2AJNM-WG50PLUSDigital Night Vision

- 0 - 12mp 6x50 Digital Night Vision Monocular INSTRUCTION MANUAL We appreciate your business and want to prove to you we are committed to providing you the best product and support in the field. By giving our customers a new state of the art web interface, which provides you with video tutorials and instruction on how to use the product in the - 1 - most effective way. Version_2.0 12mp 6x50 Digital Night Vision Monocular Model NO: WG-50 PLUS - 2 - INSTRUCTION MANUAL We appreciate your business and want to prove to you we are committed to providing you the best product and support in the field. By giving our customers a new state of the art web interface, which provides you with video tutorials and instruction on how to use the product in the most effective way. Version_2.0 CONTENTS Overview.....................................................................................3-4 Camera Setup and Program Controls/Function.....................................................................5-7 Display Icons............................................................................ 8 Setup And Basic Operation .....................................................8 Other Operations .....................................................................9 Menu Setting .............................................................................11 WIFI share .................................................................................12 Firmware upgrade......................................................................15 Appendix I: Technical Specification....................................................15 Appendix II: Parts List.....................................................................17 Appendix III: Warranty and Cautions.................................................18 - 3 - I、Overview - 4 - 1 Objective lens cover 10 Battery compartment 2 Objective lens 11 Eye piece lens 3 IR LED 12 Mounting rail 4 Power button 13 TV OUT Jack 5 +Zoom/Back button 14 USB Port 6 -Zoom/Select button 15 Micro SD card Port 7 Screen Brightness/ 4seconds MENU button 16/17 Photo/Video Switch 8 IR/Down button/Playback(long press 4s) 18 Port/Jack cover 9 Record/OK button/ 19/20 Battery polarity marks(+ to +/ - to - 5 - WIFI function(long press 4s) Build in 1.5” TFT screen ABOUT DIGITAL NIGHT VISION Congratulations on the purchase of your Digital Night Vision. Comprised of high quality electronics and optics, it is a hand-held digital night vision viewing system that utilizes an infrared sensitive CMOS sensor, providing edge-to-edge resolution and outstanding image quality. Fully multi-coated optics increase light transmission and decrease glare. The 6x50 Digital Night Vision monocular is versatile enough for many applications including hunting, camping, boating/fishing, caving, paintball, stargazing, rescue/recovery, security surveillance, law enforcement, and video recording in continuously changing light conditions – from dawn to absolute darkness. Not only can you view your subject at night, you can also record its image as a still photo or video clip, and store it on micro SD card. The 6x50 Digital Night Vision units also include a video output port (user switchable to NTSC or PAL standard), which allows connection to video or computer equipment for recording or "live" monitoring. A built-in accessory mounting rail enables the user to attach a more powerful IR illuminator or other compatible accessories. HOW DIGITAL NIGHT VISION WORKS Digital Night Vision products collect existing light through the objective lens. The image is then processed through a digital CMOS sensor module and transferred to the micro liquid crystal display (LCD). Images viewed on the LCD are magnified 6 times. Digital Night Vision models are equipped with a built-in powerful IR (infrared) illuminator that enables clear viewing in low ambient light conditions or even total darkness. II、Camera Setup and Program Special Care instructions: z Accepts up to 64GB Micro SD card for photo storage. Do not insert/remove Micro SD card and batteries when digital camera is on. (Format Micro SD card before using, insert Micro SD card by correct front and back side) z Turn the battery compartment cover in a counter-clockwise direction to remove it, and insert 4 AA batteries as indicated inside the battery compartment. Lithium AA batteries are recommended for maximum running time, but alkaline or rechargeable NiMh AAs may be used as well. Do NOT mix battery types, or new and old batteries. Remove the batteries if the unit will be stored for a month or longer between uses. z Do not clean lenses and unit surfaces with paper based products, such as newspaper, textbook paper, etc. as it can damage the coating. z Avoid removing the eyepiece as the LCD display could become damaged. z Do not leave the device in direct sunlight or rain. The unit is water resistant, but is not designed for prolonged exposure to moisture and cannot be submerged in water. - 6 - z Avoid dropping or otherwise shocking the unit. Although designed for rugged outdoor use, the device incorporates sophisticated digital circuitry which could be damaged in extreme cases of misuse. z Keep camera power ON while upgrading the device. CONTROLS/FUNCTIONS 1, POWER BUTTON The Power button turns the unit on or off. z Press and hold the power button for 3 seconds to turn the unit ON z Press and hold the power button for 3 seconds to turn the unit OFF 2, DIGITAL ZOOM BUTTONS The “+” and “-“ buttons adjust the digital zoom power, with a range of 1.0x to 5.0x. Hold the button down to zoom in/out rapidly. The Digital Zoom icon at the lower left corner of the display will indicate the magnification factor, from 1.0x to 5.0x (in 0.1x increments). z Pressing and releasing the “+” button will gradually “zoom in” to the subject in view, by 0.1x increments. z Pressing and releasing the “+“ button will rapidly zoom in, until the maximum 5.0x magnification factor is reached. z Pressing and releas…

Text truncated - open the document above for the full version.

