2ANDL-TCS905-3SWi-Fi and Bluetooth Module

TCS905-3S Module Datasheet Version: 20230117 Online Version Contents Contents 1 Product overview2 1.1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 1.2 Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Module interfaces4 2.1 Dimensions and footprint. . . . . . . . . . . . . . . . . . . . . . . .4 2.2 Pin definition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 2.3 Definitions of test points. . . . . . . . . . . . . . . . . . . . . . . . .7 3 Electrical parameters8 3.1 Absolute electrical parameters. . . . . . . . . . . . . . . . . . . . .8 3.2 Normal working conditions. . . . . . . . . . . . . . . . . . . . . . .8 3.3 RF power consumption. . . . . . . . . . . . . . . . . . . . . . . . .9 3.4 Working current. . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 4 RF parameters12 4.1 Basic RF features. . . . . . . . . . . . . . . . . . . . . . . . . . . .12 4.2 Wi-Fi transmission performance. . . . . . . . . . . . . . . . . . . . .12 4.3 Wi-Fi receiving performance. . . . . . . . . . . . . . . . . . . . . . .13 4.4 Bluetooth transmission performance. . . . . . . . . . . . . . . . . .13 4.5 Bluetooth receiving performance. . . . . . . . . . . . . . . . . . . .14 5 Antenna information15 5.1 Antenna type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 5.2 Antenna interference reduction. . . . . . . . . . . . . . . . . . . . .15 6 Packaging information and production instructions18 6.1 Mechanical dimensions. . . . . . . . . . . . . . . . . . . . . . . . .18 6.2 Production instructions. . . . . . . . . . . . . . . . . . . . . . . . .22 6.3 Recommended oven temperature curve. . . . . . . . . . . . . . . . .23 6.4 Storage conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . .25 7 MOQ and packaging information26 8 Appendix: Statement27 I Contents TCS905-3S is an embedded low-power Wi-Fi module that Tuya has developed. It consists of a highly integrated RF chip BK7231NSP and a few peripherals. TCS905- 3S not only supports the Wi-Fi AP and STA modes, but also supports the Bluetooth LE. 1 / 29 1 Product overview 1 Product overview TCS905-3S is built in with a 32-bit MCU whose running speed can be up to 120 MHz, 2-MBflashmemory, and 256-KBRAM,tosupport theTuyaIoTcloudconnection. The MCUinstructionsspeciallyextendedforsignalprocessingcaneffectivelyimplement audio encoding and decoding. Besides, it has rich peripherals, such as PWM and UART. There are six 32-bit PWM outputs, making the chip very suitable for high-quality LED control. 1.1 Features •Builtinwiththelow-power32-bitCPU,whichcanalsofunctionasanapplication processor •The clock rate: 120 MHz •Working voltage: 3.0 to 3.6V •Peripherals: 6 PWMs and 1 UART •Wi-Fi connectivity –802.11 b/g/n –Channels 1 [email protected] –Support WEP, WPA/WPA2, WPA/WPA2 PSK (AES), WPA3 security modes –Up to +16 dBm output power in 802.11b mode –Support STA/AP/STA+AP working mode –Support SmartConfig and AP network configuration manners for Android and iOS devices –Onboard PCB antenna with a gain of 1.3 dBi –Working temperature: -40°C to 85°C •Bluetooth connectivity –Support the transmit power of 6 dBm in the Bluetooth mode –Complete Bluetooth coexistence interface –Onboard PCB antenna with a gain of 1.3 dBi 1.2 Applications •Intelligent building •Smart household and home appliances 2 / 29 1 Product overview •Smart socket and light •Industrial wireless control •Baby monitor •Network camera •Intelligent bus 3 / 29 2 Module interfaces 2 Module interfaces 2.1 Dimensions and footprint The dimensions of TCS905-3S are 16.00±0.35 mm (W)×24.00±0.35 mm (L) ×2.8±0.15 mm (H). The dimensions of TCS905-3S are as follows: 4 / 29 2 Module interfaces 2.2 Pin definition Pin numberSymbolI/O typeFunction 1NCIDirectly connected to Pin 3. Low level reset, high level active (the pin has been pulled high internally), correspond to CEN of the IC 2ADC3AIADC pin, which corresponds to P23 of the IC 3CENIEnabling pin, which is pulled high internally to be compatible with other modules 4P14I/OA common GPIO interface, which corresponds to P14 of the IC 5P26I/OGPIOP_26, which corresponds to P26 of the IC, PWM 5 6P24I/OGPIOP_24, which corresponds to P24 of the IC, PWM 4 5 / 29 2 Module interfaces Pin numberSymbolI/O typeFunction 7P6I/OGPIOP_6，which corresponds to P6 of the IC, PWM 0 83V3PPower supply pin (3.3V） 9GNDPPower supply reference ground 10P9I/OGPIOP_9, which corresponds to P9 of the IC, PWM 3 11TXD2I/OUART2_TXD (used to display the module internal information), which corresponds to P0 of the IC 12RXD2I/OUART2_RXD, which corresponds to P1 on the internal IC 13P8I/OGPIOP_8, which corresponds to P8 of the IC, PWM 2 14P7I/OGPIOP_7, which corresponds to P7 of the IC, PWM 1 15RXD1I/OUART1_RXD (User serial port), which corresponds to P10 of the IC 6 / 29 2 Module interfaces Pin numberSymbolI/O typeFunction 16TXD1I/OUART1_TXD (User serial port), which corresponds to P11 of the IC 2.3 Definitions of test points Pin numberSymbolI/O typeFunction -CSNI/OIt is a mode selection pin. If it is connected to the ground before being powered on, enter the firmware test mode. If it is not connected or connected to VCC before being powered on, enter the firmware application mode. Correspond to P21 of the IC. Pindicatesapowersupplypin,I/Oindicatesaninput/outputpin,andAIindicates an analog input pin. 7 / 29 3 Electrical parameters 3 Electrical parameters 3.1 Absolute electrical parameters ParameterDescription Minimum value Maximum valueUnit TsStorage temperature -55125°C VBATPower supply voltage -0.33.9V ESD voltage (human body model) TAMB-25°C-44KV ESD voltage (machine model) TAMB-25°C -200200V 3.2 Normal working conditions Parameter Description Minimum value Typical value Maximum valueUnit TaWorking tempera- ture -40-85°C VBATPower supply voltage 33.33.6V VOLI/O low level output VSS-VSS+0.3V VOHI/O high level output VBAT-0. 3 -VBATV 8 / 29 3 Electrical parameters Parameter Description Minimum value Typical value Maximum …

