2AME8MT-15Mate Pro

Rev 1/26/2023 (olibra llc) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10‐29‐2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AME8MT‐15 [olibra llc] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [olibra llc] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti‐virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti‐virus software pursuant to DA‐24‐886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end‐user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) zohar shinar Rev 1/26/2023 (olibra llc) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10‐29‐2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AME8MT‐15 [olibra llc] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) zohar shinar

Rev 1/26/2023 (olibra llc) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 10‐29‐2025 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: [2AME8MT‐15] Applicant FRN: [0026594077] [olibra llc] (“the applicant”) certifies that, as of the date of the filing of the application, [olibra llc] is our designated U.S. agent for service of process for the above referenced FCC ID. [olibra llc] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission‐related proceeding involving the equipment. [olibra llc] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: FRN: 0026594077 Name: olibra llc Address: 45 legion dr 07626 CRESSKILL New Jersey United States 07626 Contact Person: zohar shinar Tel.: 917 5191308 Email: [email protected] Sincerely, [olibra llc] [olibra llc] [zohar shinar] [zohar shinar] [Insert Applicant signature] [U.S. Agent signature]

(olibra llc) Declaration of Authorization We Name: olibra llc Address: 45 legion dr 07626 City: CRESSKILL State: New Jersey Country: United States Zip Code: 07626 Declare that: Name Representative of agent: Ms. Rose Liu (1) Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country China is authorized to apply for Certification of the following product(s): Product description: Mate Pro Type designation: MT-1500 Brand: Bond FCC ID: 2AME8MT-15 Validity/ expiry date: 2026-10-28 on our behalf. Date: 2025-10-29 City: CRESSKILL Name: zohar shinar Function: ceo Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

olibra llc Date: 2025-10-29 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AME8MT-15 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ----- zohar shinar --------- Grantee Contact’s Signature olibra llc

Project No.: 2508C306 Page 1 of 17 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2508C306 Page 2 of 17 Project No.: 2508C306 Page 3 of 17 Project No.: 2508C306 Page 4 of 17 Project No.: 2508C306 Page 5 of 17 Project No.: 2508C306 Page 6 of 17 Project No.: 2508C306 Page 7 of 17 Project No.: 2508C306 Page 8 of 17 Project No.: 2508C306 Page 9 of 17

Other details: Colors: Elements in red need to be generated. Peelable back label - on back cover (Mate - Silver/Black) File Name: Scale: 1:1 1/1 File version: Description: Page: 4 115 -10 5 4 0 Information must be generated in with Font Red Hat Text 5 pt and use color C0 M0 Y0 K70 26mm 52mm R: 3mm C0 M0 Y0 K70 Information must be generated in with Font Red Hat Text 5 pt and use color C0 M0 Y0 K70 QR Code URL: https://bndh.io/SMBXX10056?pin=1234 BondID/Serial PIN Other details: Colors: Elements in red need to be generated. Peelable back label - on back cover (Mate Charcoal/Black) File Name: Scale: 1:1 1/1 File version: Description: Page: 2 115 -10 5 4 3 Information must be generated in with Font Red Hat Text 5 pt and use color C0 M0 Y0 K70 26mm 52mm R: 3mm QR Code URL: https://bndh.io/SMBXX10056?pin=1234 C0 M0 Y0 K70 Information must be generated in with Font Red Hat Text 5 pt and use color C0 M0 Y0 K70 BondID/Serial PIN

Project No.: 2508C306 Page 10 of 17 BT LE Antenna Sub-1G Antenna Project No.: 2508C306 Page 11 of 17 Project No.: 2508C306 Page 12 of 17 Project No.: 2508C306 Page 13 of 17 Project No.: 2508C306 Page 14 of 17 Project No.: 2508C306 Page 15 of 17 Project No.: 2508C306 Page 16 of 17 Project No.: 2508C306 Page 17 of 17

