2AMH4M7GPSHSETRemote control

EN REGISTERONLINE www.motocaddy.com/warranty Visit www.motocaddy.com/instructions for other Motocaddy instructions including translations Distance Measurement Device (DMD) features are legal to use when local USGA and R&A rule 4.3 is in effect. Always check local and competition rules prior to commencing play IMPORTANT: Scan the QR code to ensure that your M7 GPS software remains up to date and performance is always optimised M7 GPS Electric Trolley Instruction Manual ORIGINAL VERSION Page 2 Cellular Performance Plan 5 3 1 6 4 2 Powered by next-generation cellular data technology, the Motocaddy Performance Plan is available through a low-cost annual subscription package that unlocks a selection of premium performance-enhancing features, including: 1. Full hole mapping 2. Detailed green view 3. Advanced statistic tracking 4. Performance analysis 5. Automatic course updates 6. Notification of software updates All M7 GPS owners receive a no-obligation 12-month FREE trial. Follow the on-screen prompts to get started. LEARN MORE: Scan the QR code or visit www.motocaddy.com/performance-plan Page 3 Software Updates / Locating your Serial Number / Information about DHC Locating your Serial Number The serial number is located on the trolley underside next to the motors (fig. 1). This number is required when registering your warranty online and should be kept handy for future use. The same number should also be on the box received with your trolley. Please ensure you keep hold of the packaging in case you need to return your trolley for any reason. A proof of purchase must also be kept in case your trolley requires servicing during its warranty period. Fig 1 Please keep a record of your trolley serial number here for future reference: M C M Information about DHC (Downhill Control) The letters DHC stand for ‘Downhill Control’ and mean that your trolley will maintain a controlled speed whilst travelling down hills. Whenever you are looking to move the trolley in manual mode, even if just to reposition it ready to use, always put it on a low speed setting to make it easier to steer. IMPORTANT - Software Updates The M7 GPS has been developed to include WiFi powered, Over-the-Air course and system updates. It is recommended that you always use the latest firmware to take advantage of new features, bug fixes and system improvements. Join our dedicated M7 GPS mailing list by scanning the QR code or visiting www.motocaddy.com/support/m7gps. Page 4 16 3 Equipment Overview 1 15 9 10 5 14 4 2 11 1. LCD Touchscreen Display (see page 24) 2. Manual Speed Controller & On/Off Button 3. USB Charging Port (under handle) 4. Remote Control Handset & Cradle 5. Upper Release Latch 6. Upper Bag Support 7. Battery 8. Battery Connector 9. EASILOCK ® Lower Bag Support 10. Front Wheels 11. Front Wheel Alignment Adjusters 12. Rear Wheels 13. Rear Wheel Release Button 14. Auto-Open Stand 15. Lower Release Latch 16. Motors (under Battery Tray) 17. Anti-Tip Wheel Release 18. Anti-Tip Wheel 7 8 6 13 12 17 18 Page 5 Remote Control Handset 1. Indicator LED 2. Plus (+) Button 3. Stop Button 4. Left (<) Button 5. Right (>) Button 6. Minus (-) Button 7. On/Off & Lock Button 8. Charging Port The remote handset contains a rechargeable Lithium battery. The handset can be recharged using a mini USB cable (supplied), the charging port is located under the rubber flap at the base of the handset. Once plugged in, the handset needs to be switched on using the 'On/Off' button to charge. The green LED on the handset will flash whilst being charged, once it is fully charged the green LED will be on and not flashing. This will take around 4-5 hours from empty. When the handset battery starts to get low, the LED will flash red when pressing a button. Should the battery go completely flat there will be no LED when pressing a button. Should this happen, the trolley will stop. You can recharge the handset using the USB port on the trolley. Please be aware that charging the remote handset through the USB port will take power from the main trolley battery and prolonged charging will reduce the trolley battery capacity between charges. Remote Control Handset 2 6 3 8 1 5 7 4 Page 6 Trolley Safety Safe use of your Trolley The first time you use the M7 GPS, we would advise using it on an open area of grass. The trolley speeds and steering characteristics will vary depending on the surface. The M7 GPS will turn much quicker on hard, smooth surfaces and will behave differently on grass. You will also find that the weight of the golf bag will affect both speed and steering. Motocaddy trolleys are designed for the transportation of golf bags and clubs contained within. Using the trolley for any other purpose may cause damage to the trolley and cause harm to the user. Caution and common sense should always be used. • Never aim the M7 GPS at other people or golf trolleys; • When using the M7 GPS in confined spaces (for example car parks) or near water (such as over bridges) it is advisable to use the ‘Manual’ control mode to ensure that you remain in control; • Never let the trolley run out of your sight. Always use proper care and control; • Do not attempt to transport any other equipment; • The trolley is not designed for the transportation of people; • The maximum rated load suitable for this trolley is 20kg; • Do not use the trolley to assist you when walking up hills; • Submerging the trolley in water (e.g. a lake) is likely to cause damage to the trolley; • Do not operate the trolley whilst under the influence of drugs