2AM5N-ML2M2Magic Leap 2 Controller with BLE transceiver

DRAFT Magic Leap 2 Safety Guide & Regulatory Information Draft 1.0 Safety Guide Carefully read our Quick Start Guide at www.magicleap.com/quickstart and this Safety Guide at www.magicleap.com/safety before using Magic Leap 2. Failure to do so and follow the instructions in this Safety Guide may result in serious injury, property damage, or damage to the Magic Leap 2. This Magic Leap 2 Safety Guide (“Safety Guide”) is provided to reduce the risk of personal injury, physical discomfort, pain, health issues, and property damage relating to the Magic Leap 2 Headset, Compute Pack, or Controller (collectively “Magic Leap 2” or “Device”), as well as the Compute Pack charger, Controller charger, and other Magic Leap branded accessories sold by Magic Leap or its authorized resellers. Please ensure that all Magic Leap 2 users read and understand this Safety Guide before using the Device. For the full Device description, user agreements, Magic Leap policies, and our return and warranty policies, please visit www.magicleap.com. Changes Magic Leap may change or modify this Safety Guide from time to time to keep it accurate and complete. If we issue a new version of the Safety Guide, please discard your old copy and use the new one. We encourage you to review the Safety Guide and related information at www.magicleap.com/safety from time to time to ensure you are utilizing the latest version. Setting Up the Device Prior to Use.Prior to usingMagic Leap 2, you should read and follow all setup and operating instructions provided with the Device and on the Device. For example, be sure to go through the Fitting Guide and Visual Calibration, both of which you can access in Settings > Device > Calibration. Select “Run Fitting Guide” and “Run Visual Calibration” to begin. Fit.Make sure the Headset is level and fits comfortablyaround your head without pain or pressure. For more guidance, please use the Fitting Guide (in the Settings menu on the Device). Make sure you can see clearly through the Headset and the nose pad rests comfortably on the bridge of your nose. If the nose pad does not provide a good fit for the Headset, replace it with another size and go through the Fitting Guide again. If Visual Calibration fails, you may need to use the larger forehead pad. You can use the Fitting Guide to help you find the right nose and forehead pad sizes. Visit our Customer Care page at care.magicleap.com for steps on how to fit your Magic Leap 2. Visual Calibration.Adjust your Headset until youare able to see the full display, have successfully completed Visual Calibration, and are comfortable using the Device. If you do not pass the Visual Calibration, readjust your fit using the Fitting Guide and read the section below titled “Warning: Unsuccessful Visual Calibration.” For an optimal experience, we recommend that Magic Leap 2 is used by people with an interpupillary distance (the distance between your pupils, also known as “IPD”) between 54-76 millimeters. If you have an IPD outside that range, DRAFT 1 you may have a greater chance of experiencing visual pain or discomfort, and you may not have full visibility of the display. Volume.When you first use Magic Leap 2, start withthe volume at a low level and increase it until you can hear sounds clearly and comfortably. Avoid turning the volume up rapidly, especially if it becomes uncomfortable. Unsuccessful Visual Calibration.You may have an increasedchance of experiencing visual discomfort if you do not successfully complete the Visual Calibration. Magic Leap 2 relies on eye tracking to render content in a way that is designed to be comfortable for your eyes. Upon completing the Visual Calibration process, the Device will let you know if you were successful. Reasons to see a Physician Prior to Use.See yourphysician before using Magic Leap 2 if you: have any conditions that impair your vision (e.g., binocular vision disorder); mobility issues; are pregnant or elderly; or have a heart condition or other serious medical condition such as seizures or migraines. Intended Use.Magic Leap 2 is intended to providea safe spatial computing experience. This intended use requires you to have an unimpaired sense of balance and motion. Do not use Magic Leap 2 while you are fatigued, ill, experiencing symptoms of illness, are under emotional or physical stress, or are under the influence of alcohol or drugs. Unintended uses of the Device increase the likelihood of injury and property damage. Never use Magic Leap 2 while driving, cycling, operating heavy machinery, or operating any other moving vehicle. If any of the following occur while wearing the Device, the user should remove it immediately: ●The Device becomes too hot ●The Device causes discomfort ●If you think the Device may have been damaged ●Any dizziness or lightheadedness occurs DRAFT 2 WARNING: Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally. The MANUFACTURER of the ME EQUIPMENT or ME SYSTEM may provide a description or list of equipment with which the ME EQUIPMENT or ME SYSTEM has been tested in a stacked or adjacent configuration and with which stacked or adjacent use resulted in normal operation. Virtual Objects.Remember that Device-generated objectsyou see in your spatial computing environment do not exist in the physical world. Do not attempt to sit or stand on such objects or use them for support. Environment.Use Magic Leap 2 only in a comfortable,safe environment. Magic Leap 2 is designed for indoor use only. To reduce the risk of fire or shock, do not use Magic Leap 2 near water or liquid. Magic Leap 2 should only be used in environments where the ambient temperature is between 10 °C and 25 °C (50 °F and 77 °F). Obstructions.Magic Leap 2 produces an immersive spatialcomputing experience that may distract you…

