2AODL-EVRBA48ANAMSchneider Charge

General Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Schneider Electric USA, Inc., Address: 201 Washington Street One Boston Place, Suite 2700 Boston, Massachusetts, 02108 United States” Product Name: Schneider Charge FCC ID: 2AODL-EVRBA48ANAM Model(s): EVRBA48ANAMJ3400 & EVRBA48ANAMJ1772 2.911(d)(5)(i) Equipment Type – Electric Vehicle Supply Equipment (EVSE) We, Schneider Electric USA, Inc., (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: K Ajith Kumar Date: 29-Jan-2026 Title and Company name: Sr. General Manager and Schneider Electric NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats- to-the-communications-supply-chain-through-the

General Section 2.911_(d)(5)(ii) Certification Applicant v1.3 – Equipment Type Company name: Schneider Electric USA, Inc., Address: 201 Washington Street One Boston Place, Suite 2700 Boston, Massachusetts, 02108 United States” Product Name: Schneider Charge FCC ID: 2AODL-EVRBA48ANAM Model(s): EVRBA48ANAMJ3400 & EVRBA48ANAMJ1772 2.911(d)(5)(ii) Applicant filing We, Schneider Electric USA, Inc., (“the applicant”) certify that, as of the date of the filing of the application, the applicant is identified / is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: K. Ajith Kumar Date: 29-Jan-2026 Title and Company name: Sr. General Manager & Schneider Electric , NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national- security-threats-to-the-communications-supply-chain-through-the

General Section 2.911(d)(7) USA Agent for Service of Process Company name: Schneider Electric USA, Inc., Address: 201 Washington Street One Boston Place, Suite 2700 Boston, Massachusetts, 02108 United States” Product Name: Schneider Charge FCC ID: 2AODL-EVRBA48ANAM Model(s): EVRBA48ANAMJ3400 & EVRBA48ANAMJ1772 2.911(d)(7) USA Designated Agent for Service of Process We, Schneider Electric USA, Inc., (“the applicant”) designate Ajith Kumar K. NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. General USA Agent Company name: Schneider Electric USA Inc. USA Address: 201 Washington Street, One Boston Place, Suite 2700, Boston, Massachusetts 02108, United States FRN Number 0027014562 Contact Name: Ajith Kumar K. Telephone No: +91 98801 87859 Email: [email protected] Applicant Company name: Schneider Electric USA Inc. Address: 201 Washington Street, One Boston Place, Suite 2700, Boston, Massachusetts 02108, United States Grantee FRN Number: 0027014562 FCC Grantee Code: 2AODL Contact Name: Ajith Kumar K. Telephone No: +91 98801 87859 Email: [email protected] Signature: Name: K Ajith Kumar Title: Sr. General Manager, Storage Signature: Name: K Ajith Kumar Title: Sr. General Manager, Storage Date:02/13/2026 Date: 29-Jan-2026 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national- security-threats-to-the-communications-supply-chain-through-the

General Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 29-Jan-2026 Subject; Request for Confidentiality FCC ID: 2AODL-EVRBA48ANAM To Whom It May Concern, Pursuant to the provisions of the Commission’s rules of Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705 OR for180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Ajith Kumar K Title: Sr. General Manager, Storage

General Letter of Authorization Company: Schneider Electric USA, Inc., Address: “201 Washington Street One Boston Place, Suite 2700 Boston, Massachusetts, 02108 United States” Product Name: Schneider Charge Model Number(s): EVRBA48ANAMJ3400 & EVRBA48ANAMJ1772 Product Description: Electric Vehicle Supply Equipment (EVSE) We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above-named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 29-Jan-26 Name: Ajith Kumar Title: Sr. General Manager, Storage Company: Schneider Electric

Product Model Similarities/Differentiating Characteristics Manufacturer Schneider Electric Product Name Schneider Charge Model Number EVRBA48ANAMJ3400 EVRBA48ANAMJ1772 Sl. No Similarities 1. Used for AC Charging 2. 5 pin connector- L1, L2/N, PE, CP, PP 3. The PCBAs remain common for both the models of the cable 4. Both models are similar in terms of electrical ratings, as well as hardware and mechanical construction. Sl. No Differences 1. Uses SAE J3400 connector on the output cable that connects to EV. This connector (NACS) is significantly smaller and more compact than the SAE J1772 connector. Uses SAE J1772