2AIZN-XS01Portable Wireless Speaker

User Manual Portable Wireless Speaker Model: XS�� PACKAGE CONTENTS �×XS�� Portable Wireless Speaker �×USB-C Charging Cable �×User Manual POWER Press and hold �s: Power on Press and hold �s: Power off The blue light on for �s Press and hold: Previous track Short press: Volume- Press and hold: Next track Short press: Volume+ Short Press: Play/Pause The blue light blinks slowly MUSIC CONTROL PRODUCT OVERVIEW Volume-Play&Pause Power USB-C Charging Port Volume +Micro SD Reader Click the pairing name and connect with device Press � times: Reset Press � times: Clear pairing record The blue light on for �s BLUETOOTH ON CALLS The blue light blinks slowly Press � time: Answer call Press � time: Hang up call Press and hold �s: Reject call Press � times: SIRl / Google Assistant BATTERY Low battery: "Low battery" warning at ��% charge, it will warn again at �%; Speaker will power off when battery is at �% charge. Power �n: The blue light will flash for �s, before powering On. Power �ff: The blue light will flash for �s, before powering Off. Auto Power �ff: After �min of inactivity speaker will automatically power off. Charging: Indicator light will turn on solid red. Charging complete: About �-�.� Hours to full charge, red light will turn off. CAUTION： �. Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions. ‒ disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; ‒ leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; ‒ a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. �. EUT Temperature: �°C～+��°C(Standalone). Frequency Range(RF)： RF output power （only for CE）: BT：�.�� dBm BLE : �.�� dBm is in conformity with the essential requirements of the RE Directive ����/��/EU: Radio Article �.� EN ������ V�.�.� (����-��) ETSI EN ��� ���-� V�.�.� (����-��) ETSI EN ��� ���-� V�.�.� (����-��) EMC Article �.�(b) EN �����:����+A�:���� EN �����:����+A��:���� EN IEC �����-�-�:����+A��:���� EN �����-�-�:����+A�:���� EN ��� ���-� V�.�.�(����-��); Draft ETSI EN ��� ���-�� V�.�.� (����-��); Safety Article �.�(a) EN IEC �����-�:����+A��:���� Health Article �.�(a) EN �����:����&EN �����:���� An EU Type Examination Certificate for this Product was issued in accordance with Annex III (Module B) of the ����/��/EU Radio Equipment Directive by Bay Area Compliance Laboratories Corp. (����/��/EU Radio Equipment Directive Notified Body Identification Number ����) Signed on behalf of INFINIX MOBILITY LIMITED (Signature of authorized person) Signature: Certified Engineer Date: ����-��-�� EU Declaration of Conformity In accordance with EU Directives and Regulations Company name: INFINIX MOBILITY LIMITED Address: FLAT N ��/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE ��-�� SHAN MEI STREET FOTAN NT, Hong Kong as the manufacturer hereby declares under our sole responsibility that the, Product(s): Portable Wireless Speaker Model name: XS�� FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part �� of the FCC Rules. Operation is subject to the following two conditions: (�) This device may not cause harmful interference, and (�) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part �� of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. FCC ID: �AIZN-XS�� CONNECTIONS TF mode: short press power on/off button,it can be read when the TF card is inserted. FM Mode: short press power on/off button after power on, can be turn it to FM Mode. Search FM: long press the play/pause button USB-C Charging TF Card Switch FM channels: Long press “-”: previous channels long press“+”: next channels TWS FUNCTION Click the pairing name and connect with device Infinix XS�� Press and hold on either speakers, A short sound will be heard The two speakers are connected in TWS mode. Connect one of the speakers to your device. To cancel the TWS connection： press and hold on both speakers for � seconds Turn on both speakers Product name Infinix XS�� Bluetooth version �.� Speaker ��mm Battery capacity ����mAh Charging input �V/���mAh Talk or music About �� hours (��% volume) Charging time About � hours Operating range ��M Output Power �W Connection Type USB-C �V Hereby, INFINIX MOBILITY LIMITED. Declares that this Portable Wireless Speaker is in compliance with the essential requirements and other relevant provisions of directive ����/��/EU. Click the pairing name and connect with device Infinix XS�� (only support BDR,EDR,BLE 1M)…

Text truncated - open the document above for the full version.