SHENZHEN SIYUAN DIGITAL TECHNOLOGY CO.,LTD Add: Room 19-20, 6A, Longtaili Building, No. 30 Gaoxin Central Avenue 4th, Hi-tech Park Nanshan, Shenzhen 518057, China Date: 2022-4-2 FCC ID: 2AJNM-WG50PLUS Dear Sir/Madam, We, SHENZHEN SIYUAN DIGITAL TECHNOLOGY CO.,LTD Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: Digital Night Vision Model no.: WG-50 Plus, WG-50,WG-80,NV-880,NV-800 Plus,NV-900,NV-900 Plus,NV-1000 Sincerely, Name/Title： Sun fengping/Majordomo Company: SHENZHEN SIYUAN DIGITAL TECHNOLOGY CO.,LTD Address: Room 19-20, 6A, Longtaili Building, No. 30 Gaoxin Central Avenue 4th, Hi-tech Park Nanshan, Shenzhen 518057, China Phone: 86-755-82867537 Fax: 86-755-82867540 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2022-4-2> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2AJNM-WG50PLUS WG-50 Plus For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Sun fengping/Majordomo Company: SHENZHEN SIYUAN DIGITAL TECHNOLOGY CO.,LTD Address: Room 19-20, 6A, Longtaili Building, No. 30 Gaoxin Central Avenue 4th, Hi-tech Park Nanshan, Shenzhen 518057, China Phone: 86-755-82867537 Fax: 86-755-82867540 E-Mail: [email protected]

SHENZHEN SIYUAN DIGITAL TECHNOLOGY CO.,LTD Room 19-20, 6A, Longtaili Building, No. 30 Gaoxin Central Avenue 4th, Hi-tech Park Nanshan, Shenzhen 518057, China Date: 2022-4-2 FCC ID: 2AJNM-WG50PLUS Model Number: WG-50 Plus To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, SHENZHEN SIYUAN DIGITAL TECHNOLOGY CO.,LTD, declare that this EUT (FCC ID: 2AJNM-WG50PLUS) doesn’t have Ad Hoc mode function on “non-US/Canada frequencies”. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title： Sun fengping/Majordomo Company: SHENZHEN SIYUAN DIGITAL TECHNOLOGY CO.,LTD Address: Room 19-20, 6A, Longtaili Building, No. 30 Gaoxin Central Avenue 4th, Hi-tech Park Nanshan, Shenzhen 518057, China Phone: 86-755-82867537 Fax: 86-755-82867540 E-Mail: [email protected]

SHENZHEN SIYUAN DIGITAL TECHNOLOGY CO.,LTD Room 19-20, 6A, Longtaili Building, No. 30 Gaoxin Central Avenue 4th, Hi-tech Park Nanshan, Shenzhen 518057, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2022-4-2 To whom it may concern: We, SHENZHEN SIYUAN DIGITAL TECHNOLOGY CO.,LTD the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AJNM-WG50PLUS including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Sun fengping/Majordomo Company: SHENZHEN SIYUAN DIGITAL TECHNOLOGY CO.,LTD Address: Room 19-20, 6A, Longtaili Building, No. 30 Gaoxin Central Avenue 4th, Hi-tech Park Nanshan, Shenzhen 518057, China Phone: 86-755-82867537 Fax: 86-755-82867540 E-Mail: [email protected]

Page 1 of 6 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. EUT Constructional Details External EUT Photo Photo 1 Photo 2 Page 2 of 6 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Page 3 of 6 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 Page 4 of 6 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 Photo 8 Page 5 of 6 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 9 Photo 10 Page 6 of 6 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 11 Photo 12 ------End------

FCC ID Label FCC ID:2AJNM-WG50PLUS

Page 1 of 7 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. EUT Constructional Details Internal EUT Photo Photo 1 Photo 2 Page 2 of 7 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Page 3 of 7 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 Antenna Page 4 of 7 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 Photo 8 Page 5 of 7 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 9 Photo 10 Page 6 of 7 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 11 Photo 12 Antenna Page 7 of 7 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 13 Photo 14 ------End------

