2AJ8T-ACKWS10FDigital Photo Frame

User Manual Our digital frame is designed to collect & display thousands of your photos privately and safely. It’s easy to get connected with all your loved ones around the world. This manual will provide details you need to set up your frame, invite families and friends to share photos with your new frame. Let’s get started! Table of Contents Getting Started Uploading to frames Key Features Multiple Functions General Settings Technical Specification Trouble Shooting Customer care 1 2 12 15 15 18 18 20 User Manual 1. Plug in your frame Plug the socket in the back and connect the photo frame to a power source. The frame will power on in seconds. You can place the frame either in landscape or portrait mode (we recommend you place it in landscape mode during the first setup). 2. Initial Settings There are several initial settings (Language, Wi-Fi, Nickname, City, Timezone etc.) when you enter the system for the first time. 3. Connect to Wi-Fi You can connect to Wi-Fi during the initial settings or under the Wi-Fi setting. Select the Wi-Fi network you would like to connect to and enter the correct password if required. If your Wi-Fi network is not on the list, restart the router or move your frame closer to your router, wait for seconds and check it again. Note: ①The photo frame supports 2.4GHz Wi-Fi networks. ②A private Wi-Fi network is highly recommended. Upload Photos and Videos Via VPHOTO App Please download and install the VPhoto app on your mobile device by searching VPhoto on the App Store or Google Play Or scan the below QR 2. Create an Account Open the VPhoto app, please set your user name and your profile photo. 3. Pair Your Frame via the App You will be required to enter the connection code or scan the QR code of your frame. It’s in [Settings→ My Frame] on your frame. Once the process is completed, you will see a pop up message [Bind success]. Note: ① Connection Code is a 9-digit series number which can be found in your frame, device main interface→Settings→My frame. ② The Connection code and QR code will refresh every 12 hours. ③ Before you view the connection code and QR code, Please make sure your frame is connected to Wi-Fi, otherwise the connection code and QR code will not load out. 1.Download the VPhoto App 2 1 GETTING STARTED UPLOADING TO FRAMES 4 3 4. Upload Photos and Videos to Your Frame After connecting the App to your frame, you can start adding photos and videos to your frame anywhere and anytime as below two ways: ① Select the photos or videos of your Albums of your phone to upload and choose the frame to send. Click the Next Step, you can write caption for each photo and choose the frame you want to send. Click the right arrow icon to confirm. How to add caption for photos: Click on the photo and add description when uploading. Please attention, the title cannot be modified after uploading to the photo frame. ② Click Camera icon to take new photos or videos and choose the frame you would like to send to. Click the right arrow icon to confirm. The photo frame will receive the photos or videos in seconds, you can check the photo or video library on the frame. Note: ① If the frame didn’t receive the photos or videos, please reboot the product or check the Wi-Fi network. ② Each video clip is limited to 200MB. ③ Videos can only be uploaded individually everytime. UPLOADING TO FRAMES 5. Invite Your Families&Friends to Connect Your Frame Your families and friends can share their happy moments to your frame by following steps: ① Download and install the app. ② After opening App, please set user name and profile photo. ③ Get the connection code shared by you to connect to your frame, Please check your code is valid. ④ Start sending the photos and videos to your frame. Here are two ways to share you connection code: 1)Take a picture of the connection code on the frame to send. 2)Open your VPhoto App, click More icon on the upper left corner and choose Connected Device, select the frame you want your friend to connect, click the Share icon. You will receive a picture of QR code and Connection code. Send this to your families and friends. Note: ① Connection Code is a 9-digit series number which can be found in your frame, device main interface→Settings→My frame. ② The Connection code and QR code will refresh every 12 hours. ③ Before you view the connection code and QR code, Please make sure your frame is connected to Wi-Fi, otherwise the connection code and QR code will not load out. 56 UPLOADING TO FRAMES Upload Photos and Videos Via Email You and your friends can also send photos and videos to the frame via your Email. 1. Connect your Email address to the frame via two methods: ① By Pressing [+] in [Us er Management], then add mailboxes. You will receive an email to inform your binding request is completed and the way to send photos and videos to the frame. ② By emailing to the mailbox specified in [My Frame], with the subject: bd Connection Code (For Example bd1234576789). Note: The Connection Code is valid for 12 hours. If it is a newly bound user, the latest connection code is required. It has no affect on already bound users. After the connection is successful, you can directly send photos/videos, and do not need to bind the photo frame repeatedly. 8 7 UPLOADING TO FRAMES UPLO Upload Photos and Videos Via Computer If you would like to upload large files to the frame, you can use computer to connect to your frame via USB cable simply. You can transferring photos and videos from computer in large quantities. 1. Connect your computer and frame with the USB cable.Please keep the frame powered on. 2. Find your frame disk that named after the frame’s model number in your computer. 3. Add media files that you would like to play on your frame to exact sub-folder in your frame disk. (pictures into ‘Pictures’ folder, videos into ‘Movies’ folder, etc) 4. In your frame, the photos, videos and music you upload from your computer will be stored in ‘Internal Storage’ in the library. 10…

