2AO5F-D9D/A CONVERTER

User Manual D9 Important Safety Information This lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions: Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install under the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarised or grounding-type plug. A polarised plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet. Protect the power cord from being stepped on or pinched, particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilt or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Do not install this equipment in a confined or built-in space such as a bookcase or similar unit, and keep well ventilated in an open space. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains etc. WARNING: Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.). WARNING: Please refer to the information on the exterior panel of the enclosure for electrical and safety information before installing or operating the apparatus. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on the apparatus. WARNING: For the terminals marked with the symbol of “ ” may be of sufficient magnitude to constitute a risk of electric shock. The external wiring connected to the terminals requires installation by an instructed person or the use of ready-made leads or cords. WARNING: No naked flame sources, such as lighted candles, should be placed on the apparatus. WARNING: Attention should be drawn to environmental aspects of battery disposal. WARNING: Use of the apparatus in tropical climates. THE FUSE VALUES ARE: 220 – 240V (UK, China, etc.) T1.0AL 250V Slow Blow 100 – 120V (USA, Japan, etc.) T1.6AL 250V Slow Blow Ground protection terminal. This product should be connected to a power outlet with ground protection. Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord. Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan. Apparatet må tilkoples jordet stikkontakt. Apparaten skall anslutas till jordat uttag. Denmark: Finland: Norway: Sweden: Important Safety Information The Bluetooth® word mark and logos are registered trademarks, owned by Bluetooth SIG, Inc. and any use of such marks by IAG Group Ltd is under license. Other trademarks and trade names are those of their respective owners. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries. Being Roon Tested means that IAG Group Ltd and Roon have collaborated to ensure you have the best experience using Roon, software and IAG Group Ltd equipment together, so you can just enjoy the music. MQA (Master Quality Authenticated) MQA is an award-winning British technology that delivers the sound of the original master recording. The master MQA file is fully authenticated and is small enough to stream or download. Visit mqa.co.uk for more information. D9 includes MQA technology, which enables you to playback MQA audio files and streams, delivering the sound of the original master recording. The audiolab D9 LED on screen glows green or blue to indicate that the unit is decoding and playing an MQA stream or file, and denotes provenance to ensure that the sound is identical to that of the source material. It glows blue to indicate it is playing an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner 1: Important Safety Information • • • • The Bluetooth® word mark and logos are registered trademarks, owned by Bluetooth SIG, Inc. and any use of such marks by IAG Group Ltd is under license. Other trademarks and trade names are those of their respective owners. aptX® software is copyright CSR plc. or its group companies. All rights reserved. The aptX® mark and the aptX® logo are trademarks of CSR plc. or one of its group com…

Text truncated - open the document above for the full version.

IAGGroupLtd. Level1ElectronicsBuilding,SanecoreIndustrialPark,Jiuwei,Hangcheng,BaoAnDistrict,Shenzhen,Guangdong,China Date:Oct.11,2024 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 FCCID:2AO5F-D9 USAgent–AttestationStatement/Part2.911(d)(7) [IAGGroupLtd.]certifies,thatasof[Oct.11,2024],wehavedesignatedFCCUSAgent,LLCtoacceptserviceof processonourbehalfforFCCID:2AO5F-D9. [IAGGroupLtd.],acceptstomaintainanagentofserviceofprocessintheUnitedStatesfornolessthanoneyearafter eitherthegranteehaspermanentlyterminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S., ortheconclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheveris later. FCCUSAgent,LLC,acceptsasofthedateofthefilingofthisapplication,theobligationofbeingthedesignatedagent forthepurposeofacceptingserviceofprocessonbehalfof[IAGGroupLtd.]for FCCID:2AO5F-D9. DesignatedAgentInformation: CompanyName:FCCUSAgent,LLC FRN:0033402884 Address:3722IllinoisAvenue,SaintCharles,IL,60174,USA ContactPerson:TimPayne Phone:708-571-3148 Email:[email protected] Sincerely, Company:[IAGGroupLtd.]DesignatedAgent:FCCUSAgent,LLC CompanyRepresentative:[shilaiJiang] Tel:+86-0755-27483908 Email:[email protected] FRN:0027296714 DesignatedAgentRepresentative:TimPayne Signature:Signature:

IAGGroupLtd. Level1ElectronicsBuilding,SanecoreIndustrialPark,Jiuwei,Hangcheng,BaoAnDistrict,Shenzhen,Guangdong,China FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:Oct.11,2024 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2AO5F-D9 [IAGGroupLtd.](“theapplicant”)certifiesthattheequipmentforwhichauthorizationissoughtisnot “covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903of theFCCrules. Sincerely, (Applicantsignature) (shilaiJiang)

