Name: Signature: Signature Date: Check your GC here. Click Grantee Search. FCC ID: Grantee Code Equipment Product Code

Document Version 1.1 2020-10-30 LONG-TERM CONFIDENTIALITY REQUEST for Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 TO WHOM IT M AY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request Long-Term Confidentiality for the following product: For the product stated above, we request Long-Term Confidentiality for exhibits which contain Block Diagram, Operational Description, Parts List/Tune Up Info, Schematics, SDR Software/Security Info. The above exhibits contain ou r trade secrets and proprietary information that could be of benefit to o ur competitors. This information will not be publicly available. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Company Name: Phone: Company Address: Fax: E-mail: Contact Name: Signature: Signature Date: Check your GC here. Click Grantee Search. FCC I D: Grantee Code Equipment Product Code

Annex A No.1-5043/22-01-01_Annex_A External photos of the Device Under Test This document is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Marco Bertolino Lab Manager Radio Communications CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Annex A Photo 1 Photo 2 2023-01-24Document 1-5043/22-01-01_Annex_A2/3 Photo 3 Photo 4 - END OF DOCUMENT - 2023-01-24Document 1-5043/22-01-01_Annex_A3/3

www.berlinger.com Mi�eldorfstrasse 2 | 9608 Ganterschwil | Switzerland Model: BE14010 SmartMonitor SHIP S IP65 FCC ID: 2AIEO-SMSHS IC: 21299-SMSHS Original Size: SHIP S 49 mm 60 mm Learn More velcro / tape

Annex B No.1-5043/22-01-01_Annex_B Internal photos of the Device Under Test This document is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Marco Bertolino Lab Manager Radio Communications CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Annex B Photo 1 Photo 2 2023-01-24Document 1-5043/22-01-01_Annex_B2/3 Photo 3 Photo 4 - END OF DOCUMENT - 2023-01-24Document 1-5043/22-01-01_Annex_B3/3

© CTC advanced GmbH Page 1 of 2 BNetzA - CAB - 02/21 - 102 RF Exposure Evaluation according to KDB 447498 D01 v06 Report identification number: 1-5043/22-01-11_MPE_FCC Certification numbers and labeling requirements FCC ID 2AIEO-SMSHS This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorised: Alexander Hnatovskiy Marco Scigliano Lab Manager Testing Manager Radio Communications & EMC Radio Communications & EMC Report no.: 1-5043/22-01-11_MPE_FCC © CTC advanced GmbH Page 2 of 2 1. MPE at given distance (KDB 447498 D01 General RF Exposure Guidance v06) Equation from page 18 of OET Bulletin 65, Edition 97-01 S = PG / 4π R 2 where: S = Power density P = Power input to the antenna G = Antenna gain R = Distance to the center of radiation of the antenna PG = Output Power including antenna gain The table below is excerpted from Table 1B of 47 CFR 1.1310 titled “Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure” Frequency Range (MHz) Power Density (mW/cm 2 ) Averaging Time (minutes) 300 -1500 f/1500 30 1500 - 100000 1.0 30 where f = Frequency (MHz) 2. EUT technologies Declared minimum safety distance: 20 cm f Min f Max # P ERP P EIRP P RF Exp S Result S Limit % Bluetooth LE 2402 2480 A N/A 8.9 8.9 0.002 1.000 0.15% SRD Technology Frequency [MHz] Reference Power Density [mW/cm²] Share of Limit Output Power [dBm] Referenced Documents: # Results from: A Test Report 1-5043/22-01-07-A, pp. 20 & 24 3. Conclusion This prediction demonstrates the following: The power density levels for FCC at a distance of 20 cm are below the maximum levels allowed by regulations. Conclusion: RF exposure evaluation is not required.

