2AK4CPP2OUSPetcube Play 2

SAFETY INSTRUCTIONS Fo r more information about safety and handling, please s ee https://petcube.com/support/play 2/user-guide/ To avoid injury or harm, read all safety information and operating instructions prior to using Petcube Play 2. 1. Don't drop, hit, or shake your Petcube Play 2. 2. Don't stain, scratch, or otherwise damage the front camera glass. 3. Don't expose to liquid, moisture, dust, excessive heat, or open flames. 4. To avoid overheating, don't leave Petcube Play 2 in direct sunlight. 5. Petcube Play 2 should not be used by minors without supervision from an adult. 6. Protect the power cord from being walked on, pinched, or chewed on by pets. 7. The socket-outlet shall be installed near the equipment and shall be easily accessible. 8. Maximum ambient temperature around the adapter must not exceed 40 ° C. 9. The adapter is used for office machines and data processing appliances. It is certified according to the relevant safety standards UL 62368-1, CSA 022.2 No. 62368-1. 10. The output power taken from the supply must not exceed the rating given on the adapter. 11. The adapter is not intended to be repaired by service personnel in case of failure or component defect (unit can be thrown away). 12. The disconnection from line voltage is made by main p lu g . The frequency bands in which the radio equipment can operate -2412.0 - 2462.0 MHz. 6 7 CONTACT PRODUCT INFO For any assistance with the device, please contact us directly at: [email protected] We'll resolve any issue ASAP. Pet parents'experience is our top priority. Share your feedback Join the Petcube pack @petcube #petcube ＠望f 。 Petcube user guide The explanations provided in this guide are for informational purposes only and may be modified. The latest version of this guide can be found at http s://petcube.com/support/play 2/user-guide/ Software Your Petcube Play 2 connects to Petcube, Inc. copyrighted software to control its operation. Warranty When Petcube Play 2 is purchased new through Petcube authorized resellers, it is warranted against defects in materials and workmanship under normal use. Full terms can be found at https:/ /petcube.com/docs/warranty / h ttps:/ /petcube.com/ care/ Terms of use For more information please visit https://petcube.com/docs/terms-of-use/ FCC Warning Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two c onditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should 8 9 be installed and operated with minimum distance of 20 cm between the radiator & your body. Thi s transm itter must not be co-located or operating in conjunction with any other antenna or transmit ter. Only use the powe r supply provided. IS EDC RSS Warning. Canadian Complian ce Stateme nt This device comp lies with ISEDC license-exempt RSS standard(s). Operation is subject to the f ollowing two conditions: (1 ) this device may not cause i nterference, and (2) this device must ac cept any interference, including interference that may cause undesired opera tion of the device. IS EDC Radiation Exposure Statement This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunct ion with any other antenna or transmitter. This equipment should be installed a nd operated with minimum distance 20 cm between the radiator & your body. 10 Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Declaration of Conformity Hereby, Petcube Inc. declares that this Petcube Play 2 is in compliance with Directive 2014/53/EU and Radio Equipment Regulation 2017. The full text of the declaration of conformity is available at the following intern et address: hhttttppss::////ppeettccuubbee..ccoomm//ddooccss//ddeeccllaarraattiioonn--ooff--ccoonnffoorrmmiittyy-- ppeettccuubbee--ppllaayy 22 ce matériel est conforme aux limites de dose d'exposition aux rayonnements, CNR-102 énoncée dans un autre environne- ment.cette eqipment devrait être installé et exploité avec distance minimale de 20 entre le radiateur et votre corps. 11

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Petcube, Inc. Address 251 Little Falls Drive, Wilmington, DE 19808, United States Grantee Code 2AK4C FCC ID 2AK4CPP2OUS Authorized Contact Name Andrii Kulbaba Contact Email [email protected] Contact Phone +1 415 864 9171 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Petcube, Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Petcube, Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 2023-08-21 Print Name: Andrii Kulbaba Title: Chief Design Officer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-08-21 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Petcube, Inc. Company Name: Petcube, Inc. Grantee Code: 2AK4C FRN: 0026238840 Contact Name: Andrii Kulbaba Contact Name: Andrii Kulbaba Address: 251 Little Falls Drive Address: 251 Little Falls Drive City/Province/Zip: Wilmington, Delaware 19808, United States City/Province/Zip: Wilmington, Delaware 19808, United States Telephone: +1 415 864 9171 Telephone: +1 415 864 9171 Fax: N/A Fax: N/A Email: [email protected] Email: [email protected] ATTN: Director of Certification: We, < Petcube, Inc.> and < Petcube, Inc.> understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < Petcube, Inc.> and < Petcube, Inc.> acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Andrii Kulbaba Name (Printed): Andrii Kulbaba Title: Chief Design Officer Title: Chief Design Officer Signature: Signature:

Petcube, Inc. Date: 2023-08-21 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AK4CPP2OUS To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Petcube, Inc. This authorization is valid until further written notice from the applicant. Name (Printed): Andrii Kulbaba Title: Chief Design Officer Signature: On behalf of Company: Petcube, Inc. Telephone: +1 415 864 9171

