2ANFN-2800-75BKRPET MagClick Fast Wireless JournalBook

Reclaim MagClick® Fast Wireless JournalBook Instruction Manual 2800-75BK 1. 2. 3. 4. 5. 6. 7. 8. Wirelss Charging Surface with MagClick® Type-C Port Indicator Light JournalBook Pen Loop Card Case Phone Pocket Wireless Charging Surface Stand WARNING-When using this product, basic precautions should always be followed: Read all the instructions before use. Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C). Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time. To reduce the risk of injury, close supervision is required when the product is used near children. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above the Do not use the device if damaged or Do not disassemble the device. For professional. incorrect reassembly may or temperatures above 104°F may cause explosion. use only identical replacement parts to ensure product safety. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove any attachments from the phone before charging on this device, attachments can interfer with wireless charging and lead to over heating. • 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. SAFETY PRECAUTIONS: 13 The strong magnetic fields of neodymium magnets can damage items such as television, computer monitors, credit cards, bank cards, computers, diskettes and other data carriers, video tapes, mechanical This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: approved by the party responsible for compliance could void the user’s authority to operate the equipment. (1) (2) * FCC Statement: MADE IN CHINA watches, hearing aids, loud speakers and VCRs. Pace-makers may be damaged or switch to "Test Mode" in the presence of a strong magnetic force, if a pace-maker or other electrical body implant is in use, keep a minimum of 3 feet distance. 165.1*94mm Tech Specifications • Type-C Input: 9V/2A • Wireless Output: 5W/7.5W/10W/15W Instructions: Wireless Charging Mobile phones and other electronic devices •Ensure that your device supports wireless charging , it will be listed in the manufacture’s specifications. •Connect the provied charging cable to a power source and to the Type-C port on the top side of the wireless charging surface, once connected , the LED indicator will turn RED. •Place the wireless charging supported device on the wireless charging surface. •if the device support MagClick® function, it will easy to be fixed on the correct location and begin to charge automatically, indicator will glow blue in charging. •If the device does not support MagClick® function, Adjust the device to the correct location ,phone will begin to charge automatically. indicator will glow blue in charging. •Once Fully charged , remove the device. **Note: •Open the stand on the backside of wireless charging surface in case of needed. • In order to charge devices, using only the accessory cable or the cable included with your own device by the manufacture.

Anhui Inno-Sign International Co., Ltd Room 1409-1410, Building B, Sky Blue Business Center, No.188 South Qianshan Road, Hefei, Anhui, China Declaration Letter Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 1/3/2023 FCC ID: 2ANFN-2800-75BK Pursuant to KDB 680106 of the Anhui Inno-Sign International Co., Ltd. Hereby declare our product which is an inductive wireless power transfer applications that meet all of the following requirements are not required to submit a KDB inquiry for devices approved usinga PAG for equipment approved using certification to address RF exposure compliance. 1) Power transfer frequency is 0.111-0.205MHz which is less than1 MHz 2) Output power from single primary coil is equal to 15 watts max 3) The system consist of one source primary coils, charging one clients. 4) Client device is placed directly in contact with the transmitter 5) The EUT is a mobile device. 6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yours sincerely, Company Officer: Linda Mei Telephone Number: +86-551-65879511 Email: [email protected]

Anhui Inno-Sign International Co., Ltd Room 1409-1410, Building B, Sky Blue Business Center, No.188 South Qianshan Road, Hefei, Anhui, China Agent Authorization Company: Anhui Inno-Sign International Co., Ltd Address: Room 1409-1410, Building B, Sky Blue Business Center, No.188 South Qianshan Road, Hefei, Anhui, China Product Name: RPET MagClick Fast Wireless JournalBook Model Number(s): 2800-75BK, 240653 Product Description: RPET MagClick Fast Wireless JournalBook We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Dec. 28, 2022 Name: Linda Mei Title: General Manager Company: Anhui Inno-Sign International Co., Ltd

Anhui Inno-Sign International Co., Ltd Room 1409-1410, Building B, Sky Blue Business Center, No.188 South Qianshan Road, Hefei, Anhui, China Dec. 28, 2022 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: 2ANFN-2800-75BK Models: 2800-75BK, 240653 To Whom It May Concern: We, The Anhui Inno-Sign International Co., Ltd hereby declare that the model : 2800-75BK is identical with the model : 240653, except the model name. Except for the different above, no other modification is performed. Sincerely, Anhui Inno-Sign International Co., Ltd Signature: [Linda Mei, General Manager]