Report No.: BTL-FCCP-3-2508C306 Report Version: R01 Page 1 of 4 FCC RF EXPOSURE REPORT FCC ID: 2AME8MT-15 Project No. : 2508C306 Equipment : Mate Pro Brand Name : Bond Test Model : MT-1500 Model Name : MT-1500 Hardware Version : V1 Software Version : v4.23.13.1 Applicant : olibra llc Address : 45 legion dr CRESSKILL, NJ 07626 Manufacturer : olibra llc Address : 45 legion dr CRESSKILL, NJ 07626 Factory : Chengdu Lelian Zhichuang Technology Co., Ltd. Address : No. 1, 2nd Floor, Building 2, 15 Gaopeng Avenue, High-tech Zone, Chengdu, Sichuan Province Date of Receipt : Aug. 08, 2025 Date of Test : Aug. 12, 2025 ~ Sep. 29, 2025 Issued Date : Nov. 13, 2025 Test Sample : Engineering Sample No.: DG920250808160, DG920250808159 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & KDB447498 D01 T he above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Antony Liang Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-3-2508C306 Report Version: R01 Page 2 of 4 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-3-2508C306 R00 Original Report. Nov. 06, 2025 Invalid BTL-FCCP-3-2508C306 R01 This report updated the information of antenna in page 4. It is a revision of the report BTL-FCCP-3-2508C306 R00. This is a newly released report, replacing the BTL-FCCP-3-2508C306 R00 report. Nov. 13, 2025 Valid Report No.: BTL-FCCP-3-2508C306 Report Version: R01 Page 3 of 4 1. GENERAL CONCULUSION According to FCC KDB447498 D01, Appendix A, SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison Appendix A - SAR Test Exclusion Thresholds for 100 MHz - 6 GHz and < 50 mm MHz 5 10 15 20 25 30 35 40 45 50 mm 150 39 77 116 155 194 232 271 310 349 387 SAR Test Exclusion Thresholds (mW) 300 27 55 82 110 137 164 192 219 246 274 450 22 45 67 89 112 134 157 179 201 224 835 16 33 49 66 82 98 115 131 148 164 900 16 32 47 63 79 95 111 126 142 158 1500 12 24 37 49 61 73 86 98 110 122 1900 11 22 33 44 54 65 76 87 98 109 2450 10 19 29 38 48 57 67 77 86 96 3600 8 16 24 32 40 47 55 63 71 79 5200 7 13 20 26 33 39 46 53 59 66 5400 6 13 19 26 32 39 45 52 58 65 5800 6 12 19 25 31 37 44 50 56 62 Report No.: BTL-FCCP-3-2508C306 Report Version: R01 Page 4 of 4 2. TABLE FOR FILED ANTENNA F or Sub-1G: Ant. Manufacturer P/N Antenna Type Connector Gain (dBi) 1 Shenzhen Anwei Wireless Techonlogy Co. Ltd AW006-Bond-021-A0 FPC N/A -2.14 For BT LE: Ant. Manufacturer P/N Antenna Type Connector Gain (dBi) 1 Shenzhen Anwei Wireless Techonlogy Co. Ltd AW006-Bond-022-A0 PIFA N/A 2.25 3. TEST RESULTS Frequency (MHz) Max. EIRP (dBm) Max. EIRP (mW) Result Limit 431 2.58 1.811 0.561 3.0 2480 4.74 2.979 0.923 3.0 N ote: (1)EIRP=Field Strength+20log(d)-104.8, where d is the measurement distance(m). (2)No SAR evaluation required since transmitter power is below FCC threshold. End of Test Report

