2AJOF-STORM800Vaxis Strom 800

VAXIS STORM 800 INSTRUCIONS wireless video transmission system supporting HDMI & SDI (VAXIS STORM 800) 800 Product model and standard 2. About Product model and standard The VAXIS STORM 800 Wireless HDMI/SDI Transmission Suite utilize today’s most advanced wireless video transmission technology, which can realize the broadcast-class and uncompressed 3G SDI/HDMI HD video signal transmitted with no compression and zero delay. The suite includes one transmitter and one receiver, where the transmitter provides a 3G/HD SDI input and a HDMI input, and the receiver also provides a 3G/HD SDI output and a HDMI output. can work in5.1-5.9GHz frequency band and be flexibly software configured to licensed or ISM band of global different regions, as well as the side panel of both transmitter and receiver have been installed a control panel with OLED, which provides maximum 0 workable frequency channels, and supports maximum 0 sets working simultaneously. The wireless suite can accept wide range DC power input, which is suitable for many kinds of camera battery model. The suite also can sustain ±8 kV ESD (HBM, contact discharge), the industry class metal case and professional heat design would guarantee most robust reliability. 850ft 248g / 359g (L x W x H): 115 x 69 x 24mm Product introduction Transmitter: 1 OLED Screen 23G-SDI Input 33G SDI Output 4 HDMI Input 5 Channel Button “-” 6 Channel Button “+”*Long press the buttons to adjust the Fan 7DC input, LEMO 2-pin B series connector 8 DC power switch Receiver: OLED Screen Channel Button “-” N-PF N-PF 2x Blade Antenna (Single) 1x Flight case

Hunan GM Innovation Technology Co., Ltd. Covered Equipment Certification Attestation Letter 11/5/2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AJOF-STORM800 Hunan GM Innovation Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Hunan GM Innovation Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Hunan GM Innovation Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: yong zhnag Title: Manager Company Name: Hunan GM Innovation Technology Co., Ltd. Date: 11/5/2025

Hunan GM Innovation Technology Co., Ltd. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: November 5, 2025 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2AJOF-STORM800 Hunan GM Innovation Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Hunan GM Innovation Technology Co., Ltd. FRN: 0025860982 Address: 26th Floor, Building 10, Zone B, Greenland V Island, Yuehu Street, Kaifu District, Changsha City, Hunan Province, China Signature: Contact Person: yong zhnag Tel: +86-18569563533 Email: [email protected]

DATE: November 5, 2025 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AJOF-STORM800 Product Name: Vaxis Strom 800 Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name: yong zhnag Title: Manager Company: Hunan GM Innovation Technology Co., Ltd.

Date: November 5, 2025 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name: yong zhnag Title: Manager Company: Hunan GM Innovation Technology Co., Ltd.

DATE: November 5, 2025 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen CCUT Quality Technology Co., Ltd. (1F, Building 35, Changxing Technology Indstrl Park Changzhen Community, Yutang Street,Shenzhen,China) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Hunan GM Innovation Technology Co., Ltd. (26th Floor, Building 10, Zone B, Greenland V Island, Yuehu Street, Kaifu District, Changsha City, Hunan Province, China). <Signature> Name: yong zhnag Title: Manager Applicant Company: Hunan GM Innovation Technology Co., Ltd.

Hunan GM Innovation Technology Co., Ltd. Model Difference Statement FCC ID: 2AJOF-STORM800 DATE: November 5, 2025 Dear Sir/Madam, Added models VS25-800-TR02 basis of the original product VS25-800-TR01.The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: yong zhnag Company name: Hunan GM Innovation Technology Co., Ltd. Address: 26th Floor, Building 10, Zone B, Greenland V Island, Yuehu Street, Kaifu District, Changsha City, Hunan Province, China

Report No: SSP25090189-1&2E FCC ID: 2AJOF-STORM800 Annex of Test Report Annex A. EUT External Photos Model: VS25-800-TR01 EUT View 1 EUT View 2 Only for receiving Report No: SSP25090189-1&2E FCC ID: 2AJOF-STORM800 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP25090189-1&2E FCC ID: 2AJOF-STORM800 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP25090189-1&2E FCC ID: 2AJOF-STORM800 Annex of Test Report EUT View 7 EUT View 8 Report No: SSP25090189-1&2E FCC ID: 2AJOF-STORM800 Annex of Test Report EUT View 9 EUT View 10 External ANT 1 External ANT 2

