2AJY5NOVA-TS2Face Camera

NOVA-TS2 User Guide Version 1.0, August 2021 About This Manual NOVA-TS2 is an advanced face recognition terminal that provides highly accurate face recognition in an embedded system with the built-in thermal sensor that provides elevated body temperature detection. This manual contains the descriptions and operational instructions for NOVA-TS2 device. It is intended and written for system administrators who are in charge of overall operation including installation and management. We recommend you familiarize yourself with this manual in order to make use of the product correctly and effectively. •The figures and screenshots in this guide are given for illustration purposes only and may differ from the actual product. •Due to continuous technological improvements, the guide may not contain the most updated information. For further information not covered in this guide, please contact us at [email protected]. Revision History VersionDateDescriptionNote 0.12021-06-181st draft www.cmi-tech.com (c) 2021, all rights reserved Page ii of 35 NOVA-TS2 User Guide, 1.0 August 2021 Conventions in This Manual The following symbols are used throughout this manual. Make sure that you fully understand the meaning of each symbol and follow the instructions accompanied. SymbolNameDescription WARNING Indicates information that should be followed with the utmost care. Failure to comply with a warning could cause severe damage to the equipment or injury to personnel. CAUTION Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. IMPORTANT Emphasizes essential information required for user success. NOTE Provides important supplemental information that might enhance users' understanding or alternative steps to accomplish their goals. TIP Provides optional information to help users be more successful in their tasks. NOVA-TS2 User Guide, 1.0 August 2021 Page iii of 35 www.cmi-tech.com (c) 2021, all rights reserved Safety Instructions Follow the safety instructions to use the product safely and prevent any risk of personal injury or damage to the product. WARNING Choosing Location •DO NOT expose the product to direct sunlight, excess heat, open flames, corrosive gasses, moisture, or dust. Doing so may cause electrical shock, electrical short, or fire. •DO NOT install the product near heaters, air conditioners, electrical fans, refrigerators, or water. Doing so may create the risk of a short circuit or fire caused by water or condensation that may come into contact with the product. •DO NOT install the product in an environment that is susceptible to explosion. Operation •DO NOT let any type of liquid, mists, or sprays get into the product. Doing so may cause electrical shock, electrical short, or product damage. •If smoke, odors or noise rise from the device, stop using the device immediately, disconnect the power cable, and contact our customer support. Maintenance •DO NOT attempt to dissemble, repair, or modify the device yourself. Opening or removing covers may expose you to electrical shock or other risks and may void your warranty. If the product does not work correctly, contact your dealer or our customer support. CAUTION Choosing Location •Keep the front side of the device away from strong ambient light, direct sunlight, or both. Sunlight, halogen lamps or other strong illumination may degrade the performance of the device, that is, increase in failure-to-capture rates or occasional authentication problem. •DO NOT install the product outdoors unless environmental factors such as water, temperature, or sunlight in the location are controlled by means of proper protection. •DO NOT expose the product to high electro-magnetic radiation. Device failure or performance degradation may occur caused by electro-magnetic interference. •DO NOT install the product next to devices that contain magnets or generate magnetic fields such as speakers. Device malfunction or performance degradation may occur caused by magnetic interference. www.cmi-tech.com (c) 2021, all rights reserved Page iv of 35 NOVA-TS2 User Guide, 1.0 August 2021 Installation •DO NOT install the product on a surface subject to vibration or physical shock. Doing so can cause damage to the product. •When you install the product on a wall, make sure that you secure the product with the provided fasteners. Dropping from the wall may cause damage to device casing, internal parts, or both. •DO NOT install the power supply cable in a high-traffic area where people pass by. Doing so may create a trip hazard and cause the cable to become worn or frayed. •Use only a power cord set complying with the national regulation of the countries intended for sale. •Use only the power adapter which is either provided or approved by CMITECH for the product to operate properly and safely. •DO NOT connect multiple devices to one power adapter. Overload on power adapter may cause over-heat or fire hazard. •DO NOT use any type of extension cord to connect the product to a power supply. Operation •DO NOT use any sharp tools when pressing the buttons to prevent damage to the touch screen from scratches or cuts. Maintenance •When cleaning the product, wipe the product with a soft and dry cloth. Do not apply water, benzene, alcohol, or spray cleaner. These may cause product failure or fire. NOVA-TS2 User Guide, 1.0 August 2021 Page v of 35 www.cmi-tech.com (c) 2021, all rights reserved Contents About This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Revision History. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Conventions in This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . …

Text truncated - open the document above for the full version.

CMITECH Co., Ltd. Aug 23, 2021 Applicant: CMITECH Co., Ltd. FCC ID: 2AJY5NOVA-TS2 To. Whom it may concern: We, Sena Technologies,Inc. declare that the two products differ in size depending on the FM function. Please refer to the table as below. Model nameDifference Basic model NOVA-TS2 Family model NOVA-TS2K Software function difference from basic model NovaFace-2 Removed thermal sensor camera NovaFace-2K Removed thermal sensor camera, Software function difference from basic model jung-hee Kim / Manager

CMITECH Co., Ltd. 5th Floor, 38, Burim-ro, 170 beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do,14055, Republic of Korea Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AJY5NOVA-TS2 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Schematics Operational Description Part List [NOVA-TS2] BLK [NOVA-TS2] SCH [NOVA-TS2] OpDes [NOVA-TS2] Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); Exhibit Type File Name External Photos Internal Photos Test Setup Photos Manual [NOVA-TS2] EXT Photo [NOVA-TS2] INT Photo [NOVA-TS2] Test Setup Photo [NOVA-TS2] Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. Sincerely, jung-hee Kim / Manager

CMITECH Co., Ltd. Aug 23, 2021 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Letter of Authorization We, the undersigned, hereby authorize Kenneth Kim of NCT Co.,Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: 2AJY5NOVA-TS2 including signing of all documents relating to these matters. Any and all acts carried out by Kenneth Kim of NCT Co.,Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from CMITECH Co., Ltd. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, jung-hee Kim / Manager CMITECH Co., Ltd.