INFINIX MOBILITY LIMITED Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT, Hong Kong Tel.: +86-0755-61803856 Fax:755-33979211 E-mail: [email protected] Date: 2023-04-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: The RF chip, model: AB5605C, which installed in our product Portable Wireless Speaker, Model: XS01, FCC ID: 2AIZN-XS01, supports BDR (GFSK), EDR (π/4-DQPSK, 8DPSK), BLE 1M and BLE 2M functions. For use in America and this chip will not support/enable BLE 2M. The BLE 2M has been shielded by the manufacturer using the software, the end user has no capability to activate it. Sincerely Yours, Signature Jerry Liu Certified Engineer

INFINIX MOBILITY LIMITED Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT, Hong Kong Tel.: +86-0755-61803856 Fax:755-33979211 E-mail: [email protected] CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 2023-04-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2AIZN-XS01 INFINIX MOBILITY LIMITED certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely Yours, Signature Jerry Liu Certified Engineer INFINIX MOBILITY LIMITED Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT, Hong Kong

INFINIX MOBILITY LIMITED Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT, Hong Kong Tel.: +86-0755-61803856 Fax:755-33979211 E-mail: [email protected] CFR 47 §2.911 (d)(5)(ii) Attestation Letter Attestation Letter Date: 2023-04-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2AIZN-XS01 INFINIX MOBILITY LIMITED certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely Yours, Signature Jerry Liu Certified Engineer INFINIX MOBILITY LIMITED Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT, Hong Kong

INFINIX MOBILITY LIMITED Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT, Hong Kong Tel.: +86-0755-61803856 Fax:755-33979211 E-mail: [email protected] QA-FR-170-B FCC Authorization Date: 2023-04-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, INFINIX MOBILITY LIMITED hereby authorizes Shenzhen Accurate Technology Co., Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature Jerry Liu Certified Engineer

INFINIX MOBILITY LIMITED Address: FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT, Hong Kong Tel.: +86-0755-61803856 Fax:755-33979211 E-mail: [email protected] FCC Confidential Authorization Date: 2023-04-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AIZN-XS01 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, INFINIX MOBILITY LIMITED hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description As well as short-term confidential treatment of information accompanying this application for a period of 180 days after grant is issued as outlined below: • Internal Photos • User’s Manual • External Photos • Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Jerry Liu Certified Engineer

Shenzhen Accurate Technology Co., Ltd. FCC ID: 2AIZN-XS01 External Photos Page 1 of 4 External Photos Shenzhen Accurate Technology Co., Ltd. FCC ID: 2AIZN-XS01 External Photos Page 2 of 4 Shenzhen Accurate Technology Co., Ltd. FCC ID: 2AIZN-XS01 External Photos Page 3 of 4 Shenzhen Accurate Technology Co., Ltd. FCC ID: 2AIZN-XS01 External Photos Page 4 of 4

Shenzhen Accurate Technology Co., Ltd. FCC ID: 2AIZN-XS01 Internal Photos Page 1 of 6 Internal photos Shenzhen Accurate Technology Co., Ltd. FCC ID: 2AIZN-XS01 Internal Photos Page 2 of 6 Shenzhen Accurate Technology Co., Ltd. FCC ID: 2AIZN-XS01 Internal Photos Page 3 of 6 Shenzhen Accurate Technology Co., Ltd. FCC ID: 2AIZN-XS01 Internal Photos Page 4 of 6 Shenzhen Accurate Technology Co., Ltd. FCC ID: 2AIZN-XS01 Internal Photos Page 5 of 6 RF Chip BT/BLE NAT Shenzhen Accurate Technology Co., Ltd. FCC ID: 2AIZN-XS01 Internal Photos Page 6 of 6 FM ANT

Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-16121E-RF-00B Version 8: 2023-01-30 Page 12 of 37 FCC- BLE FCC §15.247 (i), §1.1307 (b)(1)&§2.1093 – RF EXPOSURE Applicable Standard According to FCC §2.1093 and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D01 General RF Exposure Guidance The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where 1. f(GHz) is the RF channel transmit frequency in GHz. 2. Power and distance are rounded to the nearest mW and mm before calculation. 3. The result is rounded to one decimal place for comparison. 4. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test Exclusion. Measurement Result For worst case: Mode Frequency (MHz) Max tune-up conducted power (dBm) Max tune-up conducted power (mW) Distance (mm) Calculated value Threshold (1-g SAR) SAR Test Exclusion BLE 2402-2480 -3.0 0.50 5 0.2 3.0 Yes Result: No SAR test is required

