2AKUR-IQ3FPT Camera

IQ3 fast user manual By WiFi AP mode 1. Camera connect power supply. 2. After led light flash and pan move, use mobile wifi setup to search AP hotspot FC-xxxxxx, wifi password is the first 14 serial code. 3. Open APP(FunSDKDemo-FSSXM), follow below instructions step by step: open this app click here. Media function click here. Play live video click here. Device list(Lan) Choose this device and click . click here.Control device input password here.(QRCz7gHxm) 4. Start live video. By lan cable mode 1)power on the camera,connect lan cable 2)Open VMS->device manager->search->add device, admin / QRCz7gHxm 3) start live view FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. .

Hangzhou Jufeng Technology Co., Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/28/2023 U.S. Agent Designation Hangzhou Jufeng Technology Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AKUR-IQ3): Name and company of U.S. agent: ACT Lab LLC Physical U.S. address of agent: 3280 East 59th Street Long Beach, CA 90805 United States FRN of U.S. agent: 0033465568 Email address of U.S. agent: [email protected] ACT Lab LLC acknowledges their obligation to accept service of process on behalf of Hangzhou Jufeng Technology Co., Ltd. Hangzhou Jufeng Technology Co., Ltd. with the FRN 0026154054 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). Sincerely, Signature Fang Lai Manager Hangzhou Jufeng Technology Co., Ltd. Signature Mr Scott Huber Senior Technical Director ACT Lab LLC 48_[mo del] US_Agent_2.911(d)(7) - U, V04

Hangzhou Jufeng Technology Co., Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/27/2023 To whom it may concern: We, Hangzhou Jufeng Technology Co., Ltd. hereby certify that the equipment for which authorization is sought (FCC ID: 2AKUR-IQ3) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). Sincerely, Signature Fang Lai Manager Hangzhou Jufeng Technology Co., Ltd. 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V02

FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT

FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Appendix IID Label Size for the label: 30mm X 30mm Appendix II ID Label Location FPT Camera FCC ID: 2AKUR-IQ3 Model: FPT Camera IQ3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 3 Internal of EUT Photo 4 Internal of EUT Antenna FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Photo 5 Internal of EUT Photo 6 Internal of EUT FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Photo 7 Appearance of PCB Photo 8 Appearance of PCB FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Photo 9 Appearance of PCB Photo 10 Appearance of PCB FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Photo 11 Appearance of PCB Photo 12 Appearance of PCB FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Photo 13 Appearance of PCB Photo 14 Appearance of PCB FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Photo 15 Appearance of PCB Photo 16 Appearance of PCB

