2AKMG-HSA-N001ERHP Elite Wireless Earbuds

Color side 1: BLACK Flat size: 17.5 x 20 in. Fold 1: 5-panel accordion Fold 2: 5-panel accordion Color side 2: BLACK Finished size: 3.5 x 4 in. إشعارات المنتج Pemberitahuan produk Бележки за продукта Obavještenja o proizvodu Informace o produktu Produktbemærkninger Produkthinweise Tootemärkused Avisos sobre el producto Σημειώσεις προϊόντος Informations sur le produit Obavijesti o proizvodima Avvisi sul prodotto Өнім туралы ескертулер Izstrādājuma paziņojumi Įspėjimuose dėl produktų Termékinformációk Productaankondigingen Produktopplysninger Informacje na temat produktów Avisos do produto Avisos sobre o produto Notificări despre produs Уведомления о продукте Upozornenia o produkte Obvestila o izdelku Tuotetiedotteet Obaveštenja o proizvodu Produktmeddelanden ประกาศเก ี ่ ยวก ั บผล ิ ตภ ั ณฑ ์ Ürün Bildirimleri Зауваження щодо виробу 제품 고지사항 产品通告 產品注意事項 © Copyright 2015-2020 HP Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. Java is a registered trademark of Oracle and/or its affiliates. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Twelfth Edition: August 2020 First Edition: August 2015 Product Notices Regulatory Notices This document provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for your product. Some of these notices may not apply to your product. 이 문서에는 국가 및 지역별 유무선 규제사항 설명과 제품의 준수 정보가 있습니다. 이러한 정보 중 일부는 귀하의 제품에 적용되지 않을 수 있습니다. Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or television technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. For questions regarding this product, write to HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 email [email protected], or call HP at 650-857-1501. To identify your product, refer to the part, series, or model number located on the product. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user’s authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING: Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC/ Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebook computers. During normal operation of tablet PCs and notebook computers with displays equal to or less than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC/Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides included with your computer. During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC/Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides included with your computer. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. FCC/Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your computer. Aviso para o Brasil Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados. Para maiores informações, consulte o site da ANATEL – www.anatel.gov.b…

Text truncated - open the document above for the full version.