IAGGroupLtd. Level1ElectronicsBuilding,SanecoreIndustrialPark,Jiuwei,Hangcheng,BaoAnDistrict,Shenzhen,Guangdong,China FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:Oct.11,2024 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2AO5F-D9 [IAGGroupLtd.](“theapplicant”)certifiesthat,asofthedateofthefilingoftheapplication,the applicantisnotidentifiedontheCoveredListasanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (shilaiJiang)

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: IAG Group Ltd. Address: Level 1 Electronics Building, Sanecore Industrial Park, Jiuwei, Hangcheng, Bao An District,Shenzhen,Guangdong, China Product Name: D/A CONVERTER Model Number: D9 FCC Identifier: 2AO5F-D9 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: shilai Jiang Date: Nov. 11, 2024 Title: Manager Signature of applicant:

IAG Group Ltd. Level 1 Electronics Building, Sanecore Industrial Park, Jiuwei, Hangcheng, Bao An District,Shenzhen,Guangdong, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Oct. 11, 2024 Subject; Request for Confidentiality FCC ID: 2AO5F-D9 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: shilai Jiang

Report No.: AGC02150240804AP03 Page 1 of 5 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC02150240804AP03 Page 2 of 5 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC02150240804AP03 Page 3 of 5 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC02150240804AP03 Page 4 of 5 RIGHT VIEW OF EUT PORT VIEW-1 OF EUT BT Antenna Report No.: AGC02150240804AP03 Page 5 of 5 PORT VIEW-2 OF EUT PORT VIEW-3 OF EUT ****************************************End of Report*************************************

FCC ID&IC Label Location 40mm&30mm FCC ID: 2AO5F-D9 IC: 23689-D9 HVIN: D9

Report No.: AGC02150240804AP03 Page 1 of 7 INTERNAL PHOTOS INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC02150240804AP03 Page 2 of 7 INTERNAL VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 4) Report No.: AGC02150240804AP03 Page 3 of 7 INTERNAL VIEW OF EUT (FIGURE 5) INTERNAL VIEW OF EUT (FIGURE 6) Report No.: AGC02150240804AP03 Page 4 of 7 INTERNAL VIEW OF EUT (FIGURE 7) INTERNAL VIEW OF EUT (FIGURE 8) Report No.: AGC02150240804AP03 Page 5 of 7 INTERNAL VIEW OF EUT (FIGURE 9) INTERNAL VIEW OF EUT (FIGURE 10) Report No.: AGC02150240804AP03 Page 6 of 7 INTERNAL VIEW OF EUT (FIGURE 11) INTERNAL VIEW OF EUT (FIGURE 12) Report No.: AGC02150240804AP03 Page 7 of 7 INTERNAL VIEW OF EUT (FIGURE 13) ****************************************End of Report*************************************

Page 1 of 10 RF Exposure Report Report No.: AGC02150240804FH01 FCC ID : 2AO5F-D9 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : D/A CONVERTER BRAND NAME : Audiolab MODEL NAME : D9 APPLICANT : IAG Group Ltd. DATE OF ISSUE : Oct. 11, 2024 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC02150240804FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 11, 2024 Valid Initial Release Report No.: AGC02150240804FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC02150240804FH01 Page 4 of 10 1. General Information Applicant IAG Group Ltd. Address Level 1 Electronics Building, Sanecore Industrial Park, Jiuwei, Hangcheng, Bao An District, Shenzhen, Guangdong, China. Manufacturer Sanecore Audio（Ji'an）Co., Ltd Address Fenghuang lndustrial Park, Ji’an County, Ji’an City, Jiangxi, China Factory Sanecore Audio（Ji'an）Co., Ltd Address Fenghuang lndustrial Park, Ji’an County, Ji’an City, Jiangxi, China Product Designation D/A CONVERTER Brand Name Audiolab Test Model D9 Series Model(s) N/A Difference Description N/A Date of receipt of test item Aug. 30, 2024 Date of Test Aug. 30, 2024 - Oct. 11, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Jack Gui (Project Engineer) Oct. 11, 2024 Reviewed By Calvin Liu (Reviewer) Oct. 11, 2024 Approved By Max Zhang (Authorized Officer) Oct. 11, 2024 Report No.: AGC02150240804FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version v1.0 Software Version v1.0 Modulation Type BT_BLE: GFSK BT_BR_EDR: GFSK, π /4-DQPSK, 8DPSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation External Antenna Antenna Gain 3.6dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC02150240804FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC02150240804FH01 Page 7 of 10 3.3 Environmental Conditions Normal Conditions Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 106 Power supply AC 120V Report No…

Text truncated - open the document above for the full version.

