2AJXA-JMFITFitness Tracker

6 support.itouchwearables.com For the full user manual, help, and answers to many common questions, visit us online: VISIT US ONLINE Enjoy your tracker! 5 Note: enable Bluetooth on your phone but only pair your tracker using mobile app. Power on the tracker (press and hold the side button for 5 seconds), open the mobile app, create an account, then tap the watch icon to begin pairing. Pairing sets the time and date on your tracker. PAIR YOUR TRACKER 4 Scan the QR code with your smartphone camera to download our free mobile app. DOWNLOAD APP The magnetic charging cable snaps into place. A charging screen will appear to confirm your tracker is charging. 3 FULLY CHARGE TRACKER 2 Note: avoid using fast-chargers Insert the cable into a computer USB port or UL-certified wall charger. CHARGING 1 Locate the tracker and charging cable inside the box. + UNPACK CONTENTS Line up the metal pins on the charging cable with the contacts on the back of the tracker and lower until it snaps into place. Charging can take up to 2 hours - Replacement of a battery with an incorrect type that can defeat a safeguard (for example,in the case of some lithium battery types); - Disposal of a battery into fire or a hot oven,or mechanically crushing or cutting of a battery, that can result in an explosion; - Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; - A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. BATTERY WARNING BATTERY WARNING CONT. - Operating temperature: - Charging: 0°C ~ 45°C - Discharging: -10°C ~ 60°C Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no – FCC REGULATORY COMPLIANCE – guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC REGULATORY COMPLIANCE (CONT.) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AJXA-JMFIT Product: Fitness Tracker Model No: JMTC4S01 The e-label can be found in the Information section of your device’s settings. - Open up Settings page - Select Regulatory Information - View e-label for product and compliance information. E-LABEL NAVIGATION FCC REGULATORY COMPLIANCE (CONT.)

CMYK 澶濣濬澗澩澥濇漑濇澿濉澗澾濁濈澷澨濇澤澥澡澻澤澦漑澵濗濨濝濪濙 CMYK CMYK CMYK

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name AX Technologies LLC Address 1441 Broadway 27th Floor New York 10018 United States Grantee Code 2AJXA FCC ID 2AJXA-JMFIT Authorized Contact Name Daisy Zhang Contact Email [email protected] Contact Phone 001-2122879047 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [ AX Technologies LLC] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [ AX Technologies LLC] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: Print Name: Daisy Zhang Title: Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database 03-27-2023

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-03-22 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: AX Technologies LLC Company Name: AX Technologies LLC Grantee Code: 2AJXA FRN 0025922931 Contact Name: Daisy Zhang Contact Name: Daisy Zhang Address: 1441 Broadway 27th Floor New York 10018 United States Address: 1441 Broadway 27th Floor New York 10018 United States City/Province/Zip: New York 10018 United States City/Province/Zip: New York 10018 United States Telephone: 001-2122879047 Telephone: 001-2122879047 Fax: 001-2125754812 Fax: 001-2125754812 Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2AJXA-JMFIT ATTN: Director of Certification: We, AX Technologies LLC understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, AX Technologies LLC acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Daisy Zhang Name (Printed): Daisy Zhang Title: Manager Title: Manager Signature: Signature:

AX Technologies LLC Date: 2023-03-22 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AJXA-JMFIT To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with AX Technologies LLC This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Daisy Zhang Title: Manager Signature: On behalf of Company: AX Technologies LLC Telephone: 001-2122879047 E-mail: [email protected]

AX Technologies LLC To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Regarding: Confidentiality Request regarding application for FCC ID: 2AJXA-JMFIT LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY（Remark：如下资料需要短期保密请选择天数0，45,90或者180天，短期保密期间产品不能在美国市场上售卖。 Additionally, the applicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within 0 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) 注：确认短期保密是否适用，如果适用请确认保密日期；短期保密期间产品不能在美国市场销售，如果销 售则需要通过FCC或TCB取消短期保密；如果不适用，则删掉打黄色部分。 Sincerely, Print Name: Daisy Zhang Title: Manager Signature: On behalf of Company: AX Technologies LLC Telephone: 001-2122879047 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 6 External Photos for SZCR2303000688AT FCC ID: 2AJXA-JMFIT SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 6 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 6 of 6

