2AO37-ATLASAIRProCom

Atlas Air DIGITAL WIRELESS INTERCOM Table of Contents I Contents I Caution Certificate Introduction Product Image Function Power Current Setting Display Volume Setting User Number Setting Channel Setting Pairing(Grouping) Noise Cancel Beep Sound Display Brightness MicVolume Level Device Version Info PA Mode(PTT button) MicMute Rotation Side Tone How to reset case of malfunction How to charge FAQ Specificationsand Caution ---------------------------------------------02 -------------------------------------------03 ----------------------------------04 -----------------------------------------05 -----------------------05 -------------------------------06 -------------------------06 -------------------------------07 -----------------------------08 ---------------------------------09 -----------------------------------09 ----------------------------10 ---------------------------10 -------------------------11 ----------------------11 -----------------------------------11 --------------------------------------12 -----------------------------------12 -----------13 ------------------------------13 -----------------------------------------------14 --------------------------15 -01- Caution -02- Atlas Air operates in the license-free 900MHz ISM band. Atlas Air subject to the Rules and Regulations of the FCC. This device complies with part 15 of the FCC rules. Operation is subject to th e following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interferenc e that may cause undesired operation. NOTE:THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFI CATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICA TIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. NOTE: This equipment has been tested and found to comply with the limits f or a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide re asonable protection against harmful interference in a residential installation.This equipment generates us es and can radiate radio frequency energy and, if not installed and used in ac cordance with the instructions, may cause harmful interference to radio com munications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to whi ch the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Caution * Do not put sharp, hard materials into the connector hole when using this product. * Do not put apart or repair Atlas Air yourself. * Do not leave Atlas Air in a vehicle in hot or cold weather. * Leaving Atlas Air in a closed area for a long period of time may result in deformation or malfunction of this product. * For charging use only the provided charger & cable. Using a third party charger may cause explosion, fire or malfunction. * Stop using Atlas Air immediately if you smell something like smoke from this. * Stop using Atlas Air immediately when exposed to risk of fire and call the customer center and consult if you can use Atlas Air at the environment. * Please do not use third party’s components. * If you use a third party component, it could cause breakdown or malfunction. * Be careful not to apply strong pressure on this product, which may cause breakdown or damage to the product. * If dirt slips in, the quality could decline, so make sure to clean the product with soft cloth often. * If Atlas Air submerges under water, don’t put apart or repair it yourself. Please turn the power off and call our customer service center. Certification: -03- Identification Code: Shown below Company Name: Manufacturer/Country: Date of manufacturing: Marked Separately Model Name: Shown Below Input Rating:Shown Below Date of Manufacture:Separately Shown Model NameInput Rating Identification Code Introduction -04- Product Image LEFT RIGHT PTT button DISPLAY /Battery charging level Volume Up Channel Up Channel Down Volume Down Power Charging port Mute 1. Connection/Stand-By : Twelve bars on the upper display shows connectionor stand-by . 2. User Number: it shows the user number that your device is set to. 3. Channel: means the current channel number that your device is set to. If you are a master device, is displayed. 4. Battery: It indicates current battery level. When battery is running low, the battery ICON is blinking. Function 1.Power Power on, off with PWR button 2 sec 2. Current Setting Display Connection/ Stand-by 1 USER Number 2 Channel Number 3 Battery 4 More than 80% Below 50%Below 20% Note If device is left in standby mode for half hour, it is automatically turned off for power-saving. -05- Standby statusmeans the device is ready for pairing (No connection) Press&holdbutton to go to Menu and then choose “8. User”. Function -06- 3. Volume Setting Volume level ranges from 0 to 8. Note Volume 0 means no audio volume 4. User Number Setting User Number ranges from User 1 to User 12. Each device takes one user number, and user number for devices should be different from one another. STEP 1 STEP 2 Choose between “User 1” and “User 12” Note ●There should be one Master Device for group communication. ●Press&holdPTT button for transmission in “PA mode”. Press PTT button to select Press PTT button to complete Function 5. Channel Setting Devices should be set to same channel number for communication. If there are multiple communication groups in the same channel nearby, set channel number different from other groups to avoid potential interference. STEP 1 Choose…

Text truncated - open the document above for the full version.

