2AKG3-EW018smart lamp

18 Can’t connect? Need help? WE CAN HELP DO NOT RETURN THIS PRODUCT TO THE STORE support.mygeeni.com (888)232-3143 Toll-free or tap ‘support‘ for help in the Geeni app. SMART WI-FI LED STRIP START GUIDE MI-EW012_Manual_011521.indd Spread 1 of 12 - Pages(18, 1)MI-EW012_Manual_011521.indd Spread 1 of 12 - Pages(18, 1)1/15/21 4:21 PM1/15/21 4:21 PM Thank you for purchasing your MERKURY smart home product. Get started using your new devices by downloading Geeni, one convenient app that manages everything straight from your phone or tablet. Easily connect to your home Wi-Fi, and control multiple devices from the touch of your fingertips. 17 MI-EW012_Manual_011521.indd Spread 2 of 12 - Pages(2, 17)MI-EW012_Manual_011521.indd Spread 2 of 12 - Pages(2, 17)1/15/21 4:21 PM1/15/21 4:21 PM 16 01 02 04 05 08 Download & Register Prepare Connect (Auto Discovery) Connect (Manual Connection) Questions, Troubleshooting, Notices Contents Start Guide 11 13 Google Assistant Amazon Alexa Voice Control Guide MI-EW012_Manual_011521.indd Spread 3 of 12 - Pages(16, 3)MI-EW012_Manual_011521.indd Spread 3 of 12 - Pages(16, 3)1/15/21 4:21 PM1/15/21 4:21 PM FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 15 MI-EW012_Manual_011521.indd Spread 4 of 12 - Pages(4, 15)MI-EW012_Manual_011521.indd Spread 4 of 12 - Pages(4, 15)1/15/21 4:21 PM1/15/21 4:21 PM 14 You can rename your devices in the Geeni app, and Alexa will refer to them by the same name. So if you rename a smart bulb to “Living Room“ or a nickname like “Blossom,“ then Alexa will use that same name later on. Alternatively, you can create an Alexa group, like “Bedroom“ or “Downstairs,“ and add the device to the group. Alexa will recognize the group name in the Alexa app, or the device name in the Geeni app. More information is available at: http://tinyurl.com/alexa-smart-home-groups Amazon Alexa 04 Choose “Discover Devices.“ After a few seconds your MERKURY devices will be displayed under Smart Home in the Alexa app. 03 Authorize your account with Smart Home Skills using the username and password from your Geeni app. Important Information: The weather resistant IP65 rating only protects the LED strip from splashes in any direction. DO NOT IMMERSE IN WATER. WARNING: The LED strip must be unplugged when making any modifications to the device. Electrical currents are dangerous and may cause electrical shock, injury, or death (in some cases) Support: If you encounter any issues, please contact us at support.mygeeni.com for help. To explore our full selection of products, visit us at: www.mygeeni.com (888) 232-3143 Toll-free © 2021 Merkury Innovations • 45 Broadway 3rd FL, New York NY 10006. The illustrated product and specifications may differ slightly from those supplied. Geeni is a trademark of Merkury Innovations LLC. iPhone, Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google, Google Play, and related marks and logos are trademarks of Google LLC. iOS is a registered trademark of Cisco in the U.S. and other countries and is used under license. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. All other trademarks and trade names are those of their respective owners. Made in China MI-EW012_Manual_011521.indd Spread 5 of 12 - Pages(14, 5)MI-EW012_Manual_011521.indd Spread 5 of 12 - Pages(14, 5)1/15/21 4:21 PM1/15/21 4:21 PM Smart Wi-Fi LED Strip Anchor Mounts Wi-Fi Controller What’s in the Box START GUIDE Get Ready Know your Wi-Fi network and password Make sure you’re connecting to a 2.4GHz Wi-Fi network (Geeni can’t connect to 5GHz networks) Make sure your mobile device is running iOS ® 9 or higher or Android™ 5.0 or higher 2.4GHz iOS 9 Android 5.0 Power Adapter User Manual 1313 To control your MERKURY smart bulbs, plugs or surge protectors, just ask Alexa. Make sure your devices are already set up using the Geeni app. “Alexa, discover my devices.“ “Alexa, turn on the bedroom light.“ “Alexa, set the bedroom light to orange.“ “Alexa, turn off the coffee machine.“ “Alexa, set the living room to 50%.“ “Alexa, dim porch light.“ *Some commands require compatible devices. Things you can say*: 01 02 Open the Alexa app and go to Skills in the menu. Search for Geeni then tap Enable. MI-EW012_Manual_011521.indd Spread 6 of 12 - Pages(6, 13)MI-EW012_Manual_011521.indd S…

