2AJ6BBHTV32M1DTactSuit Pro

Attestation Statement Letter I Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: __________________ Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC Application for FCC ID: _______________________________ ________________________ certifies that the equipment for which authorization is sought is not “covered” equipment prohibited for receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Applicant’s Signature: Applicant’s Name:

Attestation Statement Letter II Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: __________________ Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC Application for FCC ID: _______________________________ _________________________ certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Applicant’s Signature: Applicant’s Name:

FCC Attestation Statement US Agent For Service Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: _2024-11-20 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC Application for FCC ID: 2AJ6BBHTV32M1D bHaptics Inc. certifies that, as of the date of the filing of the application, Americas Compliance Consulting LLC dba iCertifi is our designated U.S. agent for service of process for the above reference FCC ID: 2AJ6BBHTG06D101. Americas Compliance Consulting LLC dba iCertifi agrees to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceedings involving the equipment. Americas Compliance Consulting LLC dba iCertifi accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for above referenced FCC ID. Designated U.S. Agent Information: Name: Americas Compliance Consulting LLC iCertifi Address: 2445 NE Division St, ste 202 Bend, OR 97703 Contact Person: Paul Preston Telephone: 866-885-4575 Email: [email protected] FRN : 0033399411 Sincerely, Applicant’s Signature: Agent’s Signature: Applicant’s Name: Kiuk Gwak Agent’s Name: Paul Preston

Date: 04/17/2018 VCB_F-01: Operating Procedures Form – FCC Authorization v02 Page 1 of 1 bHaptics Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-11-20 SUBJECT: FCC Application for (FCC ID: 2AJ6BBHTV32M1D) To Whom It May Conc ern: We, the undersigned, hereby authorize David Zhang in Vista Laboratories, Inc. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Vista Laboratories, Inc. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party t o the application is subject to a denial of federal benefit s pursuant to that section. Sincerely, (Must be signed by the person that is listed on the FCC Website) C lient’s signature: Client’s name & title: Kiuk Gwak/ CEO Contact information / address: 82-42-867-2468/ 201-B, 361-17, Gapcheon-ro, Yuseong-gu, Daejeon, Republic of Korea

Date: 04/17/2018 VCB_F-01: Operating Procedures Form – FCC Confidentiality v03 Page 1 of 1 bHaptics Inc. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AJ6BBHTV32M1D Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Type of Confidentiality Requested Exhibit Type ☐Short Term ☒Permanent Block Diagrams ☒Short Term External Photos ☒Short Term ☐Permanent* Internal Photos ☐Short Term ☒Permanent Operation Description ☐Short Term ☒Permanent Parts List/BOM ☐ Short Term ☒Permanent Schematics ☒Short Term Test Setup Photos ☒Short Term ☐Permanent* User manual *Requires further justification before permanent confidentiality will be allowed. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of 180 days. Sincerely, Client’s signature: Client’s name & title : Kiuk Gwak / CEO Contact information / address: 82-31-427-6034 / 82-42-867-2468/ 201-B, 361-17, Gapcheon-ro, Yuseong-gu, Daejeon, Republic of Korea

FCC ID: 2AJ6BBHTV32M1D SAMPLE LABEL & LOCATION bHaptics Inc. M/N: BHTV32M1D FCC ID: 2AJ6BBHTV32M1D 2Cm 3Cm

FCC ID: 2AJ6BBHTV32M1D Page 1 of 1 RF exposure According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 ㎒ to 6 ㎓ at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(㎓)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, Where; f(㎓) is the RF channel transmit frequency in ㎓ Power and distance are rounded to the nearest ㎽ and mm before calculation The result is rounded to one decimal place for comparison Results Mode Frequency (㎓) Distance (mm) Max Average tune-up power (㏈m) Calculation value Exclusion Threshold (㏈m) (㎽) LE 1 Mbps 2.402 ~ 2.480 5 -1.50 0.708 0.223 ≤3.0

