2AN2O-RRE0BES01Robotic Vacuum Cleaner

Beijing Roborock Technology Co., Ltd. Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date:07-07-2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: 2AN2O-RRE0BES01 Beijing Roborock Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Ruby Hu Title: Project certification Manager Address: Room 1001, Floor 10, Building 3, Yard 17, Anju Road, Changping District, Beijing, P. R. China Tel.: +86 010 5324 1660 Email: [email protected]

Beijing Roborock Technology Co., Ltd. Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 07-07-2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: 2AN2O-RRE0BES01 Beijing Roborock Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Ruby Hu Title: Project certification Manager Address: Room 1001, Floor 10, Building 3, Yard 17, Anju Road, Changping District, Beijing, P. R. China Tel.: +86 010 5324 1660 Email: [email protected]

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. Beijing Roborock Technology Co., Ltd. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Da te: July 2, 2026 Signed by (Printed Name/Title): Nathan Grinager / Co-President The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Beijing Ro borock Technology Co., Ltd. Grantee FRN: 0026926923 Grantee Code: 2AN2O FCC ID: 2AN2O-RRE0BES01, 2AN2O-RRE0BES02 Contact Name: 0026926923 Street Address: Room 1001, Floor 10, Building 3, Yar d 17, Anju Road, Changping District, Beijing, P.R. China City/Province/Zip: Beijing/ P.R. China Telephone No: +86 01 0 5324 1660 Email: [email protected] Appl icant Signature: Da te:2026-07-02 Si gned by (Printed Name/Title): Ruby Hu/ Project certification manager

Beijing Roborock Technology Co., Ltd. MS-0044715Page 1 of 1Revision 1 Date: __20260707_____ Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: 2AN2O-RRE0BES01 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality RequestedExhibit Short Term PermanentBlock Diagrams Short Term n/aExternal Photo Short Term PermanentInternal Photos *** Short Term PermanentOperation Description/Theory of Operation Short Term PermanentSchematics Short Term PermanentTest Setup*** Short Term PermanentTune-Up Procedure Short Term PermanentUser’s Manual*** Short Term PermanentPart List/ Antenna Construction Beijing Roborock Technology Co., Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:____________________ ________Ruby Hu________________ (Signature/Title) (Print name) Tel: +86 010 5324 1660 Email: [email protected]

Page 1 of 1 Beijing Roborock Technology Co., Ltd. Authority to Act as Agent Date: 20260707 TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint Mr. Breeze Jiang of TÜV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Beijing Roborock Technology Co., Ltd. / Room 1001, Floor 10, Building 3, Yard 17, Anju Road, Changping District, Beijing, P. R. China For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date:20260707 Agreement is valid for 12 months from the above date. By: _________ Ruby Hu (Signature)(Print name) Project certification manager+86 010 53241660 (Title)(Telephone) On behalf of: Beijing Roborock Technology Co., Ltd. (Company Name)

XXXXXXXXXXXXXX Model/Modèle: RRE0BES Product ID: S20F51-01 Rated Input: 20V⎓1.5A FCC ID: 2AN2O-RRE0BES01 IC: 23317-RRE0BES01 HVIN: RRE0BES-FGN2 For Household Use Only. Pour usage domestique seulement. Made in China/Fabriqué en Chine Robotic Vacuum Cleaner Use with roborock EWFD71LRR or other models of docking stations indicated by user manual. À utiliser avec la station Roborock EWFD71LRR ou d’autres modèles de station de rechargement indiqué dans le manuel d’utilisation. Beijing Roborock Technology Co., Ltd. Room 1001, Floor 10, Building 3, Yard 17, Anju Road, Changping District, Beijing, P.R. China Check regional voltage before use. This product supports 120V. 电压标签 To prevent corrosion or damage, do not use any disinfectant and only use cleaning solution recommended by Roborock. 清洁液提示标签 WARNING/AVERTISSEMENT: Do not move the robot during mop washing. Ne déplacez pas le robot pendant le lavage des serpillières. 高温警示标签 Empty Wash Fill Dock For Household Use Only. Pour usage domestique seulement. Class 2 Not Wet, 20V⎓ Classe 2 non humide, 20 V ⎓ Model/Modèle: EWFD71LRR Max Input: 120V~ 60Hz 9.8A Rated Charging Input: 120V~ 60Hz 0.59A Rated Output: 20V⎓ 1.5A Beijing Roborock Technology Co., Ltd. Room 1001, Floor 10, Building 3, Yard 17, Anju Road, Changping District, Beijing, P.R. China Made in China/Fabriqué en Chine Robotic Vacuum Cleaner & Empty Wash Fill Dock Saros 20 Flow Model/Modèle/Modelo: RRE0BES+EWFD71LRR Color/Couleur/Color: Black/Noir/Negro PID: S20F51-01 G.W.: 19.2±0.3 kg (45.64±0.66 lbs.) Pkg. Size: 556×458×426 mm (21.89×18.03×16.77 inches) Manufactured for/Fabriqué pour/Fabricado para: Beijing Roborock Technology Co., Ltd. Manufactured by/Fabriqué par/Fabricado por: Huizhou Haocheng Technology Co., Ltd. Made in China/Fabriqué en Chine/Hecho en China EPA Est. No. : 104260-CHN-2 SN: RXXXXXXXXXXXXX : 1-855-960-4321 : www.roborock.com Production Address/Adresse de production/ Dirección de producción : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Production Date/Date de production/Fecha de producción: 08.2017 FCC ID: 2AN2O-RRE0BES01 IC: 23317-RRE0BES01 HVIN: RRE0BES-FGN2 8.01.2119

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN26A1GX 002 Auftrags-Nr.: Order no.: 27234857 Seite 1 von 9 Page 1 of 9 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2026-05-15 Auftraggeber: Client: Beijing Roborock Technology Co., Ltd. Room 1001, Floor 10, Building 3, Yard 17, Anju Road, Changping District, Beijing, P.R. China Prüfgegenstand: Test item: Robotic Vacuum Cleaner Bezeichnung / Typ-Nr.: Identification / Type no.: RRE0BES (Trademark: roborock) Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: CFR Title 47 FCC Part 2: Section 2.1091 FCC KDB Publication 447498 D01 v06 RSS-102 Issue 6 December 2023 Wareneingangsdatum: Date of sample receipt: 2026-05-25 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A004285282-003, 009 A004285137-005, 006 Prüfzeitraum: Testing period: 2026-06-08 - 2026-06-12 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Breeze Jiang genehmigt von: authorized by: Datum: Date: 2026-07-10 Ausstellungsdatum: Issue date: 2026-07-10 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: 2AN2O-RRE0BES01 IC: 23317-RRE0BES01 HVIN: RRE0BES-FGN2 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Shenzhen) Co., Ltd., 1601-1604, 1801-1804, Tower A Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen, 518000 Mail: [email protected] · Web: www.tuv.com V101023GCNSR X Signed by: Jonathan Li Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN26A1GX 002 Test report no.: Seite 2 von 9 Page 2 of 9 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben …

Text truncated - open the document above for the full version.

SHENZHEN SOUTH STAR TECHNOLOGY CO.,LTD QP-21-B01/A2 APPROVAL SHEET Roborock Beryl C&Beryl S Shrapnel 3.N204.0533 2026.03.07 Customer Name Product Model Customer P/N Southstar P/N Production date Revision 1.0 Southstar FICTIONDQER&D Customer PURQCR&D Manufacturers: SHENZHEN SOUTH STAR TECHNOLOGY CO.,LTD Office address : 803, Tianshu block, Xinggang tongchuanghui, No. 6099, Bao'an Avenue, Xinhe community, Fuhai street, Bao'an District, Shenzhen Production address:No. 3, Chigang Nanfang 1st Road, Humen Town, Dongguan City, Guangdong Province Tel ： 0755-27474071 0769-88086190 Http://www.southstar-tech.com Sample seal 1.1.006 SHENZHEN SOUTH STAR TECHNOLOGY CO.,LTD QP-21-B01/A2 History VersionDateChange DescriptionNote 1.0 2026.03.07 First edition SHENZHEN SOUTH STAR TECHNOLOGY CO.,LTD QP-21-B01/A2 Index 一、Cover······························1 二、Colophon·····························2 三、Index······························3 四、The basic parameters·······················4 五、Product Drawing······· ·········· ·······5 六、Test Equipment & Conditions············ ·· ·····6 七、Test Report···························7-8 八、Antennaassembly picture·····················9 九、Packing method······ ····················10 SHENZHEN SOUTH STAR TECHNOLOGY CO.,LTD QP-21-B01/A2 Antenna Specification A.Electrical Characteristics 2400MHz~ 2500MHz Frequency VSWR Efficiency Impedance Polarization Gain Note <2 >45% 50 Ohm Linear 2.4G:2.1 9dBi B.Material & Mechanical Characteristics Material of Radiator Cable Type Connector Type shrapnel 1.13 red First generation terminal C.Environmental Operation Temperature Storage Temperature -30°C ~ +65°C -40°C ~ +70°C SHENZHEN SOUTH STAR TECHNOLOGY CO.,LTD QP-21-B01/A2 Test Equipment & Conditions 1. NetWork Analyzers: Keysight E5071C 2. Comprehensive tester： CMW500 、MT8000A、MT8862A 3.3D Chamber Test System: SHENZHEN SOUTH STAR TECHNOLOGY CO.,LTD QP-21-B01/A2 Antenna Impedance:S11 QP-21-B01/A2 SHENZHEN SOUTH STAR TECHNOLOGY CO.,LTD Efficiency & Gain：

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN26A1GX 001 Auftrags-Nr.: Order no.: 27234857 Seite 1 von 24 Page 1 of 24 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2026-05-15 Auftraggeber: Client: Beijing Roborock Technology Co., Ltd. Room 1001, Floor 10, Building 3, Yard 17, Anju Road, Changping District, Beijing, P.R. China Prüfgegenstand: Test item: Robotic Vacuum Cleaner Bezeichnung / Typ-Nr.: Identification / Type no.: RRE0BES (Trademark: roborock) Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: CFR Title 47 FCC Part 15: Subpart C Section 15.207, 15.209, 15.247 RSS-247 Issue 4 July 2025 RSS-Gen Issue 5 February 2021 Wareneingangsdatum: Date of sample receipt: 2026-05-25 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A004285282-003, 009 A004285137-005, 006 Prüfzeitraum: Testing period: 2026-06-08 - 2026-06-12 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. TÜV Rheinland (Suzhou) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Breeze Jiang genehmigt von: authorized by: Datum: Date: 2026-07-10 Ausstellungsdatum: Issue date: 2026-07-10 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: 2AN2O-RRE0BES01 IC: 23317-RRE0BES01 HVIN: RRE0BES-FGN2 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Shenzhen) Co., Ltd., 1601-1604, 1801-1804, Tower A Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen, 518000 Mail: [email protected] · Web: www.tuv.com V101023GCNSR X Signed by: Jonathan Li Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN26A1GX 001 Test report no.: Seite 2 von 24 Page 2 of 24 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksicht…

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Appendix A CN26A1GX 001 Page 1 of 47 Appendix A: Test Results of Bluetooth LE APPENDIX A: TEST RESULTS OF BLUETOOTH LE ............................................................................................................. 1 APPENDIX A.1: TEST RESULTS OF 6DB BANDWIDTH .............................................................................................................. 2 Test Result ............................................................................................................................................................. 2 Test Graphs ........................................................................................................................................................... 3 APPENDIX A.2: TEST RESULTS OF 99% BANDWIDTH ............................................................................................................. 6 Test Result ............................................................................................................................................................. 6 Test Graphs ........................................................................................................................................................... 7 APPENDIX A.3: TEST RESULTS OF CONDUCTED POWER SPECTRAL DENSITY ............................................................................... 10 Test Result ........................................................................................................................................................... 10 Test Graphs ......................................................................................................................................................... 11 APPENDIX A.4: TEST RESULTS OF BAND EDGE MEASUREMENTS ............................................................................................. 14 Bluetooth LE, 1Mbps ............................................................................................................................................ 14 Bluetooth LE, 2Mbps ............................................................................................................................................ 15 APPENDIX A.5: TEST RESULTS OF CONDUCTED SPURIOUS EMISSION ....................................................................................... 16 Test Result ........................................................................................................................................................... 16 Test Graphs ......................................................................................................................................................... 17 APPENDIX A.6: TEST RESULTS OF RADIATED SPURIOUS EMISSIONS ......................................................................................... 24 30MHz - 1GHz ...................................................................................................................................................... 24 1GHz - 18GHz ....................................................................................................................................................... 26 APPENDIX A.7: TEST RESULTS OF RADIATED EMISSIONS IN RESTRICTED BANDS ......................................................................... 38 APPENDIX A.8: TEST RESULTS OF CONDUCTED EMISSION ON AC MAINS ................................................................................. 46 Prüfbericht - Produkte Test Report - Products Appendix A CN26A1GX 001 Page 2 of 47 Appendix A.1: Test Results of 6dB Bandwidth Test Result TestMode Antenna Channel DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 0.66 2401.68 2402.34 0.5 PASS 2440 0.66 2439.68 2440.34 0.5 PASS 2480 0.66 2479.68 2480.34 0.5 PASS BLE_2M Ant1 2402 1.18 2401.42 2402.60 0.5 PASS 2440 1.17 2439.42 2440.60 0.5 PASS 2480 1.17 2479.42 2480.60 0.5 PASS Prüfbericht - Produkte Test Report - Products Appendix A CN26A1GX 001 Page 3 of 47 Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Prüfbericht - Produkte Test Report - Products Appendix A CN26A1GX 001 Page 4 of 4…

Text truncated - open the document above for the full version.