2AIZN-X659BMobile Phone

INFINIX MOBILITY LIMITED

Click to zoom

Application Details

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Date of Grant: Feb 24, 2021
Application Purpose: Original Equipment
Date of Application: Feb 22, 2021
Equipment Note: Mobile Phone
Frequency Range: 2402.00000000 - 2480.00000000
Company: INFINIX MOBILITY LIMITED
Country: Hong Kong

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Infinix X659B User Manual (Av&Aw) 1 E E x x p p l l o o s s i i o o n n d d i i a a g g r r a a m m s s p p e e c c i i f f i i c c a a t t i i o o n n 1 FL(CTP+LCM) 2 REC DECO 3 Fornt housing Assembly 4 Fornt CAM rubber 5 Front Camera 6 2in1 receiver spk 7 LT sensor Seal rubber 8 FPC REC SPK 9 PCBA Main 10 Back CAM Conn foam 11 Fingerchip 12 Back main Camera 13 Back sub Camera 14 Sub Cam rubber 15 REC SPK con fb 16 Front cam con fb 17 UP frame asm 18 M1.4xL3.5 SCREW 19 Finger frame 20 M1.4*L1.2*D3.5 SCREW 21 3in1 card holder 22 Batttery cover asm 23 Side key 24 Back Cam Lens 25 M1.4xL3.5 SCREW 26 Down frame asm 27 Bat con rubber 28 Finger Con foams 29 LCM FPC con rubber 30 USB rubber 31 Side key FPC 32 Ear rubber 33 Battery 34 SUB PCBA 35 Coaxial cable 36 Moto 2 Know your phone 1. Front camera 2. Volume + key 3. Volume - key 4. Power key ① 3 SIM/SD card installation 1. Power off mobile. 2. Refer to the following picture for SIM / SD card installation. 4 Charging the phone You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone). 1. Please remind the front and back of the plug. 2. Use only INFINIX charger and cables. Other chargers or cables may damage the device. This will invalidate your phone warranty. FCC Statement 5 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.` Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of 6 comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.429W/Kg and when worn on the body, as described in this user guide, is 0.225W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 0.265W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: 2AIZN-X659B Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The 7 standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including t…

Text truncated - open the document above for the full version.

Cover Letter(s)

INFINIX MOBILITY LIMITED DATE :2021-2-4 Equipment Autorisation Division Federal Communications Commission 7345 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AIZN-X659B Product Name: Mobile Phone Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics  Block diagram  Operation description  Tune up These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2021-2-4 By: Yiting Luo Signature Printed Title: Manager On behalf of : INFINIX MOBILITY LIMITED Telephone: +86 0755-61803856

Cover Letter(s)

INFINIX MOBILITY LIMITED DATE:2021-2-4 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent On our behalf, I appoint JianYan Testing Group Shenzhen Co., Ltd.; No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Communit y,Xinqiao Street, Bao’an District, Shenzhen, Guangdong,People’s Republic of China.;Bru ce.Zhang, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with INFINIX MOBILITY LIMITED/ ROOM 604 6/F SOUTH TOWER WORLD FINANCE CTR HARBOUR CITY 17 CANTON ROAD TST KL Hong Kong Dated this 2021-2-4 By: Yiting Luo Signature Printed Title: Manager On behalf of : INFINIX MOBILITY LIMITED Telephone: +86 0755-61803856

Cover Letter(s)

INFINIX MOBILITY LIMITED DATE :2021-2-4 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AIZN-X659B Product Name: Mobile Phone Request for Short-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.:  Test Setup Photos  External Photos  Internal Photos  User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. <Signature> Name Yiting Luo Title manager Company INFINIX MOBILITY LIMITED