Report No.: AGC05794221201AP02 Page 1 of 4 EXTERNAL PHOTOS ALL VIEW OF EUT TOP VIEW OF EUT Report No.: AGC05794221201AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC05794221201AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC05794221201AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report****************************************

FCC ID Label Location 10mm*20mm FCC ID: 2ANFN-2800-75BK

Report No.: AGC05794221201AP02 Page 1 of 3 INTERNAL PHOTOS OPEN VIEW OF EUT INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC05794221201AP02 Page 2 of 3 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) WPT Antenna Report No.: AGC05794221201AP02 Page 3 of 3 ANTENNA CLOSE-UP PHOTO-1 ****************************************End of Report****************************************

Page 1 of 13 RF Exposure Report Report No.: AGC05794221201FH01 FCC ID : 2ANFN-2800-75BK APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : RPET MagClick Fast Wireless JournalBook BRAND NAME : N/A MODEL NAME : 2800-75BK, 240653 APPLICANT : Anhui Inno-Sign International Co., Ltd DATE OF ISSUE : Dec. 28, 2022 STANDARD(S) : KDB680106 D01 RF Exposure Wireless Charging Base App v03r01 REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC05794221201FH01 Page 2 of 13 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 28, 2022 Valid Initial Release Report No.: AGC05794221201FH01 Page 3 of 13 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................................................................................. 4 2. PRODUCT INFORMATION .............................................................................................................................. 5 2.1 PRODUCT TECHNICAL DESCRIPTION ................................................................................................ 5 2.2 TEST FREQUENCY LIST ........................................................................................................................ 5 3. TEST ENVIRONMENT ..................................................................................................................................... 6 3.1 ADDRESS OF THE TEST LABORATORY .............................................................................................. 6 3.2 TEST FACILITY ....................................................................................................................................... 6 3.3 ENVIRONMENTAL CONDITIONS........................................................................................................... 7 3.4 MEASUREMENT UNCERTAINTY .......................................................................................................... 7 3.5 LIST OF EQUIPMENTS USED ............................................................................................................... 7 4. EQUIPMENT USED IN TESTED SYSTEM ...................................................................................................... 8 5. DESCRIPTION OF TEST MODES ................................................................................................................... 8 6. RF EXPOSURE MEASUREMENT ................................................................................................................... 9 6.1 REFER EVALUATION METHOD ............................................................................................................. 9 6.2 TEST LIMITS ........................................................................................................................................... 9 6.3 MEASUREMENT SETUP ...................................................................................................................... 10 6.4 MEASUREMENT PROCEDURE ............................................................................................................ 11 6.5 MEASUREMENT RESULTS ................................................................................................................. 12 APPENDIX A: PHOTOGRAPHS OF TEST SETUP .......................................................................................... 13 Report No.: AGC05794221201FH01 Page 4 of 13 1. GENERAL INFORMATION Applicant Anhui Inno-Sign International Co., Ltd Address Room 1409-1410, Building B, Sky Blue Business Center, No.188 South Qianshan Road, Hefei, Anhui, China Manufacturer DONGGUAN COHESION LEATHER GOODS CO., LTD Address ROOM 101, BUILDING 2, NO.37 TAOYUAN ROAD, NANSHE DISTRICT, CHASHAN TOWN, DONGGUAN, GUANGDONG, CHINA Factory DONGGUAN COHESION LEATHER GOODS CO., LTD Address ROOM 101, BUILDING 2, NO.37 TAOYUAN ROAD, NANSHE DISTRICT, CHASHAN TOWN, DONGGUAN, GUANGDONG, CHINA Product Designation RPET MagClick Fast Wireless JournalBook Brand Name N/A Test Model 2800-75BK Series Model 240653 Declaration Difference All the same except for the model name Date of receipt of test item Dec. 13, 2022 Date of test Dec. 13, 2022 to Dec. 26, 2022 Deviation from Standard No any deviation from the test method Test Result Pass Prepared By Bibo Zhang (Project Engineer) Dec. 28, 2022 Reviewed By Calvin Liu (Reviewer) Dec. 28, 2022 Approved By Max Zhang (Authorized Officer) Dec. 28, 2022 Report No.: AGC05794221201FH01 Page 5 of 13 2. PRODUCT INFORMATION 2.1 PRODUCT TECHNICAL DESCRIPTION Equipment Specification WPT Operation Frequency 111KHz-205KHz Hardware Version V1.0 Software Version V1.0 Modulation Type ASK Number of channels 1 Field Strength of Fundamental 68.01dBuV/m (Max) Antenna Designation Coil Antenna Antenna Gain 0dBi Power Supply Type-C Input: 9V/2A Wireless Charging Output Power 5W/7.5W/10W/15W 2.2 TEST FREQUENCY LIST Frequency Band Channel Number Test Frequency 111KHz-205KHz 01 143.8 KHz Report No.: AGC05794221201FH01 Page 6 of 13 3. TEST ENVIRONMENT 3.1 ADDRESS OF THE TEST LABORATORY Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 TEST FACILITY The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to be in compliance with CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements) for the Competence of Testing and Calibration Laboratories. A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2017 General Requirement…

Text truncated - open the document above for the full version.

