2AJ3WEBESHW11-BLED LAMP

LED LAMP EBE-SHW11-B Manufacture:ZHEJIANG EBOY TECHNOLOGY Co., Ltd. ITEM: PO WER: LUMINOUS FLUX: C OLOR TEMP: LIFE SP AN: BEAM ANGLE: DIMMABLE: DIMENSION: EBE-SHW11-B 17.15dBm(802.11b),17.49dBm(802.11g),17.94dBm(802.11n20), 18.07dBm(802.11n40) 700 115 132*96mm FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Co mpany: ZHEJIANG EBOY TECHNOLOGY CO., LTD. Add: No.568 Huabao Street, Deqing County, Huzhou City, 313200 China Tel: 0086-571-89000977 Fax: 0086-571-89009898 DECLARATION Dear Sir or Madam: We, ZHEJIANG EBOY TECHNOLOGY CO., LTD. hereby declare that produ ct name: LED LAMP (model name: EBE-SHW11-B, EBE-SHW11-F, C-BW905, C-BW405, C-BW305, C- B W205, BW905, BW405, BW305, BW205. FCC ID: 2AJ3WEBESHW11-B). EBE-SHW11-B and have been tested by BACL. The differences of them are as follows: Please contact me if there is need for any additional clarification or i nformation. Best Regards, Signature: Printed Name: Yang Xiao Fen Title: R&D MANAGER FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 1. Th e difference between EBE-SHW11-B and C-BW905, C-BW405, C-BW305, C-BW205, BW905, BW405, BW305, BW205 is only model name. The differences between EBE-SHW11-B and EBE-SHW11-F are model name and PCB layout. 2 . Model name:EBE-SHW11-B Series model:EBE-SHW11-F

F C C A u t h o rization Date: 2020-03-17 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, ZHEJIANG EBOY TECHNOLOGY CO., LTD., the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Company: ZHEJIANG EBOY TECHNOLOGY CO., LTD. Add: No.568 Huabao Street, Deqing County, Huzhou City, 313200 China Tel: 0086-571-89000977 Fax: 0086-571-89009898 Sincerely Yours, Signature: Typed or Printed Name: Yang Xiao Fen Title: R&D MANAGER This authorization is valid until further written notice from the applicant.

FCC Co nfidentia l Authori z ation Date: 2020-03-17 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AJ3WEBESHW11-B To: whom it may concern, In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, ZHEJIANG EBOY TECHNOLOGY CO., LTD. hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Typed or Printed Name: Yang Xiao Fen Title: R&D MANAGER Company: ZHEJIANG EBOY TECHNOLOGY CO., LTD. Add: No.568 Huabao Street, Deqing County, Huzhou City, 313200 China Tel: 0086-571-89000977 Fax: 0086-571-89009898 Email: [email protected]

EXHIBIT A - EUT EXTERNAL PHOTOGRAPHS

LAMP EBE-SHW11-B 2AJ3WEBESHW11-B

EXHIBIT B - EUT INTERNAL PHOTOGRAPHS WiFi Antenna Series Model: EBE-SHW11-F

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RSHB200317001-00B FCC Part 15.247 Page 14 of 71 FCC §1.1310 & §2.1091 –MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard Acco rding to subpart §2.1091 and subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3-1.346141.63*(100)30 1.34-30824/f2.19/f*(180/f²)30 30-30027.50.0730. 230 300-1500//f/150030 1500-100,000//1.030 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculated Formulary: Predication of MPE limit at a given distance S = PG/4πR² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Ca lculated Data: Mode Frequency Range (MHz) Antenna Gain Target Output Power Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) (dBi) (numeric)(dBm)(mW) 802.11b 2412~2462 2.00 1.58 17.5056.23 20 0.0177 1.0 802.11g 2.00 1.58 17.5056.23 20 0.0177 1.0 802.11 n-HT20 2.00 1.58 18.0063.10 20 0.0198 1.0 802.11 n-HT40 2422~2452 2.00 1.58 18.5070.79 20 0.0222 1.0 No te: The target output power was declared by the manufacturer. Conclusion: The device meets MPE at distance 20cm.

FCC PART 15.247 TEST REPORT For ZHEJIANG EBOY TECHNOLOGY CO., LTD. No.568 Huabao Street, Deqing County, Huzhou City, 313200 China FCC ID: 2AJ3WEBESHW11-B Report Type: Original Report Product Type: LED LAMP Test Engineer: Lee Li Re port Number: RSHB200317001-00B Re port Date: 2020-07-07 Reviewed B y: Oscar Ye EMC Mana ger Prepared By: Bay Area Compliance Laboratories Corp. (Kunshan) No.248 Chenghu Road, Kunshan, Jiangsu province, China Tel: +86-0512-86175000 Fax: +86-0512-88934268 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RSHB200317001-00B FCC Part 15.247 Page 2 of 71 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................. 10 EXTERNAL I/O CABLE ................................................................................................................................................ 10 BLOCK DIAGRAM OF TEST SETUP .............................................................................................................................. 10 SUMMARY OF TEST RESULTS ............................................................................................................................. 12 TEST EQUIPMENT LIST ......................................................................................................................................... 13 FCC §1.1310 & §2.1091 –MAXIMUM PERMISSIBLE EXPOSURE (MPE) ....................................................... 14 FCC §15.203 - ANTENNA REQUIREMENT ........................................................................................................... 15 APPLICABLE STANDARD ............................................................................................................................................ 15 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 15 FCC §15.207 (a) - AC LINE CONDUCTED EMISSIONS ...................................................................................... 16 APPLICABLE STANDARD ............................................................................................................................................ 16 EUT SETUP ................................................................................................................................................................ 16 EMI TEST RECEIVER SETUP ....................................................................................................................................... 16 TEST PROCEDURE ...................................................................................................................................................... 16 FACTOR & OVER LIMIT CALCULATION ...................................................................................................................... 17 TEST RESULTS SUMMARY .......................................................................................................................................... 17 TEST DATA ................................................................................................................................................................ 17 FCC §15.209, §15.205 & §15.247(d) - SPURIOUS EMISSIONS ............................................................................. 22 APPLICABLE STANDARD ............................................................................................................................................ 22 EUT SETUP ................................................................................................................................................................ 22 EMI TEST RECEIVER SETUP ....................................................................................................................................... 23 TEST PROCEDURE ...................................................................................................................................................... 23 CORRECTED AMPLITUDE & MARGIN CALCULATION ...............................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT C - TEST SETUP PHOTOGRAPHS Conducted Emissions (Front View) Conducted Emissions (Side View) Radiated Emissions (Below 1GHz) Radiated Emissions (Above 1GHz)