2ANPB-RBT12100LFPSMART LITHIUM IRON PHOSPHATE BATTERY

VERSION A0 Smart Lithium Iron Phosphate Battery RENOGY Pro Series 12.8V 100Ah RBT12100LFP-BT USER MANUAL Before Getting Started The user manual provides important operation and maintenance instructions for Renogy Pro Series 12.8V 100Ah Smart Lithium Iron Phosphate Battery (hereinafter referred to as battery). Read the user manual carefully before operation and save it for future reference. Failure to observe the instructions or precautions in the user manual can result in electrical shock, serious injury, or death, or can damage the battery, potentially rendering it inoperable. z Renogy ensures the accuracy, sufficiency, and the applicability of information in the user manual at the time of printing due to continual product improvements that may occur. z Renogy assumes no responsibility or liability for personal and property losses, whether directly and indirectly, caused by the user’s failure to install and use the product in compliance with the user manual. z Renogy is not responsible or liable for any failure, damage, or injury resulting from repair attempts by unqualified personnel, improper installation, or inappropriate operation. z The illustrations in the user manual are for demonstration purposes only. Details may appear slightly different depending on product revision and market region. z Renogy reserves the right to change the information in the user manual without notice. For the latest user manual, visit renogy.com. Disclaimer Renogy Pro Series 12.8V 100Ah Smart Lithium Iron Phosphate Battery User Manual © 2023 Renogy. All rights reserved. RENOGY and are registered trademarks of Renogy. z All information in the user manual is subject to copyright and other intellectual property rights of Renogy and its licensors. The user manual may not be modified, reproduced, or copied, in whole or in part, without the prior written permissions of Renogy and its licensors. z The registered trademarks in the user manual are the property of Renogy. The unauthorized use of the trademarks is strictly prohibited. Online Manual User Manual Symbols Used ....................................................................................................................................1 Introduction ......................................................................................................................................1 Key Features ......................................................................................................................................1 SKU .....................................................................................................................................................1 What’s In the Box?.............................................................................................................................2 Required Tools & Accessories .........................................................................................................2 Get to Know Smart Lithium Iron Phosphate Battery ....................................................................3 Dimensions ........................................................................................................................................4 How to Size Battery Adapter Cables?.............................................................................................4 Secure the Battery (Optional) .........................................................................................................5 Step 1. Plan a Mounting Site ............................................................................................................6 Step 2. Wear Insulating Gloves ........................................................................................................6 Step 3. Check the Battery ...............................................................................................................6 Step 4. Install Battery Terminals ....................................................................................................7 Step 5. Connect the Battery to Other Devices ..............................................................................7 How to Connect Renogy Pro Batteries in Parallel? .......................................................................8 Calculate Voltage and Current in Parallel Connections .......................................................................8 Balance Batteries Prior to Connection ....................................................................................................9 Parallel Connection — Installation Steps ...............................................................................................10 Battery Cell Balancing ...............................................................................................................................10 Remote, 24/7 Monitoring via DC Home App ..................................................................................11 Charging/Discharging Parameter Settings .................................................................................11 Battery Charging and Discharging Logic.....................................................................................12 Charging Logic .............................................................................................................................................12 Discharging Logic .......................................................................................................................................12 How to Estimate the Battery SOC? ...............................................................................................13 Self-Heating Function ...................................................................................................................13 Battery Management System .......................................................................................................13 Troubleshooting...................................................…

Text truncated - open the document above for the full version.

