2ALXL-P9IMUZEN Mini Handbag Portable Bluetooth Speaker

[email protected] www.muzenaudio.com Product User Manual MUZEN Mini Handbag Portable Bluetooth Speaker Thank you very much for using our product. This product is a new portable Bluetooth speaker launched by MUZEN, which inherits the company’s design philosophy of "Aesthetically pleasing, Great sound, User-friendly and Entertaining", enabling you to connect with music and sound content more conveniently and simply. This speaker is powered by batteries. For a better experience, you are recommended to charge it for about two hours in the OFF state prior to using it. Dear users: EN JA 繁 Packing List Packing List 1Main unit ｘ 1 Tag ｘ 1 Product manual ｘ 1 USB cable ｘ 1 2 3 4 ① Bluetooth indicator: Blinking of the warm white indicator: Bluetooth connection is available. Steady on of the warm white indicator: The device has been connected. ② Power switch/Volume control/Recording control: Power on: Long press the button for 3 seconds. Power-off: Long press the button for 3 seconds. Volume up: Turn the button clockwise. Volume down: Turn the button counterclockwise. Recording deletion: Short press the button 3 times to delete the archived recording. Bluetooth reset: Short press the button 5 times. Recording: Short press the button 2 times to record for 30 seconds and re-short press the button 2 times to end the recording. (Note: Please start recording after the prompt tone is over to avoid incomplete recording.) Recording playback: Short press the button once to play the recording. Operation Instructions of the Main Unit EN JA 繁 EN JA 繁 1 2 3 4 Hardware Parameters Product model: MW-P9I Product dimensions: 60.5 mm×33.6 mm×72.6 mm Net weight of the product: 68.2 g Bluetooth: Bluetooth 5.0 Bluetooth connection distance: 5m≤Distance≤10m Loudspeaker: 4Ω 3W Amplifier power: 3W To ensure safety, please carefully read and follow the following safety instructions: 1. The manufacturer has the right to modify or adjust the specifications and details of this product without notifying the user. 2. Please use this product in a dry environment. 3. Keep this product away from exposed sources of fire. 4. Be sure to use this product in an environment where the ambient temperature is 0-45 °C. Do not use this product beyond this environmental condition. 5. Do not modify, repair or remove this product without authorization. Precautions ③ Speaker: for playing music (** Note: This part is fragile. Please do not press it hard.) ④ TYPE-C charging port: It is located under the clamshell and is used to charge the device. ⑤ Charging indicator: It is located below the clamshell. The red indication is on when the speaker is being charged, and the green indicator is on when the speaker has been fully charged. EN JA 繁 EN JA 繁 Signal to noise ratio: ＞70 dB System frequency response: 120 Hz~20 KHz MIC use distance: ≤ 0.05m (** Note: This distance applies to quiet surrounding environment.) Battery: 3.7 V/400 mAh Charging port: TYPE-C Charging voltage: DC 5V 1A We provide one year of free warranty service for the hardware of this product. For service details, please visit www.muzenaudio.com or contact our local distributors. E-mail: [email protected] Manufacturer: Shenzhen Airsmart Technology Co., Ltd. Address: 12/F, Building A, Guangqi Future Center, No.88 Gaoxin South 4th Rd, Yuehai Street, Nanshan, Shenzhen, PRC. Warranty Description EN JA 繁 EN JA 繁 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which Otherwise, you may not enjoy the warranty service. 6. The approval number is displayed on the back of the product. 7. Note that improper battery replacement may cause a risk of explosion. If necessary, please go to a professional maintenance point for battery replacement. After the battery is replaced, you will no longer enjoy the warranty service. the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. お買い上げいただき、ありがとうございます、今度は新しいポータブルBluetoothス ピーカー製品を立ち上げ、猫王ラジオに付着している見て良し、聴いて良し、使って 良し、遊んで良し製品体験を一貫して、より便利で簡単に音楽やサウンドコンテンツ を楽しくお使いいただけるものと考えます。 バッテリーを使用しておりますので、お手元に届きましたら、より快適にご使用いた だくために、オフの状態で2時間程度充電してからご使用ください。 ユーザーの皆様： パッキングリスト 1 本体 ｘ 1 ハングタグ ｘ 1 製品マニュアル ｘ 1 データケーブル ｘ 1 2 3 4 EN JA 繁 EN JA 繁 パッキングリスト 1 2 3 4 操作方法 EN JA 繁 EN JA 繁 ①Bluetoothランプ 温白色点滅：Bluetooth接続可能 温白色常時点灯：Bluetoothが接続されています ②電源オン&オフ/ボリュームコントロール/録音コントロール 電源オン：ボタン3秒長押し 電源オフ：ボタン3秒長押し ボリュームアップ：時計回りに回す ボリュームダウン：反時計回りに回す 録画削除：3回短く押すとアーカイブされた録画が削除されます Bluetoothリセット：短押し5回 録音：短押し2回、録音機能を入力し、30秒間録音することができ、録音を終了するには、 短押し2回。 (ヒント：不完全な録音を避けるために、ウオーニングトーンが終了した後に記録してくだ さい) 録音のプレーバック：短い1回、録音のプレーバック機能を書き入れます 製品モデル：MW-P9I 製品サイズ：60.5mm×33.6mm×72.6mm 重量：68.2g Bluetooth：5.0 接続距離：5メートル≤距離≤10メートル スピーカー：4Ω 3W アンプ出力：3W ノイズキャン…