RF Exposure evaluation FCC ID: 2AJNM-WG50PLUS 1.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure requirement KDB447498 v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 1.2. Requirement According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. WIFI(Peak) IEEE 802.11b (PEAK) Antenna 1 Frequency (MHz) 2412 2437 2462 Target (dBm) 6 8 8 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11g (PEAK) Antenna 1 Frequency (MHz) 2412 2437 2462 Target (dBm) 6 7 8 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11n HT20 (PEAK) Antenna 1 Frequency (MHz) 2412 2437 2462 Target (dBm) 5 6 7 Tolerance ± (dB) 1.0 1.0 1.0 IEEE 802.11n HT40 (PEAK) Antenna 1 Frequency (MHz) 2422 2437 2452 Target (dBm) 3 4 5 Tolerance ± (dB) 1.0 1.0 1.0 2. Evaluation Result Standalone Antenna 1 RF output power including tune up Band/Mode f (GHz) Antenna Distance (mm) dBm mW SAR Test Exclusion Threshold SAR Test Exclusion Estimated SAR WiFi 2.5 5 9 7.94 2.51< 3 Yes 0.3349 Remark: 1. Output power including tune up tolerance; 2. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test exclusion. 3. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06, No SAR is required. .....................End.........................

Page 1 of 39 Report No.: AIT22030403W1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. TEST REPORT Client Information: Applicant: SHENZHEN SIYUAN DIGITAL TECHNOLOGY CO.,LTD Applicant add.: Room 19-20, A6, Longtaili Building, No. 30 Gaoxin Central Avenue 4th, Hi-tech Park Nanshan, Shenzhen518057, China Manufacturer: SHENZHEN SIYUAN DIGITAL TECHNOLOGY CO.,LTD Manufacturer add.: Room 19-20, A6, Longtaili Building, No. 30 Gaoxin Central Avenue 4th, Hi-tech Park Nanshan, Shenzhen518057, China Product Information: Product Name: Digital Night Vision Model No.: WG-50 Plus, WG-50,WG-80,NV-880,NV-800 Plus,NV-900,NV-900 Plus,NV-1000 Brand Name: Bestguarder,Digicool,Nightiger FCC ID: 2AJNM-WG50PLUS Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Prepared By: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang,Dongguan, Guangdong, China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Date of Receipt: Mar. 04, 2022 Date of Test: Mar. 04, 2022~ Mar. 21, 2022 Date of Issue: Mar. 22, 2022 Test Result: Pass This device described above has been tested by Dongguan Yaxu (AiT) Technology Limited and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Note: This report shall not be reproduced except in full, without the written approval of Dongguan Yaxu (AiT) Technology Limited, this document may be altered or revised by Dongguan Yaxu (AiT) Technology Limited, personal only, and shall be noted in the revision of the document. This test report must not be used by the client to claim product endorsement. Reviewed by: Approved by: Simba Huang Seal.chen Page 2 of 39 Report No.: AIT22030403W1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. 1 Contents Page COVER PAGE 1 CONTENTS .................................................................................................................................................................... 2 2 TEST SUMMARY .......................................................................................................................................................... 4 2.1 Statement of the Measurement Uncertainty .............................................................................. 4 2.2 Measurement Uncertainty ......................................................................................................... 4 3 TEST FACILITY ............................................................................................................................................................. 5 3.1 Deviation from standard ............................................................................................................ 5 3.2 Abnormalities from standard conditions .................................................................................... 5 3.3 Test Location ............................................................................................................................. 5 4 GENERAL INFORMATION ......................................................................................................................................... 6 4.1 Test frequencies ........................................................................................................................ 7 4.2 EUT Peripheral List ................................................................................................................... 7 4.3 Test Peripheral List ................................................................................................................... 7 4.4 TEST METHODOLOGY............................................................................................................ 8 4.4.1 EUT Configuration ......................................................................................................................... 8 4.4.2 EUT Exercise ................................................................................................................................ 8 4.4.3 General Test Procedures ............................................................................................................... 8 4.5 Description of Test Modes ......................................................................................................... 9 5 EQUIPMENT USED DURING TEST ........................................................................................................................ 10 6 TEST RESULTS AND MEASUREMENT DATA .................................................................................................... 11 6.1 Antenna requirement .............................................................................................................. 11 6.2 On Time and Duty Cycle ......................................................................................................... 12 6.3 Maximum Conducted Output Peak Power Measurement ....................................................... 13 6.4 6 dB Spectrum Bandwidth Measurement ................................................................................ 14 6.5 Power Spectral Density ........................................................................................................... 15 6.6 Conducted Spurious Emissions and Band Edges Test ........................................................... 17 6.7 Restrict-band Band-edge Measurements ............................................................................... 19 6.8 Radiated Emissions Measurement ......................................................................................... 22 6.9 Conducted Emissions ............................................................................................................. 38 7 TEST SETUP PHOTO ..................................…

Text truncated - open the document above for the full version.

