
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
SmartSystem SITE L Datalogger Operators Manual Draft version 01 Operatots Manual / SmartMonitor SITE L page 2 of 26 Table of Contents 1 Safety instructions ....................................................................................................................... 4 2 Quick Guide ................................................................................................................................. 5 2.1 Quick Start if configuration is already loaded on the device ................................................... 5 2.2 Quick Start if configuration needs first loaded to the device .................................................. 6 3 Device view and description ........................................................................................................ 7 4 Display.......................................................................................................................................... 8 4.1 7-digit display ........................................................................................................................... 9 5 Multifunctional button ................................................................................................................ 9 6 Confirmation LED ....................................................................................................................... 10 7 Light sensor ................................................................................................................................ 10 8 Humidity and pressure sensor ................................................................................................... 11 9 Tilt / Shock / Vibration ............................................................................................................... 11 10 Configuration ............................................................................................................................. 12 11 Start/Stop .................................................................................................................................. 13 11.1 Start ....................................................................................................................................... 13 11.2 Stop ........................................................................................................................................ 14 12 Start delay .................................................................................................................................. 14 12.1 Start SmartMonitor SITE L with start delay ........................................................................... 14 12.2 Start SmartMonitor SITE L with scheduled start ................................................................... 15 13 Usage Process ............................................................................................................................ 16 13.1 Preparation ............................................................................................................................ 16 13.1.1 Display check ................................................................................................................. 16 13.1.2 Housing check ................................................................................................................ 16 13.2 Setup ...................................................................................................................................... 16 13.2.1 WIFI reset ....................................................................................................................... 17 13.2.2 Download Configuration ................................................................................................ 17 13.2.3 Review/Check configuration .......................................................................................... 17 13.3 Start ....................................................................................................................................... 17 13.3.1 Start delay ...................................................................................................................... 17 13.3.2 Scheduler Start................................................................................................................... 17 13.4 Recording ............................................................................................................................... 17 13.4.1 Assess state of goods and information .......................................................................... 18 13.5 Stop ........................................................................................................................................ 18 13.5.1 Read out ......................................................................................................................... 18 Draft version 01 Operatots Manual / SmartMonitor SITE L page 3 of 26 13.5.2 Upload data manually of read out data to Berlinger SmartView software (version 6.0 and higher). .................................................................................................................................... 18 13.5.3 Return device ................................................................................................................. 18 14 Where to place SmartMonitor SITE L ........................................................................................ 19 15 External Sensor .......................................................................................................................... 20 15.1 Connect an external sensor to SmartMonitor SITE L device ................................................. 21 15.2 Multi Sensor Adapter ............................................................................................................. 22 16 Troubleshooting ............................................................................................................…
