2ANTC-C528MWireless IP Camera

Wireless IP Camera C528M Quick Start Guide For more information, please visit https:// www.zositech.com Support Email: [email protected] 1English What’s in the Box Camera Power Adapter Mounting Screw Bag Quick Start Guide Quick Start Guide Mounting Template FRONT Mounting Plate NOTE: The number of accessories varies with the camera model you purchased. English2 Camera Structure Diagram Lens Microphone Monitor Speaker Type-C USB( Charging Port) Micro SD Card Slot Press-to-Call Button Reset Button (visible with downward- facing lens) Lens 3English Features Live Feed Watch the camera's live video in real-time through Zosi Smart App. Adjust the camera's image quality, control its pan/tilt function to change the viewing angle, capture screenshots and record monitoring footage, and make a two-way communication. Dual View on One Screen It’s like two cameras in one. Equipped with dual lens, it can offer a broader surveillance perspective and a dual view experience. Two-Way Video Calling The camera facilitates video call via press on the button or hand gesture. It seamlessly connects with the mobile App, and incoming call notifications are instantly delivered to your phone, allowing for two-way video communication, ensuring instant conversations with your family. Infrared Night Vision The camera can automatically switch to night vision mode based on changes in the surrounding lighting conditions. It is equipped with built-in infrared lights that ensure clear visibility even in dark environments. Video Playback There are two recording storage options: Micro SD card and cloud storage. You can either install a Micro SD card or subscribe to a cloud storage plan to playback recorded footage. English4 Installing a Micro SD Card Make sure the camera is powered off. Lift the camera head downward to access the SD card slot. Insert the Micro SD card with the contact side facing upward. NOTE: When installing or removing the Micro SD card, make sure to power off the camera before proceeding to prevent damage to the Micro SD card. Please use Micro SD cards produced by reputable manufacturers. The device only supports the Fat32 format, so make sure the format of the MicroSD card installed is Fat32 before installation and use. It is recommended to use a Micro SD card with a minimum read/write speed of U1/Class 10. Smart Detection Detect motion or human presence and promptly send alarm notifications to the app, allowing you to check out at any time. Human Tracking With built-in AI person detection algorithm, the camera automatically tracks and follows human objects within the monitoring area, keeping the subject in focus wherever they go. Device Startup Connect the power cord to the Type-C charging port on the back of the camera, and the camera will automatically turn on. NOTE: The camera will rotate automatically during the boot process. Do not manually adjust the camera forcefully. Self-checking will take approximately half a minute. 5English Micro SD Card Slot Indicator light: Slow flashing indicates the device is not connected. Fast flashing indicates the device is in a call. Steady light indicates the device is connected. English6 App Installation 1. Scan the QR code below to download free Zosi Smart App on your phone. (Both Android and Apple systems can scan to download, and also can search and download in App Store or Google Store.) Zosi SmartAndroid/IOSApp Operation Video Add Device 1. Open Zosi Smart App and follow the prompts to register and log in. 2. Tap "+" to add a device. Follow the in-app instructions to complete the network settings and addition of the device. 7English Ceiling/Wall-mounted Notes 1. Drill holes in the wall according the mounting hole template and insert the plastic wall plugs. 2. Insert the setscrews and fix the bracket. 3. Install the camera on the bracket and tighten it after adjusting the camera angle. Installation Notes 1. Please confirm that the device has been added to the App before installation. 2. The camera can be installed flat, ceiling or wall mounted, it is recommended to place it in a place with a wide viewing angle. 02 Add device QR code on device Scan QR code on device 01 Sign up Language Log inLog in New users should register first and then log in. Sign up ZosiSmart ZosiSmart Precautions for Installation and Use 1. Please use the power adapter that comes with this product to power the device. (Using the different power adapter or the power adapter not in accordance with the instructions may cause damage to the device.) 2. This product cannot be installed outdoors. (Including but not limited to corridors, eaves, and covered courtyards.) 3. Indoors installation needs to be kept away from humid or high temperature environment. 4. Avoid direct sunlight for a long time when using this product. 5. Install and use this product in compliance with national and regional electrical safety regulations. 6. In order to improve the user experience, the APP will be updated and upgraded from time to time, the specific operations will slightly different, please follow the APP guidelines. English8 9English 1. Drill holes according to the mounting template, and insert the anchors into the holes. 2. Tighten the screws to secure the mounting plate in place. 3. To secure the camera, align the camera with the mounting plate, and turn the camera clockwise to lock into place. NOTE: To remove the camera from the plate, just turn the camera counterclockwise. Diagram of Wall-mounted/Ceiling Installation ① ② ③ English10 AVSS Download and install Zosi AVSS Client, and following this guide to complete installation. Official download link: https://www.zositech.com/app/, double-click “AVSS” icon, choose language and click log in. Note: It is recommended to log in with the account of Zosi Smart App to avoid multiple accounts using. Local login (No account and password required) Please scan the QR code below to watch the AVSS operation video. FAQ Q: Why is the device offline? A: Please check whe…

