2AJDZGL24AMobile feature phone 4G-LTE

FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha t interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maxi mum value. Before a new model phone is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, tests for each phone are performed in positions and locations as required by the FCC. For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 5 mm from the body. Non-compliance with the above restrictions may result in violation of RF exposure guidelines.

U.S. AGENT LETTER OF ATTESTATION Date: 2024-08-28 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2AJDZGL24A G-TOUCH LLC. certifies that, as of the date of the filing of the application, G-TOUCH LLC. is our designated U.S. agent for service of process for the above referenced FCC ID. G-TOUCH LLC. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. G-TOUCH LLC. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: G-TOUCH LLC. Address: 1750 NW 107TH Avenue, STE P-411 Miami Florida United States FRN: 0025785908 Tel.: 1+ 786 587 9108 Email: [email protected] Signed by (printed name): Enrique Gavidia Signature: Applicant: G-TOUCH LLC. Address: 1750 NW 107TH Avenue, STE P-411 Miami Florida United States FRN: 0025785908 Tel.:1+ 786 587 9108 Fax: 1+ 786 925 2423 E-mail: [email protected] Signed by (printed name): Enrique Gavidia Signature:

Applicant: G-TOUCH LLC. Address: 1750 NW 107TH Avenue, STE P-411 Miami Florida United States Tel.:1+ 786 587 9108 Fax: 1+ 786 925 2423 E-mail: [email protected] CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 2024-08-28 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID:2AJDZGL24A G-TOUCH LLC. certifies that the equipment for which authorization is sought, is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Enrique Gavidia Manager Signature:

CFR 47 §2.911 (d)(5)(ii) Attestation Letter Applicant: G-TOUCH LLC. Address: 1750 NW 107TH Avenue, STE P-411 Miami Florida United States Tel.:1+ 786 587 9108 Fax: 1+ 786 925 2423 E-mail: [email protected] Attestation Letter Date: 2024-08-27 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID:2AJDZGL24A G-TOUCH LLC. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Enrique Gavidia Manager Signature:

Applicant: G-TOUCH LLC. Address: 1750 NW 107TH Avenue, STE P-411 Miami Florida United States Tel.:1+ 786 587 9108 Fax: 1+ 786 925 2423 E-mail: [email protected] QA-FR-170-B FCC Authorization Date: 2024-08-28 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, G-TOUCH LLC. hereby authorize World Alliance Testing & Certification (Shenzhen) Co., Ltd to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by World Alliance Testing & Certification (Shenzhen) Co., Ltd on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Enrique Gavidia Manager

Applicant: G-TOUCH LLC. Address: 1750 NW 107TH Avenue, STE P-411 Miami Florida United States Tel.:1+ 786 587 9108 Fax: 1+ 786 925 2423 E-mail: [email protected] FCC Confidential Authorization Date: 2024-08-28 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AJDZGL24A In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, G-TOUCH LLC. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  Tune-Up &Bom The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Enrique Gavidia Manager

Report No.: 2405W56213E Page 1 of 6 EUT EXTERNAL PHOTOGRAPHS Report No.: 2405W56213E Page 2 of 6 Report No.: 2405W56213E Page 3 of 6 Report No.: 2405W56213E Page 4 of 6 Report No.: 2405W56213E Page 5 of 6 Report No.: 2405W56213E Page 6 of 6

Label location:

Report No.: 2405W56213E Page 1 of 6 EUT INTERNAL PHOTOGRAPHS GSM/LTE ANT Report No.: 2405W56213E Page 2 of 6 Report No.: 2405W56213E Page 3 of 6 BT ANT Report No.: 2405W56213E Page 4 of 6 Report No.: 2405W56213E Page 5 of 6 Report No.: 2405W56213E Page 6 of 6