Dongguan Yaxu(AiT) Technology Limited Report No.: AIT22030403W1 FCC ID: 2AJNM-WG50PLUS Page 1 of 56 Appendix C RF Test Data for 2.4GWIFI (Conducted Measurement) Product Name: Digital Night Vision Trade Mark: Bestguarder,Digicool,Nightiger Test Model: WG-50 Plus Environmental Conditions Temperature: 24.7° C Relative Humidity: 52.4% ATM Pressure: 100.0 kPa Test Engineer: Simba Huang Supervised by: Seal Chen Dongguan Yaxu(AiT) Technology Limited Report No.: AIT22030403W1 FCC ID: 2AJNM-WG50PLUS Page 2 of 56 Contents Page COVER PAGE 1 Duty Cycle ........................................................................................................................................................................................... 3 1.1 Test Result............................................................................................................................................................................... 3 1.2 Test Graphs ............................................................................................................................................................................. 4 2 Maximum Conducted Output Peak Power ........................................................................................................................................ 10 2.1 Test Result............................................................................................................................................................................. 10 3 -6dB Bandwidth ................................................................................................................................................................................. 11 3.1 Test Result............................................................................................................................................................................. 11 3.2 Test Graphs ........................................................................................................................................................................... 12 4 Maximum Power Spectral Density Level ........................................................................................................................................... 18 4.1 Test Result............................................................................................................................................................................. 18 4.2 Test Graphs ........................................................................................................................................................................... 19 5 Band Edge......................................................................................................................................................................................... 25 5.1 Test Result............................................................................................................................................................................. 25 5.2 Test Graphs ........................................................................................................................................................................... 26 6 Conducted RF Spurious Emission..................................................................................................................................................... 34 6.1 Test Result............................................................................................................................................................................. 34 6.2 Test Graphs ........................................................................................................................................................................... 35 7 Restrict Band ..................................................................................................................................................................................... 47 7.1 Test Result............................................................................................................................................................................. 47 7.2 Test Graphs ........................................................................................................................................................................... 49 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT22030403W1 FCC ID: 2AJNM-WG50PLUS Page 3 of 56 1 Duty Cycle 1.1 Te s t Result Mode Frequency (MHz) Antenna Duty Cycle (%) 1/T (kHz) b 2412 Ant1 99.93 0.12 b 2437 Ant1 99.76 0.12 b 2462 Ant1 99.93 0.12 g 2412 Ant1 99.59 0.24 g 2437 Ant1 99.75 0.72 g 2462 Ant1 99.62 0.72 n20 2412 Ant1 99.56 0.77 n20 2437 Ant1 99.73 0.38 n20 2462 Ant1 99.58 0.38 n40 2422 Ant1 95.3 1.61 n40 2437 Ant1 100 0 n40 2452 Ant1 97.08 1.59 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT22030403W1 FCC ID: 2AJNM-WG50PLUS Page 4 of 56 1.2 Test Graphs Test Graphs b 2412MHz Ant1 b 2437MHz Ant1 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT22030403W1 FCC ID: 2AJNM-WG50PLUS Page 5 of 56 Test Graphs b 2462MHz Ant1 g 2412MHz Ant1 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT22030403W1 FCC ID: 2AJNM-WG50PLUS Page 6 of 56 Test Graphs g 2437MHz Ant1 g 2462MHz Ant1 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT22030403W1 FCC ID: 2AJNM-WG50PLUS Page 7 of 56 Test Graphs n20 2412MHz Ant1 n20 2437MHz Ant1 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT22030403W1 FCC ID: 2AJNM-WG50PLUS Page 8 of 56 Test Graphs n20 2462MHz Ant1 n40 2422MHz Ant1 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT22030403W1 FCC ID: 2AJNM-WG50PLUS Page 9 of 56 Test Graphs n40 2437MHz Ant1 n40 2452MHz Ant1 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT22030403W1 FCC ID: 2AJNM-WG50PLUS Page 10 of 56 2 Maximum Conducted Output Peak Power 2.1 Test Result Mode Frequency (MHz) AntennaConducted Power (dBm)Limit (dBm) Verdict b 2412 Ant1 6.41 30 Pass b 2437 Ant1 8.04 30 Pass b 2462…

Text truncated - open the document above for the full version.

Page 1 of 1 FCC ID: 2AJNM-WG50PLUS Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Test Setup Photo Radiated Emission ------End------