Text truncated - open the document above for the full version.

ShenzhenJBTSmartLightingCo.,LTD ModelDifference Productdescription:smartlamp Modelname:GN-EW018-999, IH-EW018-999,GNC-EW018-999,MI-EW018-999W, MIC-EW018-999W,G2212005,G2212006 TradeName:N/A FCCID:2AKG3-EW018 AllthemodelarethesamecircuitandRFmodule,onlyformodelname. Regards Sincerely Client’ssignature: Client’sname/title:GuangyinLi(N/A) Contactinformation/address:No.7Building,No.1FurongRoad,FurongIndustrial Park,ShajingTown,BaoanDistrict,Shenzhen,China

C5266091_X8_Ed.1 1/1 LetterofAuthorization <ShenzhenJBTSmartLightingCo.,LTD> Company:ShenzhenJBTSmartLightingCo.,LTD Address:No.7Building,No.1FurongRoad,FurongIndustrialPark,Shajing Town,BaoanDistrict,Shenzhen,China ProductName:smartlamp ModelNumber:GN-EW018-999, IH-EW018-999,GNC-EW018-999,MI-EW018-999W, MIC-EW018-999W,G2212005,G2212006 FCCIdentifier:2AKG3-EW018 WeauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdelCarme,s/n, 08193Bellaterra,Spain,toactonourbehalfonallmattersconcerningthe abovenamedequipment. AnyindividualwithinLGAITechnologicalCenterS.A.isauthorizedtoactonour behalfandtakeactionontheapplication. WedeclarethatauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdel Carme,s/n,08193Bellaterra,Spain,isallowedtoforwardallinformation relatedtotheapprovalprojecttotheFederalCommunicationCommissionand todiscussanyissuesconcerningtheapprovalapplication.Anyandallacts carriedoutbyLGAITechnologicalCenterS.A.onourbehalfshallhavethe sameeffectasactsofourown. Name:GuangyinLiDate:2021-07-27 Title:N/A Signatureofapplicant:

C5266091_X10_Ed.1 1/1 <ShenzhenJBTSmartLightingCo.,LTD> OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:2021-07-27 Subject:RequestforConfidentiality FCCID:2AKG3-EW018 ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo BlockDiagram Schematics TestReportNoNo TestSetupPhotosNo User’sManual InternalPhotos PartsList/TuneUp RFExposureInfo OperationalDescription CoverLetter(s)NoNo SDRSoftware/SecurityInfoNo Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. Sincerely, Signature: Name:GuangyinLi Title:N/A

EUT PHOTO(External Photos)

Labelandlabellocation smartlamp FCCID:2AKG3-EW018

EUT PHOTO(Internal Photos) WIFI ANT ※※※※※※※※※※ END OF REPORT

FCC ID:2AKG3-EW018 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation 2.4G WIFI mode Channel Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b 9.108 8.14 0.001620 1.0 PASS 802.11g 8.372 6.87 0.001367 1.0 PASS 802.11n(HT20) 8.520 7.11 0.001415 1.0 PASS 802.11n(HT40) 7.734 5.93 0.001181 1.0 PASS Remark: antenna gain=0dBi