www.taitien.com Page 1 RoHS Compliant APPROVAL SHEET Issued No. : DESCRIPTION : Chip series antenna 2.4 GHz Bandwidth 100MHz NOMINAL FREQ. : 2.4GHz TAITIEN P/N : 1201-ANT-00062 TAITIEN MODEL : DN02450M31101 REVISION : 01 DATE : 07/18/2019 Approved Checked Prepared Customer Signature Approved: Date: CUSTOMER : Taitien Electronics (Shenzhen) Co., Ltd. 8F., Block 7, Nanyou Tian’an Industrial Estate, Nanshan Dist., Shenzhen, Guangdong, China 518054 www.taitien.com Page 2 REVISION HISTORY Rev. Revised Page Revision Content Date Ref. No. Reviser 01 N/A Initial Released 07/18/2019N/A IrwinChen Please note that placing order with Taitien constitutes acknowledgement that you have read and agree to Taitien’s Terms and Conditions. Please refer to our website for more details. Thank you for choosing Taitien! Remedies and Limitation of Liability: BUYER’S SOLE AND EXCLUSIVE REMEDY AND TAITIEN’S SOLE LIABILITY, WITH RESPECT TO ANY BREACH OF WARRANTY, SHALL BE AT TAITIEN’S OPTION: (A) REPAIR OR REPLACEMENT OF THE DEFECTIVE OR NONCONFORMING PRODUCTS OR (B) REFUND OF BUYER’S PURCHASE PRICE FOR THE DEFECTIVE OR NONCONFORMING PRODUCTS. IN NO EVENT SHALL TAITIEN’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES ARISING OUT OF ANY CAUSE (INCLUDING, BUT NOT LIMITED TO, CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER TORT) EXCEED THE PURCHASE COST OF THE CRYSTALS. IN NO EVENT SHALL TAITIEN BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES. www.taitien.com Page 3 1.SCOPE :This specification applies to Chip series antenna 2.Rating: Operating Temperature : −25 °׋ ~ 125 °׋ Storage Temperature : 20 °׋ ~ 25 °׋ R.H. 65 (For Referance) 3.Marking: 4.Standard Testing Condition: Unless otherwise specified In case of doubt Humidity Ordinary Humidity(25 to 85% RH) 60 to 70 % RH Temperature Ordinary Temperature(15 to 35) 20±2 5.Configuration and Dimensions: Figure Dimensions(mm) L 3.2±0.2 W 1.6±0.2 D 0.5±0.2 T 0.5±0.2 TERMINAL CONFIGURATION www.taitien.com Page 4 6. Electrical Characteristics: Part No. Impedance Test Freq. Bandwidth*Peak Gain*VSWR Polarization (Ω) (GHz)(MHz)(dBi)(max) (Linear) 1201-ANT-00060 50 2.4 100 1~2 2 Linear 7.Dimensions and Recommended PC Board Pattern: www.taitien.com Page 5 8.Matching Circuit: www.taitien.com Page 6 9.antenna pattern pictuter 2440MHz

★ Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “ ”. Shenzhen Accurate Technology Co., Ltd. is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. 1/F., Building A, Changyuan New Material Port, Science & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R. China Tel: +86 755-26503290 Fax: +86 755-26503290 Web: www.atc-lab.com Version 8: 2023-01-30 Page 1 of 37 FCC- BLE TEST REPORT Applicant Name : INFINIX MOBILITY LIMITED Address : FLAT N 16/F BLOCK B UNIVERSAL INDUSTRIAL CENTRE 19-25 SHAN MEI STREET FOTAN NT, Hong Kong Report Number : RA230331-16121E-RF-00B FCC ID: 2AIZN-XS01 Test Standard (s) FCC PART 15.247 Sample Description Product Type: Portable Wireless Speaker Model No.: XS01 Multiple Model(s) No.: N/A Trade Mark: Infinix Date Received: 2023/03/31 Report Date: 2023/04/17 Test Result: Pass* * In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Andy Yu Candy Li EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: RA230331-16121E-RF-00B Version 8: 2023-01-30 Page 2 of 37 FCC- BLE TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 GENERAL INFORMATION ....................................................................................................................................... 5 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 5 OBJECTIVE ................................................................................................................................................................... 5 TEST METHODOLOGY .................................................................................................................................................. 5 MEASUREMENT UNCERTAINTY .................................................................................................................................... 6 SYSTEM TEST CONFIGURATION .......................................................................................................................... 7 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 7 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 7 EUT EXERCISE SOFTWARE .......................................................................................................................................... 7 DUTY CYCLE ................................................................................................................................................................ 8 SUMMARY OF TEST RESULTS ............................................................................................................................. 10 TEST EQUIPMENT LIST ......................................................................................................................................... 11 FCC §15.247 (I), §1.1307 (B)(1)&§2.1093 – RF EXPOSURE ...................................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 FCC §15.203 - ANTENNA REQUIREMENT ........................................................................................................... 13 APPLICABLE STANDARD ............................................................................................................................................ 13 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 13 FCC §15.207 (A) – AC LINE CONDUCTED EMISSIONS .................................................................................... 14 APPLICABLE STANDARD ............................................................................................................................................ 14 EUT SETUP ................................................................................................................................................................ 14 EMI TEST RECEIVER SETUP ....................................................................................................................................... 14 TEST PROCEDURE ...................................................................................................................................................... 14 TRANSD FACTOR & MARGIN CALCULATION.............................................................................................................. 15 TEST DATA ................................................................................................................................................................ 15 FCC §15.209, §15.205 & §15.247(D) - SPURIOUS EMISSIONS ............................................................................ 18 APPLICABLE STANDARD ...............................................................................................................................…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-16121E-RF Test Photos Page 1 of 2 Photo of Conducted Emission Measurement Shenzhen Accurate Technology Co., Ltd. Project No.: RA230331-16121E-RF Test Photos Page 2 of 2 Photo of Radiated Emission Measurement (Below 1G) Photo of Radiated Emission Measurement (Above 1G)