Measurement Results No.1-5043/22-01-07_Annex_MR_A1 Test logging This document is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test/s performed: Michael Dorongovski Lab Manager Radio Communications CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Table of Content EUT Information3 Common 2G4 # Peak output power 3MHz/3MHz ~ BT LE 1 Msps4 FCC 15.247 # Maximum peak conducted output power DTS ~ BT LE 1 Msps8 FCC 15.247 # Bandwidth 6dB DTS ~ BT LE 1 Msps15 FCC 15.247 # Peak power spectral density DTS ~ BT LE 1 Msps19 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ BT LE 1 Msps23 FCC 15.247 # TX spurious conducted 20dBc ~ BT LE 1 Msps33 2022-12-05Document 1-5043/22-01-07_Annex_MR_A12/39 EUT Information EUT DEFINITION ManufacturerBerlinger & Co.AG TypeShipment Logger S Serial NumberPS069 Setup Number1.0 Version SWNI Version FWNI Version HWNI Comment 1 Comment 2 Temperature [°C] Min-30 Temperature [°C] Nom20 Temperature [°C] Max75 Voltage [V] Min3.3 Voltage [V] Nom3.6 Voltage [V] Max3.9 2022-12-05Document 1-5043/22-01-07_Annex_MR_A13/39 Common 2G4 # Peak output power 3MHz/3MHz ~ BT LE 1 Msps Test References TC Start29.11.2022 15:57:54 Ambit Temp [°C] | Humidity [rel%] 26.5 | 34 System Version3.3.3.0 Test SpecificationCommon 2G4 - none Test Method TC Version0.0.1 My DescriptionPeak Output Power conducted 3MHz/3MHz - BT LE 1 Msps Add. Information EUT Common Settings BT Low Energy Intermodulation Value N 3 Image Freq. Low | Mid | High [MHz] 0 | 0 | 0 Power Class2 1 Mbps supported True | TXpayload 255 | RXpayload 255 2 Mbps supported False | TXpayload 255 | RXpayload 255 Longrange S8 supported False | TXpayload 255 | RXpayload 255 Longrange S2 supportedFalse | TXpayload 255 | RXpayload 255 Signaling Settings USB_RS232 | HCI | 32 | 115200 | None | S1 | None | On Signaling RF Settings RF1com | 0 | 0 | On | User Interaction No Switch Matrix & Pathcompensation enabled Yes Test Parameter Technology to testBT LE 1 Msps Antenna Port used1 Temperaturenom Voltagenom Frequency low to testTrue | Freq [MHz] 2402 Frequency mid to testTrue | Freq [MHz] 2440 Frequency high to testTrue | Freq [MHz] 2480 Auto Control enabled Power Supply | Climatic Box No | No Additional Path Loss [dB]0.5 Switched PathEUT - SignalingUnit - SpectrumAnalyzer Test Equipment Signal analyzer,Rohde&Schwarz,FSV-30,1321.3008K30/103809,3.70 Signaling unit,Rohde&Schwarz,CMW,1201.0002k75/102550,4.0.62 Switch matrix,CTCadvanced,RSM-1 NI DAQ,29655273,NI 2022-12-05Document 1-5043/22-01-07_Annex_MR_A14/39 Test at TX 2402 MHz RESULT: Reference Power cond. Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Ref. Power 1MHz/1MHz cond. ------5.84dBmINFO Ref. Frequency------2402.200MHzINFO READ SA SETTINGS: RefLevel [dBm] | RefLevelOffset [dB] | InpAtt [dB]15.84 | 10.59 | 25 Start [MHz] | Stop [MHz]2399.500 | 2404.500 RBW [MHz] | VBW [MHz]3.000000 | 3.000000 Detector | TraceModePOS | MAXH Sweep: Time [ms] | Count | Points per Section | Type1000 | 10 | 1001 | SWE RESULT Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Peak Power------5.62dBmINFO Peak Power------3.647539mWINFO Frequency at Peak------2402.045MHzINFO Common 2G4 # Peak output power 3MHz-3MHz ~ BT LE 1 Msps 2022-12-05Document 1-5043/22-01-07_Annex_MR_A15/39 Test at TX 2440 MHz RESULT: Reference Power cond. Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Ref. Power 1MHz/1MHz cond. ------5.81dBmINFO Ref. Frequency------2440.200MHzINFO READ SA SETTINGS: RefLevel [dBm] | RefLevelOffset [dB] | InpAtt [dB]15.81 | 10.6 | 25 Start [MHz] | Stop [MHz]2437.500 | 2442.500 RBW [MHz] | VBW [MHz]3.000000 | 3.000000 Detector | TraceModePOS | MAXH Sweep: Time [ms] | Count | Points per Section | Type1000 | 10 | 1001 | SWE RESULT Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Peak Power------5.67dBmINFO Peak Power------3.689776mWINFO Frequency at Peak------2439.995MHzINFO Common 2G4 # Peak output power 3MHz-3MHz ~ BT LE 1 Msps 2022-12-05Document 1-5043/22-01-07_Annex_MR_A16/39 Test at TX 2480 MHz RESULT: Reference Power cond. Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Ref. Power 1MHz/1MHz cond. ------5.73dBmINFO Ref. Frequency------2480.200MHzINFO READ SA SETTINGS: RefLevel [dBm] | RefLevelOffset [dB] | InpAtt [dB]15.73 | 10.65 | 25 Start [MHz] | Stop [MHz]2477.500 | 2482.500 RBW [MHz] | VBW [MHz]3.000000 | 3.000000 Detector | TraceModePOS | MAXH Sweep: Time [ms] | Count | Points per Section | Type1000 | 10 | 1001 | SWE RESULT Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Peak Power------5.62dBmINFO Peak Power------3.647539mWINFO Frequency at Peak------2479.935MHzINFO Common 2G4 # Peak output power 3MHz-3MHz ~ BT LE 1 Msps General verdictPASS 2022-12-05Document 1-5043/22-01-07_Annex_MR_A17/39 FCC 15.247 # Maximum peak conducted output power DTS ~ BT LE 1 Msps Test References TC Start29.11.2022 16:09:09 Ambit Temp [°C] | Humidity [rel%] 26.3 | 33 System Version3.3.3.0 Test SpecificationFCC 15.247 - Test MethodDTS: KDB 558074 D01 V05 - Chapter 8.3.1.1 RBW ≥ DTS Bandwidth TC Version0.0.1 My DescriptionFCC 15.247 Maximum Peak Output Power Conducted DTS - BT LE 1 Msps Add. Information EUT Common Settings BT Low Energy Intermodulation Value N 3 Image Freq. Low | Mid | High [MHz] 0 | 0 | 0 Power Class2 1 Mbps supported True | TXpayload 255 | RXpayload 255 2 Mbps supported False | TXpayload 255 | RXpayload 255 Longrange S8 supported False | TXpayload 255 | RXpayload 255 Longrange S2 supportedFalse | TXpayload 255 | RXpayload 255 Signaling Settings USB_RS232 | HCI | 32 | 115200 | None | S1 | None | On Signaling RF Settings RF1com | 0 | 0 | On | User Interaction No Switch Matrix & Pathcompensation enabled Yes Test Parameter Technology to testBT LE 1 Msps Antenna Port used1 Temperaturenom Voltagenom Frequency low…