External Photos

ID Label/Location Info

label location label location

Internal Photos

Report No: JYTSZB-R12-2100266 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 48 of 56 Report No: JYTSZB-R12-2100266 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 49 of 56 Report No: JYTSZB-R12-2100266 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 50 of 56 Report No: JYTSZB-R12-2100266 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 51 of 56 Report No: JYTSZB-R12-2100266 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 52 of 56 Report No: JYTSZB-R12-2100266 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 53 of 56 Report No: JYTSZB-R12-2100266 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 54 of 56 Report No: JYTSZB-R12-2100266 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 55 of 56 Report No: JYTSZB-R12-2100266 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 56 of 56 ------End of report------

Test Report

JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZB-R12-2100269 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the JYT product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC REPORT (Bluetooth) Applicant: INFINIX MOBILITY LIMITED Address of Applicant: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31- 35 SHAN MEI STREET FOTAN NT Equipment Under Test (EUT) Product Name: Mobile Phone Model No.: X659B Trade mark: Infinix FCC ID: 2AIZN-X659B Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: 09 Jan., 2021 Date of Test: 10 Jan., to 25 Jan., 2021 Date of report issued: 26 Jan., 2021 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No: JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 39 2 Version Version No. Date Description 00 26 Jan., 2021 Original Tested by: Date: 26 Jan., 2021 Test Engineer Reviewed by: Date: 26 Jan., 2021 Project Engineer Report No: JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 39 3 Contents Page 1 COVER PAGE ............................................................................................................................................................. 1 2 VERSION ..................................................................................................................................................................... 2 3 CONTENTS ................................................................................................................................................................. 3 4 TEST SUMMARY ........................................................................................................................................................ 4 5 GENERAL INFORMATION ........................................................................................................................................ 5 5.1 CLIENT INFORMATION ....................................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................... 5 5.3 TEST ENVIRONMENT AND MODE ........................................................................................................................ 6 5.4 DESCRIPTION OF SUPPORT UNITS .................................................................................................................... 6 5.5 MEASUREMENT UNCERTAINTY .......................................................................................................................... 6 5.6 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD ....................................................................... 6 5.7 LABORATORY FACILITY ..................................................................................................................................... 6 5.8 LABORATORY LOCATION ................................................................................................................................... 6 5.9 TEST INSTRUMENTS LIST .................................................................................................................................. 7 6 TEST RESULTS AND MEASUREMENT DATA ...................................................................................................... 8 6.1 ANTENNA REQUIREMENT .................................................................................................................................. 8 6.2 CONDUCTED EMISSIONS .................................................................................................................................. 9 6.3 CONDUCTED OUTPUT POWER ........................................................................................................................ 12 6.4 20DB OCCUPY BANDWIDTH ............................................................................................................................ 13 6.5 CARRIER FREQUENCIES SEPARATION ............................................................................................................. 14 6.6 HOPPING CHANNEL NUMBER .......................................................................................................................... 15 6.7 DWELL TIME ........................................................................................................…

Text truncated - open the document above for the full version.