Text truncated - open the document above for the full version.

Rev 1/26/2023 Hangzhou Tuya Information Technology Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-07-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2ANDL-TCS905-3S Hangzhou Tuya Information Technology Co.,Ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Applicant signature: Linyun Li Applicant printed name:

Rev 1/26/2023 Hangzhou Tuya Information Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023/2/6 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2ANDL-TCS905-3S Hangzhou Tuya Information Technology Co., Ltdcertifies that, as of the date of the filing of the application,Tuya Global Inc.is our designated U.S. agent for service of process for the above referenced FCC ID: 2ANDL-TCS905-3S.Hangzhou Tuya Information Technology Co., Ltdaccepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Tuya Global Inc.accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: FRN:0033411059 Name: Tuya Global Inc. Address: 3979 Freedom Circle, Suite 340, Santa Clara, CA 95054, USA Contact Person: Eric Shen Tel.: 626-215-3367 Email: [email protected] Sincerely, Hangzhou Tuya Information Technology Co., LtdTuya Global Inc. Linyun LiEric Shen

Rev 11/20/07 Hangzhou Tuya Information Technology Co.,Ltd Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ANDL-TCS905-3S Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (Block Diagram, Schematics, operation description) (Block Diagram, Schematics, operation description.pdf”) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (Internal Photos, Test Setup Photos) (Internal Photos, Test Setup Photos.pdf”) Number of days: 180 days Sincerely, (signature) (printed name) Linyun Li

C:\Users\xu-jx\Desktop\back up\Project\2022\Hangzhou Tuya Information Technology Co., Ltd\709502204666-00 TCS905-3S\report\FCC POA _Letter.docx Hangzhou Tuya Information Technology Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 01/29/2023 SUBJECT: FCC Application for FCC ID: 2ANDL-TCS905-3S To Whom It May Concern: We, the undersigned, hereby authorize Yu Anlu at TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Printed Name: Linyun Li Signature：