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 5 Internal Photos for SZCR2303000688AT FCC ID: 2AJXA-JMFIT SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 5 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300068803 Page: 1 of 10 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2303000688AT Applicant: AX Technologies LLC Address of Applicant: 1441 Broadway 27th Floor New York 10018 United States Manufacturer: AX Technologies LLC Address of Manufacturer: 1441 Broadway 27th Floor New York 10018 United States Factory: AX Technologies LLC Address of Factory: 1441 Broadway 27th Floor New York 10018 United States Equipment Under Test (EUT): EUT Name: Fitness Tracker Model No.: JMTC4S01-G02, JMTC4S01-G03, JMTC4S01-G10, JMTC4S01-G12, JMTC4S01 ♣ ♣ Please refer to section 3 of this report which indicates which model was actual tested and which were electrically identical. Trade Mark: iTouch, Jillian Michaels, iTouch Active FCC ID: 2AJXA-JMFIT Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-03-19 Date of Test: 2023-03-21 to 2023-03-28 Date of Issue: 2023-04-04 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300068803 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2023-04-04 Original Authorized for issue by: Leo Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300068803 Page: 3 of 10 2 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Contents ............................................................................................................................................. 3 3 General Information............................................................................................................................ 4 3.1 General Description of E.U.T. ....................................................................................................... 4 3.2 Separation Distance ..................................................................................................................... 4 3.3 Test Location ............................................................................................................................... 5 3.4 Test Facility .................................................................................................................................. 5 3.5 Deviation from Standards ............................................................................................................. 5 3.6 Abnormalities from Standard Conditions ....................................................................................... 5 4 FCC Radiofrequency radiation exposure limits ................................................................................ 6 4.1 Blanket 1 mW Blanket Exemption ................................................................................................. 6 4.2 MPE-based Exemption ................................................................................................................. 6 4.3 SAR-based Exemption ................................................................................................................. 7 5 Measurement and Calculation ..........................................................................................................10 5.1 Maximum transmit power ............................................................................................................10 5.2 RF Exposure Calculation .............................................................................................................10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300068803 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Power supply: Lithium Ion Battery: 3.7V 180mAh rechargeable battery which charged by USB port Cable(s): USB cable: 50cm unshielded Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.1 LE Data Rate: 1M/bps & 2M/bps Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: FPC Antenna Antenna Gain: -2.78 dBi Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.2 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300068803 Page: 5 of 10 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. All tests were performed at: 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference…

Text truncated - open the document above for the full version.

