2AJIV-MF1700Creative Pebble V3

L L R R AUX-in * Bluetooth USB Audio x1 Volume Knob d 2.25” Full-range Drivers a High Gain Mode: Pulsing Blue Flashing Blue Bluetooth Paired / Connected Bluetooth Pairing Mode Pulsing Green Flashing Green Bluetooth Paired / Connected Low Gain Mode: Bluetooth Pairing Mode Bluetooth ® / Source Button b i) Bluetooth Pairing Mode / LED Indicators: 2s Select “Pebble V3” from the list of discovered Bluetooth devices on your mobile device to pair. Upon successful pairing, LED will pulse in blue. Passive Radiators e High Gain / Low Gain Switch g AUX-in Port f LED Indicator c USB Audio Mode: Solid Blue Solid Green High Gain Low Gain AUX-in Mode: Solid CyanDetected / Connected Note: High Gain / Low Gain Switch is located under the right speaker. Refer to g illustration Note: When plugged into a PC / Mac for the first time, Creative Pebble V3 will be in USB Audio Mode by default. When plugged into a power source that does not support USB Audio for the first time, Creative Pebble V3 will be in Bluetooth Pairing Mode by default Disclaimer: If Pebble V3’s volume remains low when both device and speakers are at maxed volume while connected to a laptop’s USB port, connect the speakers to a 10W USB port instead to achieve optimum volume level * When AUX-in cable is detected / connected Quick Start Guide快速入门指南快速入門指南使用产品前请阅读使用说明Model No. / 型號 / 型号: MF1700 藍牙音箱/蓝牙音箱产品认证标准：GB8898, GB9254-1998 & GB17625.1 1. Overview PN: 03MF170000000 Rev A MINIMALISTIC 2.0 USB-C SPEAKERS WITH BLUETOOTH ® 5.0 支持蓝牙5.0的简洁2.0 USB-C音箱支援藍牙5.0的簡潔2.0 USB-C喇叭 FRONT VIEW REAR VIEW 5. Other Information Please visit creative.com/compliance/pebblev3 for the user guide, safety and regulatory information. Please visit creative.com/support/pebblev3 for all other support related to your product. Note: Compliance markings are located at the bottom of the product Once Master Reset is complete, previously paired Bluetooth devices will be removed. Creative Pebble V3 will then return to its original default state. 8s • Speaker Power: 2 x 4W RMS • Total System Power: Up to 8W RMS, Peak Power 16W • Drivers: 2.25” Full-range Drivers with Built-in Passive Radiators • Wireless Technology: Bluetooth 5.0 • Bluetooth Profiles: A2DP (Wireless stereo Bluetooth) • Wireless Type: Bluetooth Classic • Operating RF range: 2402–2480 MHz • Max. RF Output Power: < 4 dBm • Input: 5V 2A • Signal-to-Noise Ratio: 75 dB • Frequency Response: 100–17,000 Hz • Connectivity: USB Audio, Bluetooth, 3.5 mm Analog Stereo-in • Operating Temperature: 0–45°C * AUX-in cable not included USB-C to A Converter (if required) 2. Setting Up Creative Pebble V3 4. Technical Specification 3. Master Reset Flashing Blue / Green i) USB Audio Modeiii) AUX-in Mode * ii) Bluetooth Mode USB Pebble V3 Note: Up to 8W RMS when Gain is set to “High” while plugged into a 10W USB-C Port / USB-C Power Adapter / 5V 2A USB-A Power Adapter * * Adapter not included Vol + / MaxOff / Vol – ii) Toggling Between Sources: © 2020 Creative Technology Ltd. All rights reserved. Creative and the Creative logo are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. The Bluetooth ® word mark and logo are owned by the Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. Actual product may differ slightly from images shown. Use of this product is subject to a limited warranty. 【EN】 For details on the Creative Warranty period of your product, please visit https://www.creative.com/warranty 【FR】 Pour plus de détails sur la période de garantie Creative de votre produit, veuillez consulter https://www.creative.com/warranty 【DE】 Details zur Dauer der Creative-Garantie auf Ihr Produkt finden Sie unter https://www.creative.com/warranty 【ES】 Para obtener más información sobre el periodo de garantía de Creative referente a su producto, visite https://www.creative.com/warranty 【IT】 Per dettagli sul periodo di garanzia Creative del prodotto, visitare https:// www.creative.com/warranty 【NL】 Ga naar https://www.creative.com/warranty voor bijzonderheden over de garantieperiode op uw Creative-product 【PT】 Para obter mais detalhes acerca do Período de garantia da Creative para o seu produto, visite o site https://www.creative.com/warranty 【DA】 For detaljer om Creative-garantiperioden for dit produkt, besøg venligst https://www.creative.com/warranty 【SV】 För detaljerad information om garantiperioden för din Creative-produkt, gå till https://www.creative.com/warranty 【NO】 For detaljer om Creative-garantiperioden for produktet ditt, vennligst besøk https://www.creative.com/warranty 【FI】 Lisätietoja tuotteesi Creative-takuujaksosta on osoitteessa https://www. creative.com/warranty 【PL】 Szczegóły dotyczące okresu gwarancji Creative dla Twojego produktu można znaleźć na stronie https://www.creative.com/warranty 【SK】 Podrobné informácie o lehote záruky od spoločnosti Creative na váš výrobok nájdete na adrese https://www.creative.com/warranty 【CZ】 Podrobné informace o záručním období vašeho produktu od společnosti Creative najdete na adrese https://www.creative.com/warranty 【RU】 Для получения дополнительной информации о гарантийном сроке Creative для вашего продукта перейдите по ссылке https://www. creative.com/warranty Имя и адрес представителя ТС:ООО “Прокси”, 142281, Московская область, город Протвино, Оболенское шоссе, д.2, к.216., Номер телефона: +7 (495) 369-00-84 Электронный адрес: [email protected] Данная контактнаяинформация только для соответствующих органов таможенного союза (Россия, Белоруссия и Казахстан) по вопросам соответствия продукции Для информации о продукте илигарантии, пожалуйста, посмотрите гарантийный талон из комплекта поставки ата производства (месяц и год): Указана на упаковке. Данное устройство отвечает требованиям Технического регламента Таможенного союза ТР ТС 020/…