Page 1 of 30 FCC Test Report Report No.: AGC05794221201FE10 FCC ID : 2ANFN-2800-75BK APPLICATION PURPOSE Original Equipment PRODUCT DESIGNATION : RPET MagClick Fast Wireless JournalBook BRAND NAME : N/A MODEL NAME : 2800-75BK, 240653 APPLICANT : Anhui Inno-Sign International Co., Ltd DATE OF ISSUE : Dec. 28, 2022 STANDARD(S) : FCC Part 15 Subpart C REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC05794221201FE10 Page 2 of 30 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 28, 2022 Valid Initial Release Report No.: AGC05794221201FE10 Page 3 of 30 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................................................................................. 5 2. PRODUCT INFORMATION .............................................................................................................................. 6 2.1 PRODUCT TECHNICAL DESCRIPTION ................................................................................................ 6 2.2 TEST FREQUENCY LIST ........................................................................................................................ 6 2.3 RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................. 7 2.4 TEST METHODOLOGY .......................................................................................................................... 7 2.5 SPECIAL ACCESSORIES ....................................................................................................................... 7 2.6 EQUIPMENT MODIFICATIONS .............................................................................................................. 7 2.7 ANTENNA REQUIREMENT .................................................................................................................... 7 3. TEST ENVIRONMENT ..................................................................................................................................... 8 3.1 ADDRESS OF THE TEST LABORATORY .............................................................................................. 8 3.2 TEST FACILITY ....................................................................................................................................... 8 3.3 ENVIRONMENTAL CONDITIONS........................................................................................................... 9 3.4 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 3.5 LIST OF EQUIPMENTS USED ............................................................................................................. 10 4.SYSTEM TEST CONFIGURATION .................................................................................................................. 11 4.1 EUT CONFIGURATION .......................................................................................................................... 11 4.2 EUT EXERCISE ...................................................................................................................................... 11 4.3 CONFIGURATION OF TESTED SYSTEM ............................................................................................. 11 4.4 EQUIPMENT USED IN TESTED SYSTEM............................................................................................ 11 4.5 SUMMARY OF TEST RESULTS ........................................................................................................... 12 5. DESCRIPTION OF TEST MODES ................................................................................................................. 13 6. FIELD STRENGTH OF FUNDAMENTAL ...................................................................................................... 14 6.1 PROVISIONS APPLICABLE .................................................................................................................. 14 6.3 FIELD STRENGTH CALCULATION ...................................................................................................... 16 6.4 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 17 6.5 MEASUREMENT RESULTS.................................................................................................................. 18 7. 20 dB BANDWIDTH ....................................................................................................................................... 24 7.1 PROVISIONS APPLICABLE .................................................................................................................. 24 7.2 MEASUREMENT PROCEDURE ........................................................................................................... 24 7.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 24 7.4 MEASUREMENT RESULTS.................................................................................................................. 25 8. AC POWER LINE CONDUCTED EMISSION TEST ...................................................................................... 26 8.1 LIMITS OF LINE CONDUCTED EMISSION TEST ............................................................................... 26 8.2 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 26 Report No.: AGC05794221201FE10 Page 4 of 30 8.3 PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST .......................................... 27 8.4 FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST ........................................................ 27 8.5 MEASUREMENT RESULTS.................................................................................................................. 28 APPENDIX A: PHOTOGRAPHS OF TEST SETUP ...................................…

Text truncated - open the document above for the full version.

Report No.: AGC05794221201AP01 Page 1 of 4 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 30MHz RADIATED EMISSION TEST SETUP BELOW 1GHz Report No.: AGC05794221201AP01 Page 2 of 4 AC POWER LINE CONDUCTED TEST SETUP RF HEALTH ASSESSMENT TEST PHOTOS H-Field & E-Field Strength_ Position A Report No.: AGC05794221201AP01 Page 3 of 4 H-Field & E-Field Strength_ Position B H-Field & E-Field Strength_ Position C Report No.: AGC05794221201AP01 Page 4 of 4 H-Field & E-Field Strength_ Position D H-Field & E-Field Strength_ Position E ****************************************End of Report*************************************