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202305-0134-10 Page: 1 of 3 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Maximum Permissible Exposure Evaluation FCC ID: 2AKUR-IQ3 1. Client Information Applicant : Hangzhou Jufeng Technology Co., Ltd. Address : Building 9, Yinhu Innovation Center, No.9 FuXian Road, YinHu Street, Hangzhou, China Manufacturer : Hangzhou Jufeng Technology Co., Ltd. Address : Building 9, Yinhu Innovation Center, No.9 FuXian Road, YinHu Street, Hangzhou, China 2. General Description of EUT EUT Name : FPT Camera Models No. : FPT Camera IQ3 Model Different : ---- Product Description : Operation Frequency: 802.11b/g/n(HT20): 2412MHz~2462MHz 802.11n(HT40): 2422MHz~2452MHz Antenna Gain: 4.06dBi FPC Antenna Power Rating : Input: AC 220V Output: 12V, 1A Software Version : V1.0 Hardware Version : V1.0 Connecting I/O Port(S) : Please refer to the User's Manual Remark : the evaluation report used the EUT(202305-0134-7-2#). Report No.: TBR-C-202305-0134-10 Page: 2 of 3 TB-RF-074-1.0 MPE Calculations for WIFI 1. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 2. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR 2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 3. Simultaneous transmission MPE Considerations According to KDB447498: All transmitters and antennas in the host must be either evaluated for MPE compliance, by measurement or computational modeling, or qualify for the standalone MPE test exclusion in section 7.1. Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modeled or measured field strengths or power density, is ≤ 1.0. This means that: ∑ of MPE ratios ≤ 1.0 Report No.: TBR-C-202305-0134-10 Page: 3 of 3 TB-RF-074-1.0 4. Test Result: Mode Conducted Power(max) (dBm) Turn-up Power (dB) Max tune up power (dBm) [P] ANT Gain (dBi) [G] Distance (cm) [R] Power Density (mW/ cm 2 ) [S] Limit of Power Density (mW/ cm 2 ) (S) 802.11b 17.645 18±1 19 4.06 20 0.0402 1 17.022 17±1 18 4.06 20 0.0320 1 17.487 17±1 18 4.06 20 0.0320 1 802.11g 12.135 12±1 13 4.06 20 0.0101 1 12.451 12±1 13 4.06 20 0.0101 1 12.89 13±1 14 4.06 20 0.0127 1 802.11n(HT20) 12.441 12±1 13 4.06 20 0.0101 1 11.75 12±1 13 4.06 20 0.0101 1 12.267 12±1 13 4.06 20 0.0101 1 802.11n(HT40) 10.72 11±1 12 4.06 20 0.0080 1 10.693 11±1 12 4.06 20 0.0080 1 11.105 11±1 12 4.06 20 0.0080 1 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range (MHz) Power density (mW/ cm 2 ) 300-1,500 F/1500 1,500-100,000 1.0 For 2.4WIFI :2412~2462 MHz MPE limit S: 1mW/ cm 2 The worst MPE is calculated as 0.0402mW/ cm2 < limit 1mW / cm 2 . So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. 6. Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. -----END OF THE REPORT-----