AEC-Q200 Qualification Available 2.4GHz Chip Antenna, SMD Detail Specification: Page 1 of 5 ±± ±± ±± ±± ±± https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 1.1 2019 Johanson Technology, Inc. All Rights Reserved 18 months max. Frequency (GHz) 2.4 - 2.5 Reel Quantity (pcs/reel) 1000 Operating Temperature -40 to +85°C High Frequency Ceramic Solutions Part Number 6/9/2020 Let us help you with the antenna design, optimization, and tuning! 2450AT43B100 General Specifications P/N 2450AT43B100 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. e.g. 2450AT43B100(E or S)100% Tin Packing Style Evaluation Board 2450AT43B100-EB1SMA Bulk (loose) T&R Suffix = E or S Suffix = E P/N Suffix Mechanical Dimensions In L 0.2760.0087.000.2 W 0.0790.0082.000.2 L1 0.1022.600.20.008 W1 0.0200.0080.500.2 T 0.0792.00+0.1 / -0.2+0.004 / -0.008 a 0.0200.0120.500.3 Terminal Configuration Function FEED 1 FEED 2 GND No. 1 2 3 mm e.g. 2450AT43B100E e.g. 2450AT43B100SSuffix = S Part Number Explanation Return Loss (dB) 9.5 min. Peak Gain (dBi) 1.3 typ. Average Gain (dBi) -0.5 typ. Impedance (Ω) Input Power (W) Recommended Storage Conditions and Period for unused T&R Product +5 to +35°C Humidity 45 - 75% RH 50 2 max. (CW) Bottom Top View Side View L W L1W1 Bottom View a T     2.4GHz Chip Antenna, SMDP/N 2450AT43B100 Detail Specification: Page 2 of 5 https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 1.1 2019 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 6/9/2020 Mounting Considerations 1: Evaluation Board Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Would you like the layout file? Contact our engineers at: https://www.johansontechnology.com/ask-a-question 0.83 2.81 1.6 1.6 1 0.8 1.83 0.8 1 2 22 10 4.87 * 1.8nH 2.7nH ) ) 4.87 40 20 Ground No Ground 10 Antenna Units in mm *50ΩGCPW transmission line recommended Note 1: Pins 2, 3 & 4, although "NC", must be soldered to their corresponding PCB pads for proper electrical operation 2.4GHz Chip Antenna, SMDP/N 2450AT43B100 Detail Specification: Page 3 of 5 https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 1.1 2019 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 6/9/2020 Mounting Considerations 1: Electrical Performance @25°C Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Measured Return Loss Have antenna tuning issues? Please contact us if you have any questions regarding the implementation of this antenn a in your PCB's layout. We'll be happy to guide you to maximize the antenna's performance Contact our applications engineers at: https://www.johansontechnology.com/ask-a-question 2.4GHz Chip Antenna, SMDP/N 2450AT43B100 Detail Specification: Page 4 of 5 https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 1.1 2019 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 6/9/2020 Mounting Considerations 1: Antenna Performance Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Typical 2D radiation patterns @ 2.45GHz YZ‐plane XZ‐plane XY‐plane θ φ +Z (θ= 0°) θ +Z +Z +X -Z +Y (θ= 90°) -Y -Z +Z (θ= 0°) +X (θ= 90°) -X -Z -Z +Y -Y +X -X +Y -Y -X +X (φ= 0°) -X +Y (φ= 90°) -Y Vertical Horizontal Vertical Horizontal Vertical Horizontal 2.4GHz Chip Antenna, SMDP/N 2450AT43B100 Detail Specification: Page 5 of 5 https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 1.1 2019 Johanson Technology, Inc. All Rights Reserved Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com/antennas Soldering Information https://www.johansontechnology.com/ipcsoldering-profile MSL Info https://www.johansontechnology.com/msl-rating https://www.johansontechnology.com/rohs-compliance Packaging Information https://www.johansontechnology.com/tape-reel-packaging For layout review contact our applications team at: https://www.johansontechnology.com/ask-a-question RoHS Compliance "High Frequency Ceramic Solutions" Antenna tuning, optimization, and validation services: https://www.johansontechnology.com/ipc-antenna-services For more antennas and to download measured S-parameters, go to: 6/9/2020 Need help designing the antenna in? Use our antenna design services! https://www.johansontechnology.com/ipc-antenna-services We provide 2 free layout reviews and if you need us to tune and characterize the antenna on your product (inside anechoic chamber) we can do that too. Small lab fee may apply for the latter.

