
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
USER GUIDE 蓝牙音频发射器 Model No. / 型號 / 型号: SA0160 BT-W3 Bluetooth ® 5.0 Audio Transmitter PN: 03SA016000000 REV A © 2020 Creative Technology Ltd. All rights reserved. Creative and the Creative logo are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. Qualcomm ® aptX™ is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries. The Bluetooth ® word mark and logo are owned by the Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. Actual product may differ slightly from images shown. Use of this product is subject to a limited warranty. 【EN】 Hereby, Creative Labs Pte. Ltd. declares the Bluetooth Audio Transmitter, model no. SA0160 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at http://www.creative.com/EUDoC 【FR】 Par la présente, Creative Labs Pte. Ltd. déclare l’émetteur audio Bluetooth, modèle no. SA0160 conforme à la directive 2014/53 / UE. Le texte complet de déclaration de conformité Européenne est disponible sur http:// www.creative.com/EUDoC 【DE】 Hiermit hat Creative Labs Pte. Ltd. erklärt den Bluetooth Audio Transmitter, Modell-Nr. SA0160 entspricht der Richtlinie 2014/53 / EU. Der vollständige Text der EU-Konformitätserklärung ist unter http://www.creative. com/EUDoC verfügbar 【ES】 Por el presente documento, Creative Labs Pte. Ltd. declara que el transmisor de audio Bluetooth, modelo nº SA0160 cumple con la Directiva 2014/53/UE. El texto completo de la declaración de conformidad de la UE está disponible en http://www.creative.com/EUDoC 【IT】 Con la presente, Creative Labs Pte. Ltd. dichiara che il trasmettitore audio Bluetooth, modello n. SA0160 è conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE è disponibile su http://www. creative.com/EUDoC 【PL】 Niniejszym Creative Labs Pte. Ltd. deklaruje, że nadajnik audio Bluetooth, nr modelu SA0160 jest zgodny z dyrektywą 2014/53 / UE. Pełny tekst deklaracji zgodności UE jest dostępny na stronie http://www.creative.com/EUDoC 【NL】 Hierbij verklaart Creative Labs Pte. Ltd. dat de Bluetooth-audiozender, modelnr. SA0160 voldoet aan Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring is beschikbaar op http://www.creative.com/EUDoC 【PT】 Através do presente documento, a Creative Labs Pte. Ltd. Declara que o Transmissor de áudio Bluetooth, modelo n.º SA0160 está em conformidade com a Diretiva 2014/53/UE. O texto completo da Declaração de conformidade da UE está disponível em http://www.creative.com/EUDoC 【SV】 Bluetooth Transmitter, modell nr SA0160 är i överensstämmelse med EU-direktiv 2014/53/EU. Fullständig text till denna EU-försäkran om överensstämmelse finns tillgänglig på http://www.creative.com/EUDoC. 【NO】 Herved erklærer Creative Labs Pte. at Bluetooth audio-sender, modellnr. SA0160 er i samsvar med direktiv 2014/53/EU. Hele teksten om EUs samsvarserklæringen er tilgjengelig på http://www.creative.com/EUDoC 【DA】 Creative Labs Pte. Ltd. erklærer hermed, at Bluetooth Audio Transmitter, model nr. SA0160 er i overensstemmelse med direktiv 2014/53/EU. EU- overensstemmelseserklæringens fulde tekst er tilgængelig på http://www. creative.com/EUDoC 【FI】 Täten Creative Labs Pte. Ltd. ilmoittaa, että Bluetooth -äänilähetin, mallinumero SA0160, on direktiivin 2014/53/EU mukainen. Koko vaatimustenmukaisuustodistuksen teksti on saatavilla osoitteessa http://www. creative.com/EUDoC 【HU】 A Creative Labs Pte. Ltd. ezennel kijelenti, hogy az SA0160 típusú Bluetooth Audio Adapter megfelel a 2014/53/EU irányelv elõírásainak. Az EU Megfelelõségi nyilatkozat teljes szövege elérhetõ a http://www.creative.com/ EUDoC weboldalon 【EL】 Με το παρόν, η Creative Labs Pte. Ltd. δηλώνει ότι ο πομπός ήχου Bluetooth Audio Transmitter, με αρ. μοντέλου SA0160 συμμορφώνεται με την Οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ διατίθεται στη διεύθυνση http://www.creative.com/EUDoC 【LT】 „Creative Labs Pte. Ltd.