2AM6U-N700POS Terminal

For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal and that positions the handset a minimum of 5 mm from the body. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

QA-FR-170-B Fujian Newland Payment Technology Co.,Ltd. ADD: No. B602, Building #1, Haixia Jingmao Plaza,Fuzhou Bonded Area 350015, Fuzhou,Fujian, China TEL: +86-0591-83979587 FAX: +86-0591-83977666 Email: [email protected] FCC Authorization Date: 2021-12-21 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Fujian Newland Payment Technology Co.,Ltd., Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Yonghong Zhuang Title:Certification manager

QA-FR-171-A Fujian Newland Payment Technology Co.,Ltd. ADD: No. B602, Building #1, Haixia Jingmao Plaza,Fuzhou Bonded Area 350015, Fuzhou,Fujian, China TEL: +86-0591-83979587 FAX: +86-0591-83977666 Email: [email protected] FCC Confidential Authorization Date: 2021-12-21 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AM6U-N700 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Fujian Newland Payment Technology Co.,Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  Software Security Description  Parts List/Tune up procedure(for licensed devices) The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Yonghong Zhuang Title:Certification manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS WIFI/BLE Antenna 2G/3G/4G Antenna GPS Antenna NFC Antenna

SAR TEST REPORT Applicant: Fujian Newland Payment Technology Co.,Ltd. Address: No. B602, Building #1, Haixia Jingmao Plaza, Fuzhou Bonded Area 350015,Fuzhou, Fujian, China FCC ID: 2AM6U-N700 Product Name: POS Terminal Model Number: N700 Standard(s): 47 CFR Part 2(2.1093) The above equipment has been tested and found compliance with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR21110087-20A Date Of Issue: 2021-12-26 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR21110087-20A Page 2 of 88 SAR TEST RESULTS SUMMARY Operation Frequency Bands Highest Reported 1g SAR (W/kg) Limits (W/kg) Body-Supported (Gap 5mm) Handheld (Gap 0mm) Hotspot (Gap 10mm) GSM 850 0.54 // 1.6 PCS 1900 0.55 // WCDMA Band 2 0.75 // WCDMA Band 4 0.56 // WCDMA Band 5 0.61 // LTE Band 4 0.51 // LTE Band 7 1.10 // LTE Band 12 0.07 // LTE Band 13 1.12 // LTE Band 25&2 0.62 // LTE Band 26&5 0.66 // WLAN 2.4G 0.02 // WLAN 5.2G 0.13 // WLAN 5.3G 0.11 // WLAN 5.6G 1.03 // WLAN 5.8G 0.58 // Maximum Simultaneous Transmission SAR Items Body-SupportedHandheldHotspotLimits Sum SAR(W/kg) 1.55 / / 1.6 SPLSR N/A N/A N/A 0.04 EUT Received Date:2021/11/18 Test Date: 2021/12/21 ~ 2021/12/23 Test Result:Pass Note: The test data of 5G Wi-Fi please refer to report: CR21110087-20B, which issued by Shenzhen Accurate Technology Co., Ltd. on 2021-12-18. China Certification ICT Co., Ltd (Dongguan) Report No.: CR21110087-20A Page 3 of 88 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR21110087-20A Page 4 of 88 CONTENTS SAR TEST RESULTS SUMMARY .............................................................................................. 2 TEST FACILITY .......................................................................................................................................... 3 DECLARATIONS .......................................................................................................................................... 3 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2.2 Test Specification, Methods and Procedures ................................................................................................. 7 1.2.3 SAR Limts ..................................................................................................................................................... 8 3. SAR MEASUREMENT SYSTEM ............................................................................................ 9 Recommended Tissue Dielectric Parameters for Head liquid ............................................................................... 15 EQUIPMENT LIST AND CALIBRATION .............................................................................. 16 EQUIPMENTS LIST & CALIBRATION INFORMATION ............................................................................. 16 SAR MEASUREMENT SYSTEM VERIFICATION ............................................................... 17 LIQUID VERIFICATION ............................................................................................................................ 17 SYSTEM ACCURACY VERIFICATION ....................................................................................................... 20 SAR SYSTEM VALIDATION DATA .................................................................................................. 21 EUT TEST STRATEGY AND METHODOLOGY .................................................................. 26 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR ............................................... 26 CHEEK/TOUCH POSITION ....................................................................................................................... 27 EAR/TILT POSITION ................................................................................................................................ 27 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS ...................................................... 28 TEST DISTANCE FOR SAR EVALUATION ................................................................................................ 29 SAR EVALUATION PROCEDURE ............................................................................................................. 30 CONDUCTED OUTPUT POWER MEASURE…

Text truncated - open the document above for the full version.