TEST REPORT Report No. : KES-RF240776 Page1/36 KES Co., Ltd. #3002, #3503, #3701, 40, Simin-daero365beon-gil, Dongan-gu, Anyang-si,Gyeonggi-do, 14057, Republic ofKorea Tel : +82-31-425-6200, Fax : +82-31-341-3838 KES-QP16-F01(00-23-01-01)KES Co., Ltd. The authenticity of this test report can be found on the verification page of our website (www.kes.co.kr). FCC & IC TEST REPORT 1. Client ○ Name :bHaptics Inc. ○ Address :201-B, 361-17, Gapcheon-ro, Yuseong-gu, Daejeon, South Korea 2. Sample Description ○ Product item : TactSuit Pro ○ Model name : BHTV32M1D ○ Manufacturer etc. : bHaptics Inc. 3. Date of test :2024.11.13 ~ 2024.11.15 4. Location of Test :Permanent Testing LabOn Site Testing ○ Adress : 473-21, Gayeo-ro, Yeoju-si, Gyeonggi-do, Korea 5. Test method used :Part 15 Subpart C 15.247, RSS-247 (Issue 3), RSS-Gen (Issue 5) 6. Test result :PASS The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This laboratory is not accredited for the test results marked *. This test report is not related to KOLAS accreditation. Affirmation Tested byTechnical Manager Name : Myeong-Ho, LEE(Signature) Name :Yeong-Jun Cho(Signature) 2024 . 11. 21. KES Co., Ltd. Accredited by KOLAS, Republic of KOREA Report No. :KES-RF240776 Page2/36 KES-QP16-F01(00-23-01-01)KES Co., Ltd. The authenticity of this test report can be found on the verification page of our website (www.kes.co.kr). REPORT REVISION HISTORY DateTest Report No.Revision History 2024.11.21KES-RF240776Initial This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. This document may be altered or revised by KES Co., Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by KES Co., Ltd. will constitute fraud and shall nullify the document. Use of uncertainty of measurement for decisions on conformity (decision rule): No decision rule is specified by the standard, when comparing the measurement result with the applicable limit according to the specification in that standard. The decisions on conformity are made without applying the measurement uncertainty(“simple acceptance” decision rule, previously known as “accuracy method”). ☐ Other (to be specified, for example when required by the standard or client) Report No. :KES-RF240776 Page3/36 KES-QP16-F01(00-23-01-01)KES Co., Ltd. The authenticity of this test report can be found on the verification page of our website (www.kes.co.kr). TABLE OF CONTENTS 1.General information ................................................................................................................................... 4 1.1.EUT description .......................................................................................................................... 4 1.2.Test configuration........................................................................................................................ 4 1.3.Information about derivative model ............................................................................................ 5 1.4.Accessory information ................................................................................................................ 5 1.5.Device modifications................................................................................................................... 5 1.6.Sample calculation ..................................................................................................................... 5 1.7.Measurement Uncertainty .......................................................................................................... 5 1.8.Frequency/channel operations ................................................................................................... 6 2.Summary of tests ....................................................................................................................................... 7 3.Test results ................................................................................................................................................. 8 3.1.99% Occupied Bandwidth .......................................................................................................... 8 3.2.6㏈bandwidth ........................................................................................................................ 10 3.3.Output power ............................................................................................................................ 12 3.4.Power spectral density ............................................................................................................. 14 3.5.Radiated restricted band and emissions .................................................................................. 16 3.6.Conducted spurious emissions & band edge ........................................................................... 30 3.7.AC conducted emissions .......................................................................................................... 33 3.8.Antenna Requirement............................................................................................................... 35 Appendix A. Measurement equipment.......................................................................................................... 36 Report No. :KES-RF240776 Page4/36 KES-QP16-F01(00-23-01-01)KES Co., Ltd. The authenticity of this test report can be found on the verification page of our website (www.kes.co.kr). 1.General information Applicant:bHaptics Inc. Applicant address: 201-B, 361-17, Gapcheon-ro, Yuseong-gu, Daejeon, South Korea Test site:KES Co., Ltd. Test site address:#3002, #3503, #3701, 40, Simin-daero365beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Republic of Korea 473-21, Gayeo-ro, Yeoju-si, Gyeonggi-do, Korea Test FacilityFCC Accreditation Designation No.: KR0100, Registration No.: 444148 ISED Registration No.: 23298 FCC rule…

Text truncated - open the document above for the full version.