2AN72-A671Elevated Apple Watch Charger

EN Elevated Apple Watch ® Charger Before Use • Please read this guide before using the device in order to ensure safe and proper use. • Please consult your device packaging to determine whether this product is compatible with your device. • Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information. What’s In The Box? How To Set Up Your Elevated Apple Watch ® Charger 1. Carefully remove the Elevated Apple Watch ® Charger, the USB-C cable and the silicone support pad fr om the packaging. Charger. 4. Use the alignment guide to attach the silicone pad in the correct position and press down to ensure it is securely attached. 5. Unravel the USB-C cable and connect it to a power adaptor and plug the power adaptor into an outlet. 6. Insert the USB-C cable into the Elevated Apple Watch Charger. 7. Lift the fast-charging module from the back and rotate it until vertical. 8. Place your Apple Watch on the silicone support pad to start charging in Nightstand Mode. 9. If you prefer not to charge your Apple Watch in Nightstand Mode, you can also lay it flat on the charging pad without needing to raise the fast-charging module. Simply place your Apple Watch directly onto the pad with the screen facing up to begin charging. How To Connect Your Elevated Apple Watch ® Charger Using The Pogo Connector Our Elevated Apple Watch ® Charger comes with a manetic pogo connector that allows it to connect to our other charging devices with MagSafe ® , including the Charging Pad with MagSafe and the Charging Station with MagSafe. Follow these instructions to use the pogo connector: 1. Position the Elevated Apple Watch Charger near the pogo pins on the Charging Pad with MagSafe or Charging Station with MagSa fe. 2. Align the pogo connector on the Elevated Apple Watch Charger with the pogo pins on the other device. 3. The magnetic pogo connectors will pull the Elevated Apple Watch Charger into the right position. These steps will ensure that your Elevated Apple Watch Charger is properly aligneand receiving power from the other device. If the charger is connected by both pogo and USB-C, it will automatically select an input. If USB-C is removed, it will automatically switch inputs to use the pogo connector and vice versa, so you’ll never be without power. How To Safely And Best Use Your Elevated Apple Watch ® Charger •Ensure there are no metallic objects between the material top and your Apple Watch ® as this may interfere with the charging. If the foreign object detector does not activate, the device has the potential to get very hot and burn the user or damage its surroundings. •The magnetic connection between the charger and your Apple Watch ensures that you'll receive the fastest possible wireless charge every time. •For best charging performance, we recommend you use a power adaptor of 5W or more. •Designed for use with the Apple Watch range only. Do not use with any other smart watch. Important Safety Instructions – Warning Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion, for which damages you (“Purchaser”), and not Mous Products Ltd. (“Manufacturer”) are responsible. X Do not place metal objects between watch and charger as the charger may get very hot. X Do not use or store devices in high-temperature environments, including heat caused reduce lifespan of the product. X Do not place product in fire or other excessively hot environments. Exposure to fire or extremely high heat may cause explosion. X This product is fitted with magnets. Pacemaker and ICD users are advised not to position the Elevated Apple Watch ® Charger within 20cm radius of their implanted device as it may cause interference. X Do not expose the Elevated Apple Watch Charger to water. Exposure to water may X Do not use the Elevated Apple Watch Charger in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons. X Do not disassemble this product or attempt to repurpose or modify it in any manner. X Do not attempt to replace any part of this device. Any modification or disassembly may result in a void of warranty. X Use of a power supply or charger not recommended by Mous ® may result in a risk of fire or injury to persons. X f this device is accessible to or may be used by a minor, the purchas ing adult agrees to be solely responsible for providing supervision, instruction, and warnings. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse by a minor. X All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is emitting odour, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Mous. X To disconnect the Elevated Apple Watch Charger from line voltage, pull the AC adapter from the AC outlet. X To comply with FCC RF exposure compliance requirements, the Elevated Apple Watch Charger must be used with a separation distance of at least 20cm from all persons. Legal This product is meant for use only in conjunction with the appropriate device. Please consult your device packaging to determine whether this product is compatible with your particular device. Manufacturer is not responsible for any damages to any device incurred through the use of this product. Manufacturer shall not in any way be liable to use, intended or unintended, or misuse of this product in conjunction with any device or accessory other than the appropriate device for which this product is designed. as a result of misuse of this product as outlined above. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse, including …

Text truncated - open the document above for the full version.