ProjectNo.:ZKT-2107133361E Page 1 of 56 FCCTESTREPORT FCCID:2AKG3-EW018 ReportNumber...................................:ZKT-2107133361E DateofTest.......................................................:Jul.13,2021toJul.23,2021 Dateofissue.........................................:Jul.23,2021 Totalnumberofpages .......................... 56 TestResult ............................................ : PASS TestingLaboratory............................: ShenzhenZKTTechnologyCo.,Ltd. Address...............................................: 1/F,No.101,BuildingB,No.6,TangweiCommunityIndustrial Avenue,FuhaiStreet,Bao'anDistrict,Shenzhen,China Applicant'sname.............................: ShenzhenJBTSmartLightingCo.,LTD Address...............................................: No.7Building,No.1FurongRoad,Furong,IndustrialPark,Shajing Town,BaoanDistrict,Shenzhen,China Manufacturer'sname ...................... : ShenzhenJBTSmartLightingCo.,LTD Address...............................................: No.7Building,No.1FurongRoad,Furong,IndustrialPark,Shajing Town,BaoanDistrict,Shenzhen,China Testspecification: Standard................................................: FCCCFRTitle47Part15SubpartCSection15.247 ANSIC63.10:2013 Testprocedure ..................................... : / Non-standardtestmethod ................ :N/A TestReportFormNo........................: TRF-EL-110_V0 TestReportForm(s)Originator.....: ZKTTesting MasterTRF........................................: Dated:2020-01-06 ThisdevicedescribedabovehasbeentestedbyZKT,andthetestresultsshowthattheequipmentunder test(EUT)isincompliancewiththeFCCrequirements.Anditisapplicableonlytothetestedsample identifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofZKT,thisdocumentmay bealteredorrevisedbyZKT,personalonly,andshallbenotedintherevisionofthedocument. Productname.....................................:smartlamp Trademark ........................................... : N/A Model/Typereference.........................:GN-EW018-999, IH-EW018-999,GNC-EW018-999,MI-EW018-999W, MIC-EW018-999W,G2212005,G2212006 Ratings..................................................:Input:DC12V ProjectNo.:ZKT-2107133361E Page 2 of 56 Testingprocedureandtestinglocation: TestingLaboratory ....................................... :ShenzhenZKTTechnologyCo.,Ltd. Address ............................................................ :1/F,No.101,BuildingB,No.6,TangweiCommunity IndustrialAvenue,FuhaiStreet,Bao'anDistrict, Shenzhen,China AlenHe Testedby(name+signature).......................: JoeLiu Reviewer(name+signature).......................: LakeXie Approved(name+signature) ....................... : ProjectNo.:ZKT-2107133361E Page 3 of 56 TableofContents Page 1.VERSION5 2.SUMMARYOFTESTRESULTS6 2.1TESTFACILITY7 2.2MEASUREMENTUNCERTAINTY7 3.GENERALINFORMATION8 3.1GENERALDESCRIPTIONOFEUT8 3.2DESCRIPTIONOFTESTMODES9 3.3BLOCKDIGRAMSHOWINGTHECONFIGURATIONOFSYSTEMTESTED9 3.4DESCRIPTIONOFSUPPORTUNITS(CONDUCTEDMODE)10 