RNGInternationalInc. FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 9/5/23 U.S.AgentDesignation [RNGInternationalInc.]acknowledgestheirconsentforthefollowingcontactlocatedintheUnitedStatestoact astheiragentforserviceofprocessfortheequipmentforwhichauthorizationissought(FCCID:[2ANPB- RBT12100LFP]): NameandcompanyofU.S.agent:RNGInternationalInc. PhysicalU.S.addressofagent:5050SArchibaldAve,Ontario,CA,91762,UnitedStates FRNofU.S.agent:0026824391 EmailaddressofU.S.agent:[email protected] [RNGInternationalInc.]acknowledgestheirobligationtoacceptserviceofprocessonbehalfof[RNG InternationalInc.]. [RNGInternationalInc.]withtheFRN[0026824391]acceptsitsobligationtomaintainanagentforserviceof processintheUnitedStatesfornolessthanoneyearaftereitherthegranteehaspermanentlyterminatedall marketingandimportationoftheapplicableequipmentwithintheU.S.,ortheconclusionofanyCommission- relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheverislater. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirementslistedunder§ 2.911(d)(7). TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB 986446D01. Anexpirationdateforthisletterdoesnotexist.IncasetheU.S.agentchanges,thegranteeisobligatedtonotify theFCCwithin30daysviathegrantingTCB. Sincerely, Signature [MrJasonJiang] [Sr.ProductManager] [RNGInternationalInc.] 4 8 _ [ m o d e l ] U S _ A g e n t _ 2 . 9 1 1 ( d ) ( 7 ) - U , V 0 5 RNGInternationalInc. Sincerely, Signature [MrJasonJiang] [Sr.ProductManager] [RNGInternationalInc.]

RNGInternationalInc. TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB986446D01. FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 8/24/23 Towhomitmayconcern: We,[RNGInternationalInc.],herebycertifythattheequipmentforwhichauthorizationissought (FCCID:[2ANPB-RBT12100LFP])isnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuantto§2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,wearenotidentifiedontheCovered List(https://www.fcc.gov/supplychain/coveredlist)asanentityproducing“covered”equipment. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirements listedunder§2.911(b)and(d)(5)and(6). Sincerely, Signature [MrJasonJiang] [Sr.ProductManager] [RNGInternationalInc.] 6 2 _ [ m o d e l ] C o v e r e d E q u _ 2 . 9 1 1 ( d ) ( 5 ) ( i ) a n d ( i i ) - U , V 0 2

ProjectNo.:18220WC301288Page1of3 Code:AB-RF-05-b AppendixII--ExternalPhotograph ProjectNo.:18220WC301288Page2of3 Code:AB-RF-05-b ProjectNo.:18220WC301288Page3of3 Code:AB-RF-05-b

LabelLocationOnEUT Label

ProjectNo.:18220WC301288Page1of4 Code:AB-RF-05-b AppendixIII--InternalPhotograph ProjectNo.:18220WC301288Page2of4 Code:AB-RF-05-b ANT ProjectNo.:18220WC301288Page3of4 Code:AB-RF-05-b ProjectNo.:18220WC301288Page4of4 Code:AB-RF-05-b

RFEXPOSUREEVALUATION AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b) FCCID:2ANPB-RBT12100LFP EUTSpecification EUTSMARTLITHIUMIRONPHOSPHATEBATTERY Frequencyband (Operating) WLAN:2.412GHz~2.462GHz WLAN:5.18GHz~5.32GHz/5.50GHz~5.70GHz WLAN:5.745GHz~5825GHz Others:BLE:2402-2480MHz DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others___ ExposureclassificationOccupational/Controlledexposure GeneralPopulation/Uncontrolledexposure AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity Max.outputpower-0.99dBm(0.0008W) Antennagain(Max)-5.08dBi EvaluationappliedMPEEvaluation SAREvaluation LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m ) Magnetic Field Strength(A/m ) Power Density(mW/cm 2 ) Average Time (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/150030 1500-100000----130 Friistransmissionformula:Pd=(Pout*G)\(4*pi*R2) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainMw G=gainofantennainlinearscale Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE.Ifweknowthemaximumgainoftheantennaandtotal powerinputtotheantenna,throughthecalculation,wewillknowthedistance wheretheMPElimitisreached. MeasurementResult Operating Mode Channel Frequency (MHz) Maximum output power (dBm) Tuneup tolerance (dBm) Max.Tuneup Power (dBm) Antenna Gain (dBi) Power densityat 20cm (mW/cm 2 ) Power density Limits (mW/cm 2 ) GFSK 2402-1.03-1.03±1-0.03-5.080.00011 2440-1.41-1.41±1-0.41-5.080.00011 2480-2.60-2.60±1-1.60-5.080.00001 2402-0.99-0.99±10.01-5.080.00011 2440-1.40-1.40±1-0.40-5.080.00011 2480-2.58-2.58±1-1.58-5.080.00001 Result:NoStandaloneSARtestisrequired.

