2AL7V-2003AWiFi IP Camera

Reolink Argus 3 Operational Instruction EN/DE/FR/IT/ES April, 2020 QSG1_A Technical Support If you need help, please contact Reolink before returning your product. Most questions can be answered through our online support center at https://support.reolink.com. Technische Unterstützung Wenn Sie Hilfe brauchen, kontaktieren Sie bitte Reolink Support Team zuerst, bevor Sie Ihre Bestellung zurücksenden.Meiste Fragen oder Probleme können von unserem Online Support Center beantwortet und gelöst werden: https://support.reolink.com. Support technique Si vous avez besoin d’aide, veuillez contacter Reolink avant de retourner votre produit. La plupart des questions peuvent être répondues via notre centre de support en ligne à l'adresse https://support.reolink.com. Supporto Tecnico Se avete bisogno di aiuto, le chiediamo gentilmente di contattare Reolink prima di restituire il prodotto.La maggior parte delle domande può essere risolta tramite il nostro centro di assistenza online all'indirizzo https://support.reolink.com. Soporte técnico Si necesita ayuda, comuníquese con Reolink antes de devolver su producto. La mayoría de las preguntas se pueden responder a través de nuestro centro de soporte en línea en https://support.reolink.com. SHENZHEN BAICHUAN SECURITY TECHNOLOGY CO., LTD. 2-4th Floor, Building 2, YuanLing Industrial Park, ShangWu, Shiyan Street, Bao'an District, Shenzhen, China https://reolink.com https://support.reolink.com [email protected] Pettenkoferstraße 18,10247,Berlin,Germany BellaCocool GmbH REP General Introduction Contents What’s in the Box What’s in the Box General Introduction Set up Camera via Reolink App on Smartphone Add the Camera to Reolink Client on PC Notes on Camera Installation Charge the Battery Mount the Camera Troubleshooting Specifications Notification of Compliance 1 2 3 4 5 8 10 13 14 14 Camera ×1 Outdoor Security Mount ×1 Magnet & Base x1 Micro USB Cable ×1 Surveillance Sign ×1 Quick Start Guide ×1 Mounting Hole Template ×2 Reset Needle ×1 Pack of Screws ×1 EN 2English 1English Micro USB power port Speaker Lens Status LED Daylight Sensor Press for more than five seconds to restore the device to factory settings. Built-in Mic PIR Motion Sensor Power Switch Reset Button Spotlight Micro SD card slot The LED in Red (WiFi connection failed) Blinking: Standby status On: Working status The LED in Blue (WiFi connection succeeded) Blinking: Standby status On: Working status Battery Status LED 4English 3English Set up Camera Via Reolink App on Smartphone Add the Camera to Reolink Client on PC After setting up the camera, you can add it to Reolink Client and access the camera on your PC. Here is a detailed how-to guide: 1. Download and install the Reolink Client from Reolink official website: https://reolink.com/software-and-manual/ 2. Launch Reolink Client, click “ ” on the far right side of the menu bar to add the device. Next, choose "Scan Device in LAN". 3. Double click on the camera you want to add. NOTICE: If the computer is not under the same LAN of the camera, you need to choose “UID” and type in the information to add the device. Available on the Get it on Add New Device Menu Device Settings Live View Enable/Disable PIR Motion Sensor (The PIR sensor is enabled by default.) To set up Reolink camera, please follow the steps below: 1. Download and install the Reolink App on App Store (for iOS) or Google Play (for Android). 2. Power on the camera. 3. Launch the Reolink App, click the “ ” button on the top right side and scan the QR code to add the camera. Then, follow the onscreen instructions and camera voice prompts to complete the setup procedure. 4. Input the password that you created via Reolink App earlier. 5. Click “OK” to log in. NOTICE: To save power, the camera will be logged out automatically if no operation is conducted for about five minutes. Once it is logged out, you have to log in again by clicking the “ ” button. NOTICE: • Reolink Argus 3 camera only supports 2.4 GHz Wi-Fi. 5 GHz is not supported. • Your family can click "Access Camera" for live view after the initial setup. Battery Status • PIR Sensor Detecting Range • Find the Best Spot for the Camera The PIR detection range can be customized to meet your specific needs. You can refer to the following table to set it up in the Reolink App. NOTICE: The path to adjust the Sensitivity on Reolink App: Device Settings-> PIR Settings-> Sensitivity. Please install the camera 2-3 meters (7-10 ft) above the ground. The detection range of the motion sensor would be maximized at such a height. For effective motion detection, please install the camera angularly and the angle between the PIR sensor and the detected object must be larger than 10°. NOTICE: Due to the limitation of PIR sensor detection, if a moving object approaches the PIR sensor vertically (the direction of the orange arrow in the image), the camera may fail to detect motion. Notes on Camera Installation 6English 5English B θ Mounting Height: 2-3 Meters PIR Detecting Distance: 2-10 Meters A Sensitivity High Mid Low Up to 10 meters (33ft) Up to 6 meters (20ft) Up to 4 meters (13ft) Value 81 - 100 51 - 80 0 - 50 Detecting Distance ( For moving and living objects) ! To reduce false alarms, please note that: • Do not face the camera towards any objects with bright lights, including sunshine, bright lamp lights, etc. • Do not place the camera too close to a place with heavy traffic. Based on our numerous tests, the recommended distance between the camera and the vehicle is 16 meters (52ft). • Do not place the camera near any outlets, including air conditioner vents, humidifier outlets, heat transfer vents of projectors, etc. • Do not install the camera at places with strong wind. • Do not face the camera towards any mirror. • Keep the camera at least 1 meter away from any wireless devices, including Wi-Fi routers and phones to avoid wireless interference. Important Notes on Reducing False Alarms 8English 7English ! NOTICE: The battery is a built-in…

