2AKMG00000NU318IQBuds2 Max

IQbuds 2 Max: SKU Model: NU318 True wireless active noise cancelling earphones Safety and Handling Information Important Safety Instructions ➢ Read this instruction manual before using your IQbuds 2 Max wireless earbuds (the product). ➢ Only use the earbuds in environments where Bluetooth wireless transmission is permitted. Recommended Use and Storage ➢ The Nuheara IQbuds 2 Max, are true wireless (Active hybrid noise cancelling) Bluetooth earbuds intended to be used for wirelessly listening to music or making phone calls as well as listening to the world around you using hearing compensation and noise filter algorithms. ➢ Bud operating temperature range: -10 ̊C to 55 ̊C while in ear use. ➢ The Case temperature range is +10 ̊C to 45 ̊C when USB Case charging active. ➢ The Case temperature range is 0 ̊C to 45 ̊C when un-plugged and bud charging active. ➢ Recommended storage conditions: Temperature 20 ̊C to 30 ̊C, humidity less than 93%. Hearing Safety ➢ Protect your hearing from high volume levels. Hearing damage can occur when headphones and earbuds are used at high volume for prolonged periods of time. The sound quality of Nuheara products is good at low and medium volume levels. Nuheara IQbuds 2 Max are compliant to EN50332-1 sound pressure levels. ➢ IQbuds 2 Max are not hearing aids and are not intended to diagnose, treat, cure or alter the structure or function of the body. IQbuds 2 Max will not restore normal hearing and will not prevent or improve a hearing impairment resulting from organic conditions. IQbuds 2 Max are intended to amplify environmental sound for non-hearing-impaired consumers. They are not intended to compensate for hearing impairment or to address listening situations that are typically associated with and indicative of hearing loss. Batteries ➢ Nuheara IQbuds 2 Max and the Charge Case include rechargeable lithium ion batteries. Do not attempt to replace the IQbuds 2 Max bud batteries or the charger accompanying battery yourself. You could damage the battery which could cause overheating, fire or injury. Batteries in this product are only serviceable by Nuheara or an authorised service agent and should be returned to Nuheara for service or replacement. ➢ IQbuds 2 Max buds or Charge Case should not be recharged in temperatures exceeding 45 ̊C, or when conditions are expected to exceed these temperatures. Doing so could result in overheating, fire or injury. Charge Case Rated Voltage ➢ The rated voltage range is 4.40V to 5.25V (>1.1A Ideally) (As per the USB2.0 standard) ➢ Ensure that the AC plug pack to USB2.0 charger (not provided) meets the requirements the requirements of IEC/EN60950-1 or IEC 62368-1 (from Dec 2020) and has been tested and approved according to national and local standards. Safety instructions for Lithium rechargeable batteries WARNING ➢ If abused or misused, the rechargeable batteries may leak, in extreme cases they may even present a risk of explosion, fire development, heat generation, smoke or gas development. ➢ At end of life, dispose of IQbuds 2 Max at a battery / electronic waste collection centre. Preventing accidents and damage to health ➢ Keep the product, accessories and packaging out of the reach of children and pets to prevent accidents such as chocking or swallowing. ➢ Do not use the product in environments that require special attention for example when driving or performing skilled or dangerous jobs. ➢ This product generates magnetic fields that could cause interference with cardiac pacemakers, implanted defibrillators (ICD’s) and other implants. Always maintain at least 10- cm (3.94”) between the earbuds and / or charge case and the implanted device. ➢ Earphones can lead to ear infections is not properly cleaned. Clean Nuheara IQbuds 2 Max buds and silicone ear tips regularly. If skin problems develop, discontinue use and consult with a doctor. ➢ Ear tips are designed to sit comfortably in your ear and should not be forced into your ear at any time. If you have trouble fitting the silicone ear tips or memory foam tips, please contact Nuheara support. Preventing damage and malfunctions to the product ➢ For safe operation do not submerse the product in liquid. Liquids entering the housing of the product can cause a short-circuit and damage the electronics. ➢ Avoid exposure to extreme temperature (hairdryer, heater, extended exposure to sunlight etc) ➢ Only clean the product with a soft dry cloth. ➢ Clean the charging contacts on the earbuds and the charge case from time to time using a soft cloth or cotton swab. Information on Disposal of Waste Electrical & Electronic Equipment (WEEE) ➢ Disposal of your device and its batteries is subject to WEEE Directive Recast (Directive 2012/19/EU) and Battery Directive (Directive 2006/66/EC). ➢ Used electrical and electronic equipment should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product to designated collection points where it will be accepted free of charge. ➢ Alternatively, in some countries you may be able to return your products to your local retailer upon purchase of an equivalent new product. ➢ Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. ➢ Please contact your local authority for further details of your nearest designated collection point. ➢ Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. Reduction of Hazardous substances ➢ Your products comply with REACH regulation (EC 1907/2006) (SVHC list (201 substances as of Oct 2019) and ROHS 3 Directive Recast (Directive 2015/863) ➢ Your product is also is tested to Californian Prop 65 compliance. This means it is tested to ensure that the exposure to current listed chemicals pose “no significant risk level” for cancer causing chemicals or “no observ…

