2AJNO-12PFARMAeroGarden

AG_QSG_Farm12_061520_OL.indd 1AG_QSG_Farm12_061520_OL.indd 16/15/20 2:27 PM6/15/20 2:27 PM AG_QSG_Farm12_061520_OL.indd 2AG_QSG_Farm12_061520_OL.indd 26/15/20 2:27 PM6/15/20 2:27 PM AG_QSG_Farm12_061520_OL.indd 3AG_QSG_Farm12_061520_OL.indd 36/15/20 2:27 PM6/15/20 2:27 PM AG_QSG_Farm12_061520_OL.indd 4AG_QSG_Farm12_061520_OL.indd 46/15/20 2:27 PM6/15/20 2:27 PM AG_QSG_Farm12_061520_OL.indd 5AG_QSG_Farm12_061520_OL.indd 56/15/20 2:27 PM6/15/20 2:27 PM AG_QSG_Farm12_061520_OL.indd 6AG_QSG_Farm12_061520_OL.indd 66/15/20 2:28 PM6/15/20 2:28 PM AG_QSG_Farm12_061520_OL.indd 7AG_QSG_Farm12_061520_OL.indd 76/15/20 2:28 PM6/15/20 2:28 PM 8:14 AM CLOCK: Set your AeroGarden Farm’s clock to your local time. WI-FI: The Wi-Fi icon allows you to access the Wi-Fi setting of your AeroGarden Farm, as well as connect your AeroGarden Farm to your AeroGarden App. LIGHT: The Light icon shows the current time, as well as when your light is scheduled to turn On and Off each day. WATER: The Water icon reminds you when it is time to add water, and when pressed also displays the current pump setting and test pump feature. On/Off LIGHT ON/OFF: Temporarily turns lights On or Off. Your lights will automatically go back to their programmed settings at the start of the next On/Off cycle. PLANT FOOD: The Plant Food icon shows how many days are left until it is time to add Plant Food. LIGHT UP/DOWN: The up and down arrows next to your light icon allows you to raise and lower your grow lights. Keep your lights 4-6 inches above your plants for better results. Quick Plant QUICK PLANT: Press the Quick Plant button to start a new garden, and follow the simple step by step instructions to set up all garden functions. Drain: Press to perform a rinse and refill. More Options MORE OPTIONS: The More Options button gives you access to a wide variety of garden functions, as detailed next. 8:14 AM AG_QSG_Farm12_061520_OL.indd 8AG_QSG_Farm12_061520_OL.indd 86/15/20 2:28 PM6/15/20 2:28 PM AG_QSG_Farm12_061520_OL.indd 9AG_QSG_Farm12_061520_OL.indd 96/15/20 2:28 PM6/15/20 2:28 PM AG_QSG_Farm12_061520_OL.indd 10AG_QSG_Farm12_061520_OL.indd 106/15/20 2:28 PM6/15/20 2:28 PM AG_QSG_Farm12_061520_OL.indd 11AG_QSG_Farm12_061520_OL.indd 116/15/20 2:28 PM6/15/20 2:28 PM AG_QSG_Farm12_061520_OL.indd 12AG_QSG_Farm12_061520_OL.indd 126/15/20 2:28 PM6/15/20 2:28 PM AG_QSG_Farm12_061520_OL.indd 13AG_QSG_Farm12_061520_OL.indd 136/15/20 2:28 PM6/15/20 2:28 PM AG_QSG_Farm12_061520_OL.indd 14AG_QSG_Farm12_061520_OL.indd 146/15/20 2:28 PM6/15/20 2:28 PM AG_QSG_Farm12_061520_OL.indd 15AG_QSG_Farm12_061520_OL.indd 156/15/20 2:28 PM6/15/20 2:28 PM AG_QSG_Farm12_061520_OL.indd 16AG_QSG_Farm12_061520_OL.indd 166/15/20 2:28 PM6/15/20 2:28 PM