Text truncated - open the document above for the full version.

CREATIVE LABS PTE. LTD. Agent Authorization Company: CREATIVE LABS PTE. LTD. Address: 31 International Business Park, #03-01, Singapore, 609921 Product Name: Creative Pebble V3 Model Number(s): MF1700 Product Description: Creative Pebble V3 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jul. 28, 2020 Name: Toh Mary Title: REGULATORY MANAGER Company: CREATIVE LABS PTE. LTD.

CREATIVE LABS PTE. LTD. Date: 03 JULY, 2020 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 RE: CREATIVE LABS PTE. LTD. FCC ID: 2AJIV-MF1700 FCC Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. CREATIVE LABS PTE. LTD. requests that the following documents regarding this submission for FCC ID : 2AJIV-MF1700 be kept Long-Term confidential: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operational Description Operational Description.pdf Part list BOM.pdf Tune-Up-Procedure Tune up procedure.pdf And below exhibit kept short-term confidential (180 days): Exhibit Type File Name External Photos External Photo.pdf Internal Photos Internal Photo.pdf Test Setup Photos Test Setup Photos.pdf Users Manuals Users Manual.pdf Those documents contain detailed system and equipment description and related information about the product which CREATIVE LABS PTE. LTD. considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, CREATIVE LABS PTE. LTD. considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Thank you for your attention to this matter. Yours Sincerely, Print name: TOH MARY Title: REGULATORY MANAGER CREATIVE LABS PTE. LTD.

CREATIVE LABS PTE. LTD. Date: 03, JULY 2020 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The CREATIVE LABS PTE. LTD., the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen BALUN Technology Co., Ltd., to act on the behalf of the CREATIVE LABS PTE. LTD. solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AJIV-MF1700 including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of the CREATIVE LABS PTE. LTD. The CREATIVE LABS PTE. LTD. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely, Print name: TOH MARY Title: REGULATORY MANAGER CREATIVE LABS PTE. LTD.

Annex No.: BL-SZ2060285-AW 1 / 4 EUT EXTERNAL PHOTOS FRONT VIEW OF EUT REAR VIEW OF EUT Annex No.: BL-SZ2060285-AW 2 / 4 LEFT SIDE VIEW OF EUT RIGHT SIDE OF EUT Annex No.: BL-SZ2060285-AW 3 / 4 TOP VIEW OF EUT BOTTOM VIEW OF EUT Annex No.: BL-SZ2060285-AW 4 / 4 Accessory-USB Connector