Text truncated - open the document above for the full version.

IN THE BOX: QUICK START GUIDE USB CHARGE CABLE CHARGE CASEIQBUDS 2 EAR TIP TRAYCARRY BAG CHARGING YOUR IQBUDS AND CASE FRONT LIGHTS (IQBUDS CHARGE) What Do These Lights Mean? Battery Life Front Lights (IQbuds Charge) IQbuds2 Battery Life Side Light (Case Charge) (Plugged in with USB cable) Side Light (Case Charge) IQbuds are Charged Your case carries and charges your IQbuds. Your case provides you with the convenience of charging your IQbuds when you are out and about. You can charge your case via the USB cable connected to a USB power source (Wall charger, computer, etc.) The case has lights that indicate different states, please see below: Up to 5 Hours Of streaming media Up to 8 Hours Of hearing features *Battery life may be less if using hearing features and streaming media simultaneously. (Music, Video, IQstreamTV)(World volume, Ear ID, etc.) Case is ChargedYour case holds more than 1 full charge for your IQbuds IQbuds are ChargingCase is ChargingYour case holds less than 1 full charge for your IQbuds SIDE LIGHT (CASE CHARGE) *Please note that the lights will turn on when the case is opened or closed. The lights will then turn off after a few seconds for battery efficiency. *Your IQbuds will need to be in the case for the front lights to activate. FITTING YOUR IQBUDS INSERTING IQBUDS FIT LIKE AN EARPLUG EXPERIMENT WITH TIPS Check the IQbuds for left and right markings to make sure you put the correct bud in the correct ear. Make sure the tip is at the bottom before inserting. For high quality bass and noise reduction IQbuds need to form an airtight seal. Push the buds into your ears as you would an earplug. Pick the largest size ear tip that fits in your ear comfortably and forms the best seal. The tips should pull off the IQbuds fairly easily, hold the silicone or foam and pull to remove. Set up instructions in the app: IQbuds Set up instructions in the app: IQbuds Set up instructions in the app: IQbuds Set up instructions in the app: IQbuds APP SETUP + PAIRING PAIRING To activate pairing mode, hold both tap sensors for about 5 seconds, Wait until you hear “Pairing”. This will allow your phone to discover your IQbuds in bluetooth settings and in the app. All set up instructions will be in the app to guide you. Download the IQbuds app to begin the set up process. IQbuds Nuheara TAP TOUCH These highlighted green surfaces are the tap sensors. You can control different features with tap gestures. BLUETOOTH iOS (Apple) Please go to bluetooth settings and make sure bluetooth is on. Find the name that matches on the left (XXX represents a unique code). Once IQbuds are connected, return to the app to continue the process. When back in the app, you will be shown the bluetooth pairing pop up message, tap “Pair”. After the pairing screen you will be presented with different options based on what software version your phone is running. iPhones with iOS 13 and above will allow you to pair in the app. You will be shown a pop up message asking you to pair, like this: If your iPhone is on a software version lower than iOS 13, you will be asked to leave the app, go to bluetooth settings and connect to your IQbuds there, see below: Tap “Pair” and you will be able to proceed through the app to complete the process. *IQbuds2MAX_XXX All IQbuds have a unique 3 letter/number code If you are unsure of your phone software version, please go to: Settings > General > About > There will be an item called “Software Version” and the version number is displayed next to it. Make sure Bluetooth is on Tap this to connect IQbuds2MAX_XXX Make sure Bluetooth is on Tap this to connect IQbudsMAX2_XXX Android You will be shown a connected screen and be able to proceed through the app. After the pairing screen you will be presented with a pop up message asking you to connect, like this: If you have not activated pairing properly you may be taken back to the pairing screen, in which case try the pairing action again and wait until you hear “Pairing”. You will then be presented with the screen below: Please go to bluetooth settings and make sure bluetooth is on. Find the name that matches on the left (XXX represents a unique code). Once IQbuds are connected, return to the app to complete the process. *IQbuds2MAX_XXX All IQbuds have a unique three letter/number code Tap “Connect” and you will be able to proceed through the app to complete the process. TAP TOUCH CONTROLS Please note the below are default settings. You can customize them in Tap Touch in the app. This allows you to pick and choose different functions to assign to different tap gestures so you can use your IQbuds how you want. *Phone call functions cannot be changed Left TapRight Tap Play/Pause Phone Call Functions: Answer Call Mute Call On/Off Phone Call Functions: Reject/Hang up call World On/Off Activate SiriActivate Siri NoneChange Location Left Double Tap Right Double Tap Left Long TapRight Long Tap