Page 1 of 67 FCC Test Report Report No.: AGC02150240804FR01 FCC ID : 2AO5F-D9 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : D/A CONVERTER BRAND NAME : Audiolab MODEL NAME : D9 APPLICANT : IAG Group Ltd. DATE OF ISSUE : Oct. 11, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC02150240804FR01 Page 2 of 67 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Oct. 11, 2024 Valid Initial Release Report No.: AGC02150240804FR01 Page 3 of 67 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ..................................................................................................................... 6 2.2 Test Frequency List ..................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ................................................................................................................. 7 2.4 Test Methodology......................................................................................................................................... 7 2.5 Special Accessories ..................................................................................................................................... 7 2.6 Equipment Modifications ............................................................................................................................. 7 2.7 Antenna Requirement .................................................................................................................................. 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory .................................................................................................................... 8 3.2 Test Facility .................................................................................................................................................. 8 3.3 Environmental Conditions ........................................................................................................................... 9 3.4 Measurement Uncertainty ........................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................... 10 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ..................................................................................................................................... 12 4.2 EUT Exercise ............................................................................................................................................. 12 4.3 Configuration of Tested System ................................................................................................................ 12 4.4 Equipment Used In Tested System ........................................................................................................... 12 4.5 Summary of Test Results ........................................................................................................................... 13 5. Description of Test Modes ........................................................................................................................... 14 6. Duty Cycle Measurement ............................................................................................................................. 15 7. RF Output Power Measurement .................................................................................................................. 16 7.1 Provisions Applicable ................................................................................................................................. 16 7.2 Measurement Procedure ........................................................................................................................... 16 7.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 16 7.4 Measurement Result ................................................................................................................................. 17 8. 6dB Bandwidth Measurement ...................................................................................................................... 21 8.1 Provisions Applicable ................................................................................................................................. 21 8.2 Measurement Procedure ........................................................................................................................... 21 8.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 21 8.4 Measurement Results ................................................................................................................................ 22 9. Power Spectral Density Measurement ........................................................................................................ 29 9.1 Provisions Applicable .............................................................................................................…

Text truncated - open the document above for the full version.