or alcohol; • This trolley can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the trolley in a safe way and understand the hazards involved. Children shall not play with the trolley. Cleaning and user maintenance shall not be made by children without supervision; Do not a…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Motocaddy Ltd. Address Units 15 to 18, Stansted Distribution Centre, Start Hill Great Hallingbury, Hertfordshire CM22 7DG United Kingdom Grantee Code 2AMH4 FCC ID 2AMH4M7GPSHSET Authorized Contact Name Ian Gell Contact Email [email protected] Contact Phone +441279712370 I, t he undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in acc ordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1)labeling the equipment with the exact FCC ID as specified in this application, (2)compliance statement labeling pursuant to the applicable rules, (3)compliance of the equipment with the applicable technical rules, c)if t he Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept t hat they are the responsible party and agree to abide by t heir responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1)the Applicant understands, accepts and agrees t hat a sample may be requested for surveillance testing. (2)the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3)the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has r ead, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Motocaddy Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Motocaddy Ltd.] ( “the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date:2023-04-19 Print Name: Ian Gell Title: Engineering and Technology Director *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER TO: Federal Communication Commission Equipment Authorization Branch 7 435 Oakland Mills Road Columbia, MID 21046 Applicant Company Name: Grantee Code: Contact Name: Address: City /Province/Zip: Telephone: Fax: Email: Motocaddy Ltd. 2AMH4 Ian Gell Units 15 to 18, Stansted Distribution Centre, Start Hill Great Hallingbury , Hertfordshire CM22 7DG United Kingdom CM22 7DG +441279712370 +441279712370 [email protected] ATTN: Director of Certification: Date: 2023-03-24 U.S. designated agent Company Name: Motocaddy Inc FRN: 0032213274 Contact Name: Mark Kuryak Address: Motocaddy Inc., 2371 La Mirada Drive, Vista, California, United States City /Province/Zip: Telephone: Fax: Email: 92081 800.668.2162 N/A mark. [email protected] We, < Motocaddy Ltd.> and < Motocaddy Inc > understand and acknowledge the applicants consent and the designated agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < Motocaddy Ltd.> and Motocaddy Inc > acknowledge the applicant's acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant Name (Printed): Ian Gell U.S. designated agent Name (Printed): Mark Kuryak Title: President/ GM, Americas Si gnat ure : 吵 一 名 Signature:

Date: 2023-04-19 Motocaddy Ltd. TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: 2AMH4M7GPSHSET To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, t he undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Motocaddy Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Ian Gell Title: Engineering and Technology Director Signature: On behalf of Company: Motocaddy Ltd. Telephone: +441279712370

Motocaddy Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Fr om: Motocaddy Ltd. Units 15 to 18, Stansted Distribution Centre, Start Hill Great Hallingbury, Hertfordshire CM22 7DG United Kingdom Regarding: Confidentiality Request regarding application for FCC ID: 2AMH4M7GPSHSET LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request c onfidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Pr inted Name (on file with the FCC associated with the Grantee Code): I an Gell Title: Engineering and Technology Director Company Name: Motocaddy Ltd.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 4 External Photos for SHCR2304000774HS SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 4 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 4

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 3 Internal Photos for SHCR2304000774HS SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 3 EUT Constructional Details (EUT Photos) BLE Antenna SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 3

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230400077402 Page: 1 of 12 Parlam Zhan Laboratory Manager 1 Cover Page RF Exposure Evaluation Report Application No.: SHCR2304000774HS FCC ID: 2AMH4M7GPSHSET IC: 29364-M7GPSHSET Applicant: MOTOCADDY LTD. Address of Applicant: Units 15-18 Stansted Distribution Centre, Great Hallingbury, Hertfordshire, CM22 7DG, United Kingdom Manufacturer: TED GOLF EQUIPMENT CO.,LTD Address of Manufacturer: NO.65-17 Xinggang Road,Zhonglou District,Changzhou,Jiangsu,China Factory: TED GOLF EQUIPMENT CO.,LTD Address of Factory: NO.65-17 Xinggang Road,Zhonglou District,Changzhou,Jiangsu,China Equipment Under Test (EUT): EUT Name: Remote control Model No.: M7GPS HSET Trade Mark: MOTOCADDY Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 RSS-102 Issue 5 Amendment 1 (February 2, 2021) Date of Receipt: 2023-04-18 Date of Test: 2023-04-20 to 2023-05-04 Date of Issue: 2023-06-06 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230400077402 Page: 2 of 12 Revision Record Version Description Date Remark 00 Original 2023-06-06 / Authorized for issue by: Wade Zhang/Project Engineer Parlam Zhan /Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230400077402 Page: 3 of 12 2 Contents Page 1 COVER PAGE .................................................................................................................................... 