The Watch Fast Charger Module (C962) enables accessories to charge the Apple Watch. Figure 72-1 Watch Fast Charger Module 72.1 Accessory Integration Note: Charging accessories claiming compatibility with Apple Watch Ultra shall integrate the C962. All C962 accessories shall: ● Provide power to Apple Watch. See Electrical (page 656). ● Hold the Apple Watch when it is magnetically connected to the C962. ● Permit the Apple Watch to move relative to the C962. ● Be intended for stationary use. Accessories shall not integrate the C962 into wearable accessories such as wrist straps or watch bands. 72. Apple Watch Fast Charger Module 2022-10-26 | Copyright © 2022 Apple Inc. All Rights Reserved. 652 72.2 Mechanical The C962 consists of two parts: ● An inductive coil module, see Watch Fast Charger Inductive Coil Module Dimensions (page 668). ● A control module, see Watch Fast Charger Control Module Dimensions (page 669). The control module should be mounted away from the inductive coil module to achieve the best charging performance. The accessory shall not interfere with or cause Scratches and Damage (page 53) to the body of an Apple Watch or its attached band. The accessory shall not require the watch band to be removed or detached. The accessory should be compatible with all Apple bands including the Milanese Loop and the Link Bracelet. To avoid interference with Apple Watch bands, accessories should: ● Not exceed 20 mm in radius around the center of the C962 inductive coil module surface if the Apple Watch can be attached in any orientation. ● Not exceed a length of 40 mm across the surface of the C962 inductive coil module (for a width of 40 mm) along the intended orientation of the Apple Watch if Apple Watch is intended to be attached in a specific orientation. See Figure 72-2 (page 654). 2022-10-26 | Copyright © 2022 Apple Inc. All Rights Reserved. 653 72. Apple Watch Fast Charger Module 72.2 Mechanical Figure 72-2 C962 Charging Arm Clearance 40 mm max 40 mm min The exposed surface of the C962 inductive coil module shall be 0.40 mm ±0.25 mm proud of the surface of the accessory. The C962 inductive coil module shall be mounted so any combination of Apple Watch and band shall not disengage and fall off due to gravity. The C962 inductive coil module surface may be mounted either horizontally (recommended) or vertically: ● If mounted horizontally, the surface shall be mounted so it cannot be positioned or oriented greater than 45° from horizontal. ● If mounted vertically, the surface shall have a non-adjustable mounting angle. Additionally, the accessory shall support any model of Apple Watch as well as band on its side (crown up) with a pocket or alignment feature ensuring the center of the Apple Watch aligns with the center of the C962 inductive coil module surface within ±1.0 mm. See Table 72-1 (page 655) for Apple Watch vertical alignment heights. 2022-10-26 | Copyright © 2022 Apple Inc. All Rights Reserved. 654 72. Apple Watch Fast Charger Module 72.2 Mechanical Table 72-1Apple Watch edge to center Apple Watch Edge to CenterApple Watch Size 16.64 mm38 mm (non-ceramic) 16.98 mm38 mm (ceramic) 17.21 mm40 mm (non-ceramic) 17.55 mm40 mm (ceramic) 17.39 mm41 mm (all) 18.22 mm42 mm (non-ceramic) 18.27 mm42 mm (ceramic) 18.92 mm44 mm (non-ceramic) 19.26 mm44 mm (ceramic) 19.11 mm45 mm (all) 21.11 mm49 mm (Apple Watch Ultra) Note: Apple Watch placement tolerance is typically 820 μm. This should be taken into account when designing the vertical mount alignment feature. The C962 inductive coil module shall not be mounted near ferromagnetic metals or alloys. All RF/metal keep-out zones for the Apple Watch shall be respected, see Device Dimensional Drawings (page 912). The C962 control module has the following mechanical characteristics: ● Not encapsulated in order to maximize compatibility with pick and place operations. ● FR4 PCB material. ● S70G-HF (CM) Type 4 solder is used. Solder reflow operations shall take this into consideration. ● 0-70 °C working temperature range. ● Packaged in a tray. Note: The C962 control module should be encapsulated to pass salt spray environmental testing. The C962's maximum storage temperature is 60 °C. 72.2.1 Handling Apple recommends the following handling guidelines: ● Use Pb-free solder. 2022-10-26 | Copyright © 2022 Apple Inc. All Rights Reserved. 655 72. Apple Watch Fast Charger Module 72.2 Mechanical ● Use no-clean flux. ● Mitigate handling issues by assembling onto boards directly from tray. ● Use pick and place vision systems to automate assembly. 72.3 Electrical Accessories integrating a C962 shall comply with the electrical requirements in this section. 72.3.1 Power Accessories integrating a C962 shall provide power from either: ● An internal power supply. ● An external USB power source. Components and terminations on the Watch Fast Charger Module control module shall be fully encapsulated with a rigid glue to protect C962 control module components. Apple recommends Loctite UV 9061F or equivalent. The C962 control module should be contained within a sheet metal enclosure. Thermal paste with a thermal conductivity of at least 1.5 W/mK should be used to thermally bridge the C962 control module to the sheet metal enclosure. Apple recommends Colltech N-Sil 8615 thermal paste or equivalent. If the accessory integrates an Internal Power Supply (page 657), it: ● May accept external power using any of the following integrated connectors so long as the accessory actively conditions and regulates the power: ● USB-B receptacle (Standard, Mini, Micro). ● USB-C Receptacle (page 831). ● USB-C Plug (page 829). ● Non-USB connector. ● May consume some of the external power for its own purposes so long as all C962 power requirements are met. If the accessory relies on an External USB Power Source (page 657) to provide power to the C962 and does not contain its own internal power supply, it: ● Shall connect to the external USB power source using a USB-A plug or USB-C Plug (p…