Text truncated - open the document above for the full version.

, MW-SR1I, MW-SR2I, MW-KS1I, MW-P3I, MW-P10I, MW-P11I

FRN:0033649385

FRN:0033649385

Shenzhen Airsmart Technology Co., Ltd. 12/F, Building A, Guangqi Future Center, No.88 Gaoxin South 4th Rd, Yuehai Street, Nanshan, Shenzhen, China Product Similarity Declaration Product name: MUZEN Mini Handbag Portable Bluetooth Speaker Model name: MW-P9I, MW-SR1I, MW-SR2I, MW-KS1I, MW-P3I, MW-P10I, MW-P11I FCC ID: 2ALXL-P9I We (Shenzhen Airsmart Technology Co., Ltd.) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature: Name: Dejun Zeng Title: General Manager Date: Mar. 04, 2024

Shenzhen Airsmart Technology Co., Ltd. 12/F, Building A, Guangqi Future Center, No.88 Gaoxin South 4th Rd, Yuehai Street, Nanshan, Shenzhen, China 1/1 Letter of Authorization Company: Shenzhen Airsmart Technology Co., Ltd. Address: 12/F, Building A, Guangqi Future Center, No.88 Gaoxin South 4th Rd, Yuehai Street, Nanshan, Shenzhen, China Product Name: MUZEN Mini Handbag Portable Bluetooth Speaker Model Number: MW-P9I, MW-SR1I, MW-SR2I, MW-KS1I, MW-P3I, MW-P10I, MW-P11I FCC Identifier: 2ALXL-P9I We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Dejun Zeng Date: Mar. 04, 2024 Title: General Manager Signature of applicant:

Report No.: AGC04316240101AP03 Page 1 of 4 EXTERNAL PHOTOS WHOLE VIEW OF EUT TOP VIEW OF EUT Report No.: AGC04316240101AP03 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC04316240101AP03 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC04316240101AP03 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 10mm*20mm FCC ID: 2ALXL-P9I

Report No.: AGC04316240101AP03 Page 1 of 3 INTERNAL PHOTOS VIEW OF EUT(PORT) OPEN VIEW OF EUT Report No.: AGC04316240101AP03 Page 2 of 3 VIEW OF BATTERY INTERNAL VIEW OF EUT (FIGURE 1) BT Antenna Report No.: AGC04316240101AP03 Page 3 of 3 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) ****************************************End of Report*************************************

Page 1 of 10 RF Exposure Report Report No.: AGC04316240101FH01 FCC ID : 2ALXL-P9I APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : MUZEN Mini Handbag Portable Bluetooth Speaker BRAND NAME : MUZEN MODEL NAME : MW-P9I, MW-SR1I, MW-SR2I, MW-KS1I, MW-P3I, MW-P10I, MW-P11I APPLICANT : Shenzhen Airsmart Technology Co., Ltd. DATE OF ISSUE : Mar. 04, 2024 STANDARD(S) : FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC04316240101FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 04, 2024 Valid Initial Release Report No.: AGC04316240101FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC04316240101FH01 Page 4 of 10 1. General Information Applicant Shenzhen Airsmart Technology Co., Ltd. Address 12/F, Building A, Guangqi Future Center, No.88 Gaoxin South 4th Rd, Yuehai Street, Nanshan, Shenzhen, China Manufacturer Shenzhen Airsmart Technology Co., Ltd. Address 12/F, Building A, Guangqi Future Center, No.88 Gaoxin South 4th Rd, Yuehai Street, Nanshan, Shenzhen, China Factory N/A Address N/A Product Designation MUZEN Mini Handbag Portable Bluetooth Speaker Brand Name MUZEN Test Model MW-P9I Series Model(s) MW-SR1I, MW-SR2I, MW-KS1I, MW-P3I, MW-P10I, MW-P11I Difference Description All the same except for the model name. Date of receipt of test item Jan. 31, 2024 Date of Test Jan. 31, 2024 to Mar. 04, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Thea Huang (Project Engineer) Mar. 04, 2024 Reviewed By Calvin Liu (Reviewer) Mar. 04, 2024 Approved By Max Zhang (Authorized Officer) Mar. 04, 2024 Report No.: AGC04316240101FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version V0.1 Software Version V0.1 Modulation Type BR GFSK, EDR π /4-DQPSK, 8DPSK Maximum Transmitter Power -3.835dBm Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation Ceramic Antenna Antenna Gain 3.54dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC04316240101FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC04316240101FH01 Page 7 of 10 3.3 Environmental Conditions NORMAL CONDITIONS Temperat…