“ pareiškia, kad „Bluetooth“ garso siustuvas, modelio nr. SA0160, atitinka Direktyva 2014/53/ES. Visas ES atitikties deklaracijos tekstas pasiekiamas adresu http://www.creative.com/EUDoC 【SK】 Creative Labs Pte. Ltd. týmto vyhlasuje, že Bluetooth zvukový vysielač, model č. SA0160 je v súlade so smernicou 2014/53/EÚ. Úplné znenie vyhlásenia o zhode EÚ je k dispozícii na lokalite http://www.creative.com/EUDoC 【CZ】 Společnost Creative Labs Pte. Ltd. tímto prohlašuje, že výrobek Bluetooth Audio Transmitter, model č. SA0160 vyhovuje směrnici 2014/53/EU. Úplné znění prohlášení o shodě EU je k dispozici na stránce http://www.creative.com/EUDoC CARACTÉRISTIQUES TECHNIQUES Fréquence de fonctionnement: 2402–2480 MHz Technologie sans fil: Bluetooth 5.0 Profils Bluetooth: - A2DP (Bluetooth stéréo sans fil) - AVRCP (contrôle Bluetooth à distance^) - HFP (profil mains libres) Codecs audio * : SBC, aptX, aptX Low Latency, aptX HD Portée de fonctionnement: Jusqu'à 30m (ligne de vue dégagée) Température de fonctionnement: 0–45°C Max. Puissance de sortie RF: 8 dBm Entrée: 5 V 100 mA ^Contrôlé depuis le récepteur connecté *Les récepteurs doivent être en mesure de prendre en charge les codecs mentionnés pour les utiliser ENREGISTREMENT DU PRODUIT L’enregistrement de votre produit vous garantit de profiter d’un service et d’une assistance produit appropriés. Vous pouvez enregistrer votre produit à l’adresse www.creative.com/register. Veuillez noter que vos droits de recours à la garantie ne dépendent en aucun cas de l’enregistrement. INFORMATIONS COMPLÉMENTAIRES Veuillez consulter le…
Text truncated - open the document above for the full version.
Creative Labs Pte. Ltd. Date: 2020-05-12 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AJIV-SA0160 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Creative Labs Pte. Ltd. This authorization is valid until further written notice from the applicant. Print Name: Toh Mary Title: Regulatory Manager Signature: On behalf of Company: Creative Labs Pte. Ltd. Telephone: +6568954196 E-mail: [email protected]
Creative Labs Pte. Ltd. Date: 2020-05-12 To: Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: Creative Labs Pte. Ltd. Regarding: Confidentiality Request regarding application for FCC ID: 2AJIV-SA0160 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date whichever is less. If the device is marketed within confidential period, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Print Name: Toh Mary Title: Regulatory Manager Signature: On behalf of Company: Creative Labs Pte. Ltd. Telephone: +6568954196 E-mail: [email protected]
Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Creative Labs Pte. Ltd. Address 31 International Business Park #03-01 Creative Resource Singapore 609921 Singapore Grantee Code 2AJIV FCC ID 2AJIV-SA0160 Authorized Contact Name Toh Mary Contact Email [email protected] Contact Phone +6568954196 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2020-5-12 Print Name: Toh Mary Title: Regulatory Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 7 External Photos for SZEM2005003360CR FCC ID: 2AJIV-SA0160 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 7 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 7 of 7
MODEL NO. : SA0160 FCC ID : 2AJIV-SA0160 IC: 20469-SA0160 XXX-XXXXXX MODEL NO. : SA0160 FCC ID : 2AJIV-SA0160 IC: 20469-SA0160 XXX-XXXXXX 1:1200%
Manufacturer / 生产者: CREATIVE LABS PTE. LTD. 31 International Business Park #03-01 Singapore 609921 creative.com 発売元: クリエイティブメディア株式会社 〒101-0021 東京都千代田区外神田4-7-7 ソフト99ビル4F jp.creative.com(日本語) Europe Office: CREATIVE LABS (EUROPE) LTD. Unit Q2, North Ring Business Park Santry, Dublin, D09 EV70. Ireland US Office: CREATIVE LABS, INC. 1901 McCarthy Boulevard, Milpitas, CA 95035 Model No. SA0160 PN: 06SA016000001 Rev A © 2020 Creative Technology Ltd. All rights reserved. Creative and the Creative logo are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. Qualcomm ® aptX™ is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries. The Bluetooth ® word mark and logo are owned by the Bluetooth SIG, Inc. and any use of such marks by Creative is under license. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. Actual product may differ slightly from images shown. Use of this product is subject to a limited warranty. FR Guide de démarrage rapide inclus DE Schnellstartanleitung enthalten ES Guía de inicio incluido IT Guida di avvio rapido disponibile online NL Snelstartgids online beschikbaar SV Snabbguide för start tillgänglig online DK Introduktionsvejledning tilgængelig online NO Hurtigstartveiledning tilgjengelig på nettet FI Pikaopas saatavilla verkossa PL Transmiter Audio Bluetooth 5.0 Creative BT-W3. Skrócona instrukcja obsługi została dołączona CZ Bezdrátová sluchátka Creative BT-W3. Příručka se stručným návodem je součástí balení. SK Bezdrôtové slúchadlá Creative BT-W3. Príručka so stručným návodom je súčasťou balenia. RU Гарнитура Creative BT-W3. Руководство пользователя в комплекте. JP クイックスタート ガイドが含まれています Дата изготовления/生产日期 PACKAGE CONTENTS / LIEFERUMFANG / パッケージ内容 BT-W3 BT-W3 Bluetooth ® 5.0 Audio Transmitter FG P/N 70SA016000000 型番: HP-BTW3 Bluetooth ® 5.0 Audio-Transmitter ブルートゥース® 5.0 オーディオ トランスミッター aptX™ Low Latency aptX™ HD For more information, visit creative.com/BTW3 USB-A - Voice Chat is available via HFP Mode and Analog Mic - Der Voice Chat ist über den HFP Modus und das analoge Mikrofon verfügbar - ボイスチャットはHFPまたはアナログマイクでの み利用できます。