Test Report

Report No.:JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 1 of 44 Test Data Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Duty Factor (dB) Total Power (dBm) Limit (dBm) Verdict NVNT 1-DH1 2402 Ant1 6.361 0 6.361 30 Pass NVNT 1-DH1 2441 Ant1 5.428 0 5.428 30 Pass NVNT 1-DH1 2480 Ant1 4.61 0 4.61 30 Pass NVNT 2-DH1 2402 Ant1 5.747 0 5.747 21 Pass NVNT 2-DH1 2441 Ant1 4.623 0 4.623 21 Pass NVNT 2-DH1 2480 Ant1 3.886 0 3.886 21 Pass NVNT 3-DH1 2402 Ant1 5.733 0 5.733 21 Pass NVNT 3-DH1 2441 Ant1 4.596 0 4.596 21 Pass NVNT 3-DH1 2480 Ant1 3.9 0 3.9 21 Pass Power NVNT 1-DH1 2402MHz Ant1 Report No.:JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 44 Power NVNT 1-DH1 2441MHz Ant1 Power NVNT 1-DH1 2480MHz Ant1 Report No.:JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 44 Power NVNT 2-DH1 2402MHz Ant1 Power NVNT 2-DH1 2441MHz Ant1 Report No.:JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 4 of 44 Power NVNT 2-DH1 2480MHz Ant1 Power NVNT 3-DH1 2402MHz Ant1 Report No.:JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 5 of 44 Power NVNT 3-DH1 2441MHz Ant1 Power NVNT 3-DH1 2480MHz Ant1 -20dB Bandwidth Condition Mode Frequency (MHz) Antenna -20 dB Bandwidth (MHz) Limit -20 dB Bandwidth (MHz) Verdict NVNT 1-DH1 2402 Ant1 0.721 Within authorization band Pass NVNT 1-DH1 2441 Ant1 0.721 Within authorization band Pass NVNT 1-DH1 2480 Ant1 0.721 Within authorization band Pass Report No.:JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 6 of 44 NVNT 2-DH1 2402 Ant1 1.234 Within authorization band Pass NVNT 2-DH1 2441 Ant1 1.176 Within authorization band Pass NVNT 2-DH1 2480 Ant1 1.172 Within authorization band Pass NVNT 3-DH1 2402 Ant1 1.21 Within authorization band Pass NVNT 3-DH1 2441 Ant1 1.196 Within authorization band Pass NVNT 3-DH1 2480 Ant1 1.204 Within authorization band Pass -20dB Bandwidth NVNT 1-DH1 2402MHz Ant1 Report No.:JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 7 of 44 -20dB Bandwidth NVNT 1-DH1 2441MHz Ant1 -20dB Bandwidth NVNT 1-DH1 2480MHz Ant1 Report No.:JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 8 of 44 -20dB Bandwidth NVNT 2-DH1 2402MHz Ant1 -20dB Bandwidth NVNT 2-DH1 2441MHz Ant1 Report No.:JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 9 of 44 -20dB Bandwidth NVNT 2-DH1 2480MHz Ant1 -20dB Bandwidth NVNT 3-DH1 2402MHz Ant1 Report No.:JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 10 of 44 -20dB Bandwidth NVNT 3-DH1 2441MHz Ant1 -20dB Bandwidth NVNT 3-DH1 2480MHz Ant1 Carrier Frequencies Separation Condition Mode Antenna Hopping Freq1 (MHz) Hopping Freq2 (MHz) HFS (MHz) Limit (MHz) Verdict NVNT 1-DH1 Ant1 2401.974 2402.984 1.01 0.721 Pass NVNT 1-DH1 Ant1 2440.99 2442 1.01 0.721 Pass NVNT 1-DH1 Ant1 2478.996 2480.006 1.01 0.721 Pass Report No.:JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 11 of 44 NVNT 2-DH1 Ant1 2402.162 2403.148 0.986 0.823 Pass NVNT 2-DH1 Ant1 2441.148 2442.16 1.012 0.784 Pass NVNT 2-DH1 Ant1 2478.838 2479.834 0.996 0.781 Pass NVNT 3-DH1 Ant1 2402.148 2403.148 1 0.807 Pass NVNT 3-DH1 Ant1 2440.834 2441.834 1 0.797 Pass NVNT 3-DH1 Ant1 2478.834 2479.838 1.004 0.803 Pass CFS NVNT 1-DH1 2402MHz Ant1 Report No.:JYTSZB-R12-2100269 JianYan Testing G…

Text truncated - open the document above for the full version.

Test Setup Photos

Report No: JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 38 of 39 7 Test Setup Photo Radiated Spurious Emission Below 1GHz Above 1GHz Report No: JYTSZB-R12-2100269 JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZE2101099 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 39 of 39 Conducted Emission 8 EUT Constructional Details Reference to the test report No.: JYTSZB-R12-2100266. ------End of report------

Contact Information

Applicant

Jerry Liu

[email protected]+86-0755-61803856Fax: 755-33979211

Test Firm

JianYan Testing Group Shenzhen Co., Ltd.Bruce Zhang

[email protected]+86 (0) 755 23118282

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	2.40 GHz - 2.48 GHz	4.33 mW

Confidentiality

Long Term

Grant Notes

Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance.