2AO5F-6000AMKIIIntegrated Amplifier

6000A MKIIUser Manual AC 220-240V ～ 50/60Hz 330W FUSE T2.0AL 250V ON OFF RIGHTLEFT OUT IN 12V TRIG UPDATE ARC OPT 1OPT 2 COAX 2 OUT PRE POWER AUX1 AUX2 AUX3 PHONO L R INPUT ANALOG DIGITAL INPUT COAX 1 SN: 6000A MKII DESIGNED AND ENGINEERED IN THE U.K. INTEGRATED AMPLIFIER MODEL: 6000A MKII Made in China Class 2 Wiring This lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install under the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet. Protect the power cord from being stepped on or pinched, particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilt or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Do not install this equipment in a confined or built-in space such as a bookcase or similar unit, and keep well ventilated in an open space. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains etc. WARNING: Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc). WARNING: Please refer to the information on the exterior panel of the enclosure for electrical and safety information before installing or operating the apparatus. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall not be placed on the apparatus. WARNING: For the terminals marked with the symbol “ ” may be of sufficient magnitude to constitute a risk of electric shock. The external wiring connected to the terminals requires installation by an instructed person or the use of ready-made leads or cords. WARNING: No naked flame sources, such as lighted candles, should be placed on the apparatus. WARNING: Attention should be drawn to the environmental aspects of battery disposal. WARNING: Use of the apparatus in tropical climates. THE FUSE VALUES ARE: 220 – 240V (UK, China, etc.) T2.0AL 250V Slow Blow 100 – 120V (USA, Japan, etc.) T4 .0AL 250V Slow Blow Ground protection terminal. This product should be connected to a power outlet with ground protection. Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord. Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan. Apparatet må tilkoples jordet stikkontakt. Apparaten skall anslutas till jordat uttag. Denmark: Finland: Norway: Sweden: Important Safety Information Important Safety Information Getting Started Controls and Connectors Remote Handset Connections Operation Warranty Coverage Specifications 1: Important Safety Information • • • • The Bluetooth® word mark and logos are registered trademarks, owned by Bluetooth SIG, Inc. and any use of such marks by IAG Group Ltd is under license. Other trademarks and trade names are those of their respective owners. aptX® software is copyright CSR plc. or its group companies. All rights reserved. The aptX® mark and the aptX® logo are trademarks of CSR plc. or one of its group companies and may be registered in one or more jurisdictions. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L' appareil ne doit pas produire de brouillage; (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference…

Text truncated - open the document above for the full version.

IAGGroupLtd. Level1ElectronicsBuilding,SanecoreIndustrialPark,Jiuwei,Hangcheng,BaoAnDistrict,Shenzhen,Guangdong,China Date:Oct.11,2024 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 FCCID:2AO5F-6000AMKII USAgent–AttestationStatement/Part2.911(d)(7) [IAGGroupLtd.]certifies,thatasof[Oct.11,2024],wehavedesignatedFCCUSAgent,LLCtoacceptserviceof processonourbehalfforFCCID:2AO5F-6000AMKII. [IAGGroupLtd.],acceptstomaintainanagentofserviceofprocessintheUnitedStatesfornolessthanoneyearafter eitherthegranteehaspermanentlyterminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S., ortheconclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheveris later. FCCUSAgent,LLC,acceptsasofthedateofthefilingofthisapplication,theobligationofbeingthedesignatedagent forthepurposeofacceptingserviceofprocessonbehalfof[IAGGroupLtd.]for FCCID:2AO5F-6000AMKII. DesignatedAgentInformation: CompanyName:FCCUSAgent,LLC FRN:0033402884 Address:3722IllinoisAvenue,SaintCharles,IL,60174,USA ContactPerson:TimPayne Phone:708-571-3148 Email:[email protected] Sincerely, Company:[IAGGroupLtd.]DesignatedAgent:FCCUSAgent,LLC CompanyRepresentative:[shilaiJiang] Tel:+86-0755-27483908 Email:[email protected] FRN:0027296714 DesignatedAgentRepresentative:TimPayne Signature:Signature:

IAGGroupLtd. Level1ElectronicsBuilding,SanecoreIndustrialPark,Jiuwei,Hangcheng,BaoAnDistrict,Shenzhen,Guangdong,China FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:Oct.11,2024 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2AO5F-6000AMKII [IAGGroupLtd.](“theapplicant”)certifiesthattheequipmentforwhichauthorizationissoughtisnot “covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903of theFCCrules. Sincerely, (Applicantsignature) (shilaiJiang)

IAGGroupLtd. Level1ElectronicsBuilding,SanecoreIndustrialPark,Jiuwei,Hangcheng,BaoAnDistrict,Shenzhen,Guangdong,China FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:Oct.11,2024 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2AO5F-6000AMKII [IAGGroupLtd.](“theapplicant”)certifiesthat,asofthedateofthefilingoftheapplication,the applicantisnotidentifiedontheCoveredListasanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (shilaiJiang)