Westcom Wireless Inc. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Westcom Wireless Inc. Address: 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States Product Name: ProCom FCC ID: 2AO37-ATLASAIR Model(s): ATLAS AIR, ATLASAIR-S 2.911(d)(5)(i) Equipment Type We, [Westcom Wireless Inc.] certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Frank Girardi Date: February 22, 2023 Title and Company name: NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Westcom Wireless Inc. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Westcom Wireless Inc. Address: 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States Product Name: ProCom FCC ID: 2AO37-ATLASAIR Model(s): ATLAS AIR, ATLASAIR-S 2.911(d)(5)(ii) Applicant filing We, [Westcom Wireless Inc.] certify that, as of the date of the filing of the application, the applicant is is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Frank Girardi Date: February 22, 2023 Title and Company name: President / Westcom Wireless Inc. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Westcom Wireless Inc. 2.911 (d)(7)USA Agent v1.3 Section 2.911(d)(7) USA Agent for Service of Process (Applicant is Both Grantee and U.S. Agent) Company name: Westcom Wireless Inc. Address: 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States Product Name: ProCom Grantee code: 2AO37 Model(s): ATLAS AIR, ATLASAIR-S 2.911(d)(7) USA Designated Agent for Service of Process This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Westcom Wireless Inc. 2.911 (d)(7)USA Agent v1.3 Applicant / USA Agent Company name: Westcom Wireless Inc. Address: 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States FCC Grantee Code: 2AO37 FRN No.: 0023758659 Contact Name: Frank Girardi Telephone No: +1-724-337-1400 Email: [email protected] Signature: Title: President Date: February 22, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Westcom Wireless Inc. Date: February 28, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: New Family Listing Declaration Please review the attached exhibits supporting our request for applying New Family Listing to the FCC ID: 2AO37-ATLASAIR for Company Name: Westcom Wireless Inc. Product Description: ProCom Base model: ATLAS AIR Additional model(s): ATLASAIR-S The only difference between the base model ATLAS AIR and the additional model(s) ATLASAIR-S is as follows: Model Name Differences ATLAS AIR Basic Model (Dual Muff and Speaker applied) ATLASAIR-S This model is identical to the basic model except that this model applies Single Muff and the Speaker is only equipped on the side applying muff. Should you have any questions, please contact us. Sincerely, Name: Frank Girardi Title: President

Westcom Wireless Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 22, 2023 Subject; Request for Confidentiality FCC ID: 2AO37-ATLASAIR To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Westcom Wireless Inc. Signature: Name: Frank Girardi Title: President

Letter of Authorization Company: Westcom Wireless Inc. Address: 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States Product Name: ProCom Model Number: ATLAS AIR, ATLASAIR-S FCC Identifier: 2AO37-ATLASAIR We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Frank Girardi Date: February 22, 2023 Title: President Signature of applicant:

Page 1 of 1 IDENTIFICATION LABEL: PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed inside of the equipment Label Size: 18.0 (H) x 47.2(L) mm Authorized Person Print Name: Frank Girardi Date: February 22, 2023 Signature:

Helical Antenna

Page 1 of 63 Report No. OT-232-RFD-001 This Report is not correlated with the authentication of KOLAS. It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-SAR-002(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) FCC SAR Test Report Test Report No. : OT-232-RFD-001 Reception No. : 2212003940 Applicant : Westcom Wireless Inc. Address : 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States Manufacturer : Westcom Wireless Inc. Address : 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States Type of Equipment : ProCom FCC ID : 2AO37-ATLASAIR Model Name : ATLAS AIR Multiple Model Name: ATLASAIR-S Serial number : N/A Total page of Report : 63 pages (including this page) Date of Incoming : October 27, 2022 Date of Test : January 17, 2023 Date of issue : February 22, 2023 SUMMARY The equipment complies with the regulation; CFR §2.1093. This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Tested by Young Chan, Lee / Engineer ONETECH Corp. Reviewed by Kyoung Hoo, Min / Senior Manager ONETECH Corp Approved by Cheon Sig, Choi / Technical Manager ONETECH Corp. Page 2 of 63 Report No. OT-232-RFD-001 This Report is not correlated with the authentication of KOLAS. It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-SAR-002(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) Revision history Report No. Reason for Change Date Issued OT-232-RFD-001 Initial release 2023-02-22 Page 3 of 63 Report No. OT-232-RFD-001 This Report is not correlated with the authentication of KOLAS. It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-SAR-002(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) TABLE OF CONTENTS 1. Summary of Maximum SAR Value ............................................................................ 4 2. Device Under Test .................................................................................................... 4 3. INTRODUCTION ...................................................................................................... 7 4. DOSIMETRIC ASSESSMENT .................................................................................. 9 5. TEST CONFIGURATION POSITIONS ................................................................... 10 6. RF EXPOSURE LIMITS .......................................................................................... 11 7. FCC MEASUREMENT PROCEDURES .................................................................. 12 8. RF CONDUCTED POWERS .................................................................................. 13 9. SYSTEM VERIFICATION ....................................................................................... 15 10. SAR TEST DATA SUMMARY ................................................................................. 17 11. EQUIPMENT LIST .................................................................................................. 19 12. MEASUREMENT UNCERTAINTIES ...................................................................... 20 13. CONCLUSION ........................................................................................................ 21 14. REFERENCES ....................................................................................................... 22 APPENDIX A: SYSTEM VERIFICATION ................................................................................... 24 APPENDIX B: SAR TEST DATA ............................................................................................... 26 APPENDIX C: PROBE & DIPOLE ANTENNA CALIBRATION .................................................. 29 APPENDIX D: SAR TISSUE SPECIFICATIONS ....................................................................... 58 APPENDIX E: SAR SYSTEM VALIDATION .............................................................................. 60 APPENDIX F: DUT ANTENNA DIAGRAM & SAR TEST SETUP PHOTOGRAPHS ................. 61 Page 4 of 63 Report No. OT-232-RFD-001 This Report is not correlated with the authentication of KOLAS. It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-SAR-002(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) 1. Summary of Maximum SAR Value Equipment Class Band & Mode Tx Frequency SAR 1 g Head (W/kg) 1 g Body (W/kg) 10g Hands (W/kg) DSS 900 ㎒ ISM Band 902 ~ 928 1.36 N/A N/A Simultaneous SAR per KDB 690783 D01v01r03: N/A N/A N/A Note: 1. This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for controlled environment/professional population exposure limits specified in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement procedures specified in Section 6 of this report. 2. Device Under Test 2.1. DUT Information DUT Type ProCom FCC ID 2AO37-ATLASAIR Model Name ATLAS AIR Additional Model Name(s) ATLASAIR-S Antenna Type Helical DUT Stage Identical Prototype Note: 1. For antenna peak gain and detailed antenna information, refer to the antenna report in FCC filing. 2. There are 2 model names for this product. The additional model is identical to the base model except for the muff. (Atlas Air: Dual muff headset, Atlas Air-S: Single muff headset) 2.2. Device Overview Band & Mode Operating Modes Tx Frequency [㎒] 900 ㎒ Band Data 902 ~ 928 2.3. Power Reduction for SAR There is no power reduction used for any band/mode implemented in the dev…

