2ANDL-T72SWi-Fi and Bluetooth Module

T7-2S Module Datasheet Version: 20260413 Online Version Contents Contents 1.Overview ...................................................... 2 1.1.Features ............................................................ 2 1.2.Scope of applications ............................................... 3 2.Module interfaces ............................................. 4 2.1.Dimensions and footprint .......................................... 4 2.2.Pinout ............................................................... 4 3.Electrical parameters .......................................... 8 3.1.Absolute electrical parameters ..................................... 8 3.2.Normal operating conditions ....................................... 8 3.3.Power consumption during continuous transmission and reception ........................................................... 9 3.4.Operating current ................................................. 11 4.RF parameters ............................................... 13 4.1.Basic RF features ................................................. 13 4.2.Transmitter (TX) performance .................................... 13 4.3.Receiver (RX) performance ....................................... 17 5.Antenna information ......................................... 20 5.1.Antenna type ...................................................... 20 5.2.Antenna interference reduction ................................... 20 6.Packing and production instructions ......................... 21 6.1.Mechanical dimensions ........................................... 21 6.2.Recommended PCB footprint ..................................... 22 6.3.Production instructions ........................................... 23 6.4.Recommended oven temperature curve ......................... 26 6.5.Storage conditions ................................................ 28 7.MOQ and packaging information ............................. 29 8.Appendix: Statement ......................................... 30 I 1Overview The T7-2S module is a Wi-Fi and Bluetooth Low Energy (LE) combo dual-band Wi- Fi 6 module developed by Tuya Smart. It consists of a highly integrated RF chip, T7, and a few peripheral components, with built-in Wi-Fi and Bluetooth network protocol stacks and various library functions. 1 / 33 1Overview 1.Overview The module is built around a low-power Armv8-MC1 MCU with 512 KB SRAM, built-in 4 MB flash memory, and various peripheral resources. T7-2S is a real-time operating system (RTOS), integrated with all Wi-Fi MAC and TCP/IP libraries. All these resources can help you develop your own embedded Wi- Fi products. 1.1.Features •Built-in low-power Armv8-MC1 CPU that also acts as an application processor. •Clock rate of up to 240 MHz. •Operating voltage: 3.3V. •Peripherals: 5 PWM pins, 1 UART (user), and 1 ADC pin. •Wi-Fi connectivity • IEEE 802.11a/b/g/n/ac/ax 1x1, 2.4 GHz and 5 GHz. •The maximum output power is +18 dBm for IEEE 802.11b and +16 dBm for • Support security protocols, including WPA2, WPA2 PSK (AES), and WPA3. 802.11a transmission. •Support STA, AP, and STA + AP combo working modes. Except for UNII-2A/2C. •Two pairing modes are supported, namely Bluetooth and AP mode. Both modes are suitable for pairing with Android and iOS mobile phones. •Onboard PCB antenna with a gain of 1.91 dBi at 2.4 GHz, and 1.53 dBi at 5 GHz. •Operating temperature range: −40°C to +85°C. •Bluetooth connectivity •Support Bluetooth 6.0. •Up to +6.5 dBm output power. •Onboard PCB antenna with a gain of 1.91 dBi at 2.4 GHz, and sharing the same antenna with Wi-Fi. •Operating temperature range: −40°C to +85°C. 2 / 33 2.2Module interfaces 1.2.Scope of applications •Smart building •Smart home and electrical appliance •Smart socket and light •Industrial wireless control •Baby monitor •IP camera •Smart bus 3 / 33 2.3Module interfaces 2.Module interfaces 2.1.Dimensions and footprint The T7-2S dimensions are 14.99±0.35 mm (W) × 17.91±0.35 mm (L) × 2.8±0.15 mm (H). The figure below shows the dimensions of the T7-2S module. 