Text truncated - open the document above for the full version.

SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. 1 深圳市飞敏科技有限公司 ShenZhen FeiMin Technology CO.,LTD. 产品规格书 Product specification 客户 CUSTOMER: 产品名称 PRODUCTS: D3 chip antenna 客户料号 PART NO: 产品型号 Spec.:E.6.041 日期 Data:2023.08.16 备注：承认盖章后请回复一份承认书（或复印件）给我司，其余由贵公司存档 REMARK:Please send us one(or copy)of this approval with stamp after accepting,other copies filed by the customer. 地址：深圳市宝安区西乡街道固戍社区恒南一路C栋厂房303室 ADD:Room 303,Building C,Hengnan one Road,Gushu community,Xixiang Street,Bao’an District,Shenzhen City 电话Tel: 0755-23035723传真Fax: 0755-23036702 邮箱E-mail: [email protected]网址HTTP: www.fmant.cn 客户 CUSTOMER 承认 ACCEPTED BY 审核 CHECKED BY 批准 APPROVED BY 供应商 SUPPLIER 拟制 PREPARED BY 审核 CHECKED BY 批准 APPROVED BY 马凡 夏兴喜马冬冬 SHENZHENFEIMINTECHNOLOGYCO.,LTD. 深圳市飞敏科技有限公司 ShenzhenFeiminTechnologyCo.,Ltd2 2 1. 项目信息 ProjectInformation 1.1.外观尺寸AppearanceandDimensions SymbolDimension(mm) L（长度） 3.4±0.20 W（宽度） 1.7±0.20 T（厚度） 1.2±0.20 S（电极宽度） 0.4±0.20 SHENZHENFEIMINTECHNOLOGYCO.,LTD. 深圳市飞敏科技有限公司 ShenzhenFeiminTechnologyCo.,Ltd3 3 1.2.天线净空区面积antennaClearancearea 在设计天线时，应远离金属部件和不相关的部件，如电池、振荡器、防护罩、摄像头等，为天线留出 干净的空间。这个间隔简称为净空区。以下是我们建议预留的净空区面积大小。 Whendesigningtheantenna,itshouldbefarawayfrommetalcomponentsandirrelevant componentssuchasbatteries,oscillators,shields,cameras,etc.toleaveacleanspacefortheantenna. Thisintervaliscalledclearancearea.Thefollowingisthesizeofclearanceareawerecommendto reserve. 天线型号（Model） 天线尺寸 （size） 净空区面积 Clearancearea L*W(mm) A1（2.4G单极） 5.5*1.2*1.29.1*5.6 X5（2.4G单极） 5.2*2.2*1.08.7*6.5 X6（2.4Gpifa） 3.2*1.6*1.07.0*6.0 D1（2.4G单极） 5.2*2.2*1.08.7*6.5 D2（2.4G单极） 5.2*2.2*1.08.7*6.5 D3 （ 2.4G 单极） 3.4*1.7*1.27.2*6.0 F01（2.4Gpifa） 3.2*1.6*0.47.0*6.0 S2（2.4/5.8G双频） 7.0*3.0*2.09.0*7.0 U1(UHF单极） 15.0*3.0*1.019.0*8.0 G2（GPS单极） 9.5*3.0*1.013.5*7.5 SHENZHENFEIMINTECHNOLOGYCO.,LTD. 深圳市飞敏科技有限公司 ShenzhenFeiminTechnologyCo.,Ltd4 4 1.3.天线Demo测试板DemoTestBoardwithAntenna(Unit:mm) 1.4.建议PCB板尺寸布局SuggestedPCBboardsizelayout SHENZHENFEIMINTECHNOLOGYCO.,LTD. 深圳市飞敏科技有限公司 ShenzhenFeiminTechnologyCo.,Ltd5 5 1.5.匹配电路MatchingCircuit 使用以下推荐的匹配和调谐元件值，在我们的标准30*40mm评估板上，中心频率约为2440mhz。然 而，这些是典型的参考值，当电路板或零件供应商不同时，可能需要更改。 Withthefollowingrecommendedvaluesofmatchingandtuningcomponents,thecenter frequencieswillbeabout2440MHzatourstandard30*40mmevaluationboard.However,theseare typicalreferencevalueswhichmayneedtobechangedwhencircuitboardsorpartvendorsare diffierent. 2 31 2. 电特性 Electrical Characteristics(30*40mmgroundplane) 2.1.