Text truncated - open the document above for the full version.

Section 2-911(dX7) USAAgent for Service of Process Company name:Ansjer Electronics Co., Ltd Address:301,1st Building,No.2l Yongtian Road, Xangzhou, Zhuhai, Guangdong, China FCC lD:2ANTC-C528M 2.911(d)t7) USA Designated Agent for Seruice of Process We, [Ansjer Electronics Co., Ltd] ("the applicant") designate [Loocam Technology LLC] NorEl for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later, Agent obligation; WeAcknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U-S., orthe conclusion of any Commissiorr-related adrninistrative or judicial proceeding involving the equipment, whichever is later. Applicant Company name" Ansjer Electronics Co., Ltd Address: 301 ,1st Building,No.2l Yongtian Road, Xiangzhou , Zhuhai, Guangdong, China FRN: 0032926754 Contact Name: Lanner Lan Telephone No: 0756-6259750 Email : tech@ansjer" com lnnne'( NOTE 1: An appticant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on O2lffil23 https://www.federalregister.qov/documents/2023/02/06/2022-28263/protecting-against-nation al-secu rity-threats-to-the-communication s-su pplv-chai n-th rouqh-the 2.911 (dX7)USA Agent v1"2

Ansjer Electronics Co., Ltd 301,1st Building,No.2l Yongtian Road, Xiangzhou, Zhuhai, Guangdong, China Federal Communications Commission Authorization and Evaluation Division 7435 0akland Mills Road Columbia, MD 21046 USA Date; Aug. 23,2024 Ref: Attestation Statements Part 2.911(d)(5Xi) Filing FCC lD; 2ANTC-CS28M FRN: 0032926750 [Ansjer Electronics Co., Ltd] {"the applicant") certifies that the equipment for which authorization is sought is not "covered" equipment prohibited from receiving an equipment authorization pu!'suant to section 2.903 of the FCC rules" Sincerely, (Applicant signature) (Lanner Lan) LannaY Lart

Ansjer Electronics Co., Ltd 301,1st Building,No.2l Yongtian Road, Xiangzhou, Zhuhai, Guangdong, China Federal Corn munications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Colurnbia, MD 21046 USA Date: Aug. 23,2024 Ref; Attestation Statements Part 2.911(d)(5Xii] Filing FCC lD: 2ANTC-C528M FRN: 0032926750 [Ansjer Electronics Co., Ltd] ("the applicant") centifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing "covered" equipment. Sincerely, {Applicant signature} (Lanner Lan) Lann(\ Lafi

Ansjer Electronics Co., Ltd Product Similarity Declaration Product name: Wireless IP Camera Model name: C528M, C520M, C528 FCC ID: 2ANTC-C528M We (Ansjer Electronics Co., Ltd) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design, the only difference is the model name. Signature: Name: Lanner Lan Title: Manager Place, date: China / Aug. 23, 2024