Color Side 1: BLACK Flat size: 27.5 X 17 in. Fold 1: 5-panel accordion Fold 2: 5-panel accordion Color Side 2: BLACK Finished size: 5.5 X 3.4 in. عربية 4 ثم ،http://www.hp.com/support موقع إلى انتقل إلى للوصول منتجك على ف ُّ للتعر الإرشادات اتبع دليل لتنزيل المستخدم دلائل حدد .المستخدم دلائل .HP من Bluetooth تقنية طريق عن للإقران المستخدم متجر" من HP Elite Earbuds تطبيق بتنزيل قم استخدم .App Store™ أو Google Play™ أو "Microsoft .الأذن سماعات إعدادات لتكوين التطبيق تعمل التي HP كمبيوتر أجهزة بعض على ا ً مسبق ا ً مثبت التطبيق يكون قد .Windows 10 التشغيل بنظام الأذن وسماعتي العلبة مكونات :واليسرى اليمنى الأذن سماعتي شحن مصباحا 1 الشحن تم :الأخضر الشحن :الأحمر :العلبة شحن مصباح 2 يتم أنه على يدل فهذا بالطاقة، التوصيل تم إذا :الأخضر يدل فهذا بالطاقة، التوصيل يتم لم وإذا .العلبة شحن .%40 من بأكثر مشحونة العلبة أن على يجري أنه على يدل فهذا بالطاقة، التوصيل تم إذا :الأحمر على يدل فهذا بالطاقة، التوصيل تم وإذا .العلبة شحن .العلبة شحن ضرورة USB Type-C منفذ 3 المحيط التشويش منع بتقنية ميكروفونات 4 اللمس مستشعر منطقة 5 الأذن داخل ميكروفونات 6 الميكروفونات 7 :Bluetooth تقنية بواسطة بجهاز للاتصال العلبة وأن العلبة في السماعتين كلتا أن من تأكد .1 ثوان، 5 وبعد .العلبة غطاء افتح ثم شحنها، إلى تحتاج لا لمده Bluetooth بتقنية الإقران وضع الأذن سماعتا تدخل .ثانية 120 .الغطاء فتح أعد ثم العلبة، أغلق الإقران، وضع للدخول مرة أخرى في الشركة لإرشادات ا ً وفق الأذن بسماعتي جهازك أقرن .2 .للجهاز عة ِّ المصن :المقترنة الأجهزة بين للتنقل إذ .ثانيتين لمدة المستشعر على الاستمرار مع اضغط .1 .ةأجهز 4 إلى يصل ما إقران يمكنك :)فقط المحمول الجهاز( الموسيقى لتشغيل أو الموسيقي لتشغيل المستشعر منطقة فوق انقر .1 .ا ً مؤقت تشغيلها إيقاف :)فقط المحمول الجهاز( الهاتفية المكالمات على للرد .واردة مكالمة على للرد المستشعر منطقة المس .1 BAHASA INDONESIA 4 Kunjungi http://www.hp.com/support, dan ikuti petunjuk untuk mengidentifikasi produk Anda agar mendapat petunjuk. Pilih Manuals (Petunjuk) untuk mengunduh HP Bluetooth Pairing User Guide (Panduan Pengguna Penyandingan Bluetooth HP). Unduh aplikasi HP Elite Earbuds dari Microsoft Store, Google Play™, atau App Store™. Gunakan aplikasi tersebut untuk mengonfigurasi pengaturan earbud. Aplikasi ini mungkin sudah terinstal di beberapa komputer HP yang menjalankan sistem operasi Windows 10. Komponen casing dan earbud 1 Lampu pengisian daya earbud kiri dan kanan: Hijau: Daya penuh Merah: Sedang mengisi daya 2 Lampu pengisi daya casing: Hijau: Jika tersambung ke sumber daya, daya casing akan terisi. Jika tidak tersambung ke sumber daya, daya casing terisi lebih dari 40%. Merah: Jika tersambung ke sumber daya, daya casing sedang diisi. Jika tidak tersambung ke sumber daya, daya casing harus diisi. 3 Port USB Type-C 4 Mikrofon derau sekitar 5 Area sensor sentuh 6 Mikrofon in-ear 7 Mikrofon Untuk menyambungkan ke perangkat melalui Bluetooth: 1. Pastikan kedua earbud berada di dalam casing dan daya casing tidak perlu diisi, lalu buka penutup casing. Setelah 5 detik, earbud akan menggunakan mode penyandingan Bluetooth selama 120 detik. Untuk menggunakan kembali mode penyandingan, tutup casing, lalu buka kembali penutupnya. 2. Sandingkan perangkat ke earbud sesuai dengan petunjuk produsen perangkat. Untuk memulai siklus perangkat penyandingan: 1. Ketuk dan tahan sensor selama 2 detik. Anda dapat menyandingkan hingga 4 perangkat. Untuk memutar musik )khusus perangkat seluler(: 1. Ketuk area sensor untuk memutar atau menjeda musik. Untuk menjawab panggilan telepon )khusus perangkat seluler(: 1. Ketuk area sensor untuk menjawab panggilan masuk. БЪЛГАРСКИ 4 Отидете на адрес http://www.hp.com/support и следвайте инструкциите, за да откриете ръководствата за вашия продукт. Изберете Manuals (Ръководства), за да изтеглите HP Bluetooth Pairing User Guide (Ръководство за потребителя на HP за сдвояване чрез Bluetooth). Изтеглете приложението HP Elite Earbuds от Microsoft Store, Google Play™ или App Store™. Използвайте приложението, за да конфигурирате настройките на слушалките. Приложението може да е предварително инсталирано на някои компютри на HP с операционна система Windows 10. Компоненти на калъфа и слушалките 1 Индикатори за зареждане на лявата и дясната слушалка: Зелено: Заредено Червено: Зареждане 2 Индикатор за зареждане на калъфа: Зелено: Ако е свързан към електрозахранването, калъфът е зареден. Ако не е свързан към електрозахранването, калъфът има заряд над 40%. Червено: Ако е свързан към електрозахранването, калъфът се зарежда. Ако не е свързан към електрозахранването, калъфът трябва да се зареди. 3 USB Type-C порт 4 Микрофони за околния шум 5 Област на сензора 6 Микрофони в ушите 7 Микрофони За да се свържете към устройство чрез Bluetooth: 1. Уверете се, че и двете слушалки са в калъфа и че той не трябва да се зарежда, след което отворете капака на калъфа. След 5 сек слушалките влизат в режим на сдвояване чрез Bluetooth за 120 секунди. За да влезете отново в режим на сдвояване, затворете калъфа, след което отворете пак капака. 2. Сдвоете своето устройство със слушалките според инструкциите на производителя на устройството. За да свържете между сдвоени устройства: 1. Натиснете и задръжте сензора за 2 сека. Можете да сдвоите до 4 устройства. За да възпроизвеждате музика (само за мобилно устройство): 1. Докоснете областта на сензора, за да възпроизведете или поставите на пауза музиката. За да отговорите на телефонни разговори (само за мобилни устройства): 1. Докоснете областта на сензора, за да отговорите на входящо повикване. ČESKY 4 Přejděte na http://www.HP.com/support a podle pokynů identifikujte svůj produkt pro vyhledání příruček. Pokud chcete stáhnout UživatelskoupříručkuHPpárováníBluetooth, vyberte možnost Uživatelské příručky. Stáhněte si aplikaci HP Elite Earbuds z obchodu Microsoft Store, Google Play™ nebo App Store™. Použijte aplikaci ke konfiguraci nastavení sluchátek. Aplikace může být předinstalována na některých počítačích HP s operačním systémem Windows 10. Součásti pouzdra a sluchátek 1 Kontrolky nabíjení pravého a levého sluchátka: Zelená: nabito Červená: nabíjení 2 Kon…

