2AMG5-STG-7232-KBWireless speaker

User Manual Notice: Please read user manual carefully and keep it for your records. Charging:  Please make sure that the product is fully charged for at least 2 hours before the first use. Charge the product with the provided USB cable which is compatible with any computer or other 5 V DC charger. The charge/Bluetooth indicator will light red while charging and turn off when the battery is fully charged.A full charge takes about some hours.Please charge the battery if the speaker hasn’t been used for a long time (more than one month). Functionality: Power on/off:Firstly long press power button to turn on or off speaker , there will be a prompt tone, the Indicator lights will be always blue after the Bluetooth is connected. Secondly Activate the Bluetooth function of the mobile phone or other device, and set the Phone to search for ‘BT name ’The voice prompt will confirm that pairing was successful. Volume down ：short press button - to decrease the volume. Volume up : short press button + to increase volume. Previous song: long press button - for previous song. Next song: long press button + for next song. - Play/Pause: When playing music, short press the pause button to pause , and press again to continue. - When there’s a call coming , short press the pause button to answer the phone. - When the call ends, short press pause button to hang up the phone. - When there’s a call coming , long press pause button to reject it. -Redial call: Double press the pause button Multiple connectivity Modes Connecting via TF Card : insert a TF card and the speaker will automatically start playing MP3 format music in it. Mode switch :short press power button to change TF mode or BT mode you like Light mode:Double press power button to change the light , there are 4 light mode Automatic shutdown:Automatically shuts down after 10 minutes if Bluetooth is not connected or disconnected. Automatically shuts down after 10 minutes if connected to the phone but not playing music. Connecting Two speakers using (TWS) True Wireless Stereo Feature step1: Ensure Bluetooth function is OFF on your Bluetooth Speaker Step 2 : Turn on two speakers step 3 : Long Press the Pause/Play Button on one of the speakers, both of them will enter Tws pairing status. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Rev 1/26/2023 JLR Gear Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-02-2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AMG5-STG-7232-KB [JLR Gear] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [JLR Gear] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Eric Marshburn Rev 1/26/2023 JLR Gear Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-02-2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AMG5-STG-7232-KB [JLR Gear] ce8rtifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Eric Marshburn

JLR Gear U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: December 2, 2025 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2AMG5-STG-7232-KB JLR Gear (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: JLR Gear FRN: 0026573915 Address: 2434 Research Dr, Livermore, California, United States 94550 Signature: Contact Person: Eric Marshburn Tel: 510-777-9894 Email: [email protected]

Inverted F Antenna Specification Summary ITEMANT SPEC Model Name 2.4G ANT HorizontalVertical 2400MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Center Frequency -1.26-0.76-0.58-5.25-2.46-1.86 MAX. Gain -0.58dBi PolarizationHorizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance50 Ohm Antenna Length 1 5.2mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) No. 333, Kexing Road, Xiangzhou District, Zhuhai City PCB ANT Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

JLR Gear Date: December 2, 2025 Product Model Number: 2AMG5-STG-7232-KB FCC ID: 2AMG5-STG-7232-KB To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. Signature： By: Eric Marshburn Title: Sales Manager Tel.: 510-777-9894 Email: [email protected] On behalf of: JLR Gear

JLR Gear Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 2, 2025 Subject; Request for Confidentiality FCC ID: 2AMG5-STG-7232-KB To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature： By: Eric Marshburn Title: Sales Manager

Report No: SSP25110462-1E FCC ID: 2AMG5-STG-7232-KB Annex of Test Report Annex A. EUT External Photos EUT View 1 Model : 2AMG5-STG-7232-KB EUT View 2 Report No: SSP25110462-1E FCC ID: 2AMG5-STG-7232-KB Annex of Test Report EUT View 3 Model : B-06 EUT View 4 Report No: SSP25110462-1E FCC ID: 2AMG5-STG-7232-KB Annex of Test Report EUT View 5 EUT View 6 Report No: SSP25110462-1E FCC ID: 2AMG5-STG-7232-KB Annex of Test Report EUT View 7

Report No: SSP25110462-1E FCC ID: 2AMG5-STG-7232-KB Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample Label Size: 3cm*1.5cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP25110462-1E FCC ID: 2AMG5-STG-7232-KB Annex of Test Report Annex B. EUT Internal Photos EUT Internal View 1 EUT Internal View 2 Report No: SSP25110462-1E FCC ID: 2AMG5-STG-7232-KB Annex of Test Report EUT Internal View 3 EUT Internal View 4 PCB ANT Report No: SSP25110462-1E FCC ID: 2AMG5-STG-7232-KB Annex of Test Report EUT Internal View 5

FCC ID: 2AMG5-STG-7232-KB RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For BR+EDR Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 0.21 0(±1) 1 1.25893 2402 5 0.39023 3.0 So a SAR test is not required

Report No: SSP25110462-1E FCC Test Report Page 1 of 51 FCC TEST REPORT FCC ID: 2AMG5-STG-7232-KB Report No. : SSP25110462-1E Applicant : JLR Gear Product Name : Wireless speaker Model Name : 2AMG5-STG-7232-KB Test Standard : FCC Part 15.247 Date of Issue : 2025-12-02 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25110462-1E FCC Test Report Page 2 of 51 Test Report Basic Information Applicant..................................: JLR Gear Address of Applicant...............: 2434 Research Dr, Livermore, California, United States 94550 Manufacturer..........................: JLR Gear Address of Manufacturer........: 2434 Research Dr, Livermore, California, United States 94550 Product Name.........................: Wireless speaker Brand Name.............................: - Main Model..............................: 2AMG5-STG-7232-KB Series Models..........................: - Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C6͵.ͳͲ-2020 Date of Test .............................: 2025-11-18 to 2025-11-28 Test Result...............................: PASS Tested By ................................: (Tate Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25110462-1E FCC Test Report Page 3 of 51 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results .......................................................................................................................................... 22 7. Frequency Hopping System ....................................................................................................................................... 24 7.1 St…

Text truncated - open the document above for the full version.

Report No: SSP25110462-1E FCC ID: 2AMG5-STG-7232-KB Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View Below 1GHz Report No: SSP25110462-1E FCC ID: 2AMG5-STG-7232-KB Annex of Test Report Radiated Emission Test View Above 1GHz