Page 1 of 12 Report No.: 200117C14 CONSTRUCTION PHOTOS OF EUT Brand Name: Nuheara Limited / Model Name: NU318 Page 2 of 12 Report No.: 200117C14 Page 3 of 12 Report No.: 200117C14 Page 4 of 12 Report No.: 200117C14 BT Antenna Page 5 of 12 Report No.: 200117C14 Page 6 of 12 Report No.: 200117C14 Page 7 of 12 Report No.: 200117C14 Page 8 of 12 Report No.: 200117C14 Page 9 of 12 Report No.: 200117C14 Page 10 of 12 Report No.: 200117C14 Page 11 of 12 Report No.: 200117C14 Page 12 of 12 Report No.: 200117C14

Label Label location

Page 1 of 15 Report No.: 200117C14 CONSTRUCTION PHOTOS OF EUT Brand Name: Nuheara Limited / Model Name: NU318 Page 2 of 15 Report No.: 200117C14 Page 3 of 15 Report No.: 200117C14 Page 4 of 15 Report No.: 200117C14 Page 5 of 15 Report No.: 200117C14 Page 6 of 15 Report No.: 200117C14 Page 7 of 15 Report No.: 200117C14 Page 8 of 15 Report No.: 200117C14 Page 9 of 15 Report No.: 200117C14 Page 10 of 15 Report No.: 200117C14 Page 11 of 15 Report No.: 200117C14 Page 12 of 15 Report No.: 200117C14 Page 13 of 15 Report No.: 200117C14 Page 14 of 15 Report No.: 200117C14 Page 15 of 15 Report No.: 200117C14

FCC SAR Exclusion Report Report Format Version 5.0.0 Page No. : 1 of 8 Report No. : SF200117C14 Issued Date : Mar. 10, 2020 FCC SAR Exclusion Report Report No. : SF200117C14 Applicant : Nuheara Limited Address : 190 Aberdeen St, Northbridge, Western Australia 6003 Product : IQbuds 2 Max Brand : Nuheara Limited FCC ID : 2AKMG00000NU318 Model No. : NU318 Standards : FCC 47 CFR Part 2 (2.1093), IEEE C95.1:1992, IEEE Std 1528:2013 KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 447498 D01 v06 Sample Received Date : Jan. 17, 2020 Date of Evaluation : Mar. 06, 2020 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Lena Wang / Specialist Approved By : Gordon Lin / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Exclusion Report Report Format Version 5.0.0 Page No. : 2 of 8 Report No. : SF200117C14 Issued Date : Mar. 10, 2020 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement Evaluation .............................................................................................................................................. 6 3.1 Maximum Output Power ............................................................................................................................................... 6 3.1.1 Maximum Target Conducted Power ................................................................................................................... 6 3.1.2 Time-Avg. Power calculation. ............................................................................................................................. 6 3.2 SAR Testing Exclusions ............................................................................................................................................... 7 4. Information on the Testing Laboratories ............................................................................................................................. 8 Appendix A. Photographs of EUT and Setup FCC SAR Exclusion Report Report Format Version 5.0.0 Page No. : 3 of 8 Report No. : SF200117C14 Issued Date : Mar. 10, 2020 Release Control Record Issue No. Reason for Change Date Issued SF200117C14 Initial release Mar. 10, 2020 FCC SAR Exclusion Report Report Format Version 5.0.0 Page No. : 4 of 8 Report No. : SF200117C14 Issued Date : Mar. 10, 2020 1. Summary of Maximum SAR Value Equipment Class Mode Highest Reported SAR 1g (W/kg) DSS Bluetooth Not Required Note: 1. The SAR limit (Head & Body: SAR 1g 1.6 W/kg) for general population / uncontrolled exposure is specified in FCC 47 CFR part 2 (2.1093) and ANSI/IEEE C95.1-1992. FCC SAR Exclusion Report Report Format Version 5.0.0 Page No. : 5 of 8 Report No. : SF200117C14 Issued Date : Mar. 10, 2020 2. Description of Equipment Under Test EUT Type IQbuds 2 Max Brand Name Nuheara Limited FCC ID 2AKMG00000NU318 Model Name NU318 Tx Frequency Bands (Unit: MHz) Bluetooth : 2402 ~ 2480 Uplink Modulations Bluetooth : GFSK, π/4-DQPSK, 8-DPSK Maximum Tune-up Conducted Power (Unit: dBm) Please refer to section 3.1 of this report Antenna Type PIFA Antenna EUT Stage Engineering Sample Note: 1. The above EUT information is declared by manufacturer and for more detailed features description please refers to the manufacturer's specifications or User's Manual. 2. Only left earbud has RF function. FCC SAR Exclusion Report Report Format Version 5.0.0 Page No. : 6 of 8 Report No. : SF200117C14 Issued Date : Mar. 10, 2020 3. SAR Measurement Evaluation 3.1 Maximum Output Power 3.1.1 Ma…