Text truncated - open the document above for the full version.

Shenzhen Reo-link Digital Technology Co., Ltd Agent Authorization Company: Shenzhen Reo-link Digital Technology Co., Ltd Address: 11th Floor, Building C, Unisplendour Information Harbour, North High-Tech Zone, Nanshan District, Shenzhen, China, 518057 Product Name: WiFi IP Camera Model Number(s): Reolink Argus 3, RLC-410-5MP, RLC-520, RLK8-410B4-5MP, RLK8-520D4-5MP, RLK16-410B8-5MP Trademark: We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020/06/22 Name: Wang Aijun Title: Manager Company: Shenzhen Reo-link Digital Technology Co., Ltd

Shenzhen Reo-link Digital Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020/6/22 Subject; Request for Confidentiality FCC ID: 2AL7V-2003A To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Wang Aijun Title: Manager

External Photos

40*15mm WiFi IP Camera Model No.: Reolink Argus 3 FCC ID: 2AL7V-2003A IC: 22869-2003A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause unde sired operation. Label Location

Internal Photos Antenna

FCC 15C§2.1091 – RF Exposure FCC ID: 2AL7V-2003A Applied procedures / limit According to FCC §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna,R=20cm π=3.142 Test Result of RF Exposure Evaluation Target power W/ tolerance (dBm) Max tune up power tolerance (dBm) Total Output power to antenna (mW) Antenna Gain(dBi) Antenna Gain Numeric Total Pow er Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b 10±1.0 11 12.59 2.25 1.68 0.00421 1.000 Pass

Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2006000301E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.：A.0 Page 1 of 56 FCC Part 15C Test Report FCC ID: 2AL7V-2003A Product Name: WiFi IP Camera Trademark: Model Name : Reolink Argus 3 Prepared For : Shenzhen Reo-link Digital Technology Co., Ltd Address : 11th floor, Building C, Unisplendour Information Harbour, North High-Tech Zone, Nanshan District, Shenzhen, China, 518057 Prepared By : Shenzhen BCTC Testing Co., Ltd. Address : BCTC Building & 1-2F, East of B Building, Pengzhou Industrial, Fuyuan 1st Road, Qiaotou Community, Fuyong Street, Bao’an District, Shenzhen, China Test Date: Jun. 03, 2020 – Jun. 10, 2020 Date of Report : Jun. 11, 2020 Report No.: BCTC2006000301E Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2006000301E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.：A.0 Page 2 of 56 TEST RESULT CERTIFICATION Applicant’s name ................. : Shenzhen Reo-link Digital Technology Co., Ltd Address ................................. : 11th floor, Building C, Unisplendour Information Harbour, North High-Tech Zone, Nanshan District, Shenzhen, China, 518057 Manufacture's Name ............ : SHENZHEN BAICHUAN SECURITY TECHNOLOGY CO., LTD. Address ................................. : 2-4th Floor, Building 2, YuanLing Industrial Park, ShangWu, Shiyan Street, Bao'an District, Shenzhen, China Product description Product name ........................... : WiFi IP Camera Trademark ................................. : Model and/or type reference : Reolink Argus 3 Standards ............................. : FCC Part15.247 ANSI C63.10:2013 558074 D01 15.247 Meas Guidance v05r02 This device described above has been tested by BCTC, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of BCTC, this document may be altered or revised by BCTC, personal only, and shall be noted in the revision of the document. Prepared by(Engineer): Cai Fang Zhong Reviewer(Supervisor): Eric Yang Approved(Manager): Zero Zhou Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2006000301E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.：A.0 Page 3 of 56 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 5 1.1 TEST FACILITY 6 1.2 MEASUREMENT UNCERTAINTY 6 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST MODES 8 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 9 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 9 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 10 3 . EMC EMISSION TEST 12 3.1 CONDUCTED EMISSION MEASUREMENT 12 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 12 3.1.2 TEST PROCEDURE 12 3.1.3 DEVIATION FROM TEST STANDARD 12 3.1.4 TEST SETUP 13 3.1.5 EUT OPERATING CONDITIONS 13 3.1.6 TEST RESULTS 14 3.2 RADIATED EMISSION MEASUREMENT 16 3.2.1 RADIATED EMISSION LIMITS 16 3.2.2 TEST PROCEDURE 17 3.2.3 DEVIATION FROM TEST STANDARD 17 3.2.4 TEST SETUP 17 3.2.5 EUT OPERATING CONDITIONS 18 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 19 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 20 3.2.8 TEST RESULTS (1GHZ~25GHZ) 22 3.3 RADIATED BAND EMISSION MEASUREMENT 25 3.3.1 TEST REQUIREMENT: 25 3.3.2 TEST PROCEDURE 25 3.3.3 DEVIATION FROM TEST STANDARD 26 3.3.4 TEST SETUP 26 3.3.5 EUT OPERATING CONDITIONS 26 4 . POWER SPECTRAL DENSITY TEST 28 4.1 APPLIED PROCEDURES / LIMIT 28 4.1.1 TEST PROCEDURE 28 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2006000301E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.：A.0 Page 4 of 56 Table of Contents Page 4.1.2 DEVIATION FROM STANDARD 28 4.1.3 TEST SETUP 28 4.1.4 EUT OPERATION CONDITIONS 28 4.1.5 TEST RESULTS 29 5 . BANDWIDTH TEST 35 5.1 APPLIED PROCEDURES / LIMIT 35 5.1.1 TEST PROCEDURE 35 5.1.2 DEVIATION FROM STANDARD 35 5.1.3 TEST SETUP 35 5.1.4 EUT OPERATION CONDITIONS 35 5.1.5 TEST RESULTS 36 6 . PEAK OUTPUT POWER TEST 42 6.1 APPLIED PROCEDURES/LIMIT 42 6.1.1 TEST PROCEDURE 42 6.1.2 DEVIATION FROM STANDARD 42 6.1.3 TEST SETUP 42 6.1.4 EUT OPERATION CONDITIONS 42 6.1.5 TEST RESULTS 43 7 . 100 KHZ BANDWIDTH OF FREQUENCY BAND EDGE 44 7.1 APPLICABLE STANDARD 44 7.2 TEST PROCEDURE 44 7.3 DEVIATION FROM STANDARD 44 7.4 TEST SETUP 44 7.5 EUT OPERATION CONDITIONS 44 7.6 TEST RESULTS 44 8 . DUTY CYCLE OF TEST SIGNAL 51 8.1 STANDARD REQUIREMENT 51 8.2 FORMULA: 51 9 . ANTENNA REQUIREMENT 53 9.1 STANDARD REQUIREMENT 53 9.2 EUT ANTENNA 53 10 . EUT TEST PHOTO 54 11 . EUT PHOTO 56 Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2006000301E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.：A.0 Page 5 of 56 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247 (a)(2) 6dB Bandwidth PASS 15.247 (b) Peak Output Power PASS 15.247 (d) Radiated Spurious Emission PASS 15.247 (e) Power Spectral Density PASS 15.205 Restricted Band of Operation PASS 15.247 (d) Band Edge (Out of Band Emissions) PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2006000301E Test Report Tel: 400-788-9558 Web: https://www.bctc-lab.com BCTC/RF-EMC-007 Ver.：A.0 Page 6 of 56 1.1 TEST FACILITY Shenzhen BCTC Testing Co., Ltd. Add. : BCTC Building & 1-2F, East of B Building, Pengzhou Industrial, Fuyuan 1st Road, Qiaotou Community, Fuyong Street, Bao’an District, Shenzhen, China FCC Test Firm Registration Number: 712850 IC Registered No.: 23583 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximate…

Text truncated - open the document above for the full version.

Shenzhen BCTC Testing Co., Ltd. Conducted Measurement Photos Shenzhen BCTC Testing Co., Ltd. Radiated Measurement Photos