2AMIWUZ100Mobile Wi-Fi

Get To Know Your Mobile WiFi AboutMobile WiFi 1.Power Button 2.Forced Reset Button 3.Type-C USB interface 4.Power Indicator Light 5.Signal Indicator Light 6.WiFi Indicator Light 8.WPS Button 9.SIM Card Slot 10.Device Label 1.Buttons 1)Power Button: Long press the Power Button for more than 3 seconds to power on/off the device; 2)WPS Button： For devices with WPS capability, turn on the WPS connection function then long press the Mobile WiFi WPS Button for over 3 seconds. After the devices pair, complete the encryption authentication and connection between the Mobile WiFi and the wireless device. 3)Forced Reset Button：Short press to force restart and restore factory settings. Long press for more than 8 seconds to force power off. (Please do not press the Forced Reset Button by yourself without customer service support.) 2.Indicator Light Description Power On Status Power Indicator Light Continuous Red Light Low Battery Continuous Yellow Light Medium Battery Continuous Green Light High Battery Flashing by different Battery Level Charging Signal Indicator Light Continuous or Slowly Flashing Red Light SIM card or network abnormal Quickly Flashing Blue Light Wait to connect with Network Continuous Blue Light Network connected WiFi Indicator Light Slowly Flashing Blue Light WIFI open to wait Client device connection Continuous Blue Light Client device connected with WiFi Quickly Flashing Blue Light WPS Starts，automatically stops after 2 minutes,or stops after connection finish Lights out Blue Light WiFi abnormal Power Off Status Power Indicator Light Flashing Red Light Charging and Low Battery Flashing Yellow Light Charging and Medium Battery Flashing Green Light Charging and High Battery Continuous Green Light Charging is completed Signal Indicator Light Lights out Power off Status WiFi Indicator Light Lights out Power off Status System Status： Power Indicator Light Continuous Green Light System Starts up Flashing Yellow Light FOTA upgrade When System Starts up Flashing Red Ligh System Shutdown 3.How to connect a device to your Mobile Wifi Network 1） WiFi Network Manual Connection a) Find the SSID and KEY displayed on the bottom label of the Mobile WiFi device b) Enter the SSID and KEY found on the network connection of your phone or other device you want to connect to successfully connect to the network. 2） Scan WeChat QR Code Connection a) Find the Ucode QR code at the bottom of theMobileWiFidevice b)Open WeChat on your phone or other device and scan the QR code c)After the scan is completed, yourphone or other device will automatically connect to the network. 3) WPS One-click Connection a)Turn on the "WPS" function in the settings of your phone or other device you want to connect. b)Press the "WPS" button on the right side of the Mobile WiFi device to activate the WPS networking function. c)Yourphone or other device should automaticallyfind the network. After the confirmation prompt pops up on your phone or other device, click "OK" to connect to the network. Note: This feature is only available on Android devices. 4. Use of SIM card slot 1) Mobile WiFi only supports" Physical SIM ” mode. 2) In the" Physical SIM ” mode, a SIM card must be inserted to use the Mobile WiFi device. Some SIM cards also need an APN to be setup, which should be setup on the WebUI or App. The external card slot does not support switching SIM cards when the Mobile WiFi device is on. If you need to use a SIM card, restart the Mobile WiFi device after inserting or extracting an external SIM card. 5. Device Management 1）Scan the QR code below to download the app. Change password, Remote location, set APN, restart the device, etc. You can also find additional functions in the APP. 6. About the WebUI– Change your settings though your web browser 1) Connect your mobile phone or PC to theMobile WiFiWLAN network. 2) In your phone or PC's internet browser address bar, enter the address "urocomm.info" or “192.168.225.1” in the browser, the default password is: 12345678 3) After logging in, you can use the Web Page to change your password and set an APN, etc. Mobile WiFi Specifications Product Name Mobile WiFi Model No. UZ-100 Size 86mm*86mm*26mm Weight 163g Bands LTE-TDD: B38/B40/B41 LTE-FDD: B2/B4/B5/B7/B12/B17/B18 WCDMA:B2 GSM: B2/B5 WLAN Support 2.4G & 5G IEEE 802.11a/b/g/n LCD Screen Not support LCD Pixels - Touch Screen Not support Battery Type Lithium-ion 21700 battery Cell Norminal Capacity 5000mAh Cell Rated Capacity 4850mAh USB Port Input：Type-C 5V2A Output：Type-C 5V1A Bluetooth Support （This feature is coming soon） AI Not support Cloud MiFi Not support Other functions GPS，Power bank，WPS Working temperature -10°C-35°C FAQ 1. How to change the Wi-Fi name and password? First connect your mobile phone or PC device to your Mobile WiFi WLAN network , and enter“urocomm.info” or 192.168.225.1，and enter the password 12345678 in your browser to open the administration interface. Here you can change your Wi-Fi name and password. After it has been changed, remember to save it. Alternatively, you can change the Wi-Fi name and password in the UrocommAPP. 2. What should I do when my Phone/Tablet cannot connect with the device? (1) Make sure the Phone/Tablet's WLAN Wifi is turned on. (2) Refresh your device's network connection list, and search for the SSID of the device. (3) Make sure to input the correct password. (4) Disconnect your device from your current network and then reconnect. 3. What should I do when the device has no internet connection? (1) Make sure the devicestatus is normal. The signal may be weaker when in airports, mountain areas, high ways, harbors, basements, rural areas and islands. Please restart and try again after moving to a different location. (2) If you still can not get an internet connection,please contact us by email : [email protected] 4. What should I do if my device is lost？ If your device is lost accidentally, please contact customer service to freeze your account in time to avoid additional fee…