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0134-14 Page: 1 of 63 FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 RF Test Data for 2.4G WiFi (Conducted Measurements) General Description of EUT Product Name: FPT Camera Test Model: FPT Camera IQ3 Sample ID: 202305-0134-7-2# Environmental Conditions Temperature: 25°C Relative Humidity: 55% Test Voltage: DC 12V Test Engineer: Huang jian ping Note: For a more detailed features description, please refer to the report TBR-C-202305-0134-14 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0134-14 Page: 2 of 63 FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Contents 1. Duty Cycle ........................................................................................................................................................................................... 3 2. Maximum Conducted Output Power ............................................................................................................................................... 10 3. -6dB Bandwidth ................................................................................................................................................................................ 11 4. Occupied Channel Bandwidth ......................................................................................................................................................... 18 5. Maximum Power Spectral Density Level ......................................................................................................................................... 25 6. Band Edge ........................................................................................................................................................................................ 32 7. Conducted RF Spurious Emission .................................................................................................................................................. 41 8. Restrict Band .................................................................................................................................................................................... 54 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0134-14 Page: 3 of 63 FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT b 2412 Ant1 100 0 0 NVNT b 2437 Ant1 100 0 0 NVNT b 2462 Ant1 100 0 0 NVNT g 2412 Ant1 90.43 0.44 0.53 NVNT g 2437 Ant1 90.43 0.44 0.53 NVNT g 2462 Ant1 90.48 0.43 0.53 NVNT n(HT20) 2412 Ant1 100 0 0 NVNT n(HT20) 2437 Ant1 100 0 0 NVNT n(HT20) 2462 Ant1 100 0 0 NVNT n(HT40) 2422 Ant1 100 0 0 NVNT n(HT40) 2437 Ant1 100 0 0 NVNT n(HT40) 2452 Ant1 100 0 0 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0134-14 Page: 4 of 63 FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Test Graphs Duty Cycle NVNT b 2412MHz Ant1 Duty Cycle NVNT b 2437MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0134-14 Page: 5 of 63 FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Duty Cycle NVNT b 2462MHz Ant1 Duty Cycle NVNT g 2412MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0134-14 Page: 6 of 63 FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Duty Cycle NVNT g 2437MHz Ant1 Duty Cycle NVNT g 2462MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0134-14 Page: 7 of 63 FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Duty Cycle NVNT n(HT20) 2412MHz Ant1 Duty Cycle NVNT n(HT20) 2437MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0134-14 Page: 8 of 63 FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Duty Cycle NVNT n(HT20) 2462MHz Ant1 Duty Cycle NVNT n(HT40) 2422MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0134-14 Page: 9 of 63 FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Duty Cycle NVNT n(HT40) 2437MHz Ant1 Duty Cycle NVNT n(HT40) 2452MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202305-0134-14 Page: 10 of 63 FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT b 2412 Ant1 17.645 30 Pass NVNT b 2437 Ant1 17.022 30 Pass NVNT b 2462 Ant1 17.487 30 Pass NVNT g 2412 Ant1 12.135 30 Pass NVNT g 2437 Ant1 12.451 30 Pass NVNT g 2462 Ant1 12.890 30 Pass NVNT n(HT20) 2412 Ant1 12.441 30 Pass NVNT n(HT20) 2437 Ant1 11.750 30 Pass NVNT n(HT20) 2462 Ant1 12.267 30 Pass NVNT n(HT40) 2422 Ant1 10.720 30 Pass NVNT n(HT40) 2437 Ant1 10.693 30 Pass NVNT n(HT40) 2452 Ant1 11.105 30 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixia…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202305-0134-14 Page: 1 of 46 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2AKUR-IQ3 Report No. : TBR-C-202305-0134-14 Applicant : Hangzhou Jufeng Technology Co., Ltd. Equipment Under Test (EUT) EUT Name : FPT Camera Model No. : FPT Camera IQ3 Series Model No. : ---- Brand Name : FPT Sample ID : 202305-0134-7-1# & 202305-0134-7-2# Receipt Date : 2023-05-22 Test Date : 2023-05-22 to 2023-07-13 Issue Date : 2023-07-21 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Witness Engineer : Wade. Lv Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202305-0134-14 Page: 2 of 46 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode .................................................................................................... 7 1.6 Description of Test Software Setting ................................................................................ 9 1.7 Measurement Uncertainty .................................................................................................. 9 1.8 Test Facility ......................................................................................................................... 10 2. TEST SUMMARY ..................................................................................................................... 11 3. TEST SOFTWARE ................................................................................................................... 11 4. TEST EQUIPMENT .................................................................................................................. 12 5. CONDUCTED EMISSION TEST ........................................................................................... 16 5.1 Test Standard and Limit .................................................................................................... 16 5.2 Test Setup ........................................................................................................................... 16 5.3 Test Procedure ................................................................................................................... 16 5.4 Deviation From Test Standard ......................................................................................... 17 5.5 EUT Operating Mode ........................................................................................................ 17 5.6 Test Data ............................................................................................................................. 17 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 18 6.1 Test Standard and Limit .................................................................................................... 18 6.2 Test Setup ........................................................................................................................... 20 6.3 Test Procedure ................................................................................................................... 21 6.4 Deviation From Test Standard ......................................................................................... 22 6.5 EUT Operating Mode ........................................................................................................ 22 6.6 Test Data ............................................................................................................................. 22 7. RESTRICTED BANDS REQUIREMENT ............................................................................. 23 7.1 Test Standard and Limit .................................................................................................... 23 7.2 Test Setup ........................................................................................................................... 23 7.3 Test Procedure ................................................................................................................... 24 7.4 Deviation From Test Standard ......................................................................................... 25 Report No.: TBR-C-202305-0134-14 Page: 3 of 46 TB-RF-074-1.0 7.5 EUT Operating Mode ........................................................................................................ 25 7.6 Test Data ............................................................................................................................. 25 8. BANDWIDTH TEST ................................................................................................................. 26 8.1 Test Standard and Limit ....................................…

Text truncated - open the document above for the full version.