Text truncated - open the document above for the full version.

Date: 2021-02-24 FCC ID: 2AKMG-HSA-N001ER To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Nuheara Limited Name: Jean-Marie Rudd Title: Chief Finance Officer Tel: +61 8 6555 9999 E-mail: [email protected]

Date: 2021-02-24 FCC ID: 2AKMG-HSA-N001ER A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: Nuheara Limited hereby authorizes Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia of BV CPS Taoyuan on Nuheara Limited’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Nuheara Limited Name: Jean-Marie Rudd Title: Chief Financial Officer Tel: +61 8 6555 9999 E-mail: [email protected]

Reference No.: BHSE-WTW-P20110975_EXT_Right Page No. 1 / 9 CONSTRUCTION PHOTOS OF EUT Brand: HP, Model: HSA-N001E Right Earbud Reference No.: BHSE-WTW-P20110975_EXT_Right Page No. 2 / 9 Reference No.: BHSE-WTW-P20110975_EXT_Right Page No. 3 / 9 Reference No.: BHSE-WTW-P20110975_EXT_Right Page No. 4 / 9 Reference No.: BHSE-WTW-P20110975_EXT_Right Page No. 5 / 9 Charging Case Reference No.: BHSE-WTW-P20110975_EXT_Right Page No. 6 / 9 Reference No.: BHSE-WTW-P20110975_EXT_Right Page No. 7 / 9 Reference No.: BHSE-WTW-P20110975_EXT_Right Page No. 8 / 9 Reference No.: BHSE-WTW-P20110975_EXT_Right Page No. 9 / 9

Label Label location

Reference No.: BHSE-WTW-P20110975_INT_Right Page No. 1 / 10 CONSTRUCTION PHOTOS OF EUT Brand: HP, Model: HSA-N001E Right Earbud Reference No.: BHSE-WTW-P20110975_INT_Right Page No. 2 / 10 Reference No.: BHSE-WTW-P20110975_INT_Right Page No. 3 / 10 Reference No.: BHSE-WTW-P20110975_INT_Right Page No. 4 / 10 Reference No.: BHSE-WTW-P20110975_INT_Right Page No. 5 / 10 Reference No.: BHSE-WTW-P20110975_INT_Right Page No. 6 / 10 Reference No.: BHSE-WTW-P20110975_INT_Right Page No. 7 / 10 Charging Case Reference No.: BHSE-WTW-P20110975_INT_Right Page No. 8 / 10 Reference No.: BHSE-WTW-P20110975_INT_Right Page No. 9 / 10 Reference No.: BHSE-WTW-P20110975_INT_Right Page No. 10 / 10

SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 26 Report No. : SFBBHSE-WTW-P20110975 Issued Date : Feb. 23, 2021 SAR Test Report Report No. : SFBBHSE-WTW-P20110975 Applicant : Nuheara Limited Address : 190 Aberdeen St, Northbridge, Western Australia 6003 Product : HP Elite Wireless Earbuds FCC ID : 2AKMG-HSA-N001ER Brand : HP Model No. : HSA-N001E Standards FCC 47 CFR Part 2 (2.1093), IEEE C95.1:1992, IEEE Std 1528:2013 KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 447498 D01 v06 Sample Received Date : Nov. 11, 2020 Date of Testing : Feb. 05, 2021 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Shelly Hsueh / Specialist Approved By : Gordon Lin / Manager FCC Accredited No.: TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 26 Report No. : SFBBHSE-WTW-P20110975 Issued Date : Feb. 23, 2021 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY6 System ............................................................................................................................................... 6 3.2.1 Robot ............................................................................................................................................................... 7 3.2.2 Probes ............................................................................................................................................................. 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 8 3.2.4 Phantoms ......................................................................................................................................................... 8 3.2.5 Device Holder .................................................................................................................................................. 9 3.2.6 System Validation Dipoles ............................................................................................................................. 10 3.2.7 Power Source ................................................................................................................................................ 10 3.2.8 Tissue Simulating Liquids .............................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 13 3.4 SAR Measurement Procedure ................................................................................................................................... 14 3.4.1 Area Scan and Zoom Scan Procedure .......................................................................................................... 14 3.4.2 Volume Scan Procedure ................................................................................................................................ 15 3.4.3 Power Drift Monitoring ..................................…

Text truncated - open the document above for the full version.

Report No.: RFBHSE-WTW-P20110975 Page No. 1 / 51 Report Format Version: 6.1.1 FCC Test Report Report No.: RFBHSE-WTW-P20110975 FCC ID: 2AKMG-HSA-N001ER Test Model: HSA-N001E Received Date: Dec. 01, 2020 Test Date: Jan. 18 ~ Jan. 20, 2021 Issued Date: Feb. 18, 2021 Applicant: Nuheara Limited Address: 190 Aberdeen St, Northbridge, Western Australia 6003 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RFBHSE-WTW-P20110975 Page No. 2 / 51 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal .................................................................................................................. 10 3.4 Description of Support Units .............................................................................................................. 11 3.4.1 Configuration of System under Test ................................................................................................... 11 3.5 General Description of Applied Standards and References ............................................................. 12 4 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures ................................................................................................................................. 15 4.1.4 Deviation from Test Standard ............................................................................................................ 15 4.1.5 Test Setup .......................................................................................................................................... 16 4.1.6 EUT Operating Conditions ................................................................................................................. 17 4.1.7 Test Results ....................................................................................................................................... 18 4.2 Conducted Emission Measurement .................................................................................................. 28 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 28 4.2.2 Test Instruments ................................................................................................................................ 28 4.2.3 Test Procedures ................................................................................................................................. 29 4.2.4 Deviation from Test Standard ............................................................................................................ 29 4.2.…

Text truncated - open the document above for the full version.

SAR Test Report Report Format Version 5.0.0 Report No. : SFBBHSE-WTW-P20110975 <Photographs of EUT> <Antenna Location> SAR Test Report Report Format Version 5.0.0 Report No. : SFBBHSE-WTW-P20110975 <Photographs of SAR Setup> Right Bud Rear Face of EUT at 0 mm Left Side of EUT at 0 mm Right Side of EUT at 0 mm Top Side of EUT at 0 mm Bottom Side of EUT at 0 mm

Reference No.: BHSE-WTW-P20110975_TSup Page No. 1 / 7 PHOTOGRAPHS OF THE TEST CONFIGURATION Conducted Emission Test Mode B Reference No.: BHSE-WTW-P20110975_TSup Page No. 2 / 7 Mode C Reference No.: BHSE-WTW-P20110975_TSup Page No. 3 / 7 (BT EDR & BT LE) Radiated Emission below 1GHz Test Mode A Reference No.: BHSE-WTW-P20110975_TSup Page No. 4 / 7 Mode B Reference No.: BHSE-WTW-P20110975_TSup Page No. 5 / 7 Radiated Emission above 1GHz Test Mode A Reference No.: BHSE-WTW-P20110975_TSup Page No. 6 / 7 (NFMI) Radiated Emission Test (Frequency below 30MHz) Mode A Reference No.: BHSE-WTW-P20110975_TSup Page No. 7 / 7 Radiated Emission Test (Frequency above 30MHz) Mode B