コーデックはボタンで切り替え 可能です aptX™ SBC WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Explanatory Note: To meet the requirements of Proposition 65, it is our responsibility to notify consumers in the State of California that they can be exposed to chemicals that are known to cause cancer and/or reproductive toxicity. It does not mean that the product is in violation of any product-safety standards or requirements. HFP Mode x1x2 5.0VOICE CHAT SUPPORT CODEC SELECTION aptX ™ LOW LATENCY 1.3. 2.4. Supported Receiver Codecs: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. 商品名称:音效卡产地:中国网址:cn.creative.com R-R-C2T-SA0160 Creative BT-W3 SA0160 Creative Labs Pte. Ltd. Creative BT-W3 USB-C to USB-A Adapter Analog Mic Manual
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 Internal Photos for SZEM2005003360CR FCC ID: 2AJIV-SA0160 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details ANT SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200500336003 Page: 1 of 6 Keny Xu EMC Laboratory Manager 1 Cover page SAR Evaluation Report Application No.: SZEM2005003360CR Applicant: CREATIVE LABS PTE. LTD. Address of Applicant: 31 International Business Park, #03-01 Creative Resource, Singapore 609921 Manufacturer: CREATIVE LABS PTE. LTD. Address of Manufacturer: 31 International Business Park, #03-01 Creative Resource, Singapore 609921 Equipment Under Test (EUT): EUT Name: Creative BT-W3 Model No.: SA0160 Trade Mark: CREATIVE FCC ID: 2AJIV-SA0160 Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-05-06 Date of Test: 2020-05-13 to 2020-05-14 Date of Issue: 2020-05-22 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200500336003 Page: 2 of 6 2 Version Revision Record Version Chapter Date Modifier Remark 01 2020-05-22 Original Authorized for issue by: Vincent Chen /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200500336003 Page: 3 of 6 3 Contents Page 1 COVER PAGE ........................................................................................................................................ 1 2 VERSION ................................................................................................................................................ 2 3 CONTENTS ............................................................................................................................................ 3 4 GENERAL INFORMATION ..................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 4 4.2 TEST LOCATION ................................................................................................................................ 5 4.3 TEST FACILITY .................................................................................................................................. 5 4.4 DEVIATION FROM STANDARDS ............................................................................................................ 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 5 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER .......................................................................... 5 5 SAR EVALUATION ................................................................................................................................. 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ........................................................................................ 6 5.1.1 Standard Requirement ................................................................................................................ 6 5.1.2 Limits .......................................................................................................................................... 6 5.1.3 EUT RF Exposure ....................................................................................................................... 