Text truncated - open the document above for the full version.

DRAFT QUICK START GUIDE ML2 Safety User Guide (Rev. 4.1.2022) DRAFT What’s in the Box Your Magic Leap 2 for Enterprise box contains: ●Headset ●Compute Pack ●Controller ●Enterprise Charger - 2 x 45W USB-C charger and cables for Compute Pack and Controller ●Fit Kit for Headset. A set of nose pads and forehead pads to customize the fit ●Optional Overhead Strap to support in-motion use and slippage ●Frame with eye cups ●Shoulder strap for crossbody wearing ●Controller lanyard to attach to users wrist ●Carry Case and Cleaning Cloth, robust case to carry Headset, Compute Pack and Controller Pictured: Magic Leap 2 Headset, Compute Pack and Controller. DRAFT Attach Your Compute Pack to a Pocket... Slide the Compute Pack onto a pocket until it moves past the clip. Please don’t put the Compute Pack in a pouch or pocket while in use or block the vents. The Compute Pack easily clips onto your pocket. DRAFT ... Or to the Shoulder Strap Clip the carabiners on the Shoulder Strap to the corresponding fasteners on the Compute Pack. Get comfortable by adjusting the length. Fasten the carabiners on the ends of the Shoulder Strap to the Compute Pack to hold it into place. DRAFT Put on your Headset Gently stretch the back of your Headset headband until it comfortably fits over your head. For the best comfort and visual experience, rest the Headset around the widest part of your head. If necessary, insert required pads and nosepiece from the included Fit Kit for an individualized comfortable fit for you. The Headset adjusts to the width of your head by gently stretching the temples of DRAFT the device. Prevent Tangling the Cords Be sure to prevent the cord from getting tangled or wrapped around the headband. The Headset cord should be clear of the headband accessory and torsion band. DRAFT Wear Glasses? Pull the magnetic frame away from the Headset and replace it with the Prescription Insert. Order yours at Rochester Optical’s FrameofChoice.com. A correctly seated Prescription Insert. DRAFT Turn On Your Magic Leap Press the button on the front of the Compute Pack and wait until the lights are fully illuminated. The five lights towards the top of the Compute Pack will be illuminated when fully powered. DRAFT Identifying Buttons and Controls Review the corresponding illustrations to become familiar with the buttons and controls of your new Magic Leap 2. Identify the buttons and controls on the Magic Leap 2 Controller and Compute Pack pictured. DRAFT Set Up Your Device Your device needs to be set up before you can use it. 1. Your Controller should be connected to your device from the factory. If it isn’t already connected, pair your Controller to the Compute Pack using the USB-C to USB-C cable. You can then follow the prompts in your device. 2. Connect to WiFi using the Settings app. a. Click on Network and internet. b. Click on Wi-Fi. c. Scroll through the list of WiFi using the touchpad and choose your preferred network. d. For secure networks, a virtual keyboard will popup: Enter your password using the Controller. e. Click “connect” on the WiFi screen. Connect to WiFi through the Home > Setting > Network & internet menu, pictured here. DRAFT Charge, Clean, and Store Safely Charge For the best experience, make sure the device is fully charged every time you use it. Clean Make sure the device is turned off while cleaning. Remove the Forehead Pad, Nose Pad, and Lens Insert. Use a damp, but not wet, isopropyl alcohol wipe or sterile, lint-free cloth to gently clean the Headset, Compute Pack, and Controller. Use a damp, sterile, lint-free cloth to rinse and a dry one to finish. Store Safely store the device in the Carry Case or box provided. Always keep it out of direct sunlight to avoid damage. For the full safety instructions, see the Safety Guide. DRAFT Keep up to date We may update this guide from time to time. For the latest version, please visit magicleap.com/start Copyright © 2018 - 2022 Magic Leap, Inc.