Report No: SSP25090189-1&2E FCC ID: 2AJOF-STORM800 Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

Report No: SSP25090189-1&2E FCC ID: 2AJOF-STORM800 Annex of Test Report Annex B. EUT Internal Photos Model: VS25-800-TR01 EUT Internal View 1 EUT Internal View 2 Report No: SSP25090189-1&2E FCC ID: 2AJOF-STORM800 Annex of Test Report EUT Internal View 3 EUT Internal View 4 Report No: SSP25090189-1&2E FCC ID: 2AJOF-STORM800 Annex of Test Report EUT Internal View 5

FCC ID: 2AJOF-STORM800 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f2) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f2) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2, Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation Worst Case: Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 5.8G Wi-Fi MIMO 13.8 23.99 0.0164 1.0 PASS 5GHz ANT 1=2.34dBi., 5GHz ANT 2=2.11dBi.; Sum 5GWiFi: 5.35dBi; Ratios = Power Density / Power density Limit

Page 1 of 3 1. General Inf ormation 1.1 Antenna Information Manufacturer: Hunan GM Innovation Technology Co., Ltd. Address of Manufacturer: No 46, Jiefang East Road, Furong District, Changsha City, Hunan Province, China Product Name: External Antenna Model Name: VS25-800-TR01 Frequency Range: 5745MHz ~5825MHz Type of Antenna: External Antenna Antenna Gain: 2.34dBi (Max.) Impedance: 50 ohm Antenna View: Length * Width (173mm * 18mm) Page 2 of 3 2. Antenna Specification inf ormation 2.1 Gain Frequency Peak Gain (dBi) Polarity 5745MHz 2.34 Horizontal 5745MHz 2.14 Vertical 5785MHz 2.24 Horizontal 5785MHz 2.05 Vertical 5825MHz 2.26 Horizontal 5825MHz 1.84 Vertical Page 3 of 3 2.2 Radiation Pattern View

Page 1 of 3 1. General Inf ormation 1.1 Antenna Information Manufacturer: Hunan GM Innovation Technology Co., Ltd. Address of Manufacturer: No 46, Jiefang East Road, Furong District, Changsha City, Hunan Province, China Product Name: External Antenna Model Name: VS25-800-TR01 Frequency Range: 5745MHz ~5825MHz Type of Antenna: External Antenna Antenna Gain: 2.11dBi (Max.) Impedance: 50 ohm Antenna View: Length * Width (173mm * 18mm) Page 2 of 3 2. Antenna Specification inf ormation 2.1 Gain Frequency Peak Gain (dBi) Polarity 5745MHz 2.07 Horizontal 5745MHz 2.04 Vertical 5785MHz 1.96 Horizontal 5785MHz 1.87 Vertical 5825MHz 2.11 Horizontal 5825MHz 2.01 Vertical Page 3 of 3 2.2 Radiation Pattern View

Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 Test Data Appendix of Test Report 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT OFDM 5745 Ant1 74.42 1.28 4.46 NVNT OFDM 5785 Ant1 75.42 1.23 4.46 NVNT OFDM 5825 Ant1 77.24 1.12 4.46 NVNT OFDM 5745 Ant2 76.71 1.15 4.46 NVNT OFDM 5785 Ant2 58.44 2.33 4.44 NVNT OFDM 5825 Ant2 77.59 1.1 4.44 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 Duty Cycle NVNT n20 5745MHz Ant1 Duty Cycle NVNT n20 5785MHz Ant1 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 Duty Cycle NVNT n20 5825MHz Ant1 Duty Cycle NVNT n20 5745MHz Ant2 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 Duty Cycle NVNT n20 5785MHz Ant2 Duty Cycle NVNT n20 5825MHz Ant2 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Duty Factor (dB) Total Power (dBm) Limit (dBm) Verdict NVNT OFDM 5745 Ant1 7.96 1.28 9.24 30 Pass NVNT OFDM 5785 Ant1 8.88 1.23 10.11 30 Pass NVNT OFDM 5825 Ant1 8.68 1.12 9.8 30 Pass NVNT OFDM 5745 Ant2 8.02 1.15 9.17 30 Pass NVNT OFDM 5785 Ant2 9.05 2.33 11.38 30 Pass NVNT OFDM 5825 Ant2 9.18 1.1 10.28 30 Pass NVNT OFDM 5745 MIMO - - 12.21 30 Pass NVNT OFDM 5785 MIMO - - 13.8 30 Pass NVNT OFDM 5825 MIMO - - 13.06 30 Pass Note 1: Total power=Conducted power + Duty factor; MIMO Power=ANT1 Power+ANT2 Power Note 2: Note 2: Antenna Gain: ANT1: 2.34dBi, ANT2: 2.11dBi, Sum: 5.35dBi. Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 Power NVNT n20 5745MHz Ant1 Power NVNT n20 5785MHz Ant1 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 Power NVNT n20 5825MHz Ant1 Power NVNT n20 5745MHz Ant2 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 Power NVNT n20 5785MHz Ant2 Power NVNT n20 5825MHz Ant2 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 3. -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT OFDM 5745 Ant1 17.698 0.5 Pass NVNT OFDM 5785 Ant1 17.715 0.5 Pass NVNT OFDM 5825 Ant1 17.663 0.5 Pass NVNT OFDM 5745 Ant2 17.688 0.5 Pass NVNT OFDM 5785 Ant2 17.659 0.5 Pass NVNT OFDM 5825 Ant2 17.695 0.5 Pass Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 -6dB Bandwidth NVNT n20 5745MHz Ant1 -6dB Bandwidth NVNT n20 5785MHz Ant1 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 -6dB Bandwidth NVNT n20 5825MHz Ant1 -6dB Bandwidth NVNT n20 5745MHz Ant2 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 -6dB Bandwidth NVNT n20 5785MHz Ant2 -6dB Bandwidth NVNT n20 5825MHz Ant2 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 4. Occupied Channel Bandwidth Condition Mode Frequency (MHz) Antenna 99% OBW (MHz) NVNT OFDM 5745 Ant1 17.761 NVNT OFDM 5785 Ant1 17.729 NVNT OFDM 5825 Ant1 17.73 NVNT OFDM 5745 Ant2 17.739 NVNT OFDM 5785 Ant2 17.755 NVNT OFDM 5825 Ant2 17.732 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 OBW NVNT n20 5745MHz Ant1 OBW NVNT n20 5785MHz Ant1 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 OBW NVNT n20 5825MHz Ant1 OBW NVNT n20 5745MHz Ant2 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 OBW NVNT n20 5785MHz Ant2 OBW NVNT n20 5825MHz Ant2 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 5. Maximum Power Spectral Density Level Condition Mode Frequency (MHz) Antenna Conducted PSD (dBm) Duty Factor (dB) 10log (500/510) Total PSD (dBm) Limit (dBm) Verdict NVNT OFDM 5745 Ant1 -5.49 1.28 -0.086 -4.30 30 Pass NVNT OFDM 5785 Ant1 -4.79 1.23 -0.086 -3.65 30 Pass NVNT OFDM 5825 Ant1 -4.61 1.12 -0.086 -3.58 30 Pass NVNT OFDM 5745 Ant2 -5.4 1.15 -0.086 -4.34 30 Pass NVNT OFDM 5785 Ant2 -4.44 2.33 -0.086 -2.20 30 Pass NVNT OFDM 5825 Ant2 -4.41 1.1 -0.086 -3.40 30 Pass NVNT OFDM 5745 MIMO - - - -1.31 30 Pass NVNT OFDM 5785 MIMO - - - 0.13 30 Pass NVNT OFDM 5825 MIMO - - - -0.46 30 Pass Note 1: Note: Total PSD = Conducted PSD + Duty Factor + (10log(Limit RBW/Test RBW)); MIMO PSD=ANT1 PSD+ANT2 PSD Note 2: Note 2: Antenna Gain: ANT1: 2.34dBi, ANT2: 2.11dBi, Sum: 5.35dBi. Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 PSD NVNT n20 5745MHz Ant1 PSD NVNT n20 5785MHz Ant1 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 PSD NVNT n20 5825MHz Ant1 PSD NVNT n20 5745MHz Ant2 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 PSD NVNT n20 5785MHz Ant2 PSD NVNT n20 5825MHz Ant2 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 6. Band Edge Condition Mode Frequency (MHz) Antenna Max Value (dBm) Verdict NVNT OFDM 5745 Ant1 -40.99 Pass NVNT OFDM 5825 Ant1 -41.41 Pass NVNT OFDM 5745 Ant2 -36.64 Pass NVNT OFDM 5825 Ant2 -44.03 Pass Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 Band Edge NVNT n20 5745MHz Low Ant1 Band Edge NVNT n20 5825MHz High Ant1 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 Band Edge NVNT n20 5745MHz Low Ant2 Band Edge NVNT n20 5825MHz High Ant2 Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 7. Conducted RF Spurious Emission Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict NVNT n20 5745 Ant1 -32.59 -27 Pass NVNT n20 5785 Ant1 -32.96 -27 Pass NVNT n20 5825 Ant1 -33.56 -27 Pass NVNT n20 5745 Ant2 -32.75 -27 Pass NVNT n20 5785 Ant2 -33.8 -27 Pass NVNT n20 5825 Ant2 -33.3 -27 Pass Note: Testing is carried out with frequency rang 30MHz to the 40GHz, 9kHz to 30MHz and above 27GHz not recorded for no spurious point have a margin of less than 20dB with respect to the limits. Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 Tx. Spurious NVNT n20 5745MHz Ant1 Emission Tx. Spurious NVNT n20 5785MHz Ant1 Emission Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 Tx. Spurious NVNT n20 5825MHz Ant1 Emission Tx. Spurious NVNT n20 5745MHz Ant2 Emission Report No: SSP25090189-1E FCC ID: 2AJOF-STORM800 Tx. Spurious NVNT n20 5785MHz Ant2 Emission Tx. Spurious NVNT n20 5825MHz Ant2 Emission