Page1of33 AppendixTestData ReportNo.:18220WC30128801TestSampleNo.:1-2-2 StartTestDate:2023.06.27FinishTestDate:2023.07.03 TestEngineer:Auditor: Temperature:25.1 °C RelativeHumidity:49% Pressure:1012hPa AppendixA:DTSBandwidth TestResult TestModeAntennaFrequency[MHz] DTSBW [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt1 24020.6522401.6962402.3480.5PASS 24400.6602439.6722440.3320.5PASS 24800.6762479.6722480.3480.5PASS BLE_2MAnt1 24020.8882401.4682402.3560.5PASS 24401.0122439.5762440.5880.5PASS 24800.9442479.4722480.4160.5PASS Page2of33 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page3of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page4of33 BLE_2M_Ant1_2480 Page5of33 AppendixB:OccupiedChannelBandwidth TestResult TestModeAntennaFrequency[MHz] OCB[MHz] FL[MHz]FH[MHz] BLE_1MAnt1 24021.05062401.49312402.5437 24401.04392439.50462440.5485 24801.06722479.49642480.5636 BLE_2MAnt1 24022.07292401.00752403.0804 24402.05902439.02112441.0801 24802.09372478.99132481.0850 Page6of33 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page7of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page8of33 BLE_2M_Ant1_2480 Page9of33 AppendixC:Maximumconductedoutputpower TestResultPeak TestModeAntennaFrequency[MHz] ConductedPeak Power[dBm] Conducted Limit[dBm] Verdict BLE_1MAnt1 2402-1.03≤30PASS 2440-1.41≤30PASS 2480-2.60≤30PASS BLE_2MAnt1 2402-0.99≤30PASS 2440-1.40≤30PASS 2480-2.58≤30PASS Page10of33 TestGraphsPeak BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page11of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page12of33 BLE_2M_Ant1_2480 Page13of33 AppendixD:Maximumpowerspectraldensity TestResult TestModeAntennaFrequency[MHz]Result[dBm/3kHz]Limit[dBm/3kHz]Verdict BLE_1MAnt1 2402-16.22≤8.00PASS 2440-16.84≤8.00PASS 2480-17.86≤8.00PASS BLE_2MAnt1 2402-18.21≤8.00PASS 2440-18.45≤8.00PASS 2480-20.34≤8.00PASS Page14of33 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page15of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page16of33 BLE_2M_Ant1_2480 Page17of33 AppendixE:Bandedgemeasurements TestResult TestMod e Antenn a ChNam e Frequency[MHz ] RefLevel[dBm ] Result[dBm ] Limit[dBm ] Verdic t BLE_1MAnt1 Low2402-1.20-57.29≤-21.2PASS High2480-2.83-57.49≤-22.83PASS BLE_2MAnt1 Low2402-1.22-32.63≤-21.22PASS High2480-3.79-57.04≤-23.79PASS Page18of33 TestGraphs BLE_1M_Ant1_Low_2402 BLE_1M_Ant1_High_2480 BLE_2M_Ant1_Low_2402 Page19of33 BLE_2M_Ant1_High_2480 Page20of33 AppendixF:ConductedSpuriousEmission TestResult TestMod e Antenn a Frequency[MHz ] FreqRange [MHz] RefLeve l [dBm] Result[dBm ] Limit[dBm ] Verdic t BLE_1MAnt1 2402 Reference-1.18-1.18---PASS 30~1000-1.18-69.35≤-21.18PASS 1000~2650 0 -1.18-46.33≤-21.18PASS 2440 Reference-1.61-1.61---PASS 30~1000-1.61-68.86≤-21.61PASS 1000~2650 0 -1.61-44.53≤-21.61PASS 2480 Reference-2.90-2.90---PASS 30~1000-2.90-69.16≤-22.9PASS 1000~2650 0 -2.90-43≤-22.9PASS BLE_2MAnt1 2402 Reference-1.25-1.25---PASS 30~1000-1.25-68.98≤-21.25PASS 1000~2650 0 -1.25-46.53≤-21.25PASS 2440 Reference-1.66-1.66---PASS 30~1000-1.66-69.47≤-21.66PASS 1000~2650 0 -1.66-46.41≤-21.66PASS 2480 Reference-2.88-2.88---PASS 30~1000-2.88-69.41≤-22.88PASS 1000~2650 0 -2.88-43.72≤-22.88PASS Page21of33 TestGraphs BLE_1M_Ant1_2402_0~Reference BLE_1M_Ant1_2402_30~1000 BLE_1M_Ant1_2402_1000~26500 Page22of33 BLE_1M_Ant1_2440_0~Reference BLE_1M_Ant1_2440_30~1000 Page23of33 BLE_1M_Ant1_2440_1000~26500 BLE_1M_Ant1_2480_0~Reference Page24of33 BLE_1M_Ant1_2480_30~1000 BLE_1M_Ant1_2480_1000~26500 Page25of33 BLE_2M_Ant1_2402_0~Reference BLE_2M_Ant1_2402_30~1000 Page26of33 BLE_2M_Ant1_2402_1000~26500 BLE_2M_Ant1_2440_0~Reference Page27of33 BLE_2M_Ant1_2440_30~1000 BLE_2M_Ant1_2440_1000~26500 Page28of33 BLE_2M_Ant1_2480_0~Reference BLE_2M_Ant1_2480_30~1000 Page29of33 BLE_2M_Ant1_2480_1000~26500 Page30of33 AppendixG:DutyCycle TestResult TestModeAntennaFrequency[MHz] ONTime [ms] Period [ms] DutyCycle [%] DutyCycle Factor[dB] BLE_1MAnt1 24020.420.6366.671.76 24400.420.6366.671.76 24800.420.6366.671.76 BLE_2MAnt1 24020.230.6336.514.38 24400.230.6336.514.38 24800.240.6338.104.19 Page31of33 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page32of33 BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page33of33 BLE_2M_Ant1_2480 ---End---