Text truncated - open the document above for the full version.

Shenzhen Joyhong Technology Co., Ltd The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 4/24/2023 To whom it may concern: We, Shenzhen Joyhong Technology Co., Ltd, hereby certify that the equipment for which authorization is sought (FCC ID: 2AJ8T-ACKWS10F) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). Sincerely, Signature Zk Huang engineer Shenzhen Joyhong Technology Co., Ltd 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V02

FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of Adapter FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Photo 3 Appearance of Adapter Photo 4 Appearance of EUT FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Photo 9 Appearance of EUT

FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Appendix IID Label Size for the label: 30mm X 30mm Appendix II ID Label Location Digital Photo Frame FCC ID: 2AJ8T-ACKWS10F Model: ACKWS10F This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 10 Internal of EUT Photo 11 Internal of EUT FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Photo 12 Internal of EUT Photo 13 Appearance of PCB Antenna FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Photo 14 Appearance of PCB Photo 15 Appearance of PCB FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Photo 16 Appearance of PCB Photo 17 Appearance of PCB FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Photo 18 Appearance of PCB Photo 19 Appearance of PCB

version01 Shenzhen Joyhong Technology Co., Ltd Declaration concerning Antenna Specification It is hereby declared that the product Model No.: ACKWS10F, JT070F-F02, JT070F-F05, JT070F-F03, JT080F-C02, JT080F-C01, JT080F-Q23, JT082F-V02, JT090F-C01, JT080F-C05, JT090F-C02, JT090F-C05, JT090F-A01, JT092F-T03 JT097F-C01, JT097F-C05, JT097F-C02, JT101F-A01, JT101F-A02, JT101F-A05, JT101F-B02, JT101F-B05, JT101F-C01, JT101F-C05, JT101F-C02, JT101F-D01, JT101F-T02, JT101F-T03, JT101F-U02, JT101F-E03, JT101F-F03, JT101F-F05, JT101F-F01, JT140F-X05, JT150F-E02, JT150F-E03 FCC ID: 2AJ8T-ACKWS10F fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for FPC antenna type(s) described below: Antenna No. Model No. of antenna: Type of antenna: Gain of the antenna (Max.) Frequency range: 2.4G WIFI / FPC Antenna 2.0dBi for 2400-2500MHz; The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Shenzhen Joyhong Technology Co., Ltd Address: 5th Floor, Building1, Zhongtai Road NO.18, Loucun Second Industrial Park, Xinhu Street, Guangming, Shenzhen, China Place: Zk Huang Date: 2023-4-18 Signature:

Debuggin gmodels c a t a l o g u e Sampleplacementlocation WIFIThroughput testdata Matchthe circuittest Passive testdata Motherboard conduction Dongguan Sinbolin Electronic Technology Co.,LTD MainAntennaGPSAntenna ElementValueElementValue E1(0402)E1(0402) E2(0402)E2(0402) E3(0402)E3(0402) E4(0402) WIFIAntennaAUXAntenna ElementValueElementValue E1(0402)E1(0402) E2(0402)E2(0402) E3(0402)E3(0402) WIFI CH TRP(MSC7)TIS(MSC7) 802.11n 1 14.8 -73 6 14.6 -72 13 14.6 -73 WIFICH OFDM TRP(54M) OFDM TIS(54M) 802.11g 115.3 -75 615.5 -75 1315.5 -74 WIFI CH CCK TRP(11M) CCK TIS(11M) 802.11b 1 16.2 -87 615.8 -88 1316.5 -87 WIFICH TRP(MSC7)TIS(MSC7) 802.11n 112.7 -68.3 6 12.3 -70.3 1312.2 -69.4 WIFICH OFDM TRP(54M) OFDM TIS(54M) 802.11g 113.1 -70.1 613.7 -69.7 13 12.9 -71.0 WIFI CH CCK TRP(11M) CCK TIS(11M) 802.11b 113.8 -80.7 6 14.0 -79.8 1313.4 -81.3 RadiationPatterns(2400-2500MHz) PassiveTestForWIFI2400 Freq (MHz) Effi (%) Gain (dBi) 2400 61.02 2.0 241062.05 1.73 242062.821.82 243061.53 1.4 244059.851.34 245058.28 1.73 2460 55.51 1.69 247053.63 1.52 248055.31.71 249057.16 1.93 250056.881.91 Uploaddata Downloaddata

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202303-0104-1 Page: 1 of 3 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Maximum Permissible Exposure Evaluation FCC ID: 2AJ8T-ACKWS10F 1. Client Information Applicant : Shenzhen Joyhong Technology Co., Ltd Address : 5th Floor, Building1, Zhongtai Road NO.18, Loucun Second Industrial Park, Xinhu Street, Guangming, Shenzhen, China Manufacturer : Shenzhen Joyhong Technology Co., Ltd Address : 5th Floor, Building1, Zhongtai Road NO.18, Loucun Second Industrial Park, Xinhu Street, Guangming, Shenzhen, China 2. General Description of EUT EUT Name : Digital Photo Frame Models No. : ACKWS10F, JT070F-F02, JT070F-F05, JT070F-F03, JT080F-C02, JT080F-C01, JT080F-Q23, JT082F-V02, JT090F-C01, JT080F-C05, JT090F-C02, JT090F-C05, JT090F-A01, JT092F-T03 JT097F-C01, JT097F-C05, JT097F-C02, JT101F-A01, JT101F-A02, JT101F-A05, JT101F-B02, JT101F-B05, JT101F-C01, JT101F-C05, JT101F-C02, JT101F-D01, JT101F-T02, JT101F-T03, JT101F-U02, JT101F-E03, JT101F-F03, JT101F-F05, JT101F-F01, JT140F-X05, JT150F-E02, JT150F-E03 Model Different : All PCB boards and circuit diagrams are the same, the only difference is that model names. Product Description : Operation Frequency: 802.11b/g/n(HT20): 2412MHz~2462MHz Antenna Gain: 2.0dBi FPC Antenna Power Rating : Adapter (XC012WH-0502000UC) Input: 100-240V~ 50/60Hz 0.5A Output: 5.0V2.0A, 10.0W Software Version : JH-A33-U-MIPI10.1-WIFI-V01 Hardware Version : JH-A33-U-MIP10.1-V01 Connecting I/O Port(S) : Please refer to the User's Manual Remark : the evaluation report used the EUT(RW-C-202303-0104-1-2#). Report No.: TBR-C-202303-0104-1 Page: 2 of 3 TB-RF-074-1.0 MPE Calculations for WIFI 1. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 2. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR 2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 3. Simultaneous transmission MPE Considerations According to KDB447498: All transmitters and antennas in the host must be either evaluated for MPE compliance, by measurement or computational modeling, or qualify for the standalone MPE test exclusion in section 7.1. Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modeled or measured field strengths or power density, is ≤ 1.0. This means that: ∑ of MPE ratios ≤ 1.0 Report No.: TBR-C-202303-0104-1 Page: 3 of 3 TB-RF-074-1.0 4. Test Result: Mode Conducted Power(max) (dBm) Turn-up Power (dB) Max tune up power (dBm) [P] ANT Gain (dBi) [G] Distance (cm) [R] Power Density (mW/ cm 2 ) [S] Limit of Power Density (mW/ cm 2 ) (S) 802.11b 6.962 7±1 8 2 20 0.0020 1 8.747 9±1 10 2 20 0.0032 1 8.411 8±1 9 2 20 0.0025 1 802.11g 14.243 14±1 15 2 20 0.0100 1 15.093 15±1 16 2 20 0.0126 1 14.600 15±1 16 2 20 0.0126 1 802.11n(HT20) 14.621 15±1 16 2 20 0.0126 1 14.709 15±1 16 2 20 0.0126 1 14.520 15±1 16 2 20 0.0126 1 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range (MHz) Power density (mW/ cm 2 ) 300-1,500 F/1500 1,500-100,000 1.0 For 2.4WIFI :2412~2462 MHz MPE limit S: 1mW/ cm 2 The worst MPE is calculated as 0.0126mW/ cm2 < limit 1mW / cm 2 . So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. 6. Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. -----END OF THE REPORT-----