version01 Hangzhou Jufeng Technology Co., Ltd. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: FPT Camera IQ3 FCC ID: 2AKUR-IQ3 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for FPC antenna type(s) described below: Antenna No. Model No. of antenna: Type of antenna: Gain of the antenna (Max.) Frequency range: 2.4G WIFI YJC-6N060-B112 FPC Antenna 4.06dBi for 2400-2500MHz; The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Hangzhou Jufeng Technology Co., Ltd. Address: Building 9, Yinhu Innovation Center, No.9 FuXian Road, YinHu Street, Hangzhou, China Place: Fang Lai Date: 2023-7-21 Signature:

Shenzhen yingjiachuang Electronic Co.,Ltd http://www.szsyjc.com USTOMERNAME CUSTOMERP/N PARTNAME P/N YJC-6N060-B112 APPROVALREV. A0 2022.12.01 黄腾 DELIVERYDATE PREPAREDBY CHECKEDBY 伍龙飞 APPROVEDBY CustomerApproved CheckedBy PreparedBy 承 ApprovedBy Headerquarter address: building C, Hongyu guangming valley, No.11 You Magang Road, Ma Tian Street, GuangMing District, ShenZhen Dongwan branch factory address：Ying Jiachuang industrial Park, No.3 Yinhe Road, shikou, Qiaotou Town, Dongwan City Hangzhou agency: building B, Dahua Jianghong international Innovation Park,No.369 internet of Things Street, Binjiang Dstrict, Hangzhou Mianyang agency: No.34, 4F, Vientiane High tech internation, No.35, Mianxing East Road, Gaoxing District, Mianyang City, Sichuan Province phonenumber：0755-27810060 fax：0755-27810057 website：www.szsyjc.com Shenzhen yingjiachuang Electronic Co.,Ltd http://www.szsyjc.com 1、cover·················································································1 2、content··············································································2 3、revised resume···································································3 4、Antenna plane figure··························································4 5、Antenna technical parameter················································5 6、environment performance testing·········································5 7、Antenna physical figure and attached location figure··········6 8、Antenna performance testing figure·······································6 9、OTA active test data statistics ···································7 10、 2D、3D testing data······················································8-10 11、 ROHS material report·····················································11 Shenzhen yingjiachuang Electronic Co.,Ltd http://www.szsyjc.com Revised resume version first version publish date publish A/0 2023.03.16 Shenzhen yingjiachuang Electronic Co.,Ltd http://www.szsyjc.com Shenzhen yingjiachuang Electronic Co.,Ltd http://www.szsyjc.com Electronic equipment technical parameter 电性能指标 2400~2500MHz ＜1.92 Electrical Specifications 频率范围 电压驻波比 输入阻抗 方向 Frequency Range VSWR 2400~2500MHz ＜1.92 50 Ω 50 Ω Input Impedance Direction 全向 All 增益 4.06dBi Gain 4.06dBi 机械指标 Mechanical Specifications Antenna Color White 天线颜色 接口形式 白色 二代线端 Inputconnector WireLength XD（II） 60MM 线材长度 工作温度 工作湿度 60MM -40°C~+90°C 20~80% Working Temperature -40°C~+90°C Working Humidity 20~80% Environment performance testing: project test condition specification test tempearture, humidity, and air pressure without specifying as fellows： 1.temperature: -30°C～+80°C Storage environment Electronic mechanical performance is normal 2.relative humidity 45%-85% 3.air pressure:86kpa- 106kpa High & low temperature test Between -20°C and 70°C go on 5 loop and