Text truncated - open the document above for the full version.

OasisCompliance,Inc.FCCID:2AN72-A671 CFR47§2.911(d)(7)FCCUSAgentLetterofAttestation Date:03-28-2023 FCCID:2AN72-A671 To:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 ToWhomItMayConcern, ThisletteristoconfirmthatwehaveacceptedtheresponsibilitytoactasUSAgentonbehalf ofMousProductsLimited.(“theapplicant”)fortheabovereferencedFCCID. Weareawareoftherequirementsandresponsibilitiesoftheapplicant’sagentforserviceof processasoutlinedintheFCCsection2.911(d)(7)andReportandOrderFCC22-84paragraph 63. U.S.AgentInformation: OasisCompliance,Inc. FRN:0033464157 JamesHe (01)2026028330 3313VerdiDr,SanJose,CA95111 Sincerelyyours, JamesHe GlobalMarketAccessManager OasisCompliance,Inc. Email:[email protected]

C5266091_X24_Ed.1 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Mous Products Limited Grantee code: 2AN72 FCC ID: 2AN72-A671 Contact Name: Jack Freethy Address: WeWork Senna Building, Gorsuch Place, London, E2 8JF, United Kingdom Telephone No: +447525834504 Fax No: +447525834504 Email: [email protected] i. [Mous Products Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Mous Products Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Date: 3.29.2023 Applicant’s Name: Jack Freethy Title: Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

CFR47§2.911(d)(7)AgentDesignationAttestation Date:03-28-2023 FCCID:2AN72-A671 To:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 MousProductsLimited (“theapplicant”)asrequiredbysection2.911(d)(7),designatesthe followingagent,locatedintheUnitedStates,forpurposesofactingastheapplicant’sagent forserviceofprocess. Theapplicantacknowledgesthattheywillmaintainanagentfornolessthanoneyearafterthe granteehasterminatedallmarketingandimportationortheconclusionofanyCommission- relatedproceedinginvolvingtheequipment.Theapplicantfurtheracknowledgestheir responsibilitytoinformtheFCCwhenevertheagentinformationchanges. U.S.AgentInformation: JamesHe OasisCompliance,Inc. (01)2026028330 3313VerdiDr,SanJose,CA95111 [email protected] Sincerelyyours, JackFreethy Manager MousProductsLimited Address:WeWorkSennaBuilding,GorsuchPlace,London,E28JF,UnitedKingdom. Email:[email protected] Phone:+447383979365