Text truncated - open the document above for the full version.

Page 1 of 92 Report No. : OT-231-RWD-034 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) RADIO PERFORMANCE TEST REPORT Test Report No. : OT-231-RWD-034 Reception No. : 2212003940 Applicant : Westcom Wireless Inc. Address : 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States Manufacturer : Westcom Wireless Inc. Address : 2773 Leechburg Road, Lower Burrell, Pennsylvania, 15068, United States Type of Equipment : ProCom FCC ID. : 2AO37-ATLASAIR Model Name : ATLAS AIR Multiple Model Name : ATLASAIR-S Serial number : N/A Total page of Report : 92 pages (including this page) Date of Incoming : October 28, 2022 Date of issue : January 31, 2023 SUMMARY The equipment complies with the regulation; FCC PART 15 SUBPART C Section 15.247 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. This report is not correlated with the "KS Q ISO/IEC 17025 and KOLAS accreditation" of Korean Laboratory Accreditation Scheme. Tested by Soon-Ki, Choi / Engineer ONETECH Corp. Reviewed by Tae-Ho, Kim / General Manager ONETECH Corp. Approved by Ki-Hong, Nam / General Manager ONETECH Corp. Page 2 of 92 Report No. : OT-231-RWD-034 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS Page 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 6 2. TEST SUMMARY .............................................................................................................................................................. 7 2.1 Test items and results ................................................................................................................................................... 7 2.2 Additions, deviations, exclusions from standards ...................................................................................................... 8 2.3 Related Submittal(s) / Grant(s) .................................................................................................................................... 8 2.4 Purpose of the test ......................................................................................................................................................... 8 2.5 Test Methodology ......................................................................................................................................................... 8 2.6 Test Facility ................................................................................................................................................................... 8 3. GENERAL INFORMATION ............................................................................................................................................ 9 3.1 Product Description ...................................................................................................................................................... 9 3.2 Alternative type(s)/model(s); also covered by this test report. .................................................................................. 9 4. EUT MODIFICATIONS .................................................................................................................................................... 9 5. SYSTEM TEST CONFIGURATION ............................................................................................................................. 10 5.1 Justification ................................................................................................................................................................. 10 5.2 Peripheral equipment ................................................................................................................................................. 10 5.3 Mode of operation during the test ............................................................................................................................. 10 5.4 Configuration of Test System .................................................................................................................................... 16 5.5 Antenna Requirement ................................................................................................................................................ 16 6. PRELIMINARY TEST .................................................................................................................................................... 16 6.1 AC Power line Conducted Emissions Tests .............................................................................................................. 16 6.2 General Radiated Emissions Tests ............................................................................................................................ 16 7. MAXIMUM PEAK OUTPUT POWER ......................................................................................................................... 17 7.1 Operating environment .............................................................................................................................................. 17 7.2 Test set-up ................................................................................................................................................................... 17 7.3 Test Date ...................................................................................................................................................................... 17 7.4 Te…

Text truncated - open the document above for the full version.

ATLAS AIR ANTENNA PARTTERN ANTENNA H CUT ANTENNA V CUT Antenna Size: 23 X 8 X 10 mm

Page 1 of 3 - Conducted Emission Test Page 2 of 3 - Radiated Emission Test (Below 1 GHz) Page 3 of 3 - Radiated Emission Test (Above 1 GHz)