Text truncated - open the document above for the full version.

Beijing ULINK Technology Co., Ltd. Add: No.9-161, Fuqian street, Niulanshan town, Shunyi District,Beijing,China Tel: (+86)-010-64585518 Email:[email protected] Date:2020-03-19 DECLARATION OF SIMILARITY FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We Beijing ULINK Technology Co., Ltd., Hereby declare that product: Mobile WiFi, model(s): UZ-111-1 is electrically identical with the model UZ-100 that was tested by BACL.FCC ID: 2AMIWUZ100. The differences between the tested model and multiple models are as follows: They have the same PCB layout and schematic, just have different model name for marketing purpose. Please contact me should there be need for any additional clarification or information. Best Regards, Signature: Printed Name: Yanyan Li Title: Project Manager

QA-FR-170-B 7/29/2014 Company: Beijing ULINK Technology Co., Ltd. Add: No.9-161, Fuqian street, Niulanshan town, Shunyi District,Beijing,China Tel: (+86)-010-64585518 Email: [email protected] FCC Authorization 2020-04-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Beijing ULINK Technology Co., Ltd., Hereby authorizes Bay Area Compliance Laboratory Corp. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corp. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Printed Name: Yanyan Li Title: Project Manager

QA-FR-171-A Company: Beijing ULINK Technology Co., Ltd. Add: No.9-161, Fuqian street, Niulanshan town, Shunyi District,Beijing,China Tel: (+86)-010-64585518 Email: [email protected] Date:2020-04-20 FCC Confidential Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AMIWUZ100 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Beijing ULINK Technology Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description • Part List/Tune up procedure(for licensed devices) The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Yanyan Li Title: Project Manager

Label location

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS LTE Antenna Wifi & BT & GPS & DIV Antenna Battery

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”. SAR EVALUATION REPORT For Beijing ULINK Technology Co., Ltd. No.9-161, Fuqian street, Niulanshan town, Shunyi District,Beijing,China FCC ID: 2AMIWUZ100 Report Type: Original Report Product Type: Mobile WiFi Report Number: RBJ191119050-20 Report Date: 2020-05-11 Reviewed By: Rocky Xiao RF Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RBJ191119050-20 SAR Evaluation Report 2 of 103 Attestation of Test Results EUT Information EUT Description Mobile WiFi Tested Model UZ-100 Multiple Model UZ-111-1 FCC ID 2AMIWUZ100 Serial Number RBJ191119050-SA-S1 Test Date 2020-02-14~ 2020-05-08 MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) GSM 850 1g Body SAR 0.20 1.6 PCS 1900 1g Body SAR 0.78 WCDMA Band 2 1g Body SAR 0.74 LTE Band 2 1g Body SAR 0.72 LTE Band 4 1g Body SAR 1.25 LTE Band 5 1g Body SAR 0.35 LTE Band 7 1g Body SAR 0.88 LTE Band 12&17 1g Body SAR 0.32 LTE Band 18 1g Body SAR 0.23 LTE Band 40 1g Body SAR 0.32 LTE Band 41&38 1g Body SAR 0.46 WLAN 2.4G 1g Body SAR 0.16 WLAN 5.2G 1g Body SAR 0.09 WLAN 5.8G 1g Body SAR 0.24 Simultaneous 1g Body SAR 1.42 1g Body SAR 1.42 (Hotspot) Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices RF Exposure Procedures: TCB Workshop April 2019 IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-2:2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices-Human models, instrumentation, and procedures-Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximit y to the human body (frequencyrange of 30 MHz to 6 GHz) KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 648474 D04 Handset SAR v01r03 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 941225 D01 3G SAR Procedures v03r01 KDB 941225 D05 SAR for LTE Devices v02r05 KDB 941225 D06 Hotspot Mode v02r01 KDB 248227 D01 802 11 Wi-Fi SAR v02r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RBJ191119050-20 SAR Evaluation Report 3 of 103 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 EUT DESCRIPTION .................................................................................................................................................... 5 TECHNICAL SPECIFICATION ......................................................................................................................................... 5 REFERENCE, STANDARDS, AND GUIDELINES .................................................................................................. 6 SAR LIMITS ................................................................................................................................................................. 7 FACILITIES .................................................................................................................................................................. 8 DESCRIPTION OF TEST SYSTEM .......................................................................................................................... 9 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 15 EQUIPMENTS LIST & CALIBRATION INFORMATION .................................................................................................... 15 SAR MEASUREMENT SYSTEM VERIFICATION .............................................................................................. 16 LIQUID VERIFICATION ............................................................................................................................................... 16 SYSTEM ACCURACY VERIFICATION ........................................................................................................................... 21 SAR SYSTEM VALIDATION DATA ..................................................................................................................... 23 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 37 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR........................................................................ 37 CHEEK/TOUCH POSITION ........................................................................................................................................... 38 EAR/TILT POSITION .............................................................................................................................…