USB Port

Label & Location

Internal RFID Antenna

Test Repot No.: NW2108-F001-1 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, Korea 18511 www.nct.re.kr TEL: +82-31-323-6070 FAX: +82-31-323-6071 Page 2 of 20 Table of contents 1. General Information -------------------------------------------------------------------------------- 2. Information’s about Test Item ------------------------------------------------------------------- 3. Test Report -------------------------------------------------------------------------------------------- 3.1 Test Summary ------------------------------------------------------------------------------------- 3.2 Test Report Version ----------------------------------------------------------------------------- 3.3 Transmitter Requirements 3.3.1 Antenna Requirement --------------------------------------------------------------------- 3.3.2 20 ㏈ Bandwidth --------------------------------------------------------------------------- 3.3.3 In-Band Emissions ------------------------------------------------------------------------- 3.3.4 Out-of-Band Emissions ------------------------------------------------------------------- 3.3.5 Frequency Stability ------------------------------------------------------------------------- 3.3.6 Conducted Emission ----------------------------------------------------------------------- APPENDIX APPENDIX I TEST SETUP ---------------------------------------------------------------------- APPENDIX II TEST EQUIPMENT USED FOR TESTS ---------------------------------- 3 3 5 5 6 7 8 9 12 15 16 17 19 Test Repot No.: NW2108-F001-1 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, Korea 18511 www.nct.re.kr TEL: +82-31-323-6070 FAX: +82-31-323-6071 Page 3 of 20 1. General Information’s 1.1 Test Performed Laboratory : NCT Co., Ltd. Address : 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, 18511, Korea Telephone : +82-31-323-6070 Facsimile : +82-31-323-6071 FCC Designation No. : KR0166 FCC Registration Number : 409631 2. Information’s about Test Item 2.1 Applicant Information Company name : CMITECH Co., Ltd. Address : 5th Floor, 38, Burim-ro, 170 beon-gil, Dongan-gu, Anyang-si, Gyeonggi- do,14055, Republic of Korea Telephone / Facsimile : +82- 70-8633-8459 / +82-31-624-4490 2.2 Equipment Under Test (EUT) description Test item particulars : Face Camera Model and/or type reference : NOVA-TS2 Additional model name : NOVA-TS2K, NovaFace-2, NovaFace-2K Serial number : Prototype Antenna type and gain : PCB Pattern Antenna Date (s) of performance of tests: : 2021-07-01 ~ 2021-07-09 Date of receipt of test item : 2021-06-17 EUT condition : Pre-production, not damaged Number of channel : 1 EUT Power Source : DC 15.0 V Type of Modulation : ASK Firmware version : 1.0 Hardware version : 1.0 Test software name(version) : - Test Repot No.: NW2108-F001-1 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, Korea 18511 www.nct.re.kr TEL: +82-31-323-6070 FAX: +82-31-323-6071 Page 4 of 20 2.3 Tested Frequency Test Mode Test frequency (㎒) Low frequency Middle frequency High frequency RFID - 13.56 - Test Repot No.: NW2108-F001-1 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, Korea 18511 www.nct.re.kr TEL: +82-31-323-6070 FAX: +82-31-323-6071 Page 5 of 20 3. Test Report 3.1 Test Summary Applied Test Items Clause Test Condition Result Antenna Requirement 15.203 - C 20 ㏈ Bandwidth 2.1049 Radiated C In-Band Emissions (13.553 – 13.567 ㎒) 15.225(a) C In-Band Emissions (13.410 – 13.553 ㎒, 13.567 – 13.710 ㎒) 15.225(b) C In-Band Emissions (13.110 – 13.410 ㎒, 13.710 – 14.010 ㎒) 15.225(c) C Out-of-Band Emissions 15.225(d) 15.209 C Frequency Stability 15.225(e) Temp & Humid Test Chamber C Conducted Emissions 15.207 AC Line Conducted NA note 2 Note 1: C=Complies NC=Not Complies NT=Not Tested NA=Not Applicable Note 2: This product is only using DC power. So, AC conducted emission test has not been performed. Note 3: This test item was performed in each axis and the worst case data was reported. The sample was tested according to the following specification: ANSI C63.10:2013 Compliance was determined by specification limits of the applicable standard according to customer requirements. Test Repot No.: NW2108-F001-1 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, Korea 18511 www.nct.re.kr TEL: +82-31-323-6070 FAX: +82-31-323-6071 Page 6 of 20 3.2 Test Report Version Test Report No. Date Description NW2108-F001 2021-08-03 Initial issue NW2108-F001-1 2021-08-25 Corrected FCC ID Test Repot No.: NW2108-F001-1 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, Korea 18511 www.nct.re.kr TEL: +82-31-323-6070 FAX: +82-31-323-6071 Page 7 of 20 3.3 Transmitter Requirements 3.3.1 Antenna Requirement Accoding to §15.203 An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. Accoding to §15.247(b)(4) e conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 ㏈i. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 ㏈i are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1), (b)(2), and (b)(3) of this section, as appropriate, by the amount in ㏈ that the directional gain of the antenna exceeds 6 ㏈i. 3.3.1.1 Result Complies (The transmitter has a PCB Pattern Antenna.) Test Repot No.: NW2108-F001-1 211-71, Geumgok-ro, Hwaseong-si, Gyeonggi-do, Korea 18511 www.nct.re.kr TEL: +82-31-323-6070 FAX: +82-31-323-6071 Page 8 of 20 3.3.2 20 ㏈ Bandwidth 3.3.2.1 Test Setup Refer to the APPENDIX I. 3.3.2.2 Limit N/A 3.3.2.…

Text truncated - open the document above for the full version.

Below 30 MHz Below 1 GHz