ShenZhenXingYuanChuangTechnologyCo.,Ltd Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] ApprovalSheet CustomerJindongfangData2023/03/21 ProductBTAntennasModelsW121 P/NB172CustomerP/N SpecificationsBlackFPC；Goldfingerplating VenderApprovedByCustomerApprovedBy CheckedBy:CheckedBy: AuditBy:AuditBy: ApprovalBy:ApprovalBy: FileRevisionTable VersionReviseTheContentRevused Approval DateNote ShenZhenXingYuanChuangTechnologyCo.,Ltd Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] Content NO.ProectPageNO. 1Specification3 2AntennaPlacement4 3AntennaMeasured4 4TestData5 5AntennaAssembly6 6InspectionStandard7 7OutgoingInspectionReport8 8PackingSpecification9 ShenZhenXingYuanChuangTechnologyCo.,Ltd Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict, Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] Specification 1.1 ElectricalProperties CharacteristicsSpecifications WorkingBand2.4GBT AntennaFromFPC Impedance50Ω PolarizationLinear PeakEffi16% @2.4G [email protected] 1.2 PhysicalProperties CharacteristicsSpecifications OperatingTemp -10 °C ~+60 °C StorageTemp -10 °C ~+70 °C Humidity10 ~95%RH ShenZhenXingYuanChuangTechnologyCo.,Ltd Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] AntennaPlacement AntennaMeasured ShenZhenXingYuanChuangTechnologyCo.,Ltd Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] TestData EfficiencyTable RadiationPattern ShenZhenXingYuanChuangTechnologyCo.,Ltd Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] AntennaAssembly ShenZhenXingYuanChuangTechnologyCo.,Ltd Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] InspectionStandard ShenZhenXingYuanChuangTechnologyCo.,Ltd Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] OutgoingInspectionReport Customer jindongfang Product BT Antennas Quantity shipped 5 Sampling quantity 2 Models W121 P/N B172 Shipping date 2023/03/23 Sampling standard ☑ Normalinspection □ Tightenedinspection □ Decrementinspection Sampling mode MIL-STD-105D（II） SinglesamplingAcceptancelimit AQL:CR：0Maj：2.5Min：4.0 Qualityacceptancelevel CRAcc 0 MajACC 0 Min ACC 0 CRREJ 1 MajREJ 1 Min REJ 1 project programof tests examination requirement test method inspectionresult decid e 1234 Dimensi onal inspecti on FPC shape 1.8mm±0.2 calliper 1.81.8 OK FPC shape 22mm±0.3 calliper 2221.9 OK project programof tests examination requirement test method Defect description CRMajMin判定 visual inspectio Silkscreen printing Thesilkscreen printingmustbe consistentwiththe productdrawing visual No abnormality 000 OK Ink Inkneedstobe complete,nobad injectionoil visual No abnormality 000OK Goldfinger Nooxidation,no scratching phenomenon visual No abnormality 000OK electrical specifica tion final judgment ☑OK□NG FORMIDNO：XYC-WF-PZ-001 ShenZhenXingYuanChuangTechnologyCo.,Ltd Address:1506,TangweiBusinessBuilding,FuhaiStreet,FuyongTown,BaoanDistrict,Shenzhen Tel：0755-82103639QQ：487580356Email：[email protected] PackingSpecification

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300068802 Page: 1 of 78 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2303000688AT Applicant: AX Technologies LLC Address of Applicant: 1441 Broadway 27th Floor New York 10018 United States Manufacturer: AX Technologies LLC Address of Manufacturer: 1441 Broadway 27th Floor New York 10018 United States Factory: AX Technologies LLC Address of Factory: 1441 Broadway 27th Floor New York 10018 United States Equipment Under Test (EUT): EUT Name: Fitness Tracker Model No.: JMTC4S01-G02, JMTC4S01-G03, JMTC4S01-G10, JMTC4S01-G12, JMTC4S01 ♣ ♣ Please refer to section 2 of this report which indicates which model was actual tested and which were electrically identical. Trade Mark: iTouch, Jillian Michaels, iTouch Active FCC ID: 2AJXA-JMFIT Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-03-19 Date of Test: 2023-03-21 to 2023-03-28 Date of Issue: 2023-04-04 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300068802 Page: 2 of 78 Revision Record Version Chapter Date Modifier Remark 01 2023-04-04 Original Authorized for issue by: Leo Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300068802 Page: 3 of 78 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300068802 Page: 4 of 78 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 6 4.3 Measurement Uncertainty ............................................................................................................ 6 4.4 Test Location ............................................................................................................................... 7 4.5 Test Facility .................................................................................................................................. 7 4.6 Deviation from Standards ............................................................................................................. 7 4.7 Abnormalities from Standard Conditions ....................................................................................... 7 5 Equipment List ................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ..........................................................................................11 6.1 Antenna Requirement .................................................................................................................11 6.1.1 Test Requirement: ..................................................................................................................11 6.1.2 Conclusion ..............................................................................................................................11 7 Radio Spectrum Matter Test Results ................................................................................................12 7.1 Conducted Peak Output Power ...................................................................................................12 7.1.1 E.U.T. Operation .....................................................................................................................13 7.1.2 Test Mode Description ............................................................................................................13 7.1.3 Test Setup Diagram ................................................................................................................13 7.1.4 Measurement Procedure and Data ....................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 1 of 3 Setup Photos for SZCR2303000688AT FCC ID: 2AJXA-JMFIT SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 2 of 3 Test Setup Photo Radiated Emissions which fall in the restricted bands Radiated Spurious Emissions Below 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 3 of 3 Radiated Spurious Emissions Above 1GHz - End of the Appendix -