ReportNo.:18220WC30128801FCCID:2ANPB-RBT12100LFPPage1of28 Code:AB-RF-05-b FCCTestReport Applicant:RNGInternationalInc. Address: 5050SArchibaldAve,Ontario,CA,91762, UnitedStates ProductName:SMARTLITHIUMIRONPHOSPHATEBATTERY ReportDate:Aug.24,2023 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC30128801FCCID:2ANPB-RBT12100LFPPage2of28 Code:AB-RF-05-b Contents 1.GeneralInformation............................................................................................................................................6 1.1.ClientInformation....................................................................................................................................6 1.2.DescriptionofDevice(EUT)..................................................................................................................6 1.3.AuxiliaryEquipmentUsedDuringTest................................................................................................7 1.4.DescriptionofTestConfiguration..........................................................................................................7 1.5.DescriptionOfTestSetup......................................................................................................................8 1.6.TestEquipmentList.................................................................................................................................9 1.7.MeasurementUncertainty....................................................................................................................10 1.8.DescriptionofTestFacility...................................................................................................................10 2.SummaryofTestResults................................................................................................................................11 3.ConductedEmissionTest................................................................................................................................12 3.1.TestStandardandLimit.......................................................................................................................12 3.2.TestSetup...............................................................................................................................................12 3.3.TestProcedure.......................................................................................................................................12 3.4.TestData.................................................................................................................................................12 4.RadiationSpuriousEmissionandBandEdge.............................................................................................13 4.1.TestStandardandLimit.......................................................................................................................13 4.2.TestSetup...............................................................................................................................................13 4.3.TestProcedure.......................................................................................................................................14 4.4.TestData.................................................................................................................................................15 5.MaximumPeakOutputPowerTest...............................................................................................................23 5.1.TestStandardandLimit.......................................................................................................................23 5.2.TestSetup...............................................................................................................................................23 5.3.TestProcedure.......................................................................................................................................23 5.4.TestData.................................................................................................................................................23 6.6DBOccupyBandwidthTest..........................................................................................................................24 6.1.TestStandardandLimit.......................................................................................................................24 6.2.TestSetup...............................................................................................................................................24 6.3.TestProcedure.......................................................................................................................................24 6.4.TestData.................................................................................................................................................24 7.PowerSpectralDensityTest...........................................................................................................................25 7.1.TestStandardandLimit.......................................................................................................................25 7.2.TestSetup...............................................................................................................................................25 7.3.TestProcedure.......................................................................................................................................25 7.4.TestData.................................................................................................................................................25 8.100kHzBandwidthofFrequencyBandEdgeRequirement......................................................................26 8.1.TestStandardandLimit.......................................................................................................................26 8.2.TestSetup.......................................…