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: IAG Group Ltd. Address: Level 1 Electronics Building, Sanecore Industrial Park, Jiuwei, Hangcheng, Bao An District,Shenzhen,Guangdong, China Product Name: Integrated Amplifier Model Number: 6000A MKII FCC Identifier: 2AO5F-6000AMKII We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: shilai Jiang Date: Nov. 11, 2024 Title: Manager Signature of applicant:

IAG Group Ltd. Level 1 Electronics Building, Sanecore Industrial Park, Jiuwei, Hangcheng, Bao An District,Shenzhen,Guangdong, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Oct. 11, 2024 Subject; Request for Confidentiality FCC ID: 2AO5F-6000AMKII To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: shilai Jiang

Report No.: AGC02150240803AP03 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT BT Antenna Report No.: AGC02150240803AP03 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC02150240803AP03 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC02150240803AP03 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID&IC Label Location 40mm&30mm FCC ID: 2AO5F-6000AMKII IC: 23689-6000AMKII HVIN: 6000A MKII

Report No.: AGC02150240803AP03 Page 1 of 13 INTERNAL PHOTOS PORT VIEW OF EUT (FIGURE 1) PORT VIEW OF EUT (FIGURE 2) Report No.: AGC02150240803AP03 Page 2 of 13 PORT VIEW OF EUT (FIGURE 3) PORT VIEW OF EUT (FIGURE 4) Report No.: AGC02150240803AP03 Page 3 of 13 OPEN VIEW OF EUT INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC02150240803AP03 Page 4 of 13 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC02150240803AP03 Page 5 of 13 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC02150240803AP03 Page 6 of 13 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC02150240803AP03 Page 7 of 13 INTERNAL VIEW OF EUT (FIGURE 8) INTERNAL VIEW OF EUT (FIGURE 9) Report No.: AGC02150240803AP03 Page 8 of 13 INTERNAL VIEW OF EUT (FIGURE 10) INTERNAL VIEW OF EUT (FIGURE 11) Report No.: AGC02150240803AP03 Page 9 of 13 INTERNAL VIEW OF EUT (FIGURE 12) INTERNAL VIEW OF EUT (FIGURE 13) Report No.: AGC02150240803AP03 Page 10 of 13 INTERNAL VIEW OF EUT (FIGURE 14) INTERNAL VIEW OF EUT (FIGURE 15) Report No.: AGC02150240803AP03 Page 11 of 13 INTERNAL VIEW OF EUT (FIGURE 16) INTERNAL VIEW OF EUT (FIGURE 17) Report No.: AGC02150240803AP03 Page 12 of 13 INTERNAL VIEW OF EUT (FIGURE 18) INTERNAL VIEW OF EUT (FIGURE 19) Report No.: AGC02150240803AP03 Page 13 of 13 INTERNAL VIEW OF EUT (FIGURE 20) ****************************************End of Report*************************************

Page 1 of 10 RF Exposure Report Report No.: AGC02150240803FH01 FCC ID : 2AO5F-6000AMKII APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Integrated Amplifier BRAND NAME : Audiolab MODEL NAME : 6000A MKII APPLICANT : IAG Group Ltd. DATE OF ISSUE : Oct. 11, 2024 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC02150240803FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 11, 2024 Valid Initial Release Report No.: AGC02150240803FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC02150240803FH01 Page 4 of 10 1. General Information Applicant IAG Group Ltd. Address Level 1 Electronics Building, Sanecore Industrial Park, Jiuwei, Hangcheng, Bao A n District, Shenzhen, Guangdong, China. Manufacturer Sanecore Audio (Ji'an) Co., Ltd Address Fenghuang lndustrial Park, Ji’an County, Ji’an City, Jiangxi, China Factory Sanecore Audio (Ji'an) Co., Ltd Address Fenghuang lndustrial Park, Ji’an County, Ji’an City, Jiangxi, China Product Designation Integrated Amplifier Brand Name Audiolab Test Model 6000A MKII Series Model(s) N/A Difference Description N/A Date of receipt of test item Aug. 30, 2024 Date of Test Aug. 30, 2024 to Oct. 11, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Jack Gui (Project Engineer) Oct. 11, 2024 Reviewed By Calvin Liu (Reviewer) Oct. 11, 2024 Approved By Max Zhang Authorized Officer Oct. 11, 2024 Report No.: AGC02150240803FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version v1.0 Software Version v1.0 Modulation Type BR GFSK, EDR π /4-DQPSK, 8DPSK BLE GFSK 1Mbps GFSK 2Mbps Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation External Antenna Antenna Gain 3.6dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC02150240803FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC02150240803FH01 Page 7 of 10 3.3 Environmental Conditions Normal Conditions Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure r…

Text truncated - open the document above for the full version.