Magicf"r}K Magic Leap 75OO West Sunrise Boulevard Plantation, FL 33313 USA Jonathan Reeves J reeves@ magiclea p.com May 09,2022 Re: FCC Agent Authorization UL LLC To whom it may concern: 47173 Benicia Street Fremont, CA 94538, USA l, the undersigned, hereby authorize UL Verification Services lnc. to act on our behalf in all manners relating to application for authorization of the following equipment: 2AM5N-ML2Ml 2AM5N-ML2M2 This includes signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services lnc. on our behalf shall have the same effect as acts of our own. l, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of i9BB, 21 U.S.C.853(a). ln authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) fulfill the requirements for the scope of certification requested, including implementing any appropriate changes requested by UL Verification Services Telecommunications Certification Body (TCB) and / or the FCC; c) supply any and all information needed for the evaluation of the products for which certifi cation is sought; o) make claims regarding certification only in respect of the scope for which certification has been granted; C) not use our product certification in such a manner as to bring the TCB or FCC into disrepute and to not make any statement regarding product certification which the TCB or FCC may consider misleading or unauthorized; e) discontinue use of all advertising matter that contains any reference thereto and complies with any and all actions required by the FCC upon suspension or cancellation of certification; l) use certification only to indicate that products are certified in conformity with specified standards; Magicr.riK Magic Leap 7500 West Sunrise Boulevard Plantation, FL 33313 USA Jonathan Reeves [email protected] g) endeavor to ensure that no certificate or report or any part thereof is used in a misleading manner, and any copies of the grants/certificates shall be reproduced in their entirety; h) comply with the requirements of the TCB and FCC, including the use of marks and label information prescribed for the scope of certification, when making reference to product certification in communication media such as documents, brochure or advertisements; i) comply with the requirements for certification, supply any information needed for evaluation of products to be certified and, where appiicable. make provision for the participation of observers; i) ensure that products marketed under the scope of the requested certification continue to comply with the certification requirements; k) provide a sample of a production unit for testing within 30 days of the request should this product be selected as part of either the TCB's or the FCC's market surveillance requirements; i) keep a record of all complaints relating to product's compliance with requirements of relevant standard; make records available to UL or FCC when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; m) inform the TCB immediately of any changes that may affect its ability to comply with the certifi cation requirements. This authorization is valid until further written notice from the applicant. Jonathan Reeves Sr. Director, Regu latory/Compliance/euality Systems. Sincerely Yours,

Magicr.rD'K Magic Leap 75OO West Sunrise Boulevard Plantation, FL 33313 USA Jonathan Reeves J [email protected] May 25,2022 Attn: FCC Office of Engineering and Technology / UL Verifi cation Services TCB Re: Request for Confidentiality FCC lD: 2AM5N-ML2M2 To Whom lt May Concern. Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission's rules (47 CFR SS 0.452 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. . Schematic Diagram . Block Diagram . Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. ln addition to above mentioned documents, pursuant to Public Notice DA O4-17O5 of the Commission's policy, in order to comply with the marketing regulations in 47 CFR S2.BO3 and the importation rules in 47 CFR S2.12O4, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 18O days after the grant date: . lnternal Photos . Test Setup Photos . User Manuals (Safety Guide and Quick Start Guide) It is our understanding that all measurement test reports, FCC lD label format and correspondent during certification review process cannot be granted as confidential Magicr.ri'K Magic Leap 75OO West Sunrise Boulevard Plantation, FL 33313 usA Jonathan Reeves [email protected] documents and those information equipment authorization is issued. Best Regards -2,,*>* Jonathan Reeves Sr. Director, Regulatory/Compliance/euality Systems. will be available for public review once the grant of .'-) --_ /'\