Text truncated - open the document above for the full version.

version01 RNGInternationalInc. DeclarationconcerningAntennaSpecification Itisherebydeclaredthattheproduct ModelNo.:RBT12100LFP-BT FCCID:2ANPB-RBT12100LFP fulfillstherequirementinFCCtestrelatingtotheantennatype. ThedevicespecifiedaboveconfirmstotheFCCrecommendationsfor internal antennatype(s) describedbelow: ModelNo.ofantenna:V1.0 Typeofantenna:Ceramicantenna Gainoftheantenna:-5.08dBi Frequencyrange:2400-2500MHz Themountingoftheantennaisfixedtotheradiomoduleandnootherantennashouldbeused. Companyname: RNGInternationalInc. Address: 5050SArchibaldAve,Ontario,CA,91762,UnitedStates City:CA ZIP/Postalcode:/ Country:UnitedStates Place:CADate:8/24/2023 Signature:

深圳市麦捷微电子科技股份有限公司 地址：深圳市坪山区龙田街道竹坑社区坪山科技路麦捷科技智慧园 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518118 1 CUSTOMER: 日期 DATE: 纳入仕样书 SPECIFICATION 贵 司 料 号YOUR PART N 产 品 名 称PRODUCT NAME: 天线 Ceramic antenna O.: 敝 司 料 号OUR PART NO.: MGMA3216H2450-A02 版本号VERSION NO.: V1.0 本纳入仕样书共13页 MANUFACTURING NAME 深圳市麦捷微电子科技股份有限公司 SHENZHEN MICROGATE TECHNOLOGY CO.，LTD TEL：86-755-28085000 FAX：86-755-28085605 接受RECEPTION THE SPECIFICATION HAS BEEN ACCEPTED. 该纳入仕样书已被我司接受 日期: DATE： 公司： COMPANY： 批准 CFMD 审核 CHKD 接收 RCVD CFMD. 批准 CHKD. 审核 DSGD. 担当 梁启新 赖定权 曾艳锋 深圳市麦捷微电子科技股份有限公司 地址：深圳市坪山区龙田街道竹坑社区坪山科技路麦捷科技智慧园 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518118 2 纳入仕样书改定履历MODIFY HISTORY OF SPECIFICATION NO. DATE CONTENT REV APPROVED 1 2006-10-25 初稿Constitute 1.0 张海恩 深圳市麦捷微电子科技股份有限公司 地址：深圳市坪山区龙田街道竹坑社区坪山科技路麦捷科技智慧园 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518118 3 目录CATALOG 1 适用范围 Scope．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 4 2 品名构成 Product Identification．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 4 3 形状、尺寸Appearance and Dimensions．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 4 4 测试电路及测试条件 Testing Conditions．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 4 5 电气性能 Electrical Characteristics．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 5 6 特性曲线 Characteristic curve．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．6 7 信赖性试验 Reliable Performance．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 7 8 焊接条件 Recommended Soldering Conditions．．．．．．．．．．．．．．．．．．．．．．．．．．．．．9 9 包装 Packaging．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．