2.2.Pinout PinSymbolI/O typeFeature 13V3P Power supply pin (3.3 V). 2P4I/O GPIO_4, which supports hardware PWM, corresponding to Pin 19 on the IC. 3GNDPGround pin. 4 / 33 3.3Electrical parameters PinSymbolI/O typeFeature 4P5I/O GPIO_5, which supports hardware PWM, corresponding to Pin 18 on the IC. 5RX0I/O GPIO_10, which can be reused as the UART0_RXD pin for serial communication and firmware flashing, corresponding to Pin 24 on the IC. 6P6I/O GPIO_6, which supports hardware PWM, corresponding to Pin 17 on the IC. 7TX0I/O GPIO_11, which can be reused as the UART0_TXD pin for serial communication and firmware flashing, corresponding to Pin 25 on the IC. 5 / 33 3.3Electrical parameters PinSymbolI/O typeFeature 8ADCI/O GPIO_7, with ADC feature and 0 to 3.3V input voltage range, corresponding to Pin 16 on the IC. 9P12I/O GPIO_12, which supports hardware PWM, corresponding to Pin 26 on the IC. 10CENI/O The enable pin that is active low. The module has pulled up the high level, and users can control this pin externally. 11P14I/O GPIO_14, which supports hardware PWM, corresponding to Pin 36 on the IC. 6 / 33 3.3Electrical parameters PinSymbolI/O typeFeature TP2TX1I/O GPIO_1, which can be reused as the UART1_Log_TXD pin to send logs. After pulling it low, it will enter ATE mode when powered on. It can be configured as a normal GPIO, corresponding to Pin 20 on the IC. TP3RX1I/O GPIO_0, which can be reused as the UART1_Log_RXD pin to receive logs. It can be configured as a normal GPIO, corresponding to Pin 21 on the IC. P indicates the power pin, and I/O indicates the input and output pin. 7 / 33 3.3Electrical parameters 3.Electrical parameters 3.1.Absolute electrical parameters ParameterDescription Minimum value Maximum value Unit Ts Storage temperature −40125°C VBAT Supply voltage 33.6V Electrostatic discharge voltage (human body model) TAMB-25°C-2kV Electrostatic discharge voltage (machine model) TAMB-25°C-0.5kV 3.2.Normal operati…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Tuya Information Technology Co., Ltd Address Room 301,Building 1,Huace Center,Xihu District,Hangzhou City,Zhejiang Province, China FRN 0026759332 Grantee Code 2ANDL FCC ID: 2ANDL-T72S Authorized Contact Name Linyun Li Contact Phone +86-571-86581786 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 2026-06-16 Print Name: Linyun Li Title: Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Hangzhou Tuya Information Technology Co., Ltd Address Room 301,Building 1,Huace Center,Xihu District,Hangzhou City,Zhejiang Province, China FRN 0026759332 Grantee Code 2ANDL FCC ID: 2ANDL-T72S Authorized Contact Name Linyun Li Contact Phone +86-571-86581786 Contact Email [email protected] Hangzhou Tuya Information Technology Co., Ltd (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. Link to the Covered List: Covered List Applicant Signature: Date: 2026-06-16 Print Name: Linyun Li Title: Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Rev 1/26/2023 Hangzhou Tuya Information Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-05-06 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: 2ANDL-T72S Applicant FRN: 0026759332 [Hangzhou Tuya Information Technology Co., Ltd] certifies that, as of the date of the filing of the application, [Tuya Smart Inc.] is our designated U.S. agent for service of process for the above referenced FCC ID. [Hangzhou Tuya Information Technology Co., Ltd] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. [Tuya Smart Inc.] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Tuya Smart Inc. U.S. Agent FRN: 0034102913 Address: 160 Greentree Drive, Suite 101, Dover, DELAWARE,19904 Contact Person: Jingchao Wang Tel.: 818-699-5031 Email: [email protected] Sincerely, Hangzhou Tuya Information Technology Co.,Ltd Tuya Smart Inc. Linyun Li Jingchao Wang