Petcube, Inc. 2023-08-21 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Petcube, Inc. 251 Little Falls Drive, Wilmington, DE 19808, United States Regarding: Confidentiality Request regarding application for FCC ID: 2AK4CPP2OUS LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Signature: Printed Name: Andrii Kulbaba Title: Chief Design Officer Company Name: Petcube, Inc.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 11 Internal Photos for SHCR2308001647AT Test Model No.: PP20US SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 11 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 11 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 11 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 5 of 11 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 6 of 11 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 7 of 11 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 8 of 11 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 9 of 11 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 10 of 11 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 11 of 11

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230800164702 Page: 1 of 13 Parlam Zhan Laboratory Manager 1 Cover Page RF Exposure Evaluation Report Application No.: SHCR2308001647AT FCC ID: 2AK4CPP2OUS IC: 20191-PP2OUS Applicant: PETCUBE, Inc. Address of Applicant: 251 Little Falls Drive, Wilmington DE 19808, United States Manufacturer: PETCUBE, Inc. Address of Manufacturer: 251 Little Falls Drive, Wilmington DE 19808, United States Factory: Hangzhou Meari Technology Co., Ltd. Address of Factory: Room 604-605,Building 1,No.768 Jianghong Road,Changhe Street,Binjiang District,Hangzhou,zhejiang,China Equipment Under Test (EUT): EUT Name: Petcube Play 2 Model No.: HVIN: PP20US PP2OUS Trade Mark: Petcube Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 RSS-102 Issue 5 Amendment 1 (February 2, 2021) Date of Receipt: 2023-08-01 Date of Test: 2023-08-03 to 2023-08-13 Date of Issue: 2023-08-15 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230800164702 Page: 2 of 13 Revision Record Version Description Date Remark 00 Original 2023-08-15 / Authorized for issue by: Micheal Niu /Project Engineer Parlam Zhan /Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230800164702 Page: 3 of 13 2 Contents Page 1 Cover Page ........................................................................................................................................ 1 2 Contents ............................................................................................................................................ 3 3 General Information .......................................................................................................................... 4 3.1 General Description of E.U.T. .................................................................................................... 4 3.2 Technical Specifications ............................................................................................................. 4 3.3 Separation Distance ................................................................................................................... 5 3.4 Test Location .............................................................................................................................. 6 3.5 Test Facility ................................................................................................................................ 6 4 RF Exposure Test Exemptions ........................................................................................................ 7 4.1 RF Exposure Test Exemptions for single RF sources ............................................................... 7 4.2 RF Exposure Test Exemptions for Simultaneous Transmission ................................................ 9 4.3 IC Radiofrequency radiation exposure limits: .......................................................................... 11 5 Measurement and Calculation ....................................................................................................... 12 5.1 Maximum transmit power ......................................................................................................... 12 5.2 RF Exposure Calculation ......................................................................................................... 13 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230800164702 Page: 4 of 13 3 General Information 3.1 General Description of E.U.T. Power supply: AC 100-240V,50/60Hz Adapter model:TPA-46B050100UU Input:AC 100-240V50/60Hz Output:DC 5V,1000mA S/N: 112940898 Firmware Version: 6.2.110.1183 3.2 Technical Specifications Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz;802.11n(HT40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK);802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20):11;802.11n(HT40):7 Channel Spacing: 5MHz Antenna Type: PCB Antenna Antenna Gain: 3.48dBi(Provided by the manufacturer) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230800164702 Page: 5 of 13 3.3 Separation Distance Separation distance between the antenna to person (R): ＞20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. R has been stated in user manual. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230800164702 Page: 6 of 13 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. E&E Lab 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China Tel: +86 21 6191 5666 Fax: +86 21 6191 5678 No tests were sub-contracted. Note: 1. SGS is not responsible for wrong test results due to incorrect information (e.g. max. clock frequency, highest internal frequency, antenna gain, cable loss, etc ) is provided by the applicant. (if applicable). 2. SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (if applicable). 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6332.01) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. is accredited by the American Association for Laboratory Accreditation(A2LA). • FCC (Designation Number: CN1301) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been recognized as an accredited testing laboratory. • ISED (CAB Identifier: CN0020) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. EMC Laboratory …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230800164701 Page: 1 of 140 Parlam Zhan Laboratory Manager TEST REPORT Application No.: SHCR2308001647AT FCC ID: 2AK4CPP2OUS IC: 20191-PP2OUS Applicant: PETCUBE, Inc. Address of Applicant: 251 Little Falls Drive, Wilmington DE 19808, United States Manufacturer: PETCUBE, Inc. Address of Manufacturer: 251 Little Falls Drive, Wilmington DE 19808, United States Factory: Hangzhou Meari Technology Co., Ltd. Address of Factory: Room 604-605,Building 1,No.768 Jianghong Road,Changhe Street,Binjiang District,Hangzhou,zhejiang,China Equipment Under Test (EUT): EUT Name: Petcube Play 2 Model No.: HVIN: PP20US PP2OUS Trade Mark: Petcube Standard(s) : 47 CFR Part 15, Subpart C 15.247 RSS-247 Issue 2, February 2017 RSS-Gen Issue 5 Amendment 2 (February 2021) Date of Receipt: 2023-08-01 Date of Test: 2023-08-03 to 2023-08-13 Date of Issue: 2023-08-15 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230800164701 Page: 2 of 140 Revision Record Version Description Date Remark 00 Original 2023-08-15 / Authorized for issue by: Micheal Niu /Project Engineer Parlam Zhan /Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230800164701 Page: 3 of 140 2 Test Summary Radio Spectrum Technical Requirement Item FCC Requirement IC Requirement Method Result Antenna Requirement 47 CFR Part 15, Subpart C 15.203 & 15.247(c) RSS-Gen Clause 6.8 N/A Customer Declaration N/A: Not applicable Radio Spectrum Matter Part Item FCC Requirement IC Requirement Method Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.207 RSS-Gen Clause 8.8 ANSI C63.10 (2013) Section 6.2 Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247a(2) RSS-247 Clause 5.2(a) ANSI C63.10 (2013) Section 11.8.1 Pass Conducted Average Output Power 47 CFR Part 15, Subpart C 15.247(b)(3) RSS-247 Clause 5.4(d) ANSI C63.10 (2013) Section 11.9.2 Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247(e) RSS-247 Clause 5.2(b) ANSI C63.10 (2013) Section 11.10.2 Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247(d) RSS-247 Clause 5.5 ANSI C63.10 (2013) Section 11.13.3.2 Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247(d) RSS-247 Clause 5.5 ANSI C63.10 (2013) Section 11.11 Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.209 & 15.247(d) RSS-247 Section 3.3 & RSS-Gen Section 8.9 ANSI C63.10 (2013) Section 6.10.5 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.209 & 15.247(d) RSS-247 Section 3.3 & RSS-Gen Section 8.9 ANSI C63.10 (2013) Section 6.4,6.5,6.6 Pass 99% Bandwidth - RSS-Gen Section 6.7 ANSI C63.10 Section 6.9.3 Pass SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230800164701 Page: 4 of 140 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 5 4.1 Details of E.U.T. ................................................................................................................................. 5 4.2 Power level setting using in test: ........................................................................................................ 5 4.3 Environment Parameter ..................................................................................................................... 5 4.4 Description of Support Units .............................................................................................................. 6 4.5 Measurement Uncertainty .................................................................................................................. 6 4.6 Test Location ...................................................................................................................................... 7 4.7 Test Facility ........................................................................................................................................ 7 4.8 Deviation from Standards ................................................................................................................... 7 4.9 Abnormalities from Standard Conditions ........................................................................................... 7 5 Equipment List .......................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ............................................................................................. 10 6.1 Antenna Requirement ...................................................................................................................... 10 7 Radio Spectrum Matter Test Results .................................................................................................... 11 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) ............................................................. 11 7.2 Conducted Peak Output Power........................................................................................................ 15 7.3 Minimum 6dB Bandwidth ................................................................................................................. 17 7.4 Power Spectrum Density ................................................…