Differences Declaration To whom it may concern, We AeroGrow International, Inc. hereby declare: The product model 100022-XXX, 100023-XXX (Where the suffix XXX are alphabetical letters A to Z, denote the different enclosure color) are identical in the same PCB layout, interior structure and electrical circuits with the model 100023-BLK which has been tested by Global Unit Technology Co., Ltd., the only differences are the model name, the enclosure color and the high of appliance. Authorized signature: Date: June 16, 2020

DATE : 2020-06-15 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with AeroGrow International, Inc. and 6075 Longbow Dr. Suite #200, Boulder, Colorado 80301, United States Signature: Name: Mely Wilcox Title: Product/Project Manager Company: AeroGrow International, Inc.

AeroGrow International, Inc. DATE : 2020-06-15 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AJNO-12PFARM Product Name: AeroGarden Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature: Name: Mely Wilcox Title: Product/Project Manager Company: AeroGrow International, Inc.

Test model number: 100022-BLK

100022-BLK_Label sample and label location 100 024-BLK_Label sample a nd label location

Art Paper Material

Test model number: 100022-BLK

FCC ID: 2AJNO-12PFARM RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation WiFi mode Channel Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result Lowest (2412MHz) 58.884 0.01857 1.0 PASS Middle (2437MHz) 55.463 0.01749 1.0 PASS Highest (2462MHz) 52.602 0.01659 1.0 PASS Remark: antenna gain=2dBi

Global United Technology Services Co., Ltd. Report No.: GTS202005000158F01 Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 50 TEST REPORT Applicant: AeroGrow International, Inc. Address of Applicant: 6075 Longbow Dr. Suite #200, Boulder, Colorado 80301, United States Manufacturer: AeroGrow International, Inc. Address of Manufacturer: 6075 Longbow Dr. Suite #200, Boulder, Colorado 80301, United States Factory: Zhangzhou Wanlida ZhonghuanTechnology Inc Address of Factory: 10# Jin da Road, Wanlida Industry Zone, Jinfeng, Zhangzhou, Fujian, China Equipment Under Test (EUT) Product Name: AeroGarden Model No.: 100022-XXX, 100023-XXX (Where the suffix XXX are alphabetical letters A to Z, denote the different enclosure color) Trade Mark: AeroGarden FCC ID: 2AJNO-12PFARM Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: June 03, 2020 Date of Test: June 03-15, 2020 Date of report issued: June 15, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202005000158F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A,Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 50 2 Version Version No. Date Description 00 June 15, 2020 Original Prepared By: Date: June 15, 2020 Project Engineer Check By: Date: June 15, 2020 Reviewer Report No.: GTS202005000158F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A,Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 50 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................... 7 5.6 TEST FACILITY .................................................................................................................................... 7 5.7 TEST LOCATION ................................................................................................................................. 7 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 10 7.1 ANTENNA REQUIREMENT ................................................................................................................... 10 7.2 CONDUCTED EMISSIONS ................................................................................................................... 11 7.3 CONDUCTED PEAK OUTPUT POWER .................................................................................................. 14 7.4 CHANNEL BANDWIDTH ...................................................................................................................... 15 7.5 POWER SPECTRAL DENSITY ............................................................................................................. 18 7.6 BAND EDGES .................................................................................................................................... 21 7.6.1 Conducted Emission Method ..................................................................................................... 21 7.6.2 Radiated Emission Method ........................................................................................................ 24 7.7 SPURIOUS EMISSION ......................................................................................................................... 30 7.7.1 Conducted Emission Method ..................................................................................................... 30 7.7.2 Radiated Emission Method ........................................................................................................ 33 8 TEST SETUP PHOTO ............................................................................................................................ 50 9 E…

Text truncated - open the document above for the full version.

GTS202005000158 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 1 of 2 Product Name: AeroGarden Test Model No.: 100022-BLK Test Setup Photo Radiated Emission GTS202005000158 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 2 Conducted Emission ------End------