APPENDIX C PROBE CALIBRATION CERTIFICATES DIPOLE CALIBRATION CERTIFICATES

Report No.: CR21110087-20A Page 1 of 74 Test Plot 1#:GSM 850_ Mid_Body Back DUT: POS Termina; Type: N700; Serial: CR21110087-SA-S1 Communication System: Generic GPRS-4 slots; Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium parameters used: f = 836.6 MHz; σ = 0.933 S/m; ε r = 41.522; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN7522; ConvF(9.93, 9.93, 9.93) @ 836.6 MHz; Calibrated: 2021/4/19 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1354; Calibrated: 2021/9/1 • Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (71x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.476 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.97 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.621 W/kg SAR(1 g) = 0.337 W/kg; SAR(10 g) = 0.192 W/kg Maximum value of SAR (measured) = 0.472 W/kg 0 dB = 0.316 W/kg = -5.00 dBW/kg Report No.: CR21110087-20A Page 2 of 74 Test Plot 2#: GSM 850_Mid_Body Left DUT: POS Termina; Type: N700; Serial: CR21110087-SA-S1 Communication System: Generic GPRS-4 slots; Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium parameters used: f = 836.6 MHz; σ = 0.933 S/m; ε r = 41.522; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN7522; ConvF(9.93, 9.93, 9.93) @ 836.6 MHz; Calibrated: 2021/4/19 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1354; Calibrated: 2021/9/1 • Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (51x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.670 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.28 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 1.11 W/kg SAR(1 g) = 0.467 W/kg; SAR(10 g) = 0.215 W/kg Maximum value of SAR (measured) = 0.852 W/kg 0 dB = 0.852 W/kg = -0.70 dBW/kg Report No.: CR21110087-20A Page 3 of 74 Test Plot 3#:GSM 850_Mid_Body Right DUT: POS Termina; Type: N700; Serial: CR21110087-SA-S1 Communication System: Generic GPRS-4 slots; Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium parameters used: f = 836.6 MHz; σ = 0.933 S/m; ε r = 41.522; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN7522; ConvF(9.93, 9.93, 9.93) @ 836.6 MHz; Calibrated: 2021/4/19 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1354; Calibrated: 2021/9/1 • Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (51x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.225 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.88 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 0.260 W/kg SAR(1 g) = 0.173 W/kg; SAR(10 g) = 0.120 W/kg Maximum value of SAR (measured) = 0.228 W/kg 0 dB = 0.228 W/kg = -6.42 dBW/kg Report No.: CR21110087-20A Page 4 of 74 Test Plot 4#: GSM 850_Mid_Body Top DUT: POS Termina; Type: N700; Serial: CR21110087-SA-S1 Communication System: Generic GPRS-4 slots; Frequency: 836.6 MHz;Duty Cycle: 1:2 Medium parameters used: f = 836.6 MHz; σ = 0.933 S/m; ε r = 41.522; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN7522; ConvF(9.93, 9.93, 9.93) @ 836.6 MHz; Calibrated: 2021/4/19 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1354; Calibrated: 2021/9/1 • Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (51x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.575 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 14.62 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 0.822 W/kg SAR(1 g) = 0.334 W/kg; SAR(10 g) = 0.179 W/kg Maximum value of SAR (measured) = 0.559 W/kg 0 dB = 0.559 W/kg = -2.53 dBW/kg Report No.: CR21110087-20A Page 5 of 74 Test Plot 5#: PCS 1900_Mid_Body Back DUT: POS Termina; Type: N700; Serial: CR21110087-SA-S1 Communication System: Generic GPRS-4 slots; Frequency: 1880 MHz;Duty Cycle: 1:2 Medium parameters used: f = 1880 MHz; σ = 1.415 S/m; ε r = 40.023; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN7522; ConvF(7.94, 7.94, 7.94) @ 1880 MHz; Calibrated: 2021/4/19 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1354; Calibrated: 2021/9/1 • Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (81x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.685 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.217 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 0.777 W/kg SAR(1 g) = 0.396 W/kg; SAR(10 g) = 0.207 W/kg Maximum value of SAR (measured) = 0.593 W/kg 0 dB = 0.593 W/kg = -2.27 dBW/kg Report No.: CR21110087-20A Page 6 of 74 Test Plot 6#: PCS 1900_Mid_Body Left DUT: POS Termina; Type: N700; Serial: CR21110087-SA-S1 Communication System: Generic GPRS-4 slots; Frequency: 1880 MHz;Duty Cycle: 1:2 Medium parameters used: f = 1880 MHz; σ = 1.415 S/m; ε r = 40.023; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN7522; ConvF(7.94, 7.94, 7.94) @ 1880 MHz; Calibrated: 2021/4/19 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1354; Calibrated: 2021/9/1 • Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan…

Text truncated - open the document above for the full version.