10 10 装箱清单及标志 Packing documents and marking．．．．．．．．．．．．．．．．．．．．．．． 11 11 保管 Storage．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． 13 深圳市麦捷微电子科技股份有限公司 地址：深圳市坪山区龙田街道竹坑社区坪山科技路麦捷科技智慧园 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518118 4 1 适用范围Scope Bluetooth、Module、etc，small size SMD chip design. 2 品名构成Product 系列产品，设计用于WLAN、HomeRF、Bluetooth、Module等，小体积SMD片式设计 。 c e r a m i c a n t e n n a series are designed to be used in WLAN、HomeRF、 Identification MGMA 3216 H 2450 -A02 3 形状、尺寸Appearance and Dimensions 4 测试电路及测试条件 Test Circuit and Testing Conditions Unit：mm 中心频率/ Center Frequency: 2450MHz 结构：过孔设计 产品尺寸：3.2×1.6×1.2 S型 天线/Ceramic antenna 标准规格，编号:A02/Normaling Type: A02 深圳市麦捷微电子科技股份有限公司 地址：深圳市坪山区龙田街道竹坑社区坪山科技路麦捷科技智慧园 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518118 5 除非另有规定，否则在以下条件下测试 <Unless otherwise specified> 温度Temperature : Ordinary Temperature (5 to 35°C) 湿度Humidity : Ordinary Humidity (25 to 85% RH) 大气压强Atmospheric Pressure : 86 to 106 kPa 当对测量结果有疑问时<In case of doubt> 温度Temperature : 20±2°C 湿度Humidity : 55 to 75% RH 大气压强Atmospheric Pressure : 86 to 106 kPa 5 电气性能Electrical Characteristics 操作温度范围Operating Temperature Range : -40 to +85°C 保存温度范围 Storage Temperature Range : -40 to +85°C No. Item （项目） Specifications （特性） 1 2400-2 Frequency 频率 (No matching) 500MHz (带匹配电路测试)After Matching 2450 MHz 2 Band Width 通带宽度(No matching) 200 MHz ( 3400～3600MHz ) (带匹配电路测试)After Matching 100 MHz ( 2400～2500MHz ) 3 Gain 增益 -5.08 dBi 4 V.S.W.R (in BW) 驻波比 ≤2.0 5 Polarization 极化方式 Linear 线性 6 Azimuth Beam width 方位角 Omni-directional 全向 7 Impedance 阻抗 50 Ω FreqEffiGain (MHz)(%)(dBi) 2400 22%-6.507324 2410 24%-6.180729 2420 25%-6.021038 2430 26%-5.822719 2440 27%-5.744008 2450 28%-5.563936 2460 28%-5.535502 2470 29%-5.325254 2480 30%-5.227285 2490 31%-5.088349 2500 31%-5.084538 2400MHz 2450MHz 2500MHz 深圳市麦捷微电子科技股份有限公司 地址：深圳市坪山区龙田街道竹坑社区坪山科技路麦捷科技智慧园 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518118 6 6 特性曲线Characteristic curve 1）Before Matching 2) After Matching 深圳市麦捷微电子科技股份有限公司 地址：深圳市坪山区龙田街道竹坑社区坪山科技路麦捷科技智慧园 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518118 7 7 信赖性试验Reliable Performance NO. Item Specifications Test Methods 7-1 Solder- Ability 可焊性 More than 90% of termination should be covered with new solder. 端电极焊锡覆盖率为 90%以上。 焊锡Solder: Sn: Pb= 100:0 焊锡温度Temperature: 255°C+5°C/-0°C 助焊剂 Flux: 松香rosin 浸渍时间Duration: 5±0.5s 7-2 Leaching Resistance 耐焊性 More than 75% of termination Should be covered with new solder. 端电极焊锡覆盖率为 75%以上 焊锡Solder: Sn: Pb= 100:0 焊锡温度Temperature: 270°C+2°C/-0°C 助焊剂 Flux: 松香rosin 浸渍时间Duration: 10±0.5s 7-3 Terminal Strength 端头强度 The terminal and body should be no damage 端头和瓷体不应见损伤 The device should not be broken after tensile force of 1.0kg is slowly applied to pull a lead pin of the fixed device in the lead axis direction for 10±1 seconds. 在产品电极端子上或表面上应能承受1kg垂直拉力10±1秒 7-4 Bending Strength 弯曲试验 No mechanical damage should be noticed 不应见机械损伤 Weld the product to the center part of the PCB with the thickness 1.6±0.2mm as the illustration shows, and keep exerting force arrow-ward on it at speed of: 1mm/S, and hold for 5±1S at the position of 1.5mm bending distance, so far, any peeling off of the product metal coating should not be detected. 将产品按图焊在1.6±0.2mm的 PCB 板中间，由箭头方向施力 1mm/S，弯曲距离1.5mm，保 持5±1S，产品金属层无脱落。 深圳市麦捷微电子科技股份有限公司 地址：深圳市坪山区龙田街道竹坑社区坪山科技路麦捷科技智慧园 电话(Tel)：0755-28085000 传真(Fax)：0755-28085605 邮编(Postcode)：518118 8 NO. Item Specifications Test Methods 7-5 Drop 跌落 Post Environmental Tolerance (环境试验后允许附加误差) 1 Center Frequency中心频率： ±25 MHz； 2 Band Width 通带宽度： ±20 MHz； 3 Gain 增益： ±0.2 dBi 4 V.S.W.R (in BW) 驻波比： ±0.5 dB； Drop 10 times on a concrete floor from a height of 1m. 从距混凝土地面1m高度自由落下，重复3次。 7-6 Vibration 振动 频率Frequency: 10 to 55Hz 振幅Amplitude: 1.5mm 方向及时间Direction and time: X, Y and Z directions for 2 hours each. 7-7 Humidity resistance 耐潮湿 a. 试验条件Test condition 温度Temp.: 60±2°C 湿度Humidity: 90%~95% 试验时间Test time: 96±2 h b. 测量条件Measurement method: 试验后常温常湿环境中放置（24±2）小时后测量。 The component should be stabilized at normal condition for (24±2) hours before test. 7-8 High temperature resistance 耐高温 a. 试验条件Test condition 温度Temp.: + 85±2°C 试验时间Test time: 96±2 h b. 测量条件Measurement method: 试验后常温常湿环境中放置（24±2）小时后测量。 The component should be stabilized at normal condition for (24±2) hours before test. 7-9 Low temperature resistance 耐低温 a. 试验条件Test condition 温度Temp.: -40±2°C 试验时间Test time: 96±2 h b. 测量条件Measurement method: 试验后常温常湿环境中放置（24±2）小时后测量。 The component shou…

Text truncated - open the document above for the full version.

ProjectNo.:18220WC301288Page1of1 Code:AB-RF-05-b AppendixI--TestSetupPhotograph PhotoofRadiationEmissionTest