3.5EQUIPMENTSLISTFORALLTESTITEMS11 4.EMCEMISSIONTEST12 4.1CONDUCTEDEMISSIONMEASUREMENT12 4.1.1POWERLINECONDUCTEDEMISSIONLIMITS12 4.1.2TESTPROCEDURE12 4.1.3DEVIATIONFROMTESTSTANDARD12 4.1.4TESTSETUP13 4.1.5EUTOPERATINGCONDITIONS13 4.1.6TESTRESULT14 4.2RADIATEDEMISSIONMEASUREMENT16 4.2.1RADIATEDEMISSIONLIMITS16 4.2.2TESTPROCEDURE16 4.2.3DEVIATIONFROMTESTSTANDARD17 4.2.4TESTSETUP17 4.2.5EUTOPERATINGCONDITIONS18 4.2.6TESTRESULTS18 5.RADIATEDBANDEMISSIONMEASUREMENT29 5.1TESTREQUIREMENT:29 5.2TESTPROCEDURE29 5.3DEVIATIONFROMTESTSTANDARD29 5.4TESTSETUP30 5.5EUTOPERATINGCONDITIONS30 5.6TESTRESULT31 6.POWERSPECTRALDENSITYTEST33 6.1APPLIEDPROCEDURES/LIMIT33 6.2TESTPROCEDURE33 6.3DEVIATIONFROMSTANDARD33 6.4TESTSETUP33 6.5EUTOPERATIONCONDITIONS33 ProjectNo.:ZKT-2107133361E Page 4 of 56 6.6TESTRESULT34 7.CHANNELBANDWIDTH&99%OCCUPYBANDWIDTH42 7.1APPLIEDPROCEDURES/LIMIT42 7.2TESTPROCEDURE42 7.3DEVIATIONFROMSTANDARD42 7.4TESTSETUP42 7.5EUTOPERATIONCONDITIONS42 7.6TESTRESULT43 8.PEAKOUTPUTPOWERTEST46 8.1APPLIEDPROCEDURES/LIMIT46 8.2TESTPROCEDURE46 8.3DEVIATIONFROMSTANDARD46 8.4TESTSETUP46 8.5EUTOPERATIONCONDITIONS46 8.6TESTRESULT47 9.CONDUCTEDBANDEDGEANDSPURIOUSEMISSION48 9.1APPLICABLESTANDARD48 9.2TESTPROCEDURE48 9.3DEVIATIONFROMSTANDARD48 9.4TESTSETUP48 9.5EUTOPERATIONCONDITIONS48 9.6TESTRESULTS48 10.ANTENNAREQUIREMENT55 11.TESTSETUPPHOTO56 12.EUTCONSTRUCTIONALDETAILS56 ProjectNo.:ZKT-2107133361E Page 5 of 56 1.VERSION ReportNo.VersionDescriptionApproved ZKT-2107133361ERev.01InitialissueofreportJul.23,2021 ProjectNo.:ZKT-2107133361E Page 6 of 56 2.SUMMARYOFTESTRESULTS Testproceduresaccordingtothetechnicalstandards: FCCPart15(15.247),SubpartC Standard Section TestItemResultRemark FCCpart15.203/15.247 (c) AntennarequirementPASS FCCpart15.207ACPowerLineConductedEmissionPASS FCCpart15.247(b)(3)ConductedPeakOutputPowerPASS FCCpart15.247(a)(2)ChannelBandwidth&99%OCBPASS FCCpart15.247(e)PowerSpectralDensityPASS FCCpart15.247(d)BandEdgePASS FCCpart15.205/15.209SpuriousEmissionPASS NOTE: (1)”N/A”denotestestisnotapplicableinthisTestReport ProjectNo.:ZKT-2107133361E Page 7 of 56 2.1TESTFACILITY ShenzhenZKTTechnologyCo.,Ltd. Add.:1/F,No.101,BuildingB,No.6,TangweiCommunityIndustrialAvenue,FuhaiStreet,Bao'an District,Shenzhen,China FCCTestFirmRegistrationNumber:692225 DesignationNumber:CN1299 ICRegisteredNo.:27033 2.2MEASUREMENTUNCERTAINTY Thereporteduncertaintyofmeasurementy±U ， whereexpendeduncertaintyUisbasedonastandard uncertaintymultipliedbyacoveragefactorofk=2 ， providingalevelofconfidenceofapproximately95 % 。 No.ItemUncertainty 1ConductedEmissionTest±1.38dB 2RFpowerconducted±0.16dB 3Spuriousemissionsconducted±0.21dB 4Allemissionsradiated(<1G)±4.68dB 5Allemissionsradiated(>1G)±4.89dB 6Temperature±0.5°C 7Humidity±2% ProjectNo.:ZKT-2107133361E Page 8 of 56 3.GENERALINFORMATION 3.1GENERALDESCRIPTIONOFEUT ProductName: smartlamp ModelNo.: GN-EW018-999, IH-EW018-999,GNC-EW018-999,MI-EW018-999W, MIC-EW018-999W,G2212005,G2212006 ModelDifferent.: Onlyfordifferentmodelname.…