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0104-2 Page: 1 of 51 FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 RF Test Data for 2.4G WiFi (Conducted Measurements) General Description of EUT Product Name: Digital Photo Frame Test Model: ACKWS10F Sample ID: RW-C-202303-0104-1-2# Environmental Conditions Temperature: 25°C Relative Humidity: 55% Test Voltage: AC 120V/60Hz Test Engineer: Liu Ji Ming Note: For a more detailed features description, please refer to the report TBR-C-202303-0104-2 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0104-2 Page: 2 of 51 FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Contents 1. Duty Cycle ........................................................................................................................................................................................... 3 2. Maximum Conducted Output Power ................................................................................................................................................. 9 3. -6dB Bandwidth ................................................................................................................................................................................ 10 4. Occupied Channel Bandwidth ......................................................................................................................................................... 16 5. Maximum Power Spectral Density Level ......................................................................................................................................... 22 6. Band Edge ........................................................................................................................................................................................ 28 7. Conducted RF Spurious Emission .................................................................................................................................................. 35 8. Restrict Band .................................................................................................................................................................................... 45 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0104-2 Page: 3 of 51 FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT b 2412 Ant1 100 0 0 NVNT b 2437 Ant1 100 0 0 NVNT b 2462 Ant1 100 0 0 NVNT g 2412 Ant1 100 0 0 NVNT g 2437 Ant1 100 0 0 NVNT g 2462 Ant1 100 0 0 NVNT n(HT20) 2412 Ant1 100 0 0 NVNT n(HT20) 2437 Ant1 100 0 0 NVNT n(HT20) 2462 Ant1 100 0 0 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0104-2 Page: 4 of 51 FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Test Graphs Duty Cycle NVNT b 2412MHz Ant1 Duty Cycle NVNT b 2437MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0104-2 Page: 5 of 51 FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Duty Cycle NVNT b 2462MHz Ant1 Duty Cycle NVNT g 2412MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0104-2 Page: 6 of 51 FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Duty Cycle NVNT g 2437MHz Ant1 Duty Cycle NVNT g 2462MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0104-2 Page: 7 of 51 FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Duty Cycle NVNT n(HT20) 2412MHz Ant1 Duty Cycle NVNT n(HT20) 2437MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0104-2 Page: 8 of 51 FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Duty Cycle NVNT n(HT20) 2462MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0104-2 Page: 9 of 51 FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT b 2412 Ant1 6.962 30 Pass NVNT b 2437 Ant1 8.747 30 Pass NVNT b 2462 Ant1 8.411 30 Pass NVNT g 2412 Ant1 14.243 30 Pass NVNT g 2437 Ant1 15.093 30 Pass NVNT g 2462 Ant1 14.600 30 Pass NVNT n(HT20) 2412 Ant1 14.621 30 Pass NVNT n(HT20) 2437 Ant1 14.709 30 Pass NVNT n(HT20) 2462 Ant1 14.520 30 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202303-0104-2 Page: 10 of 51 FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 3. -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT b 2412 Ant1 10.01 0.5 Pass NVNT b 2437 Ant1 9.58 0.5 Pass NVNT b 2462 Ant1 9.99 0.5 Pass NVNT g 2412 Ant1 16.06 0.5 Pass NVNT g 2437 Ant1 16.3 0.5 Pass NVNT g 2462 Ant1 16.35 0.5 Pass NVNT n(HT20) 2412 Ant1 16.32 0.5 Pass NVNT n(HT20) 2437 Ant1 17.09 0.5 Pass NVNT n(HT20) 2462 Ant1 16.58 0.5 Pass…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202303-0104-2 Page: 1 of 40 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2AJ8T-ACKWS10F Report No. : TBR-C-202303-0104-2 Applicant : Shenzhen Joyhong Technology Co., Ltd Equipment Under Test (EUT) EUT Name : Digital Photo Frame Model No. : ACKWS10F Series Model No. : Please refer to page 5 Brand Name : ---- Sample ID : RW-C-202303-0104-1-1# & RW-C-202303-0104-1-2# Receipt Date : 2023-03-15 Test Date : 2023-03-15 to 2023-04-15 Issue Date : 2023-04-18 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Witness Engineer : Wade. Lv Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202303-0104-2 Page: 2 of 40 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode .................................................................................................... 