< Hangzhou Tuya Information Technology Co., Ltd > To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Hangzhou Tuya Information Technology Co., Ltd Room 301,Building 1,Huace Center,Xihu District,Hangzhou City,Zhejiang Province, China Regarding: Confidentiality Request regarding application for FCC ID: 2ANDL-T72S LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions NII Software Security Info Tune up The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Linyun Li Title: Manager Company Name: Hangzhou Tuya Information Technology Co., Ltd

< Hangzhou Tuya Information Technology Co., Ltd > Date: 2026-06-16 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: 2ANDL-T72S To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Hangzhou Tuya Information Technology Co., Ltd This authorization is valid until further written notice from the applicant. Name (Printed): Linyun Li Title: Manager Signature: On behalf of Company: Hangzhou Tuya Information Technology Co., Ltd Telephone: +86-571-86581786

Hangzhou Tuya Information Technology Co., Ltd Cover Letter-Modular Approval FCC ID: 2ANDL-T72S Date: 2026-06-16 Gentlemen: There’s a Wi-Fi and Bluetooth Module that would like to have your authorization as a modular approval. The specific product as below, radar Module with its designed features and specified description, meets special requirements for Full modular approval on FCC KDB996369 by cross-reference list below. Company Hangzhou Tuya Information Technology Co., Ltd Model Name Wi-Fi and Bluetooth Module Model Number T7-2S FCC ID 2ANDL-T72S Requirement of FCC KDB996369 Comply（Y/N） 1. The modular transmitter must have its own RF shielding. Y The EUT has its own RF shielding. Please refer to EUT Photos. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Y The EUT uses the chip: BK7239N as an embedded processor to buffer the data. Please refer to Schematics. 3. The modular transmitter must have its own power supply regulation. Y The EUT has its own power supply regulation, The power supply of this module is 3.3V. Please refer to Schematics. 4. The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. Y The EUT meets the FCC antenna requirements; The photo of antenna is shown in the test report. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. Y The EUT was tested with a test cable, see test report and setup photo 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: 2ANDL-T72S” or “Contains FCC ID: 2ANDL-T72S” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter Y Please see exhibition label sample for the FCC ID of this module. And also in the exhibition User’s manual, there are instructions to the OEM on how to label the end product. Hangzhou Tuya Information Technology Co., Ltd case, a copy of these instructions must be included in the application for equipment authorization. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Y The EUT is compliant with all applicable FCC rules. Details instructions for maintaining compliance are given in the User Manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Y The EUT complies with RF exposure requirement. Thank you. Sincerely, Print Name: Linyun Li Title: Manager Signature: On behalf of Company: Hangzhou Tuya Information Technology Co., Ltd Telephone: +86-571-86581786

Page: 1 of 2 Appendix_External Photos for SUCR2604000344MO Test Model No.: T7-2S Page: 2 of 2 EUT Constructional Details (EUT Photos) - End of the Report -

Page 1 of 1

Page: 1 of 2 Appendix_Internal Photos for SUCR2604000344MO Test Model No.: T7-2S Page: 2 of 2 EUT Constructional Details (EUT Photos) - End of the Report -

Report No.: SUCR260400034404 Page: 1 of 12 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, please contact us at telephone:(86-755) 8307 1443, or email: [email protected] RF Exposure Evaluation Report Application No.: SUCR2604000344MO Applicant: Hangzhou Tuya Information Technology Co., Ltd. Address of Applicant: Room 301,Building 1,Huace Center,Xihu District,Hangzhou City,Zhejiang Province, China Manufacturer: Hangzhou Tuya Information Technology Co., Ltd. Address of Manufacturer: Room 301,Building 1,Huace Center,Xihu District,Hangzhou City,Zhejiang Province, China Equipment Under Test (EUT): EUT Name: Wi-Fi and Bluetooth Module Model No.: T7-2S FCC ID: 2ANDL-T72S Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2026-04-10 Date of Issue: 2026-05-28 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: SUCR260400034404 Page: 2 of 12 Revision Record Version Description Date Remark 00 Original 2026-05-28 / Authorized for issue by: Tested By Hayley Zhang/Project Engineer Approved By Cedar Cheng /Reviewer Report No.: SUCR260400034404 Page: 3 of 12 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 Contents ................................................................................................................................................... 3 3 General Information ................................................................................................................................ 4 3.1 Details of E.U.T. ............................................................................................................................... 4 3.2 Separation Distance ......................................................................................................................... 5 3.3 Test Location .................................................................................................................................... 6 3.4 Test Facility ...................................................................................................................................... 6 3.5 Deviation from Standards ................................................................................................................. 6 3.6 Abnormalities from Standard Conditions .......................................................................................... 6 4 RF Exposure Test Exemptions .............................................................................................................. 7 4.1 RF Exposure Test Exemptions for single RF sources ..................................................................... 7 4.2 RF Exposure Test Exemptions for Simultaneous Transmission ...................................................... 9 5 Measurement and Calculation ............................................................................................................. 11 5.1 Maximum transmit power ............................................................................................................... 11 5.2 RF Exposure Calculation................................................................................................................ 11 Report No.: SUCR260400034404 Page: 4 of 12 3 General Information 3.1 Details of E.U.T. BLE: Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V6.0 Modulation Type: GFSK Number of Channels: 40 Rates Type: 2MHz Channel Spacing: 125K/500K/1M/2M Antenna Type: PCB Antenna Antenna Gain: 1.91dBi (Provided by the manufacturer) 2.4GWIFI: Operation Frequency: 802.11b/g/n(HT20)/ax(HEW20): 2412MHz to 2462MHz; 802.11n(HT40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (DBPSK, DQPSK, CCK); 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM); 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM) Number of Channels: 802.11b/g/n(HT20)/ax(HEW20): 11; 802.11n(HT40): 7 Channel Spacing: 5MHz Antenna Type: PCB Antenna Antenna Gain: 1.91dBi (Provided by the manufacturer) 5GWIFI: Operation Frequency/Number of channels (20MHz): U-NII-1: 5180-5240MHz (4 Channels); U-NII-2A: 5260-5320MHz (4 Channels); U-NII-2C: 5500-5700MHz (11 Channels); U-NII-3: 5745-5825MHz (5 Channels) Operation Frequency/Number of channels/(40MHz): U-NII-1: 5190-5230MHz (2 Channels); U-NII-2A: 5270-5310MHz (2 Channels); U-NII-2C: 5510-5670MHz (5 Channels); U-NII-3: 5755-5795MHz (2 Channels) Modulation Type: 802.11a: OFDM (BPSK, QPSK, 16QAM, 64QAM); 802.11n: OFDM (BPSK, QPSK, 16QAM, 64QAM); 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM); 802.11ax: OFDMA (BPSK, QPSK, 16…