in normal condition after 1 hour - 2 hours checking appearance quality The size should meet the regulations and the mechanical and elecrical performance requirements Relative humidity:95±3%，experiment temperature：40°C.after two hous testing， ，and check its appearance after 1-2 h in normal condition Constant Damp Heat Resistance Experiment Oscillation range:10-55HZ，shifting amplitude： 0.35MM，acceleration：50.0M/S，sweep loop frequency：30 times Vibrate experiment Electrical mechanical performance is normal Free fall from 1 meter height in the direction of mutually vertical axes for 3 times The size should meet the regulations and the mechanical and elecrical performance requirements Shenzhen yingjiachuang Electronic Co.,Ltd http://www.szsyjc.com Antenna figure: Antenna performance figure： Shenzhen yingjiachuang Electronic Co.,Ltd http://www.szsyjc.com OTA active test data statistics Item Measurement Band Channel Frequency Max Min Total 1 TRP WIFI_B (11M) 1 2412 17.68 8.73 15.75 2 3 TRP TRP WIFI_B (11M) WIFI_B (11M) 6 11 1 2437 2462 2412 2437 2462 2412 2437 2462 2412 2437 2462 2412 2437 2462 2412 2462 2412 17.92 18.68 -66.15 -65.09 -66.25 15.76 16.27 16.8 8.81 9.84 15.71 16.25 -73.14 -71.9 4 TIS(EIRP) TIS(EIRP) TIS(EIRP) TRP WIFI_B (11M) -75.05 -74.1 -75.26 6.9 5 WIFI_B (11M) 6 6 WIFI_B (11M) 11 1 -72.8 7 WIFI_G (6M) 13.92 14.03 14.34 -57.22 -58.38 -60.16 10.15 13.29 13.84 -43.63 -53.65 -55.42 8 TRP WIFI_G (6M) 6 7.14 9 TRP WIFI_G (6M) 11 1 7.71 10 11 12 13 14 15 16 17 18 TIS(EIRP) TIS(EIRP) TIS(EIRP) TRP WIFI_G (54M) -50.21 -51.49 -53.47 14.53 16.19 16.91 -24.02 -36.26 -31.82 -59.08 -60.62 -62.63 -8.44 -2.86 -6.69 -47.33 -56.54 -58.50 WIFI_G (54M) 6 WIFI_G (54M) 11 1 WIFI_N_ISM (6.5M) WIFI_N_ISM (6.5M) WIFI_N_ISM (6.5M) WIFI_N_ISM (65M) WIFI_N_ISM (65M) WIFI_N_ISM (65M) TRP 6 TRP 11 1 TIS(EIRP) TIS(EIRP) TIS(EIRP) 6 11 Shenzhen yingjiachuang Electronic Co.,Ltd http://www.szsyjc.com 2D.3D（2.4G）testing data： Frequency 2400MHz 2410MHz 2420MHz 2430MHz 2440MHz 2450MHz 2460MHz 2470MHz 2480MHz 2490MHz 2500MHz Efficiency(%) Gain.(dBi) 61.64 68.66 65.70 69.79 60.11 69.99 66.25 66.43 60.96 63.38 3.44 3.98 3.38 4.06 3.19 3.45 3.60 3.59 3.30 3.82 60.28 3.24 （Phi 0 2D figure） Shenzhen yingjiachuang Electronic Co.,Ltd http://www.szsyjc.com （Phi 90 2D figure） （Theta 90 2D figure） Shenzhen yingjiachuang Electronic Co.,Ltd http://www.szsyjc.com 3D testing figure （3D 2400MHz） （3D 2450MHz） （3D 2500MHz） Shenzhen yingjiachuang Electronic Co.,Ltd http://www.szsyjc.com Shenzhen yingjiachuang Electronic Co.,Ltd http://www.szsyjc.com material RoHS table for declaration of conformity This is to certify that the components, auxiliary materials used, and additives used in production engineering delivered to your company comply with the environmental requirements of the RoHS Restriction on on the Use of Hazardous Substances Directive（RoHS command 2011/65/EC） The report on the composition of raw materials, packaging materials, and additives used in the production process for components and auxiliary materials is as follows： Component /Part Name Material ppm PASS? ICP report # Test Org. Test Date Composition Cd ND ND ND ND ND Pb ND ND 43 17 ND Hg ND ND ND ND N…

Text truncated - open the document above for the full version.

FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID: 2AKUR-IQ3 TB-RF-074-1.0 Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Conducted Emission -----END OF THE REPORT-----