Text truncated - open the document above for the full version.

ProjectNo.:ZKT-2107133361E Page 41 of 56 TXCH06 TXCH09 ProjectNo.:ZKT-2107133361E Page 42 of 56 7.CHANNELBANDWIDTH&99%OCCUPYBANDWIDTH TestRequirement:FCCPart15CSection15.247(a)(2) TestMethod:KDB558074D0115.247MeasGuidancev05r02 7.1APPLIEDPROCEDURES/LIMIT FCCPart15(15.247),SubpartC SectionTestItemLimit FrequencyRange (MHz) Result 15.247(a)(2)Bandwidth >=500KHz (6dBbandwidth) 2400-2483.5PASS 7.2TESTPROCEDURE 1.SetRBW=100kHz. 2.Setthevideobandwidth(VBW)≥3xRBW. 3.Detector=Peak. 4.Tracemode=maxhold. 5.Sweep=autocouple. 6.Allowthetracetostabilize. 7.Measurethemaximumwidthoftheemissionthatisconstrainedbythefrequenciesassociatedwiththe twooutermostamplitudepoints(upperandlowerfrequencies)thatareattenuatedby6dBrelativetothe maximumlevelmeasuredinthefundamentalemission. 7.3DEVIATIONFROMSTANDARD Nodeviation. 7.4TESTSETUP 7.5EUTOPERATIONCONDITIONS TheEUTtestedsystemwasconfiguredasthestatementsof2.4Unlessotherwiseaspecialoperating conditionisspecifiedinthefollowsduringthetesting. ProjectNo.:ZKT-2107133361E Page 43 of 56 7.6TESTRESULT Temperature ： 26°C RelativeHumidity ： 54% Pressure： 101kPa TestVoltage： DC12V TestMode： TXbMode TestCH -6dBOccupyBandwidth(MHz) 802.11b802.11g802.11n(HT20) 802.11n(HT 40) Limit(KHz)Result Lowest7.55015.10513.74732.611 >500Pass Middle8.38115.00814.83433.736 Highest7.62314.16315.11233.817 TestCH 99%OccupyBandwidth(MHz) Result 802.11b802.11g802.11n(HT20)802.11n(HT40) Lowest12.62016.34717.52535.936 PassMiddle12.52916.32117.53435.808 Highest12.54716.34817.53535.813 ProjectNo.:ZKT-2107133361E Page 44 of 56 Testplotasfollows: 802.11b802.11g Lowestchannel Middlechannel Highestchannel ProjectNo.:ZKT-2107133361E Page 45 of 56 802.11n20802.11n40 Lowestchannel Middlechannel Highestchannel ProjectNo.:ZKT-2107133361E Page 46 of 56 8.PEAKOUTPUTPOWERTEST TestRequirement:FCCPart15CSection15.247(b)(3) TestMethod:KDB558074D0115.247MeasGuidancev05r02 8.1APPLIEDPROCEDURES/LIMIT FCCPart15(15.247),SubpartC SectionTestItemLimit FrequencyRange (MHz) Result 15.247(b)(3) PeakOutput Power 1wattor30dBm2400-2483.5PASS 8.2TESTPROCEDURE a. TheEUTwasdirectlyconnectedtothePowermeter 8.3DEVIATIONFROMSTANDARD Nodeviation. 8.4TESTSETUP 8.5EUTOPERATIONCONDITIONS TheEUTtestedsystemwasconfiguredasthestatementsof2.4Unlessotherwiseaspecialoperating conditionisspecifiedinthefollowsduringthetesting. ProjectNo.:ZKT-2107133361E Page 47 of 56 8.6TESTRESULT Temperature： 26°C RelativeHumidity： 54% Pressure： 101kPa TestVoltage： DC12V TestCH PeakOutputPower(dBm) Limit(dBm)Result 802.11b802.11g802.11n(HT20)802.11n(HT40) Lowest9.1028.3728.520 7.734 30.00Pass Middle9.1008.2858.427 7.652 Highest9.1088.2558.3867.639 ProjectNo.:ZKT-2107133361E Page 48 of 56 9.CONDUCTEDBANDEDGEANDSPURIOUSEMISSION