FCC ID: 2AM5N-ML2M2 IC: 23045-ML2M2 Page of 3 1 Magic Leap 2 - Controller External Photos Figure 1: Controller top view Figure 2: Controller bottom view FCC ID: 2AM5N-ML2M2 IC: 23045-ML2M2 Page of 3 2 Figure 3: Controller Side(right) view Figure 3: Controller Side(left) view FCC ID: 2AM5N-ML2M2 IC: 23045-ML2M2 Page of 3 3 Figure 5: Controller Side(top) view Figure 6: Charger Figure 4: Controller Side(bottom) view

FCC ID: 2AM5N-ML2M2 IC: 23045- ML2M2 Page 1 of 1 Magic Leap 2 - Controller Label Drawings Model: M2003000 M2004000 M2005000 M2103000 M2104000 M2105000

FCC ID: 2AM5N-ML2M 2 IC: 23045-ML2M 2 Page 1 of 5 Magic Leap 2 - Controller Internal Photos Figure 1: Controller – first layer below the top cover FCC ID: 2AM5N-ML2M 2 IC: 23045-ML2M 2 Page 2 of 5 Figure 2: Controller – first layer below the top cover FCC ID: 2AM5N-ML2M 2 IC: 23045-ML2M 2 Page 3 of 5 Figure 3: Controller – top PCB view, with and without shield FCC ID: 2AM5N-ML2M 2 IC: 23045-ML2M 2 Page 4 of 5 Figure 4: Controller – second layer before the battery compartment FCC ID: 2AM5N-ML2M 2 IC: 23045-ML2M 2 Page 5 of 5 Figure 5: Controller – Bottom PCB view, with and without shield

Copyright  2022 UL LLC UL LLC authorizes the above-named company to reproduce this Report provided it is reproduced in its entirety. Report Number: 14116837-E2V2FCCIC- Report Issue Date: Revision Date: 2022-05-20 2022-06-07 Model Number: M2004000 FCC ID: 2AM5N-ML2M2 IC ID: 23045-ML2M2 Electromagnetic Compatibility Test Report For Magic Leap Inc 7500 West Sunrise Blvd Plantation, FL 33322 USA REPORT NO: 14116837-E2V2FCCIC-Report DATE: 2022-05-20 REV: 2022-06-07 MODEL: M2004000 Page 2 of 24 Test Report Details Tests Performed By: UL LLC 12 LABORATORY DR. RESEARCH TRIANGLE PARK, NC 27709, U.S.A. Tests Performed For: Magic Leap Inc 7500 West Sunrise Blvd Plantation, FL 33322 USA Issue Date: Revision Date: 2022-05-20 2022-06-07 Model Number Tested: M2004000 Sample Serial Number: G65344G0000E G65344G0000R Applicable Standards: FCC 47 CFR PART 15 SUBPART B:2022 ICES-003 ISSUE 7:2020-10 ICES-Gen Issue 1:2021-02 Date Test Item Received: 2021-08-24 Testing Start Date: 2021-08-25 Date Testing Complete: 2021-10-26 Overall Results: Compliant UL LLC tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. All samples tested were in good operating condition throughout the entire test program. Measurement Uncertainties are published for informational purposes only and were not taken into account unless noted otherwise. This document may not be altered or revised in any way unless done so by UL LLC and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL LLC will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of the U.S. government. REPORT NO: 14116837-E2V2FCCIC-Report DATE: 2022-05-20 REV: 2022-06-07 MODEL: M2004000 Page 3 of 24 Report Directory 1.0 TEST METHODOLOGY .....................................................................................................................................5 1.1 Deviations from standard test methods .........................................................................................................5 1.2 Device Modifications Necessary for Compliance ...........................................................................................5 1.3 TEST RESULTS SUMMARY .........................................................................................................................6 2.0 DECISION RULES AND MEASUREMENT UNCERTAINTY .............................................................................7 2.1 Metrological Traceability ................................................................................................................................7 2.2 Decision Rules ...............................................................................................................................................7 2.3 Measurement Uncertainty ..............................................................................................................................7 2.4 Sample Calculation ........................................................................................................................................7 3.0 GENERAL - Product Description ........................................................................................................................8 3.1 Equipment Description ...................................................................................................................................8 3.2 Device Configuration During Test ..................................................................................................................8 3.2.1 Equipment Used During Test: ....................................................................................................................8 3.2.2 Input/Output Ports: .....................................................................................................................................8 3.2.3 EUT Highest Frequencies: .........................................................................................................................8 3.2.4 Power Interface: .........................................................................................................................................9 3.3 Block Diagram: ............................................................................................................................................ 10 3.4 EUT Configurations ..................................................................................................................................... 11 3.5 EUT Operation Modes ................................................................................................................................ 11 3.6 Rationale for EUT Configurations and Modes of Operation ....................................................................... 11 4.0 APPLICABLE EMISSIONS LIMITS AND TEST RESULTS ............................................................................ 12 4.1 Test Conditions and Results - MAINS TERMINAL - CONDUCTED EMISSIONS ...................................... 12 Test Conditions and Results - RADIATED EMISSIONS .......................................................................................... 16 Appendix A ...................................................................................................................................................................…