电子表格ElectricalTable 特征Characteristics规范Specifications单位Unit 轮廓尺寸OutlineDimensions 3.4*1.7*1.2mm 工作频率WorkingFrequency 2400-2500MHz 电压驻波比VSWR <2/ 阻抗Impedance 50 Ω 极化Polarization线极化 / 增益Gain 峰值Peak 3.54dBi 效率Efficiency 50% 系统匹配电路元件(村田) SystemMatchingCircuitComponent（Murata） LocationDesciptionTolerance 1NC/ 24.7nH(0402) ±0.2nH 32.0pF(0402) ±0.1pF SHENZHENFEIMINTECHNOLOGYCO.,LTD. 深圳市飞敏科技有限公司 ShenzhenFeiminTechnologyCo.,Ltd6 6 2.2.电压驻波比与回波损耗VSWR&returnloss VSWRreturnloss 2.3.天线增益与效率GainandEfficiency 测试系统Testsystem SHENZHENFEIMINTECHNOLOGYCO.,LTD. 深圳市飞敏科技有限公司 ShenzhenFeiminTechnologyCo.,Ltd7 7 2.4.天线辐射方向图Antennaradiationpattern Frequency(MHz)Gain(dBi)Efficiency(%) 2400MHz 2.5348.07 2410MHz 2.4246.87 2420MHz 2.6245.74 2430MHz 2.6047.41 2440MHz 2.8349.21 2450MHz 3.0449.87 2460MHz 3.3750.91 2470MHz 3.5151.95 2480MHz 3.5452.81 2490MHz 3.3951.34 2500MHz 3.3149.99 SHENZHENFEIMINTECHNOLOGYCO.,LTD. 深圳市飞敏科技有限公司 ShenzhenFeiminTechnologyCo.,Ltd8 8 [email protected]@2.44GHz [email protected]@2.44GHz 3. 焊接和安装SolderingandMounting SHENZHENFEIMINTECHNOLOGYCO.,LTD. 深圳市飞敏科技有限公司 ShenzhenFeiminTechnologyCo.,Ltd9 9 4. 包装信息 PackagingInformation 4.1.胶带规范Tapespecification Index A0B0K0P0PP2 φ D0 WEFT Dimension( mm) 2.0± 0.1 3.7± 0.1 1.5± 0.1 4.0± 0.1 4.0± 0.1 2.0± 0.1 1.5 +0. 1 12.0± 0.3 1.75± 0.1 3.7± 0.1 0.3± 0.05 1.10链轮孔距累积公差±0.20。10sprocketholepitchcumulativetolerance±0.20. 2.在250毫米中，载体的拱度在1毫米以内。Carriercamberiswithin1mmin250mm. 3.所有尺寸符合EIA-481-C要求。AlldimensionsmeetEIA-481-Crequirements. 4.材料:透明PS。Material:TransparentPS. 5.包装长度每7“卷:12.5米。Packinglengthper7"reel:12.5Meters. 6.组件加载/7”卷:3000个。Componentloadper7"reel:3000pcs.(前后共预留120pcs) 4.2.卷规范Reelspecification IndexABCD Dimension(mm)13.3±0.3100±0.3330±0.324.5±0.3 SHENZHENFEIMINTECHNOLOGYCO.,LTD. 深圳市飞敏科技有限公司 ShenzhenFeiminTechnologyCo.,Ltd10 10 5. 注意事项 Notes 1)产品应小心处理，以避免汗水和皮肤油脂损坏或污染。 Productsshouldbehandledwithcaretoavoiddamageorcontaminationfromperspirationandskinoils. 2)对于单个部件，强烈建议使用镊子或真空拾取。 Theuseoftweezersorvacuumpickupisstronglyrecommendedforindividualcomponents. 6. 储存条件 StorageConditions 1)推荐产品从交货之日起6个月内使用。 Recommendedproductsshouldbeusedwithin6monthsformthetimeofdelivery. 2)存储环境条件 Storageenvironmentcondition 温湿度条件:-10~40°C，30~70%RH。 Temperatureandhumidityconditions:-10~40°Cand30~70%RH. 包装材料应保存在空气中不含氯或硫的地方。 Thepackagingmaterialshouldbekeptwherenochlorineorsulfurexistsintheair. 产品应储存在仓库内，无热震、振动、阳光直射等。 Productsshouldbestorageinthewarehousewithoutheatshock,vibration,directsunlightandsoon.