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200500336003 Page: 4 of 6 4 General Information 4.1 General Description of EUT Power Supply: DC 5V, 100mA from USB port Cable: 2PCS USB-C to USB-A converter 1PCS microphone Bluetooth Version: V5.0 Classic Operation Frequency: 2402MHz to 2480MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Modulation Type: GFSK, π/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Antenna Type: Chip Antenna Antenna Gain: 3.1dBi SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200500336003 Page: 5 of 6 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C. 4.4 Deviation from Standards None. 4.5 Abnormalities from Standard Conditions None. 4.6 Other Information Requested by the Customer None. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200500336003 Page: 6 of 6 5 SAR Evaluation 5.1 RF Exposure Compliance Requirement 5.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considera…
Text truncated - open the document above for the full version.
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200500336002 Page: 1 of 85 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2005003360CR Applicant: CREATIVE LABS PTE. LTD. Address of Applicant: 31 International Business Park, #03-01 Creative Resource, Singapore 609921 Manufacturer: CREATIVE LABS PTE. LTD. Address of Manufacturer: 31 International Business Park, #03-01 Creative Resource, Singapore 609921 Equipment Under Test (EUT): EUT Name: Creative BT-W3 Model No.: SA0160 Trade Mark: CREATIVE FCC ID: 2AJIV-SA0160 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2020-05-06 Date of Test: 2020-05-13 to 2020-05-14 Date of Issue: 2020-05-22 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200500336002 Page: 2 of 85 Revision Record Version Chapter Date Modifier Remark 01 2020-05-22 Original Authorized for issue by: Vincent Chen /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200500336002 Page: 3 of 85 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200500336002 Page: 4 of 85 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 6 4.1 DETAILS OF E.U.T. ......................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 6 4.4 TEST LOCATION ............................................................................................................................. 7 4.5 TEST FACILITY ............................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 7 5 EQUIPMENT LIST ............................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................14 6.1 ANTENNA REQUIREMENT ................................................................................................................14 6.1.1 Test Requirement: ..................................................................................................................14 6.1.2 Conclusion ..............................................................................................................................14 6.2 OTHER REQUIREMENTS FREQUENCY HOPPING SPREAD SPECTRUM SYSTEM HOPPING SEQUENCE ........15 6.2.1 Test Requirement: ..................................................................................................................15 6.2.2 Conclusion ..............................................................................................................................15 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................16 7.1 CONDUCTED EMISSIONS AT AC POW ER LINE (150KHZ-30MHZ) ...................................................…
Text truncated - open the document above for the full version.
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM2005003360CR FCC ID: 2AJIV-SA0160 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs 1.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup 1.2 Radiated Emissions which fall in the restricted bands Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 1.3 Radiated Spurious Emissions Test Setup
No.1 Workshop, M-10, Middle Section, · Shenzhen · China
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 2.24 mW |
Creative XF1
Equipment Class
DTS - Digital Transmission SystemCreative Zen Hybrid Gen 2
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Creative BT-W6
Equipment Class
DSS - Part 15 Spread Spectrum TransmitterCreative Zen Air SXFI
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Creative Zen Air Pro
Equipment Class
DTS - Digital Transmission System