Text truncated - open the document above for the full version.

Antenna Specification Manufacture：TUYA Product Name：T7-2S Antenna Antenna Type：PCB Test Date：2026.03.02 Tested by：WangZengQuan Approved by：Licco Content 1.General Description ................................................................................. 1 2.Test Configurations .................................................................................. 2 2.1 Test Environment ............................................................................ 2 2.2 Test Equipment ............................................................................... 2 2.3 Test Principle ................................................................................... 4 3.Test Results .............................................................................................. 4 3.1 Gain and Efficiency.......................................................................... 4 3.2 Radiation Pattern ............................................................................ 6 4.Antenna Dimensions ............................................................................... 8 5.EUT Photo................................................................................................ 9 6.Test Setup Photo .................................................................................... 10 1 1.General Description Manufacturer Hangzhou Tuya Information Technology Co.,Ltd Address Room 701,Building 3,More Center,No.87 GuDun Road, Hangzhou, Zhejiang,China Test Location Room 106, Building 3, Letong Science Park, No. 500, Qiuyi Road, Binjiang District, Hangzhou Product Name T7-2S Antenna Product model T7-2S Antenna Type PCB Antenna Test Items Gain; Efficiency; Radiation Pattern Test Frequency 2400-2500MHz 5150-5850MHz Test Standard ANSI/IEEE Std 149-1979 2 2.Test Configurations 2.1 Test Environment Temperature (°C) 25 Humidity (%RH) 60 Atmospheric Pressure (kPa) 100.5 2.2 Test Equipment Test itens Test equipment S Parameter 1.Retum Loss 2.VSWR Network analyzer （Agilent E5071B） (Calibration date: November 10, 2025 - November 09, 2026) Passive test 1.Frequency 2.Gain 3.Radiation Pattern 1.3Dmicrowave darkroom （5m*4m*4m） 2.Network analyzer （Agilent E5071B） (Calibration date: November 10, 2025 - November 09, 2026) Active test 1. TRP 2. TIS 1.3Dmicrowave darkroom （5m*4m*4m） 2.Comprehensive test instrument (CMW500) (Calibration date: November 09, 2025 - November 08, 2026) The passive test results are obtained by collecting the near-field data of the DUT spherical surface through multiple probes, and then calculating the 3 directivity of the DUT through the near-far field conversion formula. Finally, the gain and efficiency are calculated through the directivity coefficient on the directivity diagram. Test software：PassiveTest.exe Darkroom coordinates Test antenna CMW500 Agilent E5071B 4 2.3 Test Principle 3.Test Results 3.1 Gain and Efficiency Frequency (MHz) Peak Gain (dBi) Efficiency (%) 2400 1.66 43.75 2410 1.91 43.95 2420 1.79 43.05 2430 1.50 37.24 2440 1.67 40.36 2450 1.54 37.93 2460 1.56 37.93 5 2470 1.74 31.7 2480 1.11 28.38 2490 0.79 28.12 2500 1.08 29.44 5150 -2.28 32.66 5250 -1.64 35.56 5350 -0.94 38.55 5450 -0.55 41.11 5550 0.3 41.69 5650 0.8 43.65 5750 1.05 39.45 5850 1.53 41.02 6 3.2 Radiation Pattern Phi 0 2D Phi 90 2D Theta 90 2D 2400MHz 3D 放类似图Z轴朝上 7 2450MHz 3D 2500MHz 3D 5150MHz 3D 5450MHz 3D 8 5800MHz 3D 4.Antenna Dimensions 9 5.EUT Photo 10 6.Test Setup Photo

Report No.: SUCR260400034403 Page: 1 of 288 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the aut…

Text truncated - open the document above for the full version.