Report No.: 2405W56213ED Report Template: TR-4-E-016/V1.1 Page 1 of 5 RF Exposure Evaluation Report Report No.: 2405W56213ED Applicant: G-TOUCH LLC. Address: 1750 NW 107TH Avenue, STE P-411 Miami Florida United States Product Name: Mobile feature phone 4G-LTE Product Model: Gravity Multiple Models: N/A Trade Mark: GTOUCH FCC ID: 2AJDZGL24A Standards: 47 CFR §1.1310 KDB 447498 D01 General RF Exposure Guidance v06 Test Date: 2024-08-27 Test Result: Complied Report Date: 2024-09-05 Reviewed by: Approved by: Frank Yin Project Engineer Jacob Kong Manager Prepared by: World Alliance Testing & Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: 2405W56213ED Report Template: TR-4-E-016/V1.1 Page 2 of 5 Announcement 1. This test report shall not be reproduced except in full, without the written approval of World Alliance Testing & Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. 5. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Version No. Issued Date Description 00 2024-09-05 Original Report No.: 2405W56213ED Report Template: TR-4-E-016/V1.1 Page 3 of 5 Contents 1 General Information ............................................................................................................................ 4 1.1 Client Information ...................................................................................................................... 4 1.2 Product Description of EUT ....................................................................................................... 4 1.3 Laboratory Location ................................................................................................................... 4 2 RF Exposure Evaluation ..................................................................................................................... 5 2.1 Standard .................................................................................................................................... 5 2.2 Result......................................................................................................................................... 5 Report No.: 2405W56213ED Report Template: TR-4-E-016/V1.1 Page 4 of 5 1 General Information 1.1 Client Information Applicant: G-TOUCH LLC. Address: 1750 NW 107TH Avenue, STE P-411 Miami Florida United States Manufacturer: G-TOUCH DEVICES LIMITED Address: Building 40 11C floor Wanghai RD, Rose Garden 2 Shekou Nanshan District Shenzhen City Guangdong China 1.2 Product Description of EUT The EUT is Mobile feature phone 4G-LTE that contains Classic Bluetooth, GSM/GPRS and LTE radios. Sample Serial Number 2PCZ-1, 2PCZ-2 (assigned by WATC) Sample Received Date 2024-08-01 Sample Status Good Condition Frequency Range BT: 2402MHz - 2480MHz GSM850: 824-849MHz(TX), 869-894MHz(RX) GSM1900: 1850-1910MHz(TX), 1930-1990MHz(RX) LTE Band 5: 824-849MHz(TX), 869-894MHz(RX) Maximum Conducted Output Power BT: -1.13dBm GSM850: 31.72dBm GSM1900: 24.58dBm LTE Band 5: 20.76dBm Modulation Technology GFSK, π/4 DQPSK, 8DPSK, GMSK, QPSK, 16QAM Antenna Gain # BT: 0.11dBi GSM 850: 0.21dBi PCS 1900: 0.66dBi LTE Band 5: 0.21dBi Spatial Streams SISO (1X, 1X) Power Supply DC 3.7V from battery or DC 5.0V from adapter Adapter Information Input: AC100-240V, 50/60Hz, 0.15A Output: DC 5.0V/500mA Modification Sample No Modification by the test lab 1.3 Laboratory Location World Alliance Testing & Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China Tel: +86-755-29691511, Email: [email protected] The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 463912, the FCC Designation No. : CN5040. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0160. Report No.: 2405W56213ED Report Template: TR-4-E-016/V1.1 Page 5 of 5 2 RF Exposure Evaluation 2.1 Standard According to §1.1310, radio frequency devices shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] • [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 2.2 Result Radio Frequency (MHz) Maximum Conducted Power including Tune-u…

Text truncated - open the document above for the full version.

SHENZHEN QIXINTONGDA TECHNOLOGY CO. LIMITED Antenna test data report Room 503, Building 211, Tairan Industrial Zone, Tairan 9th Road, Chegongmiao, Futian District, Shenzhen GSM: B2/B3/B5/B8 WCDMA: B1/B2/B5/B8 FDD:B1/B2/B3/B4/B5/B7/B8/B28A 1. Test Project 2. Test Equipment Agilent 5071B （S Parameter（RL/VSWR）Test Equipment） Test Project Equipment 1. S Parameter 1. Return Loss(RL) 2. VSWR Network Analyzer： Agilent 5071B 2. RF Test （2/3/4G） 1. power 2. level 3.TRP/TIS Comprehensive Test： SP9500/CMW500/8960 Test Environment： Anechoic Chamber SP9500 （5GTest Equipment） Agilent 8960 （2G/3GTest Equipment） CMW 500 （2G/3G/4GTest Equipment） 3.Test Environment Microwave Anechoic Chamber 4.Test Steps Passive VSWR/RL Test Steps: Active TRP/TIS Test Steps： 5.Antenna Gain Band Max Gain Band Max Gain GSM850 0.21 LTE-B1 0.67 GSM900 0.33 LTE-B2 0.71 DCS1800 0.61 LTE-B3 0.61 PCS1900 0.66 LTE-B4 0.54 WCDMA1 0.67 LTE-B5 0.21 WCDMA2 0.71 LTE-B7 0.39 WCDMA5 0.21 LTE-B8 0.33 WCDMA8 0.33 LTE-B28A 0.19 Bluetooth 0.11 6.3D Lobe Diagram GSM850 GSM900 DSC1800 PCS1900 W1 W2 W5 W8 FDD-B1 FDD-B2 FDD-B3 FDD-B4 FDD-B5 FDD-B7 FDD-B8 FDD-B20 FDD-B28A BT/2.4G 8.Introduction to Antenna Information Antenna type and frequency band MAIN ANTENNA( PIFA DIV ANTENNA( ):2G/3G/4G PIFA BT ANTENNA( ):2G/3G/4G PIFA): 2.4G/BT Antenna material FPC