Text truncated - open the document above for the full version.

Report No.: RF200117C14 Page No. 1 / 28 Report Format Version: 6.1.1 FCC Test Report Report No.: RF200117C14 FCC ID: 2AKMG00000NU318 Test Model: NU318 Received Date: Jan. 17, 2020 Test Date: Feb. 11, 2020 ~ Feb. 12, 2020 Issued Date: Feb. 21, 2020 Applicant: Nuheara Limited Address: 190 Aberdeen St, Northbridge, Western Australia 6003 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF200117C14 Page No. 2 / 28 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ........................................................................................................................... 4 2 Summary of Test Results ........................................................................................................................... 5 2.1 Measurement Uncertainty ..................................................................................................................... 5 2.2 Modification Record .............................................................................................................................. 5 3 General Information ................................................................................................................................... 6 3.1 General Description of EUT .................................................................................................................. 6 3.2 Description of Test Modes ..................................................................................................................... 7 3.2.1 Test Mode Applicability and Tested Channel Detail .................................................................... 7 3.3 Description of Support Units ................................................................................................................. 8 3.3.1 Configuration of System under Test ........................................................................................... 8 3.4 General Description of Applied Standards ............................................................................................ 9 4 Test Types and Results ............................................................................................................................ 10 4.1 Radiated Emission and Bandedge Measurement .............................................................................. 10 4.1.1 Limits of Radiated Emission and Bandedge Measurement ..................................................... 10 4.1.2 Test Instruments ........................................................................................................................ 11 4.1.3 Test Procedures ........................................................................................................................ 12 4.1.4 Deviation from Test Standard ................................................................................................... 12 4.1.5 Test Setup ................................................................................................................................. 13 4.1.6 EUT Operating Conditions ........................................................................................................ 13 4.1.7 Test Results .............................................................................................................................. 14 4.2 Conducted Emission Measurement .................................................................................................... 21 4.2.1 Limits of Conducted Emission Measurement ........................................................................... 21 4.2.2 Test Instruments ....................................................................................................................... 21 4.2.3 Test Procedures ........................................................................................................................ 22 4.2.4 Deviation from Test Standard ................................................................................................... 22 4.2.5 Test Setup .......................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF200117C14 1 / 7 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Mode B Report No.: RF200117C14 2 / 7 CONDUCTED EMISSION TEST Mode C Report No.: RF200117C14 3 / 7 (For BT EDR & BT LE) Mode A RADIATED EMISSION TEST BELOW 1GHz Report No.: RF200117C14 4 / 7 RADIATED EMISSION TEST ABOVE 1GHz Report No.: RF200117C14 5 / 7 Mode B RADIATED EMISSION TEST BELOW 1GHz Report No.: RF200117C14 6 / 7 (For NFMI) Mode A RADIATED EMISSION TEST 9kHz to 30MHz Report No.: RF200117C14 7 / 7 RADIATED EMISSION TEST BELOW 1GHz