2AJMW-BTSP110Wireless LED Speaker

E-1 IMPORTANT SAFETY INSTRUCTIONS •Read these instructions carefully. •Keep these instructions in a safe place and follow all instructions. •Do not use this product near water. •Cleaning: Do not use liquid cleaners or aerosol cleaners. Clean only with a dry damp cloth. •Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including amplifiers) that produce heat. •Only use attachments/accessories specified by the manufacturer. •Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as objects have fallen into the product, does not operate normally, or has been dropped. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC Warning This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Canadian ICES-003 and RSS-247 Thank you for your purchase. ISEDC Radiation Exposure Statement: This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC exposition aux radiations: Cet équipement est conforme avec ISEDC les limites d'exposition aux rayonnements définies pour un contrôlé environnement. Cet émetteur ne doit pas être co-localisés ou fonctionner en conjonction avec une autre antenne ou émetteur. E-2 LOCATION OF CONTROLS 1.ON / OFF Switch6.MicroSD Input 2.Micro USB Charging Port7.Next Button / Volume Increase Button 3.Aux-in Port8.Play / Pause Button 4.Charge Indicator Light9.Previous Button / Volume decrease Button 5.USB Input10.Mode Button E-3 CHARGING THE SPEAKER Using the Charging Cable, plug the Micro USB Tip into the Micro USB Charging Port and plug the other end (USB Tip) into a USB port on your computer or USB wall charger (not included). The LED Indicator Light will illuminate red while charging and turn off when completed. A full charge will take approximately 3-4 hours. Product and Battery Disposal This product contains a built-in lithium battery and should not be disposed of in normal household waste. The battery in this device is not intended to be removed by the individual or end user. For disposal and recycling, please contact your local waste management authorities. The recycling and processing of electronic waste will make a significant contribution towards helping protect the environment. Warning: To reduce the risk of fire and burns, do not disassemble, crush, puncture, short external contacts or dispose of in fire or water. POWER ON/OFF To turn on/off the speaker, slide the toggle switch to the ON or OFF position. BLUETOOTH MODE Pairing a Bluetooth Enabled Device for the First Time to your Bluetooth Speaker NOTE: Refer to the user manual for your Bluetooth enabled device for instructions on pairing and connecting Bluetooth devices. 1.Keep the unit and your Bluetooth enabled device within 1 metre at all times during the pairing process. 2.Turn on the speaker and press the Mode Button and toggle to the Bluetooth mode. 3.Turn on the Bluetooth function on your Bluetooth enabled device and search for Bluetooth devices. When the search is complete, select “BTSPK110” from the Bluetooth device list. NOTE: •If pairing was unsuccessful, turn off the speaker first and repeat the steps above to re-pair again. •After successful pairing, paired devices will remember each other. Unless pairing information is deleted, re-pairing is not required after the first time. •If you want to pair the unit with other Bluetooth enabled devices, please disconnect/remove the exist…

Text truncated - open the document above for the full version.

Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada Tel:1-438-738-5163 Fax:1-514-858-1588 Email: [email protected] Date: 2023-04-16 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Edco Electronics Inc., hereby authorize China Certification ICT Co., Ltd (Dongguan). to act as a laboratory for testing and test report generation for the following project(s): (Product description: Wireless LED Speaker, model name: BTSPK110, FCC ID:2AJMW-BTSP110 The chip AB5638E support BT & BLE(1M/2M), But for this device,BLE 1M,2M were disabled by software, others are actived. Si ncerely, Signature: Pr inted name: Jonathan Lee Title:Director of Product Development

Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada Tel:1-438-738-5163 Fax:1-514-858-1588 Email: [email protected] CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Attestation Letter Date: 2023-04-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID:2AJMW-BTSP110 Edco Electronics Inc.(“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Edco Electronics Inc. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Contact Person: Jonathan Lee Title:Director of Product Development Edco Electronics Inc.& 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada

CFR 47 §2.911(d)(7) U.S Agent U.S. AGENT LETTER OF ATTESTATION Date: 2023-04-16 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AJMW-BTSP110 Edco Electronics Inc.(“the Applicant”) certifies that, as of the date of the filing of the application, Molo Import Export LLC(U.S. agent). is our designated U.S. agent for service of process for the above referenced FCC ID. Edco Electronics Inc.(“ the Applicant”) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Molo Import Export LLC(U.S. agent) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Molo Import Export LLC Address: 2334 Crystal Mile CT, Toms River, NJ, 08755, USA FRN:0033490996 Tel.: 514 825 9781 Email: [email protected] Signed by (printed name): Samuel Weiss Signature: Applicant: Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada Tel:1-438-738-5163 Email: [email protected] Signed by (printed name): Jonathan Lee Signature:

QA-FR-170-B Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada Tel:1-438-738-5163 Fax:1-514-858-1588 Email: [email protected] FCC Authorization Date: 2023-04-16 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Edco Electronics Inc., Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Jonathan Lee Title:Director of Product Development

QA-FR- 171-A Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada Tel:1-438-738-5163 Fax:1-514-858-1588 Email: [email protected] FCC Confidential Authorization Date: 2023-04-16 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:2AJMW-BTSP110 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (Edco Electronics Inc.) hereby requests long-term confidential treatment of information accompanying this application as outlined below: •Block Diagram •Schematics •Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed name: Jonathan Lee Title:Director of Product Development

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

BTSPK110 INPUT: DC 5V, 2A MAX FCC ID: 2AJMW-BTSP110 IC: 20174-BTSP110 MADE IN PRC 230215 Make logo and silkscreen in Pantone Cool Grey 6C 30 mm 20 mm

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Bluetooth Antenna FM Antenna

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230315246-00B Page 67 of 68 5. RF EXPOSURE EVALUATION 5.1 SAR test exclusion 5.1.1 Applicable Standard According to§15.247(i) and §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 5.1.2 Calculated Result The max conducted power including tune-up tolerance is 1.0 dBm (1.26 mW). [(max. power of channel, mW)/(min. test separation distance, mm)][√f(GHz)] =1.26/5*(√2.480) = 0.4< 3.0 Result: The SAR test exclusion is Compliant.

Product specification Quick Reference Date Antenna module on the system board Frequency 2.44GHz Ant. Port Input Pwr. (dBm) 0 (Typ. BT class 2 output power) Tot. Rad. Pwr. (dBm) -2.3 (Input pwr – loss pwr) Peak EIRP (dBm) 1.3 Directivity (dBi) 1 (all di rection antenna) Efficiency (dB) -2.3 (58.5%) Gain (dBi) 1.7 (Peak Gain XY-plane) Maximum Power (dBm) 1.3 (XY-plane) Minimum Power (dBm) -4(XY-plane) Avg. Power (dBm) -0.5(XY-plane) Max/Min Ratio (dB) 5.3(XY-plane) Max/Avg Ratio (dB ) 1.8(XY-plane) Min/Avg Ratio (dB) -3.5(XY-plane) Average Gain (d B) -0.5 (Avg Gain XY-plane) All the technical data and information contained herein are subject to change without prior notice Antenna Layout & module on the system board An tenna Gain Gain Table Unit i n dBi @2.44GHz XY-plane XZ-plane YZ-plane Eff iciency Peak Avg. Peak Av g. Peak Avg. Mo dule Board 1.3 -0.5 1.7 -3.8 1.1 -3.0 58.5% Return Loss The Environment of Antenna Radiation Pattern 3D radiation pattern diagram XY-plane XZ-plane YZ-plane

TEST REPORT Applicant: Edco Electronics Inc. Address: 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada FCC ID: 2AJMW-BTSP110 IC: 20174-BTSP110 HVIN: BTSPK110 Product Name: Wireless LED Speaker Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 2, February 2017 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230315246-00B Date Of Issue: 2023/4/14 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230315246-00B Page 2 of 68 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230315246-00B Page 3 of 68 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 7 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 2. SUMMARY OF TEST RESULTS .......................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 3.1.1 Applicable Standard ..................................................................................................................................... 11 3.1.2 EUT Setup.................................................................................................................................................... 12 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 13 3.1.4 Test Procedure ............................................................................................................................................. 13 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 13 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 14 3.2.1 Applicable Standard ..................................................................................................................................... 14 3.2.2 EUT Setup.................................................................................................................................................... 14 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 15 3.2.4 Test Procedure ............................................................................................................................................. 15 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 16 3.3 20 DB BANDWIDTH ........................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View