Page 1 of 76 FCC Test Report Report No.: AGC02150240803FR01 FCC ID : 2AO5F-6000AMKII APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Integrated Amplifier BRAND NAME : Audiolab MODEL NAME : 6000A MKII APPLICANT : IAG Group Ltd. DATE OF ISSUE : Oct. 11, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC02150240803FR01 Page 2 of 76 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 11, 2024 Valid Initial Release Report No.: AGC02150240803FR01 Page 3 of 76 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies and Behaviour................................................................................ 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4. System Test Configuration ........................................................................................................................... 14 4.1 EUT Configuration ................................................................................................................................... 14 4.2 EUT Exercise ........................................................................................................................................... 14 4.3 Configuration of Tested System .............................................................................................................. 14 4.4 Equipment Used in Tested System ......................................................................................................... 14 4.5 Summary of Test Results ........................................................................................................................ 15 5. Description of Test Modes ........................................................................................................................... 16 6. RF Output Power Measurement .................................................................................................................. 17 6.1 Provisions Applicable .............................................................................................................................. 17 6.2 Measurement Procedure ......................................................................................................................... 17 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 17 6.4 Measurement Result ............................................................................................................................... 18 7. 20dB Bandwidth and 99% Occupied Bandwidth Measurement ............................................................... 24 7.1 Provisions Applicable .............................................................................................................................. 24 7.2 Measurement Procedure ......................................................................................................................... 24 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 24 7.4 Measurement Results ............................................................................................................................. 25 8. Conducted Band Edge and Out-of-Band Emissions ..................................…

Text truncated - open the document above for the full version.

Report No.: AGC02150240803FR01 Page 70 of 76 12. Frequency Separation Measurement 12.1 Provisions Applicable When the power is less than 0.125W: The minimum permissible channel separation for this system is 2/3 the value of the 20dB BW. When the power is less than 1W: The minimum permissible channel separation for this system is 20dB BW. 12.2 Measurement Procedure The EUT shall have its hopping function enabled. Use the following spectrum analyzer settings: 1. Span: Wide enough to capture the peaks of two adjacent channels. 2. RBW: Start with the RBW set to approximately 30% of the channel spacing; adjust as necessary to best identify the center of each individual channel. 3. Video (or average) bandwidth (VBW) ≥ RBW. 4. Sweep: Auto. 5. Detector function: Peak. 6. Trace: Max hold. g) Allow the trace to stabilize. 7. Use the marker-delta function to determine the separation between the peaks of the adjacent channels. 12.3 Measurement Setup (Block Diagram of Configuration) 12.4 Measurement Result Test Data of Frequency Separation Test Mode Channel Separation (MHz) Limits (MHz) Pass or Fail 8DPSK Hopping 1.005 ≥0.873 Pass Report No.: AGC02150240803FR01 Page 71 of 76 Test Graphs of Frequency Separation Test_Graph_EDR_HOP_ANT1_NA_3Mbps_Hopping Separation Note: All mode rates are tested and evaluated, 8DPSK modulated 3DH5 mode is the worst case and documented in the report. Report No.: AGC02150240803FR01 Page 72 of 76 13. AC Power Line Conducted Emission Test 13.1 Measurement Limit Frequency Maximum RF Line Voltage Q.P. (dBμV) Average (dBμV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 13.2 Measurement Setup (Block Diagram of Configuration) Report No.: AGC02150240803FR01 Page 73 of 76 13.3 Preliminary Procedure of Line Conducted Emission Test 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2. Support equipment, if needed, was placed as per ANSI C63.10. 3. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. 4. All support equipment received AC120V/60Hz power from a LISN, if any. 5. The EUT received AC120V/60Hz power from a LISN. 6. The test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. 7. Analyzer / Receiver scanned from 150 kHz to 30MHz for emissions in each of the test modes. 8. During the above scans, the emissions were maximized by cable manipulation. 9. The test mode(s) were scanned during the preliminary test. Then, the EUT configuration and cable configuration of the above highest emission level were recorded for reference of final testing. 13.4 Final Procedure of Line Conducted Emission Test 1. EUT and support equipment was set up on the test bench as per step 2 of the preliminary test. 2. A scan was taken on both power lines, Line 1 and Line 2, recording at least the six highest emissions. Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. If EUT emission level was less – 2dB to the A.V. limit in Peak mode, then the emission signal was re-checked using Q.P and Average detector. 3. The test data of the worst case condition(s) was reported on the Summary Data page. 13.5 Measurement Results Report No.: AGC02150240803FR01 Page 74 of 76 AC Power Line Conducted Emission Test Test Mode Mode 1 LISN Line Hot Side RESULT: Pass Report No.: AGC02150240803FR01 Page 75 of 76 AC Power Line Conducted Emission Test Test Mode Mode 1 LISN Line Neutral Side RESULT: Pass Report No.: AGC02150240803FR01 Page 76 of 76 Appendix I: Photographs of Test Setup Refer to the Report No.: AGC02150240803AP02 Appendix II: Photographs of Test EUT Refer to the Report No.: AGC02150240803AP03 -----End of Report----- …

Text truncated - open the document above for the full version.