2AJMW-BTSP111Wireless LED Speaker

E-1 IMPORTANT SAFETY INSTRUCTIONS Read these instructions carefully. Keepthese instructions in a safe place and follow all instructions. Donot use this product near water. Cleaning: Do not use liquid cleaners or aerosol cleaners. Clean only with a dry damp cloth. Donot place near anyheat sources such as radiators, heat registers, stoves, or other apparatuses (including amplifiers) that produce heat. Only use attachments/accessories specified by the manufacturer. Refer a ll servicingto qualifi edservice personnel. Servicingis required whenthe product has been damaged in any way, such as objects have fallen into the product, does not operate normally, or has been dropped. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) thisdevice must accept any interference receiv ed, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection againstharmful interference in a residential installation. Thisequipmentgenerates, uses and can radiate radio frequency energyand, ifnot installedand used in accordan ce with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If thisequipmentdoes causeharmful interference to radio or television reception, which can be determined by turning theequipment offandon, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorien t or relocate the receivingantenna. - Increase the separation between the equipment and receiver. - Connect the equipment into anoutlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician forhelp. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate theequipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC Warning This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) thisdevicem aynotcauseinterference, and(2 ) thisdevicemustacceptanyinterference,includinginterference thatmaycause undesired operation of the device. UnderIndustryCanadaregulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain app roved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain shouldbesochosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. ISEDC Radiation Exposure Statement: This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC exposition aux radiations: Cet équipement est conforme avec ISEDC les limites d'exposition aux rayonnements définies pour un contrôlé environnement. Cet émetteur ne doit pas être co-localisés ou fonctionner en conjonction avec une autre antenne ou émetteur. This device complies with Canadian ICES-003 and RSS-247 Thank you for your purchase. E-2 LOCATION OF CONTROLS 1. Micro USB Charging Port 6. Play / Pause Button 2. Charge Indicator Light 7. Previous Button / Volume Decrease Button 3. USB Input 8. Next Button / Volume Increase Button 4. MicroSD Input 9. Mode Button 5. ON/OFF Switch E-3 CHARGING THE SPEAKER Using the Charging Cable provided, plug the Micro USB Tip into the Micro USB Charging Port and plug the other end (USB Tip) into a USB port on your computer or USB wall charger (not included). The LED Indicator Light will illuminate red while charging and turn off when completed. A full charge will take approximately 3-4 hours. NOTE: The input for charging is 5V, 1A. Do not use a charger with more than 5V, 2.4A rating. Product and Battery Disposal This product contains a built -in lithium battery and should not be disposed of in normal household waste. The battery in this device is not intended to be removed by the individual or end user. For disposal and recycling, please contact your local waste management authorities. The recycling and processing of electronic waste will make a significant contribution towards helping protect the environment. Warning: To reduce the risk of fire and burns, do not disassemble, crush, puncture, short external contacts or di spose of in fire or water. POWER ON/OFF To turn on/off the speaker, slide the toggle switch to the ON or OFF position. BLUETOOTH MODE Pair ing a Bluetooth Enabled Device for the First Time to your Bluetooth Speaker NOTE: Refer to the user manual for your Bluetooth enabled device for instructions on pairing and connecting Bluetooth devices. 1. Keep the unit and your Bluetooth enabled device within 1 metre at all times during the pairing process. 2. Turn on the speaker and press the Mode Button and toggle to the Bluetooth mode. 3. Turn on the Bluetooth function on your Bluetooth enabled device and search for Bluetooth devices. When the search is complete, select “BTSPK111” from the Bluetooth device list. NOTE: If pairing was unsuccessful, turn off the speaker first and repeat the steps above to re-pair ag ain. After successful pairing, paired devices will remember each other. Unless pairing information is deleted, re-pairing is not required after the first time. If you want to pair the unit with other Blue…

Text truncated - open the document above for the full version.

Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada Tel:1-438-738-5163 Fax:1-514-858-1588 Email: [email protected] Date: 2023-04-16 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Edco Electronics Inc., hereby authorize China Certification ICT Co., Ltd (Dongguan). to act as a laboratory for testing and test report generation for the following project(s): (Product description:Wireless LED Speaker, model name:BTSPK111, FCC ID:2AJMW-BTSP111) The chip AC6969D support BT & BLE(1M/2M), But for this device,BLE 1M,2M and 8DPSK were disabled by software, others are actived. Sincerely, Sig nature: Pr inted name: Jonathan Lee Title:Director of Product Development

Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada Tel:1-438-738-5163 Fax:1-514-858-1588 Email: [email protected] CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Attestation Letter Date: 2023-04-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID:2AJMW-BTSP111 E dco Electronics Inc.(“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Edco Electronics Inc. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Contact Person: Jonathan Lee Title:Director of Product Development Edco Electronics Inc.& 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada

CFR 47 §2.911(d)(7) U.S Agent U.S. AGENT LETTER OF ATTESTATION Date: 2023-04-16 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID:2AJMW-BTSP111 Edco Electronics Inc.(“the Applicant”) certifies that, as of the date of the filing of the application, Molo Import Export LLC(U.S. agent). is our designated U.S. agent for service of process for the above referenced FCC ID. Edco Electronics Inc.(“ the Applicant”) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Molo Import Export LLC(U.S. agent) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Molo Import Export LLC Address: 2334 Crystal Mile CT, Toms River, NJ, 08755, USA FRN:0033490996 Tel.: 514 825 9781 Email: [email protected] Signed by (printed name): Samuel Weiss Signature: Applicant: Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada Tel:1-438-738-5163 Email: [email protected] Signed by (printed name): Jonathan Lee Signature:

QA-FR-170-B Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada Tel:1-438-738-5163 Fax:1-514-858-1588 Email: [email protected] FCC Authorization Date: 2023-04-16 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Edco Electronics Inc., Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Jonathan Lee Title:Director of Product Development

QA-FR- 171-A Edco Electronics Inc. Add: 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada Tel:1-438-738-5163 Fax:1-514-858-1588 Email: [email protected] FCC Confidential Authorization Date: 2023-04-16 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:2AJMW-BTSP111 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (Edco Electronics Inc.) hereby requests long-term confidential treatment of information accompanying this application as outlined below: •Block Diagram •Schematics •Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed name: Jonathan Lee Title:Director of Product Development

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

INPUT: DC 5V, 1A MAX FCC ID: 2AJMW-BTSP111 IC: 20174-BTSP111 BTSPK111 230315 MADE IN PRC

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Bluetooth Antenna FM Antenna

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230310641-00B Page 60 of 61 5. RF EXPOSURE EVALUATION 5.1 1-mW Test Exemption 5.1.1 Applicable Standard According to 447498 D04 Interim General RF Exposure Guidance v01, clause 2.1.2- 1-mW Test Exemption: Per §1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption. 5.1.2 Measurement Result Frequency (MHz) Conducted output power including Tune- up Tolerance 1-mW Test Exemption (dBm) (mW) 2402-2480 -3.0 0.501 Compliant Result: Compliant. RF Exposure is exemption.

TEST REPORT Applicant: Edco Electronics Inc. Address: 8484 Avenue de l'Esplanade, Montréal, Québec H2P 2R7,Canada FCC ID: 2AJMW-BTSP111 IC: 20174-BTSP111 HVIN: BTSPK111 Product Name: Wireless LED Speaker Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 2, February 2017 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230310641-00B Date Of Issue: 2023/4/11 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230310641-00B Page 2 of 61 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230310641-00B Page 3 of 61 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 7 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 2. SUMMARY OF TEST RESULTS .......................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 3.1.1 Applicable Standard ..................................................................................................................................... 11 3.1.2 EUT Setup.................................................................................................................................................... 12 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 13 3.1.4 Test Procedure ............................................................................................................................................. 13 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 13 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 14 3.2.1 Applicable Standard ..................................................................................................................................... 14 3.2.2 EUT Setup.................................................................................................................................................... 14 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 15 3.2.4 Test Procedure ............................................................................................................................................. 15 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 16 3.3 20 DB BANDWIDTH ........................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View