Report No.: BTL-FCCP-1-2508C306 Report Version: R01 Page 1 of 57 FCC Radio Test Report FCC ID: 2AME8MT-15 This report concerns: Original Grant Project No. : 2508C306 Equipment : Mate Pro Brand Name : Bond Model Name : MT-1500 Applicant : olibra llc Address : 45 legion dr CRESSKILL, NJ 07626 Manufacturer : olibra llc Address : 45 legion dr CRESSKILL, NJ 07626 Factory : Chengdu Lelian Zhichuang Technology Co., Ltd. Address : No. 1, 2nd Floor, Building 2, 15 Gaopeng Avenue, High-tech Zone, Chengdu, Sichuan Province Date of Receipt : Aug. 08, 2025 Date of Test : Aug. 12, 2025 ~ Oct. 20, 2025 Issued Date : Nov. 13, 2025 Test Sample : Engineering Sample No.: DG920250808159 for radiated emissions below 30MHz, DG920250808160 for others. Standard(s) : FCC CFR Title 47, Part 15, Subpart C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Antony Liang Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-1-2508C306 Report Version: R01 Page 2 of 57 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2508C306 Report Version: R01 Page 3 of 57 Table of Contents Page REVISION HISTORY 5 1 . APPLICABLE STANDARDS 6 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 2.3 TEST ENVIRONMENT CONDITIONS 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 9 3.3 DUTY CYCLE 10 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.5 SUPPORT UNITS 11 3.6 CUSTOMER INFORMATION DESCRIPTION 11 4 . AC POWER LINE CONDUCTED EMISSIONS 12 4.1 LIMIT 12 4.2 TEST PROCEDURE 12 4.3 DEVIATION FROM TEST STANDARD 12 4.4 TEST SETUP 13 4.5 EUT OPERATING CONDITIONS 13 4.6 TEST RESULTS 13 5 . RADIATED EMISSION 14 5.1 LIMIT 14 5.2 TEST PROCEDURE 15 5.3 DEVIATION FROM TEST STANDARD 16 5.4 TEST SETUP 16 5.5 EUT OPERATING CONDITIONS 18 5.6 TEST RESULTS - 9 KHZ TO 30 MHZ 18 5.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 18 5.8 TEST RESULTS - ABOVE 1000 MHZ 18 6 . 20 DB SPECTRUM BANDWIDTH MEASUREMENT 19 6.1 LIMIT 19 6.2 TEST PROCEDURE 19 6.3 DEVIATION FROM STANDARD 19 Report No.: BTL-FCCP-1-2508C306 Report Version: R01 Page 4 of 57 Table of Contents Page 6.4 TEST SETUP 19 6.5 EUT OPERATION CONDITIONS 19 6.6 TEST RESULTS 19 7 . TIMING TESTING 20 7.1 LIMIT 20 7.2 TEST PROCEDURE 20 7.3 DEVIATION FROM STANDARD 20 7.4 TEST SETUP 20 7.5 EUT OPERATION CONDITIONS 20 7.6 TEST RESULTS 20 8 . MEASUREMENT INSTRUMENTS LIST 21 9 . EUT TEST PHOTO 23 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 28 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 29 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 34 APPENDIX D - RADIATED EMISSION- ABOVE 1000 MHZ 47 APPENDIX E - 20 DB SPECTRUM BANDWIDTH 54 APPENDIX F - TIMING TESTING 56 Report No.: BTL-FCCP-1-2508C306 Report Version: R01 Page 5 of 57 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-1-2508C306 R00 Original Report. Nov. 06, 2025 Invalid BTL-FCCP-1-2508C306 R01 This report updated the information of antenna in section 3.1 note 3. It is a revision of the report BTL-FCCP-1-2508C306 R00. This is a newly released report, replacing the BTL-FCCP-1-2508C306 R00 report. Nov. 13, 2025 Valid Report No.: BTL-FCCP-1-2508C306 Report Version: R01 Page 6 of 57 1. APPLICABLE STANDARDS According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standard: ANSI C63.10-2020 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC CFR Title 47, Part 15, Subpart C Standard(s) Section Test Item Test Result Judgment Remark 15.207 AC Power Line Conducted Emissions APPENDIX A N/A ------ 15.205 15.209 15.231(b) Radiated Emission APPENDIX B APPENDIX C APPENDIX D PASS ------ 15.231(c) 20 dB Spectrum Bandwidth APPENDIX E PASS ------ 15.231(a) Timing Testing APPENDIX F PASS ------ 15.203 Antenna Requirement ------ PAS…

Text truncated - open the document above for the full version.

