Technical Specifications
| # | Rule Parts | Frequency Range | Power Output |
|---|
| 2 | 15E | 5.26 GHz - 5.32 GHz | 24.00 mW |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesOutput power is maximum average conducted. <br>
This device supports IEEE 802.11 a/n/ac/ax 20 and 40 MHz channel bandwidths. <br>
This device has integrated DTS and NII transmitters certified under the same FCC ID. <br>
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). <br>
The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.