Text truncated - open the document above for the full version.
Antaris Solutions B.V,Berlinger & Co. AG,Berlinger Special AG,Berlinger USA LLC Federal Communication Commission Equipment Authorization Devision, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Certification and Engineering Bureau Innovation, Science and Economic Development Canada 3701 Carling Ave. Bldg. 94 Ottawa, On K2H 8S2 26.Okt.2021 TO WHOM IT MAY CONCERN FCC ID: 2AIEO-SMSIL, IC: 21299-SMSIL, HVIN: BE14001 We the undersigned, hereby authorize Zühlke Engineering AG, Zürcherstrasse 39J, 8952 Schlieren, Mr. Lukas Gaetzi, [email protected] to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Zühlke Engineering AG on our behalf shall have the same effect as acts of our own. The authorization is valid from the date of this letter up to 31 December 2022. Sincerely, Thomas Wenger, VP T&O Bernd Heisterkamp, Head of R&D Berlinger & Co. AG Berlinger & Co. AG Mitteldorfstrasse 2 Mitteldorfstrasse 2 9608 Ganterschwil 9608 Ganterschwil Switzerland Switzerland
Document Version 1.1 2020-10-30 LONG-TERM CONFIDENTIALITY REQUEST for Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 TO WHOM IT M AY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request Long-Term Confidentiality for the following product: For the product stated above, we request Long-Term Confidentiality for exhibits which contain Block Diagram, Operational Description, Parts List/Tune Up Info, Schematics, SDR Software/Security Info. The above exhibits contain ou r trade secrets and proprietary information that could be of benefit to o ur competitors. This information will not be publicly available. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Company Name: Phone: Company Address: Fax: E-mail: Contact Name: Signature: Signature Date: Check your GC here. Click Grantee Search. FCC I D: Grantee Code Equipment Product Code
Antaris Solutions B.V,Berlinger & Co. AG,Berlinger Special AG,Berlinger USA LLC 22 April 2022 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Certification and Engineering Bureau Innovation, Science and Economic Development Canada Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 ATTESTATION STATEMENT Declaration on Electrically Identical Models TO WHOM IT MAY CONCERN We, Berlinger & Co. AG, declare on our sole responsibility that the Bluetooth LE part of model BE14001 with IC Certification Number: 21299-SMSIL FCC ID: 2AIEO-SMSIL is identical in hardware and software to the certified module DA16600MOD-AAC4WA32 with IC Certification Number: 25650-DA16600MC FCC ID: 2AU49-DA16600MC If you have any questions, please feel free to contact us at the address shown below Sincerely, Bernd Heisterkamp, Head of R&D Berlinger & Co. AG Mitteldorfstrasse 2 9608 Ganterschwil Switzerland Phone +41 71 982 88 11
Antaris Solutions B.V,Berlinger & Co. AG,Berlinger Special AG,Berlinger USA LLC 22 April 2022 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Certification and Engineering Bureau Innovation, Science and Economic Development Canada Spectrum Engineering Branch 3701 Carling Avenue, Building 94 Ottawa, Ontario K2H 8S2 ATTESTATION STATEMENT Declaration on Electrically Identical Models TO WHOM IT MAY CONCERN We, Berlinger & Co. AG, declare on our sole responsibility that the cellular part of model BE14001 with IC Certification Number: 21299-SMSIL FCC ID: 2AIEO-SMSIL is identical in hardware and software to the models BE14002, BE14003 with IC Certification Number: 21299-SMSHL FCC ID: 2AIEO-SMSHL Therefore CTC advanced GmbH Test Report 1-2685/21-03-07-A, 1-2685/21-03-13, 1- 2685/21-03-14 remains applicable. If you have any questions, please feel free to contact us at the address shown below Sincerely, Bernd Heisterkamp, Head of R&D Berlinger & Co. AG Mitteldorfstrasse 2 9608 Ganterschwil Switzerland Phone +41 71 982 88 11
Annex A 1-2685/21-02-01_AnnexA External photos of the Equipment Under Test This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Michael Dorongovski Lab Manager Radio Communications CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1 Photo 2 2022-04-22Document No. 1-2685/21-02-01_AnnexA2/5 Photo 3 Photo 4 2022-04-22Document No. 1-2685/21-02-01_AnnexA3/5 Photo 5 2022-04-22Document No. 1-2685/21-02-01_AnnexA4/5 Document history VersionApplied changesDate of release initial release2022-04-22 - END OF DOCUMENT - 2022-04-22Document No. 1-2685/21-02-01_AnnexA5/5