7 1.6 Description of Test Software Setting ................................................................................ 9 1.7 Measurement Uncertainty .................................................................................................. 9 1.8 Test Facility ......................................................................................................................... 10 2. TEST SUMMARY ..................................................................................................................... 11 3. TEST SOFTWARE ................................................................................................................... 11 4. TEST EQUIPMENT .................................................................................................................. 12 5. CONDUCTED EMISSION TEST ........................................................................................... 13 5.1 Test Standard and Limit .................................................................................................... 13 5.2 Test Setup ........................................................................................................................... 13 5.3 Test Procedure ................................................................................................................... 13 5.4 Deviation From Test Standard ......................................................................................... 14 5.5 EUT Operating Mode ........................................................................................................ 14 5.6 Test Data ............................................................................................................................. 14 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 15 6.1 Test Standard and Limit .................................................................................................... 15 6.2 Test Setup ........................................................................................................................... 17 6.3 Test Procedure ................................................................................................................... 18 6.4 Deviation From Test Standard ......................................................................................... 19 6.5 EUT Operating Mode ........................................................................................................ 19 6.6 Test Data ............................................................................................................................. 19 7. RESTRICTED BANDS REQUIREMENT ............................................................................. 20 7.1 Test Standard and Limit .................................................................................................... 20 7.2 Test Setup ........................................................................................................................... 20 7.3 Test Procedure ................................................................................................................... 21 7.4 Deviation From Test Standard ......................................................................................... 22 Report No.: TBR-C-202303-0104-2 Page: 3 of 40 TB-RF-074-1.0 7.5 EUT Operating Mode ........................................................................................................ 22 7.6 Test Data ............................................................................................................................. 22 8. BANDWIDTH TEST ................................................................................................................. 23 8.1 Test Standard and Limit ...…

Text truncated - open the document above for the full version.

FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID: 2AJ8T-ACKWS10F TB-RF-074-1.0 Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Conducted Emission -----END OF THE REPORT-----