Report No.: 2405W56213EB Report Template: TR-4-E-006/V1.1 Page 1 of 44 FCC Test Report Report No.: 2405W56213EB Applicant: G-TOUCH LLC. Address: 1750 NW 107TH Avenue, STE P-411 Miami Florida United States Product Name: Mobile feature phone 4G-LTE Product Model: Gravity Multiple Models: N/A Trade Mark: GTOUCH FCC ID: 2AJDZGL24A Standards: FCC CFR Title 47 Part 15C (§15.247) Test Date: 2024-08-06 to 2024-08-11 Test Result: Complied Report Date: 2024-08-23 Reviewed by: Approved by: Frank Yin Project Engineer Jacob Kong Manager Prepared by: World Alliance Testing & Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: 2405W56213EB Report Template: TR-4-E-006/V1.1 Page 2 of 44 Announcement 1. This test report shall not be reproduced except in full, without the written approval of World Alliance Testing & Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. 5. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Version No. Issued Date Description 00 2024-08-23 Original Report No.: 2405W56213EB Report Template: TR-4-E-006/V1.1 Page 3 of 44 Contents 1 General Information ............................................................................................................................ 4 1.1 Client Information ...................................................................................................................... 4 1.2 Product Description of EUT ....................................................................................................... 4 1.3 Antenna information .................................................................................................................. 4 1.4 Related Submittal(s)/Grant(s) .................................................................................................... 5 1.5 Measurement Uncertainty ......................................................................................................... 5 1.6 Laboratory Location ................................................................................................................... 5 1.7 Test Methodology ...................................................................................................................... 5 2 Description of Measurement .............................................................................................................. 6 2.1 Test Configuration ...................................................................................................................... 6 2.2 Test Auxiliary Equipment ........................................................................................................... 6 2.3 Test Setup .................................................................................................................................. 7 2.4 Test Procedure .......................................................................................................................... 9 2.5 Measurement Method.............................................................................................................. 10 2.6 Measurement Equipment ........................................................................................................ 10 3 Test Results ....................................................................................................................................... 12 3.1 Test Summary .......................................................................................................................... 12 3.2 Limit ......................................................................................................................................... 13 3.3 AC Line Conducted Emissions Test Data ................................................................................ 14 3.4 Radiated emission Test Data ................................................................................................... 16 3.5 RF Conducted Test Data ......................................................................................................... 25 3.5.1 20 dB Emission Bandwidth .......................................................................................... 25 3.5.2 99% Occupied Bandwidth ............................................................................................ 25 3.5.3 Maximum Conducted Peak Output Power ................................................................... 26 3.5.4 Channel separation ...................................................................................................... 27 3.5.5 Number of hopping Frequency .................................................................................... 27 3.5.6 Time of occupancy (dwell time) .................................................................................... 28 3.5.7 100 kHz Bandwidth of Frequency Band Edge ............................................................. 29 4 Test Setup Photo ............................................................................................................................... 43 5 E.U.T Photo ........................................................................................................................................ 44 Report No.: 2405W56213EB Report Template: TR-4-E-006/V1.1 Page 4 of 44…

Text truncated - open the document above for the full version.

Report No.: 2405W56213EB Page 1 of 3 TEST SETUP PHOTOGRAPHS AC Line Conducted Emission Report No.: 2405W56213EB Page 2 of 3 Radiated Emission Below 30MHz 30MHz~1GHz Report No.: 2405W56213EB Page 3 of 3 1 GHz~18GHz Above 18GHz