Page 1 of 76 FCC Test Report Report No.: AGC04316240101FR01 FCC ID : 2ALXL-P9I APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : MUZEN Mini Handbag Portable Bluetooth Speaker BRAND NAME : MUZEN MODEL NAME : MW-P9I, MW-SR1I, MW-SR2I, MW-KS1I, MW-P3I, MW-P10I, MW-P11I APPLICANT : Shenzhen Airsmart Technology Co., Ltd. DATE OF ISSUE : Mar. 04, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC04316240101FR01 Page 2 of 76 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 04, 2024 Valid Initial Release Report No.: AGC04316240101FR01 Page 3 of 76 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies and Behaviour................................................................................ 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4.System Test Configuration ............................................................................................................................ 14 4.1 EUT Configuration ................................................................................................................................... 14 4.2 EUT Exercise ........................................................................................................................................... 14 4.3 Configuration of Tested System .............................................................................................................. 14 4.4 Equipment Used in Tested System ......................................................................................................... 14 4.5 Summary of Test Results ........................................................................................................................ 15 5. Description of Test Modes ........................................................................................................................... 16 6. RF Output Power Measurement .................................................................................................................. 17 6.1 Provisions Applicable .............................................................................................................................. 17 6.2 Measurement Procedure ......................................................................................................................... 17 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 17 6.4 Measurement Result ............................................................................................................................... 18 7. 20dB Bandwidth and 99% Occupied Bandwidth Measurement ............................................................... 24 7.1 Provisions Applicable .............................................................................................................................. 24 7.2 Measurement Procedure ......................................................................................................................... 24 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 24 7.4 Measurement Results ...........................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC04316240101FR01 Page 70 of 76 12. Frequency Separation Measurement 12.1 Provisions Applicable When the power is less than 0.125W: The minimum permissible channel separation for this system is 2/3 the value of the 20dB BW. When the power is less than 1W: The minimum permissible channel separation for this system is 20dB BW. 12.2 Measurement Procedure The EUT shall have its hopping function enabled. Use the following spectrum analyzer settings: 1. Span: Wide enough to capture the peaks of two adjacent channels. 2. RBW: Start with the RBW set to approximately 30% of the channel spacing; adjust as necessary to best identify the center of each individual channel. 3. Video (or average) bandwidth (VBW) ≥ RBW. 4. Sweep: Auto. 5. Detector function: Peak. 6. Trace: Max hold. g) Allow the trace to stabilize. 7. Use the marker-delta function to determine the separation between the peaks of the adjacent channels. 12.3 Measurement Setup (Block Diagram of Configuration) 12.4 Measurement Result Test Data of Frequency Separation Test Mode Channel Separation (MHz) Limits (MHz) Pass or Fail 8DPSK Hopping 1.001 ≥0.880 Pass Report No.: AGC04316240101FR01 Page 71 of 76 Test Graphs of Number of Hopping Frequency Test_Graph_EDR_HOP_ANT1_NA_3Mbps_Hopping Separation Note: The 8DPSK modulation is the worst case and recorded in the report. Report No.: AGC04316240101FR01 Page 72 of 76 13. AC Power Line Conducted Emission Test 13.1 Measurement Limit Frequency Maximum RF Line Voltage Q.P. (dBμV) Average (dBμV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 13.2 Measurement Setup (Block Diagram of Configuration) Report No.: AGC04316240101FR01 Page 73 of 76 13.3 Preliminary Procedure of Line Conducted Emission Test 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.10. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4. All support equipment received AC120V/60Hz power from a LISN, if any. 5. The EUT received DC 5V power from adapter which received AC120V/60Hz power from a LISN. 6. The test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 kHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation. 9. The test mode(s) were scanned during the preliminary test. Then, the EUT configuration and cable configuration of the above highest emission level were recorded for reference of final testing. 13.4 Final Procedure of Line Conducted Emission Test 1. EUT and support equipment was set up on the test bench as per step 2 of the preliminary test. 2. A scan was taken on both power lines, Line 1 and Line 2, recording at least the six highest emissions. Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. If EUT emission level was less – 2dB to the A.V. limit in Peak mode, then the emission signal was re-checked using …

Text truncated - open the document above for the full version.