Text truncated - open the document above for the full version.

TEST REPORT Test report no.: 1-5043_22-01-07-A Testing laboratory Applicant CTC advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://www.ctcadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate starting with the registration number: D-PL-12076-01. Berlinger & Co.AG Mitteldorfstrasse 2 9608 Ganterschwil / SWITZERLAND Phone: -/- Contact: Bernd Heisterkamp e-mail: [email protected] Manufacturer Berlinger & Co.AG Mitteldorfstrasse 2 9608 Ganterschwil / SWITZERLAND Test standard/s FCC - Title 47 CFR Part 15 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 247 Issue 2 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence - Exempt Local Area Network (LE-LAN) Devices For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: SmartMonitor Model name: Shipment Logger S FCC ID: 2AIEO-SMSHS ISED certification number: 21299-SMSHS Frequency: 2400 MHz to 2483.5 MHz Technology tested: Bluetooth ® LE Antenna: Integrated antenna Power supply: 3.6 V DC by battery Temperature range: -30°C to +75°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: p.o. Marco Bertolino Michael Dorongovski Lab Manager Lab Manager Radio Communications Radio Communications Test report no.: 1-5043_22-01-07-A © CTC advanced GmbH Page 2 of 45 1 Table of contents 1 Table of contents ............................................................................................................................................. 2 2 General information ......................................................................................................................................... 3 2.1 Notes and disclaimer ............................................................................................................................ 3 2.2 Application details ................................................................................................................................ 3 2.3 Test laboratories sub-contracted ......................................................................................................... 3 3 Test standard/s, references and accreditations .............................................................................................. 4 4 Reporting statements of conformity – decision rule ...................................................................................... 5 5 Test environment ............................................................................................................................................. 6 6 Test item .......................................................................................................................................................... 6 6.1 General description ............................................................................................................................... 6 6.2 Additional information .......................................................................................................................... 6 7 Sequence of testing ......................................................................................................................................... 7 7.1 Sequence of testing radiated spurious 9 kHz to 30 MHz ..................................................................... 7 7.2 Sequence of testing radiated spurious 30 MHz to 1 GHz .................................................................... 8 7.3 Sequence of testing radiated spurious 1 GHz to 18 GHz ..................................................................... 9 7.4 Sequence of testing radiated spurious above 18 GHz ....................................................................... 10 8 Description of the test setup.......................................................................................................................... 11 8.1 Shielded semi anechoic chamber ....................................................................................................... 12 8.2 Shielded fully anechoic chamber ........................................................................................................ 13 8.3 Radiated measurements > 18 GHz ...................................................................................................... 14 8.4 Conducted measurements Bluetooth system .................................................................................... 15 8.5 AC conducted ...................................................................................................................................... 16 9 Measurement uncertainty .............................................................................................................................. 17 10 Summary of measurement results ......................................................................................................... 18 11 Additional comments .............................................................................................................................. 19 12 Measurement results .............................................................................................................................. 20 12.1 System gain ..................................................................................................................................... 20 12.2 Power spectral density ........................................…

Text truncated - open the document above for the full version.

Annex D No.1-5043/22-01-01_Annex_D Setup photos of the Device Under Test This document is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Marco Bertolino Lab Manager Radio Communications CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Annex D Photo 1 Photo 2 2023-01-24Document 1-5043/22-01-01_Annex_D2/8 Photo 3 Photo 4 2023-01-24Document 1-5043/22-01-01_Annex_D3/8 Photo 5 Photo 6 2023-01-24Document 1-5043/22-01-01_Annex_D4/8 Photo 7 Photo 8 2023-01-24Document 1-5043/22-01-01_Annex_D5/8 Photo 9 Photo 10 2023-01-24Document 1-5043/22-01-01_Annex_D6/8 Photo 11 Photo 12 2023-01-24Document 1-5043/22-01-01_Annex_D7/8 Photo 13 Photo 14 - END OF DOCUMENT - 2023-01-24Document 1-5043/22-01-01_Annex_D8/8