C5266091_X8_Ed.1 1/1 Letter of Authorization < Ansjer Electronics Co., Ltd > Company: Ansjer Electronics Co., Ltd Address: 301,1st Building,No.21 Yongtian Road, Xiangzhou, Zhuhai, Guangdong, China Product Name: Wireless IP Camera Model Number: C528M, C520M, C528 FCC Identifier: 2ANTC-C528M We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Lanner Lan Date: Aug. 23, 2024 Title: Manager Signature of applicant:

Ansjer Electronics Co., Ltd 301,1st Building,No.21 Yongtian Road, Xiangzhou, Zhuhai, Guangdong, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Aug. 23, 2024 Subject; Request for Confidentiality FCC ID: 2ANTC-C528M To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Lanner Lan Title: Manager

C5266091_X13_Ed.1 1/1 Ansjer Electronics Co., Ltd FCC Software Configuration Control Declaration Date: Aug. 23, 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product/ Model Number: C528M, C520M, C528 Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Signature of applicant Name: Lanner Lan Title: Manager

Report No.: AGC06662231210AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC06662231210AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC06662231210AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC06662231210AP02 Page 4 of 4 RIGHT VIEW OF EUT PORT OF EUT ****************************************End of Report*************************************

FCC ID Label Location 20mm*10mm FCC ID: 2ANTC-C528M

Report No.: AGC06662231210AP02 Page 1 of 9 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC06662231210AP02 Page 2 of 9 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC06662231210AP02 Page 3 of 9 INTERNAL VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 4) Report No.: AGC06662231210AP02 Page 4 of 9 INTERNAL VIEW OF EUT (FIGURE 5) ANTENNA-1 2.4G WIFI& 5GWIFI Antenna Report No.: AGC06662231210AP02 Page 5 of 9 ANTENNA-2 INTERNAL VIEW OF EUT (FIGURE 6) Report No.: AGC06662231210AP02 Page 6 of 9 INTERNAL VIEW OF EUT (FIGURE 7) INTERNAL VIEW OF EUT (FIGURE 8) Report No.: AGC06662231210AP02 Page 7 of 9 INTERNAL VIEW OF EUT (FIGURE 9) INTERNAL VIEW OF EUT (FIGURE 10) Report No.: AGC06662231210AP02 Page 8 of 9 INTERNAL VIEW OF EUT (FIGURE 11) INTERNAL VIEW OF EUT (FIGURE 12) Report No.: AGC06662231210AP02 Page 9 of 9 INTERNAL VIEW OF EUT (FIGURE 13) INTERNAL VIEW OF EUT (FIGURE 14) ****************************************End of Report*************************************