C5266091_X8_Ed.1 1/1 LetterofAuthorization Company:MousProductsLimited Address:WeWorkSennaBuilding,GorsuchPlace,London,E28JF,United Kingdom ProductName:ElevatedAppleWatch ® Charger ModelNumber:A671 FCCIdentifier:2AN72-A671 WeauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdelCarme,s/n, 08193Bellaterra,Spain,toactonourbehalfonallmattersconcerningthe abovenamedequipment. AnyindividualwithinLGAITechnologicalCenterS.A.isauthorizedtoactonour behalfandtakeactionontheapplication. WedeclarethatauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdel Carme,s/n,08193Bellaterra,Spain,isallowedtoforwardallinformation relatedtotheapprovalprojecttotheFederalCommunicationCommissionand todiscussanyissuesconcerningtheapprovalapplication.Anyandallacts carriedoutbyLGAITechnologicalCenterS.A.onourbehalfshallhavethe sameeffectasactsofourown. Name:JackFreethy Date:3/30/2023 Title: Signatureofapplicant:

C5266091_X10_Ed.1 1/1 MousProductsLimited OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:3/30/2023 Subject:RequestforConfidentiality FCCID:2AN72-A671 ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo BlockDiagram Schematics TestReportNoNo TestSetupPhotosNo User’sManual InternalPhotos PartsList/TuneUp RFExposureInfo OperationalDescription CoverLetter(s)NoNo SDRSoftware/SecurityInfoNo Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. Sincerely, Signature: Name:JackFreethyDate:3/30/2023 Title:

Page 1 of 5 Address: 101, No.7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Appendix - EUT Photos Model: A671 Page 2 of 5 Address: 101, No.7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 3 of 5 Address: 101, No.7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 4 of 5 Address: 101, No.7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 5 of 5 Address: 101, No.7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] ----End of Report----

APPLE WATCH CHARGER CONFIDENTIAL PROPERTY OF MOUS PRODUCTS LTD. 2022 DO NOT SHARE WITHOUT PERMISSION SILK PRINT GUIDE MOATIS DATE DRAWN BY 07.03.2022 MAX FREEMAN MOATIS SILK PRINT GUIDE REV NO. 31 PAGE Charging Pad with MagSafe PAD PRINTING (WHITE PANTONE SPEC) WHITE MATTE PRINT DRAWING TO 1:1 SCALE WHITE MATTE PRINT 50.50 42.50 35.00 3mm 13mm 1.7mm 42.50 FCC ID: 2AN72-A671IC: 26279-A671 Designed in London. Made in China. www.mous.co Input: Output: 5V 1A 3W Model No.A671 FCC ID: 2AN72-A671IC: 26279-A671 Designed in London. Made in China. www.mous.co Input: Output: 5V 1A 3W Model No.A671 PLEASE NOTE PRINT DIRECTION

Page 1 of 4 Address: 101, No.7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Appendix - EUT Photos Model: A671 Page 2 of 4 Address: 101, No.7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 3 of 4 Address: 101, No.7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 4 of 4 Address: 101, No.7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] ----End of Report---- Coli