Text truncated - open the document above for the full version.

上海杰盛康通信工程有限公司 Shanghai Jesoncom Communication Engineering Co., Ltd Antenna Data Sheet Manufacturer: Shanghai Jesoncom Communication Engineering Co., Ltd Address: Building 2, No. 358 Liuyuan Road, Baoshan Industrial Park, Shanghai Postal Code: 200444 Tel: 021-66276925/29/35 Fax: 021-66276923 E-mail: [email protected] Website: www.shjesoncom.com 上海杰盛康通信工程有限公司 Shanghai Jesoncom Communication Engineering Co., Ltd 1. Testing Environment 上海杰盛康通信工程有限公司 Shanghai Jesoncom Communication Engineering Co., Ltd 2. Antenna Photo 上海杰盛康通信工程有限公司 Shanghai Jesoncom Communication Engineering Co., Ltd 3. Passive efficiency Frequency (MHz) Gain (dBi) Efficiency (%) 24001.9544.36 24102.4248.38 24202.2548.76 24302.5150.42 24402.9950.96 24503.0152.30 24602.5950.26 24703.4854.90 24803.2554.59 24902.5250.37 25002.7449.43 上海杰盛康通信工程有限公司 Shanghai Jesoncom Communication Engineering Co., Ltd 4. Return loss 5. Smith 6. VSWR 上海杰盛康通信工程有限公司 Shanghai Jesoncom Communication Engineering Co., Ltd 7. Radiation Pattern E1 上海杰盛康通信工程有限公司 Shanghai Jesoncom Communication Engineering Co., Ltd E2 上海杰盛康通信工程有限公司 Shanghai Jesoncom Communication Engineering Co., Ltd H END

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 4 Appendix Photographs of Test Setup for SHCR2308001647AT Test Model No.: PP20US SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 4 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) RF Conducted Test SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 4 RF Radiated Test (Below 1GHz) RF Radiated Test (Above 1GHz) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 4 Zoom