Report No: SSP25090189-1E FCC Test Report Page 1 of 29 FCC TEST REPORT FCC ID: 2AJOF-STORM800 Report No. : SSP25090189-1E Applicant : Hunan GM Innovation Technology Co., Ltd. Product Name : Vaxis Strom 800 Model Name : VS25-800-TR01 Test Standard : FCC Part 15 Subpart E Date of Issue : 2025-10-16 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25090189-1E FCC Test Report Page 2 of 29 Test Report Basic Information Applicant..................................: Hunan GM Innovation Technology Co., Ltd. Address of Applicant...............: 26th Floor, Building 10, Zone B, Greenland V Island, Yuehu Street, Kaifu District, Changsha City, Hunan Province, China Manufacturer..........................: Hunan GM Innovation Technology Co., Ltd. Address of Manufacturer........: 26th Floor, Building 10, Zone B, Greenland V Island, Yuehu Street, Kaifu District, Changsha City, Hunan Province, China Product Name.........................: Vaxis Strom 800 Brand Name.............................: VAXIS Main Model..............................: VS25-800-TR01 Series Models..........................: VS25-800-TR02 Test Standard..........................: FCC Part 15 Subpart E KDB 789033 D02 v02r01 ANSI C63.4-2014 ANSI C63.10-2020/Cor 1-2023 Date of Test .............................: 2025-09-25 to 2025-10-15 Test Result...............................: Passed Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25090189-1E FCC Test Report Page 3 of 29 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions(Below 1GHz)............................................................................................................................. 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 17 6. Spurious Emissions(Above 1GHz) ............................................................................................................................. 20 6.1 Standard and Limit.............................................................................................................................................. 20 6.2 Test Procedure.................................................................................................................................................... 20 6.3 Test Data and Results .....................................................................…

Text truncated - open the document above for the full version.

Report No: SSP25090189-1&2E FCC ID: 2AJOF-STORM800 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View 1 Radiated Emission Below 1GHz Report No: SSP25090189-1&2E FCC ID: 2AJOF-STORM800 Annex of Test Report Radiated Emission Test View 2 Radiated Emission Above 1GHz