One-stop communication RF antenna solution service provider ᅮ 1 亥 Shenzhen Anwei Wireless Techonlogy Co. Ltd APPROVAL SHEET Customer AIKS Technology Specs Bond-matrix-2.0 Part Number $:%RQG$ $:%RQG$ Frequency Band 433 Antenna 2.4G WIFI/BT Antenna Color black Edition REV:A0 Salesperson zhulixin Design Huanghe Structure QIN YUN LIN Confirm Date 2025/11/12 Signing Date Customer confirmation: Join hands to create the future One-stop communication RF antenna solution service provider ᅮ 2 亥 CONTENTS аǃProduct specifications ··································································································· 3 ҼǃElectrical performance ·································································································· 3 1. Specifications and standards ······················································································ 3 2. Antenna matching circuit ··························································································· 3 йǃParameter testing ·········································································································· 4 1. Test setup ·················································································································· 4 2. Test results ················································································································· 4 ഋǃActive test setup ············································································································ 4 1. The test site ··············································································································· 4 2. Test results ··········································································································· 5--9 3. Antenna assembly method ························································································ 10 ӄǃRecommendations and conclusions ·············································································· 11 ǃޝStructural drawings ··································································································· 11-13 One-stop communication RF antenna solution service provider ᅮ 3 亥 ааǃProduct specifications The report mainly provides the parameter test of Bond-matrix-2. 0 antenna performance. The Bond-matrix-2. 0 antenna is a 433/2. 4G WIFI antenna. (As shown in Figure below) Bond-matrix-2.0 433 antenna Bond-matrix-2.0 2.4G BT/WIFI antenna ҼǃElectrical performance One-stop communication RF antenna solution service provider ᅮ 4 亥 1. Specifications and standards The bond-matrix-2. 0 antenna operates in the frequency band of 2400- 2480 MHZ / 433 MHZ, where resonance occurs in this band.DŽ 2 Antenna matching circuit No changes made Antenna structure: FPC + coaxial cable / Copper-zinc alloy ййǃParameter testing 1. Test setup VSWR The test device is connected in sequence as follows:˖ E5071B Network analyzerė50RKP coaxial Cableė110mm long copper tubeėTest fixture Handling of test fixtures˖ A SMA-J connector is pulled out from the 50-ohm test point of the antenna on the mobile phone PCB with a hard cable, connected to the copper tube with a choke, and then connected to other devices in turn. 2. Test results Everything is normalDŽ One-stop communication RF antenna solution service provider ᅮ 5 亥 ഋഋǃActive test setup The active test device is connected in sequence as follows: Agilent 8960ė50RKP coaxial CableėSatimo SG16 test systemėMobile phone to be tested 1. The test site AW microwave anechoic chamber: The test frequency range is 400MHz-6GHz, the quiet zone is 40cm in diameter, and the reflectivity is less than -90 dB. 2. Test results The maximum radiation power and maximum reception sensitivity reflect the maximum power radiation value and the best reception performance of the antenna in the entire radiation space. TRP and TIS reflect the average radiation power and average reception sensitivity of the antenna, that is, the overall reception performance of the antenna DŽ The following is the result of the Bond-matrix-2. 0 passive test˖ One-stop communication RF antenna solution service provider ᅮ 6 亥 One-stop communication RF antenna solution service provider ᅮ 7 亥 One-stop communication RF antenna solution service provider ᅮ 8 亥 One-stop communication RF antenna solution service provider ᅮ 9 亥 One-stop communication RF antenna solution service provider ᅮ 10 亥 Antenna assembly method˖ Bond-matrix-2.0 433 antenna Bond-matrix-2.0 2.4G BT/WIFI antenna One-stop communication RF antenna solution service provider ᅮ 11 亥 ӄ ӄǃRecommendations and conclusions This report is based on the antenna electrical performance measured by the machine provided by the customer, please review it carefully.DŽ ޝǃStructural drawings As shown in Figure below One-stop communication RF antenna solution service provider ᅮ 12 亥 One-stop communication RF antenna solution service provider ᅮ 13 亥 One-stop communication RF antenna solution service provider ᅮ 14 亥 Join Hands To Create The Future

Report No.: BTL-FCCP-1-2508C306 Report Version: R00 Page 23 of 57 9. EUT TEST PHOTO Radiated Emissions Test Photos 9 kHz to 30 MHz Report No.: BTL-FCCP-1-2508C306 Report Version: R00 Page 24 of 57 Radiated Emissions Test Photos 30 MHz to 1 GHz Report No.: BTL-FCCP-1-2508C306 Report Version: R00 Page 25 of 57 Radiated Emissions Test Photos Above 1 GHz Report No.: BTL-FCCP-1-2508C306 Report Version: R00 Page 26 of 57 Report No.: BTL-FCCP-1-2508C306 Report Version: R00 Page 27 of 57 Conducted Test Photos