Company: Hangzhou Tuya Information Technology Co.,Ltd Address: Room701,Building3,More Center,No.87 GuDun Road, Hangzhou,Zhejiang, China Tel: 86-571-86581786 Fax: 86-571-86581786 Modular Approval Request FCC ID: 2ANDL-TCS905-3S The following attestation addresses the requirements to support modular approval: Modular approval requirement Yes (provide brief statement) No * (a) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly The module has a metal shied. Refer to the external photo of EUT. (b) The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal Data to the modulation circuit is buffered as described in the operational description provided with the application. (c) The module must contain power supply regulation on the module The module contains its own power supply regulation. Please refer to schematic filed with this application. (d) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) The module has a PCB antenna and which permanently attached the module. Refer to the photo of EUT. (e) The module must demonstrate compliance in a stand-alone configuration The module was tested stand- alone as shown in test setup photographs filed with this application. Company: Hangzhou Tuya Information Technology Co.,Ltd Address: Room701,Building3,More Center,No.87 GuDun Road, Hangzhou,Zhejiang, China Tel: 86-571-86581786 Fax: 86-571-86581786 (f) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) The FCC ID is printed on the label of the module. Refer to the label of EUT. (g) The module must comply with all specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements The module comply with all specific rules. Refer to the datasheet. Modular approval requirement Yes (provide brief statement) No * (h) The module must comply with RF exposure requirements Please refer exhibition RF Exposure for the compliance of MPE RF exposure rule. * Please provide a detailed explanation if the answer is “No.” Yours sincerely, Name: Title: General Manager

Company: Hangzhou Tuya Information Technology Co.,Ltd Address: Room701,Building3,More Center,No.87 GuDun Road, Hangzhou,Zhejiang, China Tel: 86-571-86581786 Fax: 86-571-86581786 WIFI Channel 12 ,13 and 14 Declaration Letter We declare the equipment identified below with regards to Channel 12,13 and 14 capabilities for FCC ID: 2ANDL-TCS905-3S Declaration Product hardware does not have the capability to operate on Channel 12,13 and 14. Product hardware has the capability to operate on Channel 12 ,13 and 14. However, these three channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 ,13 and 14. However, all the operated channels can’t be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 ,13 and 14, and meets the requirements of KDB 594280 D01 v02r01. Please note: 1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following: Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: / General Manager Signature: Phone: 86-571-86581786 Email: [email protected] Date: Jan.20,2023

External Photos Documentation Manufacturer: Hangzhou Tuya Information Technology Co.,Ltd Page 1 of 1 Product: Wi-Fi and Bluetooth Module FCC ID: 2ANDL-TCS905-3S

Label & Location Label position Label

Internal Photos Documentation Manufacturer: Hangzhou Tuya Information Technology Co.,Ltd Page 1 of 1 Product: Wi-Fi and Bluetooth Module FCC ID: 2ANDL-TCS905-3S Antenna

Report No: 709502204666-00C EMC_SHA_F_R_02.06E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 1 of 2 Rev. 20.00 MPE Calculation Applicant: Hangzhou Tuya Information Technology Co.,Ltd Address: Room701,Building3,More Center,No.87 GuDun Road,Hangzhou,Zhejiang China Product: Wi-Fi and Bluetooth Module FCC ID: 2ANDL-TCS905-3S Model No.: WXU-IPEX Reference RF report # 709502204666-00A, 709502204666-00B According to subpart 15.247(i)and subpart §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1,500 / / f/1500 30 1,500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculated Formulary: Predication of MPE limit at a given distance S = PG/4πR² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Report No: 709502204666-00C EMC_SHA_F_R_02.06E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 2 of 2 Rev. 20.00 Calculated Data for Wi-Fi Maximum peak output power at antenna input terminal (dBm): 21.41 Maximum peak output power at antenna input terminal (mW): 138.36 Prediction distance (cm): 20 Antenna Gain, typical (dBi): 1.3 Maximum Antenna Gain (numeric): 1.34 The worst case is power density at predication frequency at 20 cm (mW/cm 2 ): 0.0371 MPE limit for general population exposure at prediction frequency (mW/cm 2 ): 1.0 The max power density 0.0371 (mW/cm 2 ) < 1 (mW/cm 2 ) Result: Compliant Calculated Data for BLE Maximum peak output power at antenna input terminal (dBm): 6.01 Maximum peak output power at antenna input terminal (mW): 3.99 Prediction distance (cm): 20 Antenna Gain, typical (dBi): 1.3 Maximum Antenna Gain (numeric): 1.34 The worst case is power density at predication frequency at 20 cm (mW/cm 2 ): 0.0011 MPE limit for general population exposure at prediction frequency (mW/cm 2 ): 1.0 The max power density 0.0011 (mW/cm 2 ) < 1 (mW/cm 2 ) Result: Compliant - TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch Reviewed by: Prepared by: Tested by: _____________________ _____________________ ______________________ Hui TONG Jiaxi XU Guo Chengjie EMC Section Manager EMC Project Engineer EMC Test Engineer Date: 2023-01-04 Date: 2023-01-04 Date: 2023-01-04