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi230202015-01E2 Date of issue: 2023-03-02 Applicant: Mous Products Limited. Product: Elevated Apple Watch ® Charger Model(s): A671 FCC ID: 2AN72-A671 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 13 Report No.: MTi230202015-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 13 Report No.: MTi230202015-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Contents 1 General Description ........................................................................................................................ 5 1.1 Description of the EUT ....................................................................................................................................... 5 1.2 Description of test modes ................................................................................................................................... 5 1.3 Description of support units ................................................................................................................................ 6 2 Measurement uncertainty ............................................................................................................... 6 3 Test facilities and accreditations .................................................................................................... 7 3.1 Test laboratory .................................................................................................................................................... 7 4 List of test equipment ..................................................................................................................... 8 5 Test result ........................................................................................................................................ 9 5.2 Test setup ......................................................................................................................................................... 10 5.3 Test Procedures ................................................................................................................................................ 10 5.4 Equipment Approval Considerations item 5 b) of KDB 680106 D01 v03r01 .................................................... 11 5.5 Test results ....................................................................................................................................................... 12 Photographs of the Test Setup ............................................................................................................ 13 Photographs of the EUT....................................................................................................................... 13 Page 4 of 13 Report No.: MTi230202015-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Result Certification Applicant: Mous Products Limited. Address: WeWork Senna Building, Gorsuch Place, London, E2 8JF, United Kingdom Manufacturer: Shenzhen Powerqi Technology Co.,Ltd. Address: 201, 302, 401 , Building A4, Block A,Fangxing Science & Tech. Park, No. 13 ofBaoNan Road, Longgang Community, Longgang Street, Longgang, District, Shenzhen. Product description Product name: Elevated Apple Watch ® Charger Trademark: MOUS Model name: A671 Series Model: N/A Standards: FCC CFR 47 PART 1, § 1.1310 Test method: KDB 680106 v03r01 Date of Test Date of test: 2023-02-21 ~ 2023-03-02 Test result: Pass Test Engineer : (Yanice Xie) Reviewed By: : (Leon Chen) Approved By: : (Tom Xue) Page 5 of 13 Report No.: MTi230202015-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] 1 General Description 1.1 Description of the EUT Product name: Elevated Apple Watch ® Charger Model name: A671 Series Model: N/A Model difference: N/A Electrical rating: Input: DC 5V/1A Wireless Output: 3W Accessories: Cable: USB-C to USB-C cable (1.5m) Hardware version: PQ-LM20-L05-V10 Software version: 74E5 RF specification: Operation frequency: 326.5 kHz Modulation type: ASK Antenna type: Coil Antenna 1.2 Description of test modes All the test modes were carried out with the EUT in normal operation, the final test mode of the EUT was the worst test mode for emission test, which was shown in this report and defined as: No. Emission test modes Mode 1 Wireless Output（Watch） Mode 2 Standby The test data only show worst test mode: Mode 1 Page 6 of 13 Report No.: MTi230202015-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzh…

Text truncated - open the document above for the full version.

产品型号 版本 REV: 客户 T 客户料号 一、尺寸DIMENSION(MM) E F G H 线圈 隔磁片 磁铁 PET背胶 A 7.0±0.3 B 20.6± 0.5 C 9±0.5 D 19±0.5 E 0.7±0.1 F 1.5±0.5 G 3.8±0.5 H 0.1± 0.05 二、绕线参数Winding Specification: 线 材 Wire 圈 数 Turns 绕线方向 Winding Direction 尺寸 0.4*0.7 MM 9 TS 反绕 四、电气特性 ELECTRICAL CHARACTERISTICS: 温度 TEMPERATURE:25±10°C,湿度RELATIVE HUMIDITY :65±20% 项目 TIEM 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS IND 6.4UH±10% 100 KHZ/1.0V LCZ METER 1062B DCR 50mΩ Max LCZ METER 1062B 器件规格书

Address: 101, No.7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi230202015-01E1 Date of issue: 2023-03-02 Applicant: Mous Products Limited. Product: Elevated Apple Watch ® Charger Model(s): A671 FCC ID: 2AN72-A671 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 22 Report No.: MTi230202015-01E1 Address: 101, No. 7, Zone2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 22 Report No.: MTi230202015-01E1 Address: 101, No. 7, Zone2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Table of contents 1. General Description ........................................................................................................................ 5 Description of the EUT ............................................................................................................................................. 5 Description of test modes ......................................................................................................................................... 6 Description of support units ...................................................................................................................................... 6 Environmental conditions ......................................................................................................................................... 6 2. Measurement uncertainty ............................................................................................................... 7 3. Test laboratory ................................................................................................................................. 7 4. Summary of Test Result .................................................................................................................. 8 5. List of test equipment ..................................................................................................................... 9 6. Test Results .......................................................................................................................…

Text truncated - open the document above for the full version.