Text truncated - open the document above for the full version.

PROBE CALIBRATION CERTIFICATES DIPOLE CALIBRATION CERTIFICATES DIPOLE CALIBRATION CERTIFICATES

Test Plot 1 DUT: Mob Communi c Medium pa Phantom s DASY5 C o  Pr  Se  E  P h  M Area Sca n Maximum Zoom Sc a Reference Peak SAR SAR(1 g) = Maximum 1#: GSM 850 bile WiFi; Ty cation System arameters use ection: Flat S e onfiguration: robe: EX3DV ensor-Surface lectronics: DA hantom: Twin Measurement S n (71x71x1): I value of SAR an (6x6x7)/Cu Value = 13.58 (extrapolated = 0.187 W/kg value of SAR 0 dB = 0. 0_Body Back_ ype: UZ-100; m: Generic GPR d: f = 836.6 M ection V4 - SN7329; C e: 1.4mm (Mec AE4 Sn772; C n SAM; Type: SW: DASY52 Interpolated g R (interpolated ube 0: Measur 8 V/m; Power d) = 0.270 W/k g; SAR(10 g) R (measured) = .199 W/kg = - _Middle Serial: RBJ 1 RS-3 slots; Fr MHz; σ = 0.90 ConvF(9.97, 9 chanical Surfa Calibrated: 201 Tw i n S A M V , Version 52.1 grid: dx=1.500 d) = 0.207 W/k rement grid: d r Drift = -0.08 kg = 0.124 W/k g = 0.199 W/kg -7.01 dBW/kg 191119050-SA requency: 836 02 S/m; ε r = 40 9.97, 9.97) @ ace Detection 19/10/6 V5.0; Serial: T 10 (2); SEMCA 0 mm, dy=1.50 kg dx=8mm, dy=8 8 dB g g g A-S1 6.6 MHz;Duty 0.808; ρ = 100 836.6 MHz; C ) TP:1412 AD X Version 00 mm 8mm, dz=5mm Re Cycle: 1:2.66 00 kg/m 3 ; Calibrated: 20 n 14.6.12 (747 m eport No.: RBJ 6 19/10/22 70) J191119050-2 Page 1 of 12 20 21 Test Plot 2 DUT: Mob Communi c Medium pa Phantom s DASY5 C o  Pr  Se  E  P h  M Area Sca n Maximum Zoom Sc a Reference Peak SAR SAR(1 g) = Maximum 2#: GSM 850 bile WiFi; Ty cation System arameters use ection: Flat S e onfiguration: robe: EX3DV ensor-Surface lectronics: DA hantom: Twin Measurement S n (71x71x1): I value of SAR an (6x6x7)/Cu Value = 8.362 (extrapolated = 0.080 W/kg value of SAR 0 dB = 0. 0_Body Front ype: UZ-100; m: Generic GPR d: f = 836.6 M ection V4 - SN7329; C e: 1.4mm (Mec AE4 Sn772; C n SAM; Type: SW: DASY52 Interpolated g R (interpolated ube 0: Measur 2 V/m; Power d) = 0.113 W/k g; SAR(10 g) R (measured) = .101 W/kg = - t_Middle Serial: RBJ 1 RS-3 slots; Fr MHz; σ = 0.90 ConvF(9.97, 9 chanical Surfa Calibrated: 201 Tw i n S A M V , Version 52.1 grid: dx=1.500 d) = 0.108 W/k rement grid: d r Drift = -0.17 kg = 0.058 W/k g = 0.101 W/kg -9.96 dBW/kg 191119050-SA requency: 836 02 S/m; ε r = 40 9.97, 9.97) @ ace Detection 19/10/6 V5.0; Serial: T 10 (2); SEMCA 0 mm, dy=1.50 kg dx=8mm, dy=8 7 dB g g g A-S1 6.6 MHz;Duty 0.808; ρ = 100 836.6 MHz; C ) TP:1412 AD X Version 00 mm 8mm, dz=5mm Re Cycle: 1:2.66 00 kg/m 3 ; Calibrated: 20 n 14.6.12 (747 m eport No.: RBJ 6 19/10/22 70) J191119050-2 Page 2 of 12 20 21 Test Plot 3 DUT: Mob Communi c Medium pa Phantom s DASY5 C o  Pr  Se  E  P h  M Area Sca n Maximum Zoom Sc a Reference Peak SAR SAR(1 g) = Maximum 3#: GSM 850 bile WiFi; Ty cation System arameters use ection: Flat S e onfiguration: robe: EX3DV ensor-Surface lectronics: DA hantom: Twin Measurement S n (61x81x1): I value of SAR an (5x5x7)/Cu Value = 13.89 (extrapolated = 0.156 W/kg value of SAR 0 dB = 0. 0_Body Left_M ype: UZ-100; m: Generic GPR d: f = 836.6 M ection V4 - SN7329; C e: 1.4mm (Mec AE4 Sn772; C n SAM; Type: SW: DASY52 Interpolated g R (interpolated ube 0: Measur 9 V/m; Power d) = 0.261 W/k g; SAR(10 g) R (measured) = .172 W/kg = - Middle Serial: RBJ 1 RS-3 slots; Fr MHz; σ = 0.90 ConvF(9.97, 9 chanical Surfa Calibrated: 201 Tw i n S A M V , Version 52.1 grid: dx=1.500 d) = 0.175 W/k rement grid: d r Drift = -0.16 kg = 0.091 W/k g = 0.172 W/kg -7.64 dBW/kg 191119050-SA requency: 836 02 S/m; ε r = 40 9.97, 9.97) @ ace Detection 19/10/6 V5.0; Serial: T 10 (2); SEMCA 0 mm, dy=1.50 kg dx=8mm, dy=8 6 dB g g g A-S1 6.6 MHz;Duty 0.808; ρ = 100 836.6 MHz; C ) TP:1412 AD X Version 00 mm 8mm, dz=5mm Re Cycle: 1:2.66 00 kg/m 3 ; Calibrated: 20 n 14.6.12 (747 m eport No.: RBJ 6 19/10/22 70) J191119050-2 Page 3 of 12 20 21 Test Plot 4 DUT: Mob Communi c Medium pa Phantom s DASY5 C o  Pr  Se  E  P h  M Area Sca n Maximum Zoom Sc a Reference Peak SAR SAR(1 g) = Maximum 4#: GSM 850 bile WiFi; Ty cation System arameters use ection: Flat S e onfiguration: robe: EX3DV ensor-Surface lectronics: DA hantom: Twin Measurement S n (61x71x1): I value of SAR an (6x6x7)/Cu Value = 11.5 (extrapolate d = 0.082 W/kg value of SAR 0 dB = 0. 0_Body Top_M ype: UZ-100; m: Generic GPR d: f = 836.6 M ection V4 - SN7329; C e: 1.4mm (Mec AE4 Sn772; C n SAM; Type: SW: DASY52 Interpolated g R (interpolated ube 0: Measur 1 V/m; Power d) = 0.228 W/k g; SAR(10 g) R (measured) = .109 W/kg = - Middle Serial: RBJ 1 RS-3 slots; Fr MHz; σ = 0.90 ConvF(9.97, 9 chanical Surfa Calibrated: 201 Tw i n S A M V , Version 52.1 grid: dx=1.500 d) = 0.129 W/k rement grid: d r Drift = -0.12 kg = 0.056 W/k g = 0.109 W/kg -9.63 dBW/kg 191119050-SA requency: 836 02 S/m; ε r = 40 9.97, 9.97) @ ace Detection 19/10/6 V5.0; Serial: T 10 (2); SEMCA 0 mm, dy=1.50 kg dx=8mm, dy=8 2 dB g g g A-S1 6.6 MHz;Duty 0.808; ρ = 100 836.6 MHz; C ) TP:1412 AD X Version 00 mm 8mm, dz=5mm Re Cycle: 1:2.66 00 kg/m 3 ; Calibrated: 20 n 14.6.12 (747 m eport No.: RBJ 6 19/10/22 70) J191119050-2 Page 4 of 12 20 21 Test Plot 5 DUT: Mob Communi c Medium pa Phantom s DASY5 C o  Pr  Se  E  P h  M Area Sca n Maximum Zoom Sc a Reference Peak SAR SAR(1 g) = Maximum 5#: PCS 1900 bile WiFi; Ty cation System arameters use ection: Flat S e onfiguration: robe: EX3DV ensor-Surface lectronics: DA hantom: Twin Measurement S n (71x71x1): I value of SAR an (5x5x7)/Cu Value = 6.445 (extrapolated = 0.750 W/kg value of SAR 0 dB = 1. 0_Body Back_ ype: UZ-100; m: Generic GPR d: f = 1880 M ection V4 - SN7329; C e: 1.4mm (Mec AE4 Sn772; C n SAM; Type: SW: DASY52 Interpolated g R (interpolated ube 0: Measur 5 V/m; Power d) = 1.34 W/kg g; SAR(10 g) R (measured) = .12 W/kg = 0. _Middle Serial: RBJ 1 RS-4 slots; Fr MHz; σ = 1.381 ConvF(8.29, 8 chanical Surfa Calibrated: 201 Tw i n S A M V , Version 52.1 grid: dx=1.500 d) = 1.14 W/k rement grid: d r Drift = -0.11 g = 0.414 W/k g = 1.12 W/kg 49 dBW/kg 191119050-SA requency: 188 1 S/m; ε r = 38 8.29, 8.29) @ ace Detection 19/10/6 V5.0; Serial: T 10 (2); SEMCA 0 mm, dy=1.50 g dx=8mm, dy=…

Text truncated - open the document above for the full version.

Report No.: RBJ191119050-20 Page 1 of 3 aAPPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Phantom Type: Twin SAM; Model: Twin SAM V5.0; S/N: 1412 Body Back Setup Photo(10 mm) 10mm Report No.: RBJ191119050-20 Page 2 of 3 Body Front Setup Photo(10 mm) Body Left Setup Photo(10 mm) 10mm 10mm Report No.: RBJ191119050-20 Page 3 of 3 Body Top Setup Photo(10 mm) Body Bottom Setup Photo(10 mm) 10mm 10mm

FCC PART 15.247 TEST REPORT For Beijing ULINK Technology Co., Ltd No.9-161, Fuqian street, Niulanshan town, Shunyi District,Beijing,China Report Type: Original Report Product Name: Mobile WiFi Re port Number: RBJ191119050-00A Re port Date: 2020-04-15 Reviewed By: Ivan Cao Assistant mana ger Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn FCC ID: 2AMIWUZ100 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RBJ191119050-00A Page 2 of 20 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 3 TEST METHODOLOGY .................................................................................................................................................. 3 MEASUREMENT UNCERTAINTY .................................................................................................................................... 4 TEST FACILITY ............................................................................................................................................................. 4 DECLARATIONS ............................................................................................................................................................ 4 SUMMARY OF TEST RESULTS ............................................................................................................................... 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 7 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 7 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS ........................................................................................................ 7 SUPPORT CABLE LIST AND DETAILS ............................................................................................................................ 7 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 8 FCC §15.247 (i) & §1.1310 & §2.1093- RF EXPOSURE ............................................................................................ 9 APPLICABLE STANDARD .............................................................................................................................................. 9 FCC §15.203 - ANTENNA REQUIREMENT ........................................................................................................... 10 APPLICABLE STANDARD ............................................................................................................................................ 10 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 10 FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS ..................................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 EUT SETUP ................................................................................................................................................................ 11 EMI TEST RECEIVER SETUP ....................................................................................................................................... 11 TEST PROCEDURE ...................................................................................................................................................... 12 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 12 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 12 TEST DATA ................................................................................................................................................................ 12 FCC §15.209, §15.205 & §15.247(d) - SPURIOUS EMISSIONS ............................................................................. 15 APPLICABLE STANDARD ............................................................................................................................................ 15 EUT SETUP ................................................................................................................................................................ 15 EMI TEST RECEIVER & SPECTRUM ANALYZER SETUP .............................................................................................. 16 TEST PROCEDURE ..............................................................................................................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View Radiated Emission Below 1GHz View