https://www.berlinger.com WLAN MAC: 01-23-45-67-89-AB IMEI: XXXXXXXXXXXXXXX IP65 FCC ID: 2AIEO-SMSIL IC: 21299-SMSIL velcro / tape velcro / tape Mitteldorfstrasse 2 | 9608 Ganterschwil | Switzerland Model: BE14001 SmartMonitor SITE L 49 mm 86 mm Original Size: SITE L https://www.berlinger.com velcro / tape velcro / tape Mitteldorfstrasse 2 | 9608 Ganterschwil | Switzerland Model: BE14002 SmartMonitor SHIP L IMEI: XXXXXXXXXXXXXXX IP65 FCC ID: 2AIEO-SMSHL IC: 21299-SMSHL 49 mm Original Size: SHIP L https://www.berlinger.com velcro / tape velcro / tape Mitteldorfstrasse 2 | 9608 Ganterschwil | Switzerland Model: BE14003 SmartMonitor SHIP M IMEI: XXXXXXXXXXXXXXX IP65 FCC ID: 2AIEO-SMSHL IC: 21299-SMSHL 49 mm Original Size: SHIP M
© CTC advanced GmbH Page 1 of 4 BNetzA - CAB - 02/21 - 102 Maximum Permissible Exposure (MPE) & Exposure evaluation Report identification number: 1-2685/21-02-09 MPE (FCC_ISED) Certification numbers and labeling requirements FCC ID 2AIEO-SMSIL ISED number 21299-SMSIL HVIN (Hardware Version Identification Number) BE14001 PMN (Product Marketing Name) SmartMonitor FVIN (Firmware Version Identification Number) V01 HMN (Host Marketing Name) -/- This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorised: Alexander Hnatovskiy Marco Scigliano Lab Manager Testing Manager Radio Communications & EMC Radio Communications & EMC Report no.: 1-2685/21-02-09 © CTC advanced GmbH Page 2 of 4 EUT technologies: Technologies: Power Average Conducted [dBm] Power ERP/EIRP 2 [dBm] Tune-Up Correction + ERP Correction 3 + GSM Correction 4 [dBm] Max. Power for RF Exposure [dBm] Measured Value Max. declared (Tune-Up) Difference 1 (Tune-Up Correction) E GPRS 850 MHz 32.2 34.0 1.8 29.3 -5.0 24.3 E GPRS 1900 MHz 29.3 31.0 1.7 32.3 -7.3 25.0 LTE FDD 2 1900 MHz Cat M1 21.2 22.0 0.8 24.2 0.8 25.0 LTE FDD 4 1750 MHz Cat M1 20.6 22.0 1.4 24.3 1.4 25.7 LTE FDD 5 850 MHz Cat M1 20.6 22.0 1.4 17.5 3.6 21.1 LTE FDD 12 700 MHz Cat M1 20.5 22.0 1.5 13.1 3.7 16.8 LTE FDD 13 700 MHz Cat M1 20.5 22.0 1.5 15.2 3.7 18.9 LTE FDD 2 1900 MHz Cat NB2 19.9 21.0 1.1 22.9 1.1 24.0 LTE FDD 4 1750 MHz Cat NB2 19.5 21.0 1.5 23.4 1.5 24.9 LTE FDD 5 850 MHz Cat NB2 19.5 21.0 1.5 16.6 3.7 20.3 LTE FDD 12 700 MHz Cat NB2 20.4 21.0 0.6 13.0 2.8 15.8 LTE FDD 13 700 MHz Cat NB2 19.9 21.0 1.1 14.7 3.3 18.0 Bluetooth LE 2450 MHz N/A N/A N/A -0.9 (EIRP) N/A 2.0 WLAN 2450 MHz 20.4 N/A N/A 18.6 (EIRP) N/A 20.5 1 Difference (Tune-Up Correction) = Max. declared conducted power (Tune-Up) – measured conducted Power 2 Output power listed is ERP below 1 GHz and EIRP above 1 GHz 3 ERP Correction: EIRP = 2.15 dB + ERP 4 GSM Correction: 1/8 Time Slots → 10 log (1/8) = - 9.03 dB Test results in CTC advanced GmbH report: 1-2685_21-02-03&11 (Bluetooth LE) 1-2685_21-02-12 (WLAN) 1-2685_21-03-07 (GSM) 1-2685_21-03-13 (LTE Cat M1) 1-2685_21-03-14 (LTE Cat NB2) Report no.: 1-2685/21-02-09 © CTC advanced GmbH Page 3 of 4 Collocation overview: Active scenario: Technology 1 2 3 4 E GPRS / LTE x x WLAN / BT LE x x Prediction of MPE limit at given distance - FCC Equation from page 18 of OET Bulletin 65, Edition 97-01 S = PG / 4π R 2 where: S = Power density P = Power input to the antenna G = Antenna gain R = Distance to the center of radiation of the antenna PG = Output Power including antenna gain The table below is excerpted from Table 1B of 47 CFR 1.1310 titled “Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure” Frequency Range (MHz) Power Density (mW/cm 2 ) Averaging Time (minutes) 300 -1500 f/1500 30 1500 - 100000 1.0 30 where f = Frequency (MHz) Prediction: worst case Technologies:GSMGSMLTEWLAN Frequency (MHz)850190017502450 PGDeclared max power (EIRP)24.325.025.720.5dBm RDistance20.020.020.020.0cm SMPE limit for uncontrolled exposure0.56671.26671.16671.0000 mW/cm 2 Calculated Power density:0.05360.06290.07400.0223mW/cm² Calculated percentage of Limit: 9.45%4.97%6.34%2.23% Scenario 1: GSM / LTE + SRD Calculated percentage of Limit: 11.69% Collocation: This prediction demonstrates the following: The power density levels for FCC at a distance of 20 cm are below the maximum levels allowed by regulations. Report no.: 1-2685/21-02-09 © CTC advanced GmbH Page 4 of 4 Prediction of MPE limit at given distance - ISED RSS-102, general limitations for E- and H- Field Reference levels for general public (uncontrolled environment) exposure to time-varying electric and magnetic fields According to: RSS 102-ISSUE 05 Frequency Range (MHz) Power density (W/m²) Reference Period (minutes) 0.003-10 -- Instantaneous* 0.1-10 -- 6** 1.1-10 -- 6** 10-20 2 6 20-48 8.944 / ƒ 0.5 6 48-300 1.291 6 300-6000 0.02619 × ƒ 0.6834 6 6000-15000 10 6 15000-150000 10 616000 / f 1.2 150000-300000 6.67 × 10 -5 × ƒ 616000 / f 1.2 Note: f is frequency in MHz. * Based on nerve stimulation (NS). ** Based on specific absorption rate (SAR). NOTE: The resulting Limit for 850MHz is 2.63W/m² The resulting Limit for 2450MHz is 5.42W/m² Prediction: worst case Conclusion: RF exposure evaluation is not required. GSM / LTE WLAN Frequency 850 2450 MHz R Distance 20.0 20.0 cm P G Maximum EIRP 24.3 20.5 dBm P G Maximum EIRP 269.2 112.2 mW S Power density 0.5355 0.2232 W/m² Exclusion Limit from above: 2.63 5.42 W/m² Calculated percentage of Limit: 20.36% 4.12% Scenario 1: GSM / LTE + SRD Calculated percentage of Limit: 24.48%