深圳市飞敏科技有限公司 ShenZhen City FeiMin Technology CO.,LTD. 产品承认书 SPECIFICATION FOR APPROVED 客户 CUSTOMER: IA**URXS/WG 产品名称 PRODUCTS: ExWHUQDOGXDOIUHqXHQF\UXbbHUURGDQWHQQD 客户料号 PART NO: 产品型号 Spec.: FM-S1253-External dual frequency 160mm (outlet) 日期 Data: 2020.09.22 备注：承认盖章后请回复一份承认书（或复印件）给我司，其余由贵公司存档 REMARK:Please send us one(or copy)of this approval with stamp after accepting,other copies filed by the customer. 地址：深圳市宝安区西乡街道固戍社区恒南一路C栋厂房303室 ADD:Room 303,Building C,Hengnan one Road,Gushu community,Xixiang Street,Bao’an District,Shenzhen City 电话Tel: 0755-23035723 传真Fax: 0755-23036702 邮箱E-mail: [email protected] 网址HTTP:www.fmant.cn 客户 CUSTOMER 承认 ACCEPTED BY 审核 CHECKED BY 批准 APPROVED BY 供应商 SUPPLIER 拟制 PREPARED BY 审核 CHECKED BY 批准 APPROVED BY 方雨薇 杨权生 马冬冬 ANTENNA SPECIFICATION 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 1 目录 产品承认书 .................................................................................................... 1 1. 项目信息Project Information .................................................................. 3 1.1. 外观尺寸Appearance and Dimensions ........................................... 3 1.2. 产品实物picture of real products ................................................. 4 2. 电气性能 Electrical Characteristics ........................................................ 4 2.1. 测试环境条件Test Environment Conditions .................................. 4 2.2. 测示方法Measurement method ...................................................... 4 2.2.1. 电压驻波比VSWR ........................................................................ 5 2.2.2. 回波损耗Log Mag ...................................................................... 5 2.3. 效率及增益Efficiency and Gain ................................................. 5 2.3.1. 测试系统Test system .............................................................. 5 2.3.2. 无源数据No-source test data .............................................. 6 2.3.3. 3D Radiation Drawing ............................................................. 7 2.3.4. directional drawing of horizontal plane....................... 7 3. 备注Notes ................................................................................................ 9 4. 可靠性测试Reliability test ...................................................................... 9 5. 产品包装规范Product packaging specification ................................... 10 ANTENNA SPECIFICATION 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 2 Revision history 版本 日期 状态 A1 2020-09-22 首版 ANTENNA SPECIFICATION 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 3 1. 项目信息Project Information 1.1. 外观尺寸Appearance and Dimensions ANTENNA SPECIFICATION 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 4 1.2. 产品实物picture of real products 2. 电气性能 Electrical Characteristics 2.1. 测试环境条件Test Environment Conditions 温度Temperature Ordinary Temperature (5 to 35°C) 湿度Humidity Ordinary Humidity (25 to 85% RH) 2.2. 测示方法Measurement method ANTENNA SPECIFICATION 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 5 2.2.1. 电压驻波比VSWR 2.2.2. 回波损耗Log Mag 2.3. 效率及增益Efficiency and Gain 2.3.1. 测试系统Test system ANTENNA SPECIFICATION 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 6 2.3.2. 无源数据No-source test data Frequency (MHz) Gain (dBi) Efficiency (%) 2400 MHz 3.6 67.39 2410 MHz 3.53 67.12 2420 MHz 3.43 65.72 2430 MHz 3.26 63.57 2440 MHz 3.14 61.5 2450 MHz 3.14 61.22 2460 MHz 3.14 60.72 2470 MHz 3.14 60.84 2480 MHz 3.06 61.01 2490 MHz 3.13 60.74 2500 MHz 3.18 61.14 Frequency (MHz) Gain (dBi) Efficiency (%) 5150 MHz 3.36 27.68 5250 MHz 3.19 35.34 5350 MHz 3.71 27.18 5450 MHz 3.4 36.55 5550 MHz 2.57 39.97 5650 MHz 2.93 39.43 5750 MHz 2.21 36.71 5850 MHz 2.15 35.67 ANTENNA SPECIFICATION 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 7 2.3.3. 3D Radiation Drawing 2.3.4. directional drawing of horizontal plane ANTENNA SPECIFICATION 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 8 ANTENNA SPECIFICATION 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 9 3. 备注Notes 1、安装时注意不能离金属部分太近，以避免影响天线性能。 2、此款天线只适用此机型，天线的位置不可以随意改动，若用于其它机器上导致效果变差，与我司无 关。 4. 可靠性测试Reliability test 项目 试验方法及条件 规格及要求 实验结果 存储环境 在没有指定的情况下测试温度、 湿度、气压如下： 1、温度为-30°C~+80°C 2、相对湿度为45%-85% 3、气压为86Kpa-106Kpa 外观无明显变化 各电性参数符合规格误差 OK 盐雾测试 盐水浓度50±10g/l (约 5%);PH6.5-7.2;试验温度35± 1°C;腐蚀时间16H. 判定方法:试验后用20倍 放大镜观察;无氧化之不 良;即判定合格 OK 振动测试 振频10-2000-10HZ 振幅1.52mm 沿X.Y.Z方向各10次 外观无明显变化 各电性参数符合规格误差 OK 跌落测试 从1M处跌落在木板上 外观无明显变化 各电性参数符合规格误差 OK 拉拔力测试 用推拉力计测试仪器测试其承 受力度：≧10N 外观无明显变化 各电性参数符合规格误差 OK 恒温恒湿测 试 温湿度 ：40°C± 2°C,90-95%RH 持续时间：4H 恢复时间：1-2H 外观无明显变化 各电性参数符合规格误差 OK 高低温测试 在70°C与40°C之间进行5次循 环，然后在正常条件下1-2H 外观无明显变化 各电性参数符合规格误差 OK ANTENNA SPECIFICATION 深圳市飞敏科技有限公司 Shenzhen Feimin Technology Co.,Ltd 10 5. 产品包装规范Product packaging specification 产品名称/规格 一、标签要求 内标签长5.5CM，宽2.2CM左右 外标签长8.8CM，4.4CM左右 二、装箱要求 作业说明： 1．内包装： 产品 PCS一袋 2．外包装： 根据实际数量定数量/箱 客户名称 供 应 商 深圳市飞敏科技有限公司 订单编号 ************* 物料编码 ************* 规格型号 ****** 产品名称 ******* 数 量 *****PCS 检验 备品 ***PC S 备注 供 应 商 深圳市飞敏科技有限公司 产品名称 ****** 物料编码 ************ 规格型号 ********** 数 量 ***PCS

Report No.: AGC02150240804AP02 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC02150240804AP02 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************