Report No.: CR21110087-20A Page 1 of 4 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Phantom: Twin SAM; Type: Twin SAM V5.0; Serial: TP:1412 Report No.: CR21110087-20A Page 2 of 4 Body Back Setup Photo (5mm) Body Left Setup Photo (5mm) 5 mm 5mm Report No.: CR21110087-20A Page 3 of 4 Body Right Setup Photo (5mm) Body Top Setup Photo (5mm) 5 mm 5mm Report No.: CR21110087-20A Page 4 of 4 Body Bottom Setup Photo (5mm) 5mm

★Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “ ”. Shenzhen Accurate Technology Co., Ltd. is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. 1/F., Building A, Changyuan New Material Port, Science & Industry Park, Nanshan District, Shenzhen, Guangdong, P.R. China Tel: +86 755-26503290 Fax: +86 755-26503396 Web: www.atc-lab.com Version 801: 2021-11-09 Page 1 of 70 FCC SAR 4G TEST REPORT Applicant Name : Fujian Newland Payment Technology Co.,Ltd. Address : No. B602, Building #1, Haixia Jingmao Plaza, Fuzhou Bonded Area 350015,Fuzhou, Fujian, China Report Number : CR21110087-20B FCC ID: 2AM6U-N700 Test Standard (s) FCC Part 2.1093 Sample Description Product Type: POS Terminal Model No.: N700 Date Received: 2021/11/10 Date of Test: 2021/11/23 Report Date: 2021/12/20 Test Result: Pass* * In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: Lance Li Candy Li EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: CR21110087-20B Version 801: 2021-11-09 Page 2 of 70 FCC SAR 4G Attestation of Test Results EUT Information EUT Description POS Terminal Tested Model N700 FCC ID 2AM6U-N700 Serial Number CR21110087-SA-S2 MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) 5.2G Wi-Fi 1g Body SAR 0.13 1. 6 5.3G Wi-Fi 1g Body SAR 0.11 5.6G Wi-Fi 1g Body SAR 1.03 5.8G Wi-Fi 1g Body SAR 0.58 Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices RF Exposure Procedures: TCB Workshop April 2019 IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-1:2016 Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 248227 D01 802 11 Wi-Fi SAR v02r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Note: The test data of 2G/3G/4G, 2.4G Wi-Fi, bluetooth and simultaneous transmission considerations please refer to report: CR21110087-20A, which issued by China Certification ICT Co., Ltd (Dongguan) on 2021-12-26. Shenzhen Accurate Technology Co., Ltd. Report No.: CR21110087-20B Version 801: 2021-11-09 Page 3 of 70 FCC SAR 4G TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 EUT DESCRIPTION ................................................................................................................................................... 5 TECHNICAL SPECIFICATION ............................................................................................................................................. 5 REFERENCE, STANDARDS, AND GUIDELINES ................................................................................................. 6 SAR LIMITS ..................................................................................................................................................................... 7 FACILITIES ................................................................................................................................................................. 8 DESCRIPTION OF TEST SYSTEM .......................................................................................................................... 9 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 14 EQUIPMENTS LIST & CALIBRATION INFORMATION ........................................................................................................ 14 SAR MEASUREMENT SYSTEM VERIFICATION ............................................................................................. 15 LIQUID VERIFICATION ................................................................................................................................................... 15 SYSTEM ACCURACY VERIFICATION ............................................................................................................................... 16 SAR SYSTEM VALIDATION DATA ......................................................................................................................... 17 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 21 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR ........................................................................... 21 CHEEK/TOUCH POSITION ..........................................................…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: Fujian Newland Payment Technology Co.,Ltd. Address: No. B602, Building #1, Haixia Jingmao Plaza, Fuzhou Bonded Area 350015,Fuzhou, Fujian, China FCC ID: 2AM6U-N700 Product Name: POS Terminal Standard(s): 47 CFR Part 15, Subpart E(15.407) ANSI C63.10-2013 KDB 789033 D02 General U-NII Test Procedures New Rules v02r01 The above equipment has been tested and found compliance with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR21110087-00A Date Of Issue: 2021-12-22 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR21110087-00A Page 2 of 88 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR21110087-00A Page 3 of 88 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 1. GENERAL INFORMATION .................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 5 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 8 1.3 MEASUREMENT UNCERTAINTY ........................................................................................................ 10 2. SUMMARY OF TEST RESULTS .......................................................................................... 11 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 12 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 12 3.1.1 Applicable Standard ..................................................................................................................................... 12 3.1.2 EUT Setup.................................................................................................................................................... 13 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 13 3.1.4 Test Procedure ............................................................................................................................................. 14 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 14 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 15 3.2.1 Applicable Standard ..................................................................................................................................... 15 3.2.2 EUT Setup.................................................................................................................................................... 16 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 17 3.2.4 Test Procedure ............................................................................................................................................. 17 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 18 3.3 EMISSION BANDWIDTH: .................................................................................................................... 19 3.3.1 Applicable Standard ..................................................................................................................................... 19 3.3.2 EUT Setup................................................................…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: Fujian Newland Payment Technology Co.,Ltd. Address: No. B602, Building #1, Haixia Jingmao Plaza, Fuzhou Bonded Area 350015,Fuzhou, Fujian, China FCC ID: 2AM6U-N700 Product Name: POS Terminal Model Number: N700 Standard(s): 47 CFR Part 15, Subpart E(15.407) RSS-247 Issue 2, February 2017 FCC KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02 The above equipment has been tested and found compliance with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR21110087-00F Date Of Issue: 2021-12-29 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR21110087-00F Page 2 of 17 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR21110087-00F Page 3 of 17 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 1. GENERAL INFORMA…

Text truncated - open the document above for the full version.