TEST REPORT Test report no.: 1-2685/21-03-07-A Testing laboratory Applicant CTC advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://www.ctcadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate starting with the registration number: D-PL-12076-01. Berlinger & Co.AG Mitteldorfstrasse 2 9608 Ganterschwil / SWITZERLAND Phone: +41 71 982 88 11 Contact: Bernd Heisterkamp e-mail: [email protected] Manufacturer Berlinger & Co.AG Mitteldorfstrasse 2 9608 Ganterschwil / SWITZERLAND Test standard/s FCC - Title 47 CFR Part 22 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 22 - Public mobile services FCC - Title 47 CFR Part 24 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 24 - Personal communications services For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: SmartMonitor Model name: Shipment Logger L/M, Site Logger FCC ID: 2AIEO-SMSHL, 2AIEO-SMSIL ISED certification number: 21299-SMSHL, 21299-SMSIL Frequency: GSM 850 MHz and GSM 1900 MHz Technology tested: GSM Antenna: Integrated antenna Power supply: 5 V DC by external mains adapter 3.6 V DC by battery Temperature range: -30°C to +75°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Andreas Luckenbill Marco Bertolino Head of Department Lab Manager Radio Communications Radio Communications Test report no.: 1-2685/21-03-07-A © CTC advanced GmbH Page 2 of 77 1 Table of contents 1 Table of contents ............................................................................................................................................. 2 2 General information ......................................................................................................................................... 3 2.1 Notes and disclaimer ............................................................................................................................ 3 2.2 Application details ................................................................................................................................ 3 2.3 Test laboratories sub-contracted ......................................................................................................... 3 3 Test standard/s, references and accreditations .............................................................................................. 4 4 Reporting statements of conformity – decision rule ...................................................................................... 5 5 Test environment ............................................................................................................................................. 6 6 Test item .......................................................................................................................................................... 6 6.1 General description ............................................................................................................................... 6 6.2 Additional information .......................................................................................................................... 6 7 Description of the test setup............................................................................................................................ 7 7.1 Shielded semi anechoic chamber ......................................................................................................... 8 7.2 Shielded fully anechoic chamber .......................................................................................................... 9 7.3 Radiated measurements > 18 GHz ...................................................................................................... 10 7.4 Conducted measurements normal and extreme conditions ............................................................... 11 8 Measurement uncertainty ............................................................................................................................ 12 9 Summary of measurement results ................................................................................................................ 13 9.1 GSM 850 .............................................................................................................................................. 13 9.2 PCS 1900 ............................................................................................................................................. 13 10 Results GSM 850 ........................................................................................................................................ 14 10.1 RF output power .............................................................................................................................. 14 10.2 Frequency stability .......................................................................................................................... 17 10.3 Spurious emissions radiated ........................................................................................................... 19 10.4 Spurious emissions conducted ....................................................................................................... 25 10.5 Block edge compliance .................................................................................................................... 33 10.6 Occupied bandwidth ...............................................................…
Text truncated - open the document above for the full version.
