2AN72-A447WIRELESS CHARGER PAD

AutoAlignPlus™ Wireless Charging (15W) Dispositif de charge sans fil AutoAlignPlus™ (15W) Instruction and Safety Booklet Livret d'instructions et de sécurité Model no: A447 IC: 26279-A447FCC ID: 2AN72-A447 EN AutoAlignPlus™ Wireless Charging Before Use • Please read this guide before using the device in order to ensure safe and proper use. • Please consult your device packaging to determine whether this product is compatible with your device. • Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information. What’s In The Box? How To Set Up Your Wireless Charger Pad 1. Choose a flat location with easy access to a working electric plug socket to power your wireless charger 2. Clean the surface from oils or dust to ensure a strong hold 3. Peel the micro-suction sticker o of the base and press down to fix into place 4. We provide a choice of 4 adapters so people all over the world can enjoy this product - choose an adapter which is right for you a. If you need to remove the EU plug, just push to release b. Keep hold of these adapters, they may come in handy if you travel abroad 5. Unravel your USB-C cable and plug it into your chosen adapter 6. Plug the other end of the cable into your Wireless Charger Pad 7. The light on your charger will flash twice showing that it’s ready to use How To Wall Mount Your Wireless Charger Pad 1. Make sure the wall you’re attaching it to is clean and free from dust 2. The adhesive we use is both strong and gentle so it will hold firmly but shouldn't damage your walls when you remove it. Keep in mind that it’s only good for one application, so when it’s up, it’s up! 3. There are two sides to the adhesive tab: a yellow side and a white side. Peel the yellow side o first and attach the pad to the base of the charger 4. Then peel o the white side and attach to the wall How To Safely And Best Use Your Wireless Charger Pad • If you’re using an accessory with your phone case, for example a Mous Card Wallet, please remove it as it may aect the charge performance • Limitless 3.0 contains magnets to allow perfect fast charging every time. Ensure magnets snap to position otherwise your mobile device may not charge properly • Ensure there are no metallic objects between the charging pad and your phone as this may interfere with the wireless charging • For best charging performance, we recommend you use the Mous supplied adapter and cable • For best results, use a Limitless 3.0 case on your mobile device • If you are not using a Limitless 3.0 case your phone won’t align into place - you will need to ensure your phone is as central as possible to get the most ecient charge LED Indication Key • White LED flashes twice: correct power has been plugged into the board • Solid white light: product is connected to charger • No light: product on standby • Constant flashing white LED light: input voltage instability/voltage stringing between circuits • We recommend you unplug your charger • Make sure you're using the Mous adapter that came with your wireless charger • If there’s still a problem when using the Mous adapter please contact us • Flashing red LED light: over voltage/low voltage/over current/over temperature/foreign object detection/circuit failure • Please check for foreign objects and remove if found • If this doesn’t solve the problem, unplug your charger and contact us Important Safety Instructions - Warning Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion, for which damages you (“Purchaser”), and not Mous Products Ltd. (“Manufacturer”) are responsible. X Do not use or store devices in high-temperature environments, including heat caused by intense sunlight or other forms of heat, as this may reduce charge eciency or reduce lifespan of the product. X Do not place product in fire or other excessively hot environments. Exposure to fire or extremely high heat may cause explosion. X This product is fitted with magnets. Pacemaker and ICD users are advised not to position the Limitless 3.0 Wireless Charger within 20 cm radius of their implanted device as it may cause interference. X Do not expose the Wireless Charger to water. Exposure to water may result in short circuiting. If short circuiting occurs immediately turn o at the wall. X Do not use the wireless charger in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons. X Do not disassemble this product or attempt to repurpose or modify it in any manner. X Do not attempt to replace any part of this device. Any modification or disassemblement may result in a void of warranty. X Use of a power supply or charger not recommended by Mous may result in a risk of fire or injury to persons. X If this device is accessible to or may be used by a minor, the purchasing adult agrees to be solely responsible for providing supervision, instruction, and warnings. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse by a minor. X All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is emitting odour, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Manufacturer. X Switch o the wireless charger when not in use. X To disconnect the charging pad from line voltage, pull the AC adapter from the AC outlet. X To comply with FCC RF exposure compliance requirements, the wireless charger must be used with a separation distance of at least 20 cm from all persons. Legal This product is meant for use only in conjunction with the appropriate device. Please consult your device packaging to determine whether this product is compatible with your particular…

Text truncated - open the document above for the full version.

C5266091_X8_Ed.1 1/1 Letter of Authorization Mous Products Limited Company: Mous Products Limited Address: WeWork Keltan House 115 Mare Street, London, E84RU, United Kingdom Product Name: WIRELESS CHARGER PAD Model Number: A447 FCC Identifier: 2AN72-A447 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Alex Peet Date: 11/27/2020 Title: Manager Signature of applicant:

C5266091_X10_Ed.1 1/1 Mous Products Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 11/27/2020 Subject: Request for Confidentiality FCC ID: 2AN72-A447 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Alex Peet Date: 11/27/2020 Title: Manager

- Page 1 of 4 - Report No.: MTi20072501-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China APPENDIX 1: EUT PHOTO Photo 1 (For model A447) Photo 2 - Page 2 of 4 - Report No.: MTi20072501-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Photo 3 Photo 4 - Page 3 of 4 - Report No.: MTi20072501-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Photo 5 Photo 6 - Page 4 of 4 - Report No.: MTi20072501-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Photo 7 Photo 8 ----END OF REPORT----

FCC ID: 2AN72-A447IC: 26279-A447 Product No. A447 Input: 5V 3A / 9V 2A / 12V 1.8A Output: 5W / 7.5W / 10W / 15W Mous is a registered trademark of Mous Products Ltd., registered in the UK. All rights reserved. Designed in London. Made in China. www.mous.co 底壳 FC77 / / 2020.7.16 镭雕 1:1 1.0 41.3mm 42.2mm 10.3*3.4mm 3rd Angle Projection

- Page 1 of 3 - Report No.: MTi20072501-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China APPENDIX 1: EUT PHOTO Photo 1 (For model A447) Photo 2 Coil Antenna - Page 2 of 3 - Report No.: MTi20072501-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Photo 3 Photo 4 - Page 3 of 3 - Report No.: MTi20072501-4E1-1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Photo 5 ----END OF REPORT----

This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. EXPOSURE REPORT FCC ID:2AN72-A447 Date of issue: Nov. 04, 2020 Report Number: MTi20072501-4E2 Sample Description: WIRELESS CHARGER PAD Mo d e l( s ) : A447 Applicant: Mous Products Limited Address: WeWork Keltan House 115 Mare Street, London, E84RU, United Kingdom Date of Test: July 31, 2020 – Sept. 11, 2020 Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 9 - Report No.: MTi20072501-4E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Test Result Certification Applicant’s name: Mous Products Limited Address: WeWork Keltan House 115 Mare Street, London, E84RU, United Kingdom Manufacture's name: Shenzhen Powerqi Technology Co., Ltd. Address: 201, 302, 401, Building A4, Block A, Fangxing Science & Tech. Park, No. 13 of BaoNan Road, Longgang Community, Longgang Street, Longgang District, Shenzhen Product name: WIRELESS CHARGER PAD Trademark: MOUS Model name: A447 Standard: FCC CFR 47 PART 1 , 1.1310 RF Exposure Procedures: KDB 680106 D01 RF Exposure Wireless Charging App v03 This device described above has been tested by Shenzhen Microtest Co., Ltd. and the test results show that the equipment under test (EUT) compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by: Demi Mu Sept. 11, 2020 Reviewed by: Leo Su Nov. 04, 2020 Approved by: Tom Xue Nov. 04, 2020 - Page 3 of 9 - Report No.: MTi20072501-4E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. 1 General Information 1.1 Description of EUT Product name: WIRELESS CHARGER PAD Brand name: MOUS Model name: A447 Series model: N/A Deference in serial model: N/A Operation frequency: 115–205 kHz Operational mode: Wireless charging Modulation type: ASK Antenna type: Coil Antenna Power source: DC 12V from adapter AC 120V/60Hz Battery: N/A Adapter information: Model: MK-P181EX Input: 100-240V~ 50/60Hz 0.5A Output: DC 5V 3A, DC 9V 2A, DC 12V 1.5A 1.2 Ancillary equipment list Equipment Model S/N Manufacturer / / / / / / / / 1.3 Measurement uncertainty Measurement Uncertainty for a Level of Confidence of 95 %, U=2xUc(y) Radiated emission(150kHz~30MHz) ± 2.5 dB Radiated emission(30MHz~1GHz) ± 4.2 dB Radiated emission (above 1GHz) ± 4.3 dB Temperature ±1 degree Humidity ± 5 % - Page 4 of 9 - Report No.: MTi20072501-4E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. 2 Testing site Test Site Shenzhen Microtest Co., Ltd Test Site Location 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. FCC Registration No.: 448573 - Page 5 of 9 - Report No.: MTi20072501-4E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. 3 List of test equipment Equipment No. Equipment Name Manufacturer Model Serial No. Calibration date Due date MTI-E060 Broadband Field Meter Narda Safety Test Solutions GmbH NBM- 520 D-1699 2020/06/22 2021/06/21 MTI-E061 Probe E-Field Narda Safety Test Solutions EF0691 H-0571 2020/06/22 2021/06/21 - Page 6 of 9 - Report No.: MTi20072501-4E2 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. 4 Test Results 4.4 Maximum permissible exposure 4.4.1 Limit Frequency range(MHz) Electric field strength(V/m) Magnetic field strength(A/m) Power density(mW/cm2) Averaging time(minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f 2 6 30-300 61.4 0.163 1.0 6 6 300-1500 f/300 6 1500-100000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1500 f/1500 30 1500-100000 1 30 f = frequency in MHz * = Plane-wave equivalent power density 4.4.2 Test Procedures E and H-field measurements should be made with the center of the probe at a distance of 15 cm surrounding the device and 20 cm above the top surface of the primary/client pair. These measurements should be repeated for three different client battery levels, 1%, 50%, and 99%. Record the test results. KDB 680106 D01 RF Exposure Wireless Charging App v03: (1) Power transfer frequency is less than 1MHz. (2) Output power from each primary coil is less than or equal to 15 watts. (3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. (4) Client device is placed directly in contact with the transmitter. (5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). (6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneo…

Text truncated - open the document above for the full version.

This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Test Report FCC ID:2AN72-A447 Date of issue: Nov. 04, 2020 Report number: MTi20072501-4E1 Sample description: WIRELESS CHARGER PAD Mo d e l( s ) : A447 Applicant: Mous Products Limited Address: WeWork Keltan House 115 Mare Street, London, E84RU, United Kingdom Date of test: July 31, 2020 – Sept. 11, 2020 Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 24 - Report No.: MTi20072501-4E1 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: [email protected] Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Table of Contents 1 GENERAL INFORMATION ................................................................................................................................... 4 1.1 FEATURE OF EQUIPMENT UNDER TEST (EUT) ................................................................................................................... 4 1.2 TEST MODE .............................................................................................................................................................. 4 1.3 EUT TEST SETUP........................................................................................................................................................ 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 SUMMARY OF TEST RESULT ............................................................................................................................... 6 2.1 OPERATION CHANNEL LIST ........................................................................................................................................... 6 2.2 TEST CHANNEL .......................................................................................................................................................... 6 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 7 3.1 TEST LABORATORY ..................................................................................................................................................... 7 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 3.3 MEASUREMENT UNCERTAINTY ...................................................................................................................................... 7 3.4 TEST SOFTWARE ........................................................................................................................................................ 7 4 LIST OF TEST EQUIPMENT .................................................................................................................................. 8 5 TEST RESULTS ..................................................................................................................................................... 9 5.1 ANTENNA REQUIREMENT ............................................................................................................................................ 9 5.1.1 Standard requirement ................................................................................................................................. 9 5.1.2 EUT Antenna ............................................................................................................................................... 9 5.2 CONDUCTED EMISSION ............................................................................................................................................. 10 5.2.1 Limits ......................................................................................................................................................... 10 5.2.2 Test Procedures ......................................................................................................................................... 10 5.2.3 Test Setup .................................................................................................................................................. 10 5.2.4 Test Result ................................................................................................................................................. 10 5.3 RADIATED EMISSION ................................................................................................................................................. 15 5.3.1 Limits ......................................................................................................................................................... 15 5.3.2 Test Procedures ......................................................................................................................................... 16 5.3.3 Test Setup .................................................................................................................................................. 17 5.3.4 Test Result ................................................................................................................................................. 17 5.4 OCCUPIED BANDWIDTH............................................................................................................................................. 21 5.4.1 Test method ....................................................................................................................…

Text truncated - open the document above for the full version.

Model: A447 Radiated emission Conducted emission