Note: * Artwork’s Molding and Printing Tolerance : +/- 0.30 mm PROJECT NAME: MINIONS X5 MODEL NO.: MF1700 PART NAME: LEFT SPEAKER -Rear Cab (Bottom) : Artwork-Silk Screen Printing (丝印) REVISIONS REV DESCRIPTIONDATE First released for Tool launch31/03/2001 Remove NCC , CMIIT ,CCC and BSMI and add Z571(R-NZ Only) Remove NCC , CMIIT ,CCC and BSMI and add Z571(R-NZ Only) 06/07/2002 210-143249 R R-R-C2T-MF1700 IC:20469-MF1700 Z571(R-NZ Only) CAN ICES-3(B)NMB-3(B) FCC ID:2AJIV-MF1700 INPUT/输入/輸入 : 5V 2A MODEL NO. /型号/型號: MF1700 产品名称/ 品名：蓝牙音箱/藍牙音箱 原产地/原產地: 中国/中國 MADE IN CHINA 生产者/生產者: CREATIVE LABS PTE. LTD. 210-143249 R R-R-C2T-MF1700 IC:20469-MF1700 Z571(R-NZ Only) CAN ICES-3(B)NMB-3(B) FCC ID:2AJIV-MF1700 INPUT/输入/輸入 : 5V 2A MODEL NO. /型号/型號: MF1700 产品名称/ 品名：蓝牙音箱/藍牙音箱 原产地/原產地: 中国/中國 MADE IN CHINA 生产者/生產者: CREATIVE LABS PTE. LTD. 210-143249 R R-R-C2T-MF1700 IC:20469-MF1700 Z571(R-NZ Only) CAN ICES-3(B)NMB-3(B) FCC ID:2AJIV-MF1700 INPUT/输入/輸入 : 5V 2A MODEL NO. /型号/型號: MF1700 产品名称/ 品名：蓝牙音箱/藍牙音箱 原产地/原產地: 中国/中國 MADE IN CHINA 生产者/生產者: CREATIVE LABS PTE. LTD. REV 02 REV 02 38.4 mm 44.2 mm Aligned to center Aligned to center 5.2mm Silk Screen Printing (丝印) - Glossy Transparent

Report No.: BL-SZ2060285-601 2 / 74 Revision History Version Issue Date Revisions Content Rev. 01 Jul. 27, 2020 Initial Issue TABLE OF CONTENTS 1 ADMINISTRATIVE DATA (GENERAL INFORMATION) .......................................................................... 5 1.1 Identification of the Testing Laboratory ....................................................................................... 5 1.2 Identification of the Responsible Testing Location ...................................................................... 5 1.3 Laboratory Condition ................................................................................................................... 5 1.4 Announce .................................................................................................................................... 6 2 PRODUCT INFORMATION ...................................................................................................................... 7 2.1 Applicant Information ................................................................................................................... 7 2.2 Manufacturer Information ............................................................................................................ 7 2.3 Factory Information ..................................................................................................................... 7 2.4 General Description for Equipment under Test (EUT) ................................................................ 7 2.5 Technical Information .................................................................................................................. 8 2.6 Additional Instructions ................................................................................................................. 9 3 SUMMARY OF TEST RESULTS ............................................................................................................ 10 3.1 Test Standards .......................................................................................................................... 10 3.2 Verdict ....................................................................................................................................... 11 4 GENERAL TEST CONFIGURATIONS ................................................................................................... 12 4.1 Test Environments .................................................................................................................... 12 4.2 Test Equipment List ................................................................................................................... 12 4.3 Measurement Uncertainty ......................................................................................................... 13 4.4 Description of Test Setup .......................................................................................................... 14 4.4.1 For Antenna Port Test ............................................................................................................... 14 4.4.2 For AC Power Supply Port Test ................................................................................................ 14 4.4.3 For Radiated Test (Below 30 MHz) ........................................................................................... 15 4.4.4 For Radiated Test (30 MHz-1 GHz) .......................................................................................... 15 4.4.5 For Radiated Test (Above 1 GHz) ............................................................................................. 16 4.5 Measurement Results Explanation Example ............................................................................. 17 4.5.1 For conducted test items: .......................................................................................................... 17 Report No.: BL-SZ2060285-601 3 / 74 5 TEST ITEMS ........................................................................................................................................... 18 5.1 Antenna Requirements .............................................................................................................. 18 5.1.1 Relevant Standards ................................................................................................................... 18 5.1.2 Antenna Anti-Replacement Construction .................................................................................. 18 5.1.3 Antenna Gain ............................................................................................................................ 18 5.2 Frequency Hopping Systems .................................................................................................... 19 5.2.1 Relevant Standards ................................................................................................................... 19 5.2.2 Description of the systems ........................................................................................................ 19 5.3 Number of Hopping Frequencies .............................................................................................. 21 5.3.1 Limit ........................................................................................................................................... 21 5.3.2 Test Setup ................................................................................................................................. 21 5.3.3 Test Procedure .......................................................................................................................... 21 5.3.4 Test Result ................................................................................................................................ 21 5.4 Peak Output Power and E.I.R.P ................................................................................................ 22 5.4.1 Test Limit ....................................................................…

Text truncated - open the document above for the full version.

Annex No.: BL-SZ2060285-AR 1 / 5 TEST SETUP PHOTOS 1 Radiated Test Photo Below 30MHz Close-up Annex No.: BL-SZ2060285-AR 2 / 5 30MHz-1GHz Close-up Annex No.: BL-SZ2060285-AR 3 / 5 Above 1GHz Close-up Annex No.: BL-SZ2060285-AR 4 / 5 2 Conducted Test Photo Conducted Test-BT3.0 3 Conducted Emissions Test Photo 1 Annex No.: BL-SZ2060285-AR 5 / 5 Test Photo 2