BNetzA-CAB-02/21-102 TEST REPORT Test report no.: 1-2685/21-03-13 Testing laboratory Applicant CTC advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://www.ctcadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate starting with the registration number: D-PL-12076-01. Berlinger & Co.AG Mitteldorfstrasse 2 9608 Ganterschwil / SWITZERLAND Phone: +41 71 982 88 11 Contact: Bernd Heisterkamp e-mail: [email protected] Manufacturer Berlinger & Co.AG Mitteldorfstrasse 2 9608 Ganterschwil / SWITZERLAND Test standard/s FCC - Title 47 CFR Part 22 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 22 - Public mobile services FCC - Title 47 CFR Part 24 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 24 - Personal communications services For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: SmartMonitor Model name: Shipment Logger L/M; Site Logger FCC ID: 2AIEO-SMSHL, 2AIEO-SMSIL ISED certification number: 21299-SMSHL, 21299-SMSIL Frequency: LTE band 2; 4; 5; 12 and 13 Technology tested: LTE Cat M Antenna: Integrated antenna Power supply: 5 V DC by external mains adapter / 3.6 V DC by battery Temperature range: -30°C to +75°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Andreas Luckenbill Marco Bertolino Head of Department Lab Manager Radio Communications Radio Communications Test report no.: 1-2685/21-03-13 © CTC advanced GmbH Page 2 of 188 1 Table of contents 1 Table of contents ............................................................................................................................................. 2 2 General information ......................................................................................................................................... 4 2.1 Notes and disclaimer ............................................................................................................................ 4 2.2 Application details ................................................................................................................................ 4 2.3 Test laboratories sub-contracted ......................................................................................................... 4 3 Test standard/s, references and accreditations .............................................................................................. 5 4 Reporting statements of conformity – decision rule ...................................................................................... 6 5 Test environment ............................................................................................................................................. 7 6 Test item........................................................................................................................................................... 7 6.1 General description ............................................................................................................................... 7 6.2 Additional information .......................................................................................................................... 7 7 Description of the test setup ............................................................................................................................ 8 7.1 Shielded semi anechoic chamber ......................................................................................................... 9 7.2 Shielded fully anechoic chamber ........................................................................................................ 10 7.3 Radiated measurements > 18 GHz...................................................................................................... 11 7.4 Conducted measurements normal and extreme conditions ............................................................... 12 8 Sequence of testing ....................................................................................................................................... 13 8.1 Sequence of testing radiated spurious 9 kHz to 30 MHz ................................................................... 13 8.2 Sequence of testing radiated spurious 30 MHz to 1 GHz .................................................................. 14 8.3 Sequence of testing radiated spurious 1 GHz to 18 GHz ................................................................... 15 8.4 Sequence of testing radiated spurious above 18 GHz ....................................................................... 16 9 Measurement uncertainty .............................................................................................................................. 17 10 Summary of measurement results ............................................................................................................. 18 10.1 Part 22/RSS-132: LTE band 5 ......................................................................................................... 18 11 RF measurements ...................................................................................................................................... 19 11.1 Description of test setup ................................................................................................................. 19 11.2 Results LTE band 5 .......................................................................................................................... 1…
Text truncated - open the document above for the full version.
BNetzA-CAB-02/21-102 TEST REPORT Test report no.: 1-2685/21-03-14 Testing laboratory Applicant CTC advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://www.ctcadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate starting with the registration number: D-PL-12076-01. Berlinger & Co.AG Mitteldorfstrasse 2 9608 Ganterschwil / SWITZERLAND Phone: +41 71 982 88 11 Contact: Bernd Heisterkamp e-mail: [email protected] Manufacturer Berlinger & Co.AG Mitteldorfstrasse 2 9608 Ganterschwil / SWITZERLAND Test standard/s FCC - Title 47 CFR Part 22 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 22 - Public mobile services FCC - Title 47 CFR Part 24 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 24 - Personal communications services For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: SmartM…
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|---|---|---|---|---|
| 24 | 27 | 777 MHz - 787 MHz | 29.00 mW | 186KG7D | 0.08 ppm |

Shipment Logger with BLE
Equipment Class
DTS - Digital Transmission System
Shipment Logger with Cellular/BLE
Equipment Class
DTS - Digital Transmission System