1 2 CONTENTS ........................................................................................................................................ 3 3 GENERAL INFORMATION ................................................................................................................ 4 3.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................ 4 3.2 DETAILS OF E.U.T. ....................................................................................................................... 4 3.3 SEPARATION DISTANCE ................................................................................................................ 5 3.4 TEST LOCATION ............................................................................................................................ 5 3.5 TEST FACILITY .............................................................................................................................. 6 4 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .......................................................... 6 4.1 BLANKET 1 MW BLANKET EXEMPTION ........................................................................................... 6 4.2 MPE-BASED EXEMPTION .............................................................................................................. 7 4.3 SAR-BASED EXEMPTION ............................................................................................................... 8 5 IC RADIOFREQUENCY RADIATION EXPOSURE LIMITS ............................................................ 10 6 MEASUREMENT AND CALCULATION .......................................................................................... 11 6.1 MAXIMUM TRANSMIT POWER ....................................................................................................... 11 6.2 RF EXPOSURE CALCULATION ...................................................................................................... 12 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230400077402 Page: 4 of 12 3 General Information 3.1 General Description of E.U.T. Power supply: DC3.7V Li-ion Battery (340mA) S/N: MCM7MG230300315 Firmware Version: M7_BLE_REMOTE_BOOT_PLUS_APP_LONGRANGE_V6 Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 LE Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Data Rate: 1Mbps, 2Mbps Antenna Type: PCB Antenna Antenna Gain: -2.62dBi (Provided by manufacturer) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230400077402 Page: 5 of 12 3.3 Separation Distance Separation distance between the antenna to person (R): ＜5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. E&E Lab 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China. Tel: +86 21 6191 5666 Fax: +86 21 6191 5678 No tests were sub-contracted. Note: 1. SGS is not responsible for wrong test results due to incorrect information (e.g. max. clock frequency, highest internal frequency, antenna gain, cable loss, etc ) is provided by the applicant. (if applicable). 2. SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (if applicable). SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230400077402 Page: 6 of 12 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6332.01) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. is accredited by the American Association for Laboratory Accreditation(A2LA). • FCC (Designation Number: CN1301) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been recognized as an accredited testing laboratory. • ISED (CAB Identifier: CN0020) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. EMC Laboratory has been recognized by Innovatio…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230400077401 Page: 1 of 78 Parlam Zhan Laboratory Manager TEST REPORT Application No.: SHCR2304000774HS FCC ID: 2AMH4M7GPSHSET IC: 29364-M7GPSHSET Applicant: MOTOCADDY LTD. Address of Applicant: Units 15-18 Stansted Distribution Centre, Great Hallingbury, Hertfordshire, CM22 7DG, United Kingdom Manufacturer: TED GOLF EQUIPMENT CO.,LTD Address of Manufacturer: NO.65-17 Xinggang Road,Zhonglou District,Changzhou,Jiangsu,China Factory: TED GOLF EQUIPMENT CO.,LTD Address of Factory: NO.65-17 Xinggang Road,Zhonglou District,Changzhou,Jiangsu,China Equipment Under Test (EUT): EUT Name: Remote control Model No.: M7GPS HSET Trade Mark: MOTOCADDY Standard(s) : 47 CFR Part 15, Subpart C 15.247 RSS-247 Issue 2, February 2017 RSS-Gen RSS-Gen Issue 5 Amendment 2 (February 2021) Date of Receipt: 2023-04-18 Date of Test: 2023-04-20 to 2023-05-04 Date of Issue: 2023-06-06 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230400077401 Page: 2 of 78 Revision Record Version Description Date Remark 00 Original 2023-06-06 / Authorized for issue by: Wade Zhang/Project Engineer Parlam Zhan/Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230400077401 Page: 3 of 78 2 Test Summary Radio Spectrum Technical Requirement Item FCC Requirement IC Requirement Method Result Antenna Requirement 47 CFR Part 15, Subpart C 15.203 & 15.247(c) RSS-Gen Clause 6.8 N/A Customer Declaration N/A: Not applicable Radio Spectrum Matter Part Item FCC Requirement IC Requirement Method Result Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247a(2) RSS-247 Clause 5.2(a) ANSI C63.10 (2013) Section 11.8.1 Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247(b)(3) RSS-247 Clause 5.4(d) ANSI C63.10 (2013) Section 11.9.1 Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247(e) RSS-247 Clause 5.2(b) ANSI C63.10 (2013) Section 11.10.2 Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247(d) RSS-247 Clause 5.5 ANSI C63.10 (2013) Section 11.13.3.2 Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247(d) RSS-247 Clause 5.5 ANSI C63.10 (2013) Section 11.11 Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.209 & 15.247(d) RSS-247 Section 3.3 & RSS-Gen Section 8.9 ANSI C63.10 (2013) Section 6.10.5 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.209 & 15.247(d) RSS-247 Section 3.3 & RSS-Gen Section 8.9 ANSI C63.10 (2013) Section 6.4,6.5,6.6 Pass 99% Bandwidth - RSS-Gen Section 6.7 ANSI C63.10 Section 6.9.3 Pass SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230400077401 Page: 4 of 78 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 POWER LEVEL SETTING USING IN TEST: .................................................................................................. 6 4.3 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.4 MEASUREMENT UNCERTAINTY & DECISION RULE ................................................................................... 7 4.5 TEST LOCATION .................................................................................................................................... 7 4.6 TEST FACILITY ...................................................................................................................................... 8 4.7 DEVIATION FROM STANDARDS ............................................................................................................... 8 4.8 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 8 5 EQUIPMENT LIST ...................................................................................................................................... 9 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 10 6.1 ANTENNA REQUIREMENT .................................................................................................................... 10 6.1.1 Test Requirement: ....................................................................................................................... 10 6.1.2 Conclusion ................................................................................................................................... 10 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 11 7.1 CONDUCTED PEAK OUTPUT POWER .................................................................................................... 11 7.1.1 E.U.T. Operation .......................................................................................................................... 11 7.1.2 Test Mode Description ................................................................................................................. 11 7.1.3 Test Setup Diagram .............................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWA2305000063OA01 Rev.01 Page: 1 of 15 ANTENNA PASSIVE TEST REPORT Application No.SEWA2305000063OA ApplicantMOTOCADDY LTD. ManufacturerTED GOLF EQUIPMENT CO., LTD Product NameBLE Antenna Model NoM7 GPS (Remote Controller) StandardsIEEE Std 149 ™ -2021 Date Initial Sample(s) Received2023.05.30 Testing Start Date2023.05.31 Testing Finish Date 2023.05.31 Report Issue Date 2023.06.05 Comments/ Conclusion: The configuration tested complied to the certification requirements specified in this report. Rogan zhao Leno Shi Caleb Gao Report Writer Review By Authorized By The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. REVISION HISTORY SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWA2305000063OA01 Rev.01 Page: 2 of 15 Report No.VersionDateMemo SEWA2305000063OA01012023/06/05The final version of report SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWA2305000063OA01 Rev.01 Page: 3 of 15 TABLE OF CONTENTS 1.GENERAL INFORMATION................................................................4 1.1DETAILS OF CLIENT....................................................................4 1.2TEST LOCATION........................................................................4 1.3GENERAL DESCRIPTION OF EUT...............................................5 1.4TEST PROCEDURE.......................................................................5 1.5LABORATORY ENVIRONMENT....................................................5 2. OTA MEASUREMENTS SYSTEM CONFIGURATION.......................6 2.1 TEST CONFIGURATION.................................................................6 2.2 TEST MEASUREMENT....................................................................7 3.TEST EQUIPMENT LIST...................................................................8 4.MEASUREMENT UNCERTAINTY.....................................................9 5.TEST RESULTS..............................................................................10 6.3-D ANTENNA PATTERN..............................................................11 6.1 2400MHZ....................................................................................11 6.1.2 2450MHZ.................................................................................12 6.1.3 2500MHZ.................................................................................13 7.EUT AND TEST CONFIGURATION...............................................14 SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWA2305000063OA01 Rev.01 Page: 4 of 15 1.General Information 1.1Details of Client Applicant MOTOCADDY LTD. Address: Units 15-18 Stansted Distribution Centre, Great Hallingbury, Hertfordshire, CM22 7DG, United Kingdom Manufacturer TED GOLF E…

Text truncated - open the document above for the full version.