EMC_SHA_F_R_02.10E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 1 of 56 Rev. 171.00 FCC - TEST REPORT Report Number : 709502204666-00A Date of Issue: Jan. 12,2023 Model : TCS905-3S Product Type : Wi-Fi and Bluetooth Module Applicant : Hangzhou Tuya Information Technology Co.,Ltd Address : Room701,Building3,More Center,No.87 GuDun Road,Hangzhou,Zhejiang China Manufacturer : Hangzhou Tuya Information Technology Co.,Ltd Address : Room701,Building3,More Center,No.87 GuDun Road,Hangzhou,Zhejiang China Test Result : ◼ Positive  Negative Total pages including Appendices : 56 TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. Report Number: 709502204666-00A EMC_SHA_F_R_02.10E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 2 of 56 Rev. 171.00 1 Table of Contents 1 Table of Contents ................................................................................................................................................................ 2 2 Details about the Test Laboratory ..................................................................................................................................... 3 3 Description of the Equipment under Test ........................................................................................................................ 4 4 Summary of Test Standards .............................................................................................................................................. 6 5 Summary of Test Results ................................................................................................................................................... 7 6 General Remarks ................................................................................................................................................................ 8 7 Test Setups .......................................................................................................................................................................... 9 8 Systems test configuration ............................................................................................................................................... 12 9 Technical Requirement .................................................................................................................................................... 13 9.1 Conducted Emission ................................................................................................................................................ 13 9.2 Conducted peak output power................................................................................................................................ 18 9.3 6dB bandwidth .......................................................................................................................................................... 19 9.4 Power spectral density ............................................................................................................................................. 23 9.5 Spurious RF conducted emissions ........................................................................................................................ 27 9.6 Band edge ................................................................................................................................................................. 37 9.7 Spurious radiated emissions for transmitter ......................................................................................................... 44 10 Test Equipment List ...................................................................................................................................................... 53 11 System Measurement Uncertainty ............................................................................................................................. 54 12 Photographs of Test Set-ups ...................................................................................................................................... 55 13 Photographs of EUT ..................................................................................................................................................... 56 Report Number: 709502204666-00A EMC_SHA_F_R_02.10E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 3 of 56 Rev. 171.00 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certif…

Text truncated - open the document above for the full version.

EMC_SHA_F_R_02.10E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 1 of 41 Rev. 171.00 FCC - TEST REPORT Report Number : 709502204666-00B Date of Issue: July 04,2022 Model : TCS905-3S Product Type : Wi-Fi and Bluetooth Module Applicant : Hangzhou Tuya Information Technology Co.,Ltd Address : Room701,Building3,More Center,No.87 GuDun Road,Hangzhou,Zhejiang China Manufacturer : Hangzhou Tuya Information Technology Co.,Ltd Address : Room701,Building3,More Center,No.87 GuDun Road,Hangzhou,Zhejiang China Test Result : ◼ Positive  Negative Total pages including Appendices : 41 TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. Report Number: 709502204666-00B EMC_SHA_F_R_02.10E TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch 3-13, No.151, Heng Tong Road, Shanghai, 200070, P.R. China Phone: +86 21 61410123, Fax:+86 21 61408600 Page 2 of 41 Rev. 171.00 1 Table of Contents 1 Table of Contents ................................................................................................................................................................ 2 2 Details about the Test Laboratory ..................................................................................................................................... 3 3 Description of the Equipment under Test ........................................................................................................................ 4 4 Summary of Test Standards .............................................................................................................................................. 6 5 Summary of Test Results ................................................................................................................................................... 7 6 General Remarks ................................................................................................................................................................ 8 7 Test Setups .......................................................................................................................................................................... 9 8 Systems test configuration ............................................................................................................................................... 12 9 Technical Requirement .................................................................................................................................................... 13 9.1 Conducted Emission ................................................................................................................................................ 13 9.2 Conducted peak output power................................................................................................................................ 18 9.3 6dB bandwidth .......................................................................................................................................................... 20 9.4 Power spectral density ............................................................................................................................................. 22 9.5 Spurious RF conducted emissions ........................................................................................................................ 24 9.6 Band edge ................................................................................................................................................................. 28 9.7 Spurious radiated emissions for transmitter ......................................................................................................... 31 10 Test Equipment List ...................................................................................................................................................... 38 11 System Measurement Uncertainty ............................................................................................................................. 39 12 Photographs of Test Set-ups ...................................................................................................................................... 40 13 Photographs of EUT ..................................................................................................................................................... 41 Report Number: 709502204666-00B EMC_SHA_F_R_02.10E TÜV SÜD Certification and Testing (China) Co., Lt…

Text truncated - open the document above for the full version.