TestRequirement:FCCPart15CSection15.247(d) TestMethod:KDB558074D0115.247MeasGuidancev05r02 9.1APPLICABLESTANDARD inany100kHzbandwidthoutsidethefrequencybandsinwhichthespreadspectrumintentionalradiatorin operating,theradiofrequencypowerthatisproducedbytheintentionalradiatorshallbeatleast20dBbelow thatinthe100kHzbandwidthwithinthebandthatcontainsthehighestlevelofthedesiredpower,Inaddition, radiatedemissionswhichfallintherestrictedbands,asdefinedin§15.205(a),mustalsocomplywiththe radiatedemissionlimitsspecifiedin15.209(a). 9.2TESTPROCEDURE Usingthefollowingspectrumanalyzersetting: A)SettheRBW=100KHz. B)SettheVBW=300KHz. C)Sweeptime=autocouple. D)Detectorfunction=peak. E)Tracemode=maxhold. F)Allowtracetofullystabilize. 9.3DEVIATIONFROMSTANDARD Nodeviation. 9.4TESTSETUP 9.5EUTOPERATIONCONDITIONS TheEUTtestedsystemwasconfiguredasthestatementsof2.4Unlessotherwiseaspecialoperating conditionisspecifiedinthefollowsduringthetesting. 9.6TESTRESULTS ProjectNo.:ZKT-2107133361E Page 49 of 56 Testplotasfollows: Testmode:802.11b LowestchannelHighestchannel Testmode:802.11g LowestchannelHighestchannel ProjectNo.:ZKT-2107133361E Page 50 of 56 Testmode:802.11n(HT20) LowestchannelHighestchannel Testmode:802.11n(HT40) LowestchannelHighestchannel ProjectNo.:ZKT-2107133361E Page 51 of 56 Testplotasfollows: 802.11b Lowestchannel Middlechannel Highestchannel ProjectNo.:ZKT-2107133361E Page 52 of 56 802.11g Lowestchannel Middlechannel Highestchannel ProjectNo.:ZKT-2107133361E Page 53 of 56 802.11n(HT20) Lowestchannel Middlechannel Highestchannel ProjectNo.:ZKT-2107133361E Page 54 of 56 802.11n(HT40) Lowestchannel Middlechannel Highestchannel ProjectNo.:ZKT-2107133361E Page 55 of 56 10.ANTENNAREQUIREMENT Standardrequirement: FCCPart15CSection15.203/247(c) 15.203requirement: Anintentionalradiatorshallbedesignedtoensurethatnoantennaotherthanthatfurnishedbytheresponsiblepartyshall beusedwiththedevice.Theuseofapermanentlyattachedantennaorofanantennathatusesauniquecouplingtothe intentionalradiator,themanufacturermaydesigntheunitsothatabrokenantennacanbereplacedbytheuser,butthe useofastandardantennajackorelectricalconnectorisprohibited. 15.247(c)(1)(i)requirement: (i)Systemsoperatinginthe2400-2483.5MHzbandthatisusedexclusivelyforfixed.Point-to-pointoperationsmay employtransmittingantennaswithdirectionalgaingreaterthan6dBiprovidedthemaximumconductedoutputpowerof theintentionalradiatorisreducedby1dBforevery3dBthatthedirectionalgainoftheantennaexceeds6dBi. EUTAntenna: TheantennaisPCBAntenna,thebestcasegainoftheantennais0dBi,referencetotheappendixIIfordetails ProjectNo.:ZKT-2107133361E Page 56 of 56 11.TESTSETUPPHOTO ReferencetotheappendixIfordetails. 12.EUTCONSTRUCTIONALDETAILS ReferencetotheappendixIIfordetails. ※※※※※ENDOFREPORT※※※※※

EUT TEST PHOTO