Page 1 of 9 RF Exposure Report Report No.: AGC06662231210FH01 FCC ID : 2ANTC-C528M APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless IP Camera BRAND NAME : N/A MODEL NAME : C528M, C520M, C528 APPLICANT : Ansjer Electronics Co., Ltd DATE OF ISSUE : Aug. 22, 2024 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC06662231210FH01 Page 2 of 9 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Aug. 22, 2024 Valid Initial Release Report No.: AGC06662231210FH01 Page 3 of 9 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 5. Mobile Device Evaluation Method and Limit ................................................................................................ 8 6. Measurement Results ..................................................................................................................................... 9 7. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC06662231210FH01 Page 4 of 9 1. General Information Applicant Ansjer Electronics Co., Ltd Address 301,1st Building,No.21 Yongtian Road, Xiangzhou, Zhuhai, Guangdong, China Manufacturer Zhuhai Ansjer Electronics Co., Ltd. Zhongshan Branch Address Building C( 2nd to 5th Floor), BuildingB(Section A, 2nd Floor; 4rd to 5th Floors), No. 5 Wanli Road, Sanxiang Town,Zhongshan,Guangdong, China Factory Zhuhai Ansjer Electronics Co., Ltd. Zhongshan Branch Address Building C( 2nd to 5th Floor), BuildingB(Section A, 2nd Floor; 4rd to 5th Floors), No. 5 Wanli Road, Sanxiang Town,Zhongshan,Guangdong, China Product Designation Wireless IP Camera Brand Name N/A Test Model C528M Series Model(s) C520M, C528 Difference Description All the series models are the same as the test model except for the model names. Date of receipt of test item Jan. 18, 2024 Date of Test Jan. 18, 2024~Aug. 22, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Cici Li (Project Engineer) Aug. 22, 2024 Reviewed By Calvin Liu (Reviewer) Aug. 22, 2024 Approved By Max Zhang Authorized Officer Aug. 22, 2024 Report No.: AGC06662231210FH01 Page 5 of 9 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version IT523-C39-528M3 Software Version V4.3.8.52V301652AA Modulation Type 2.4G WLAN: 802.11b:(DQPSK, DBPSK, CCK) DSSS 802.11g/n:(64-QAM,16-QAM, QPSK, BPSK) OFDM 5G WLAN: 802.11a/n:(64-QAM, 16-QAM, QPSK, BPSK) OFDM Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation Dipole antenna Antenna Gain 2.4GWIFI: 2.71dBi 5GWIFI: 3.50dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC06662231210FH01 Page 6 of 9 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC…

Text truncated - open the document above for the full version.

WIFI Antenna Test Report 2011.12.06 August 9, 2024 Manufacturer information Shenzhen Feixun Lianke Electronics Co., Ltd Project C528M dual band steel plate antenna Antenna typeDIPOLE antenna Product Description 304 nickel plating Product No GP1611B-BXG-A Antenna frequency band 2400MHz-2500MHz/5000MHz-5800MHz Shenzhen Feixun Lianke Electronics Co., Ltd Purpose This report is to measure the performance of antenna for All test date are showed as below. Content Antenna schematic diagram Antenna size diagram Smith Chart GAIN & Efficiency 2D & 3D Directional pattern 2 Shenzhen Feixun Lianke Electronics Co., Ltd 3 1. Product Overview 1.1 Antenna schematic diagram Shenzhen Feixun Lianke Electronics Co., Ltd 4 1. Product Overview 1.2 Antenna size diagram Shenzhen Feixun Lianke Electronics Co., Ltd 5 2. Test Result 2.1 WIFI dual band steel antenna VSWR Shenzhen Feixun Lianke Electronics Co., Ltd Frequen cy (MHz) 240024502500523057005800 VSWR1.331.551.942.591.712.67 6 2. Test Result 2.2 WIFI dual band steel antenna RETRUN LOSS Shenzhen Feixun Lianke Electronics Co., Ltd Frequen cy (MHz) 240024502500523057005800 RETRUN LOSS（DB） -16.83-13.33-9.88-7.02-11.56-6.81 7 2. Test Result 2.2 WIFI dual band steel antenna Shenzhen Feixun Lianke Electronics Co., Ltd Frequen cy (MHz) 240024502500523057005800 44.1032.9926.4099.0673.7525.02 8 2. Test Result 2.3 WIFI dual band steel antenna GAIN & Efficiency FreqEffiGain (MHz)(%)(dBi) 2400 40.071.40 2410 41.141.09 2420 41.551.71 2430 40.541.83 2440 47.451.85 2450 40.311.80 2460 41.262.42 2470 49.671.72 2480 49.81.85 2490 45.552.71 2500 43.570.56 FreqEffiGain (MHz)(%)(dBi) 5700 45.473.50 5710 48.231.16 5720 47.821.48 5730 43.461.44 5740 47.841.74 5750 43.431.38 5760 43.671.43 5770 44.261.39 5780 47.141.77 5790 441.2 5800 42.63.10 Shenzhen Feixun Lianke Electronics Co., Ltd 9 2. Test Result 2.4 WIFI dual band steel antenna 2D & 3D Directional pattern Shenzhen Feixun Lianke Electronics Co., Ltd 10 2. Test Result 2.4 WIFI dual band steel antenna 2D & 3D Directional pattern Shenzhen Feixun Lianke Electronics Co., Ltd