Text truncated - open the document above for the full version.

Copyright  2022 UL LLC UL LLC authorizes the above-named company to reproduce this Report provided it is reproduced in its entirety. Report Number: 14116837-E2V2FCCIC- Photos Issue Date: Revision Date: 2022-05-20 2022-06-07 Model Number: M2004000 FCC ID: 2AM5N-ML2M2 IC ID: 23045-ML2M2 PHOTO EXHIBIT For Magic Leap Inc 7500 West Sunrise Blvd Plantation, FL 33322 USA REPORT NO: 14116837-E2V2FCCIC-Photos DATE: 2022-05-20 REV: 2022-06-07 MODEL: M2004000 Page 2 of 8 Test Report Details Tests Performed By: UL LLC 12 LABORATORY DR. RESEARCH TRIANGLE PARK, NC 27709, U.S.A. Tests Performed For: Magic Leap Inc 7500 West Sunrise Blvd Plantation, FL 33322 USA Issue Date: Revision Date: 2022-05-20 2022-06-07 Model Number Tested: M2004000 Sample Serial Number: G65344G0000E G65344G0000R Applicable Standards: FCC 47 CFR PART 15 SUBPART B:2022 ICES-003 ISSUE 7:2020-10 ICES-Gen Issue 1:2021-02 Date Test Item Received: 2021-08-24 Testing Start Date: 2021-08-25 Date Testing Complete: 2021-10-26 REPORT NO: 14116837-E2V2FCCIC-Photos DATE: 2022-05-20 REV: 2022-06-07 MODEL: M2004000 Page 3 of 8 Report Directory 1.0 Setup Photos ......................................................................................................................................................5 REPORT NO: 14116837-E2V2FCCIC-Photos DATE: 2022-05-20 REV: 2022-06-07 MODEL: M2004000 Page 4 of 8 Report Revision History Revision Date Revision Version Description Revised By Revision Reviewed By 2022-05-20 V1 Initial Issue 2022-06-07 V2 Update model number from wildcard M2004XXX to singular model number M2004000. Sarah Thomson Michael Ferrer REPORT NO: 14116837-E2V2FCCIC-Photos DATE: 2022-05-20 REV: 2022-06-07 MODEL: M2004000 Page 5 of 8 1.0 Setup Photos Photo of test setup for Mains Conducted Emissions (Controller) REPORT NO: 14116837-E2V2FCCIC-Photos DATE: 2022-05-20 REV: 2022-06-07 MODEL: M2004000 Page 6 of 8 Photo of test setup for Radiated Emissions: 30-1000 MHz (FCC/ICES), Controller, Charging Mode, Front Photo of test setup for Radiated Emissions: 30-1000 MHz(FCC/ICES), Controller, Charging Mode, Rear REPORT NO: 14116837-E2V2FCCIC-Photos DATE: 2022-05-20 REV: 2022-06-07 MODEL: M2004000 Page 7 of 8 Photo of test setup for Radiated Emissions: 1 GHz - 13 GHz, Controller, Charging Mode Front Photo of test setup for Radiated Emissions: 1 GHz - 13 GHz, Controller, Charging Mode, Rear REPORT NO: 14116837-E2V2FCCIC-Photos DATE: 2022-05-20 REV: 2022-06-07 MODEL: M2004000 Page 8 of 8 END OF PHOTOS EXHIBIT