Page 1 of 104 FCC Test Report Report No.: AGC06662231210FR02 FCC ID : 2ANTC-C528M APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless IP Camera BRAND NAME : N/A MODEL NAME : C528M, C520M, C528 APPLICANT : Ansjer Electronics Co., Ltd DATE OF ISSUE : Aug. 22, 2024 STANDARD(S) : FCC Part 15 Subpart E §15.407 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC06662231210FR02 Page 2 of 104 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Aug. 22, 2024 Valid Initial Release Report No.: AGC06662231210FR02 Page 3 of 104 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Table of Carrier Frequency ........................................................................................................................ 7 2.3 IEEE 802.11n Modulation Scheme ........................................................................................................... 8 2.4 Related Submittal(S) / Grant (S) ............................................................................................................... 9 2.5 Test Methodology ...................................................................................................................................... 9 2.6 Special Accessories .................................................................................................................................. 9 2.7 Equipment Modifications ........................................................................................................................... 9 2.8 Antenna Requirement ............................................................................................................................... 9 2.9 Description of Test Software ................................................................................................................... 10 3. Test Environment .......................................................................................................................................... 11 3.1 Address of The Test Laboratory .............................................................................................................. 11 3.2 Test Facility .............................................................................................................................................. 11 3.3 Environmental Conditions ....................................................................................................................... 12 3.4 Measurement Uncertainty ....................................................................................................................... 12 3.5 List of Equipment Used ........................................................................................................................... 13 4.System Test Configuration ............................................................................................................................ 15 4.1 EUT Configuration ................................................................................................................................... 15 4.2 EUT Exercise ........................................................................................................................................... 15 4.3 Configuration of Tested System .............................................................................................................. 15 4.4 Equipment Used in Tested System ......................................................................................................... 15 4.5 Summary of Test Results ........................................................................................................................ 16 5. Description of Test Modes ........................................................................................................................... 17 6. Duty Cycle Measurement ............................................................................................................................. 20 7. RF Output Power Measurement .................................................................................................................. 23 7.1 Provisions Applicable .............................................................................................................................. 23 7.2 Measurement Procedure ......................................................................................................................... 23 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 23 7.4 Measurement Result ............................................................................................................................... 24 8. 6dB&26dB Bandwidth Measurement .......................................................................................................... 26 8.1 Provisions Applicable .............................................................................................................................. 26 8.2 Measurement Procedure ......................................................................................................................... 26 8.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 26 8.4 Measurement Results ............................................................................................................................. 27 Report No.: AGC066622312…

Text truncated - open the document above for the full version.

Report No.: AGC06662231210FR02 Page 67 of 104 Test_Graph_802.11a_ANT1_5320_6Mbps_Frequency Band 3 Test_Graph_802.11a_ANT1_5320_6Mbps_Frequency Band 4 Report No.: AGC06662231210FR02 Page 68 of 104 Test Graphs of Spurious Emissions outside of the 5.470-5.725 GHz band for transmitters operating in the 5.470-5.725 GHz band Test_Graph_802.11a_ANT1_5500_6Mbps_Frequency Band 1 Test_Graph_802.11a_ANT1_5500_6Mbps_Frequency Band 2 Report No.: AGC06662231210FR02 Page 69 of 104 Test_Graph_802.11a_ANT1_5500_6Mbps_Frequency Band 3 Test_Graph_802.11a_ANT1_5500_6Mbps_Frequency Band 4 Report No.: AGC06662231210FR02 Page 70 of 104 Test_Graph_802.11a_ANT1_5700_6Mbps_Frequency Band 1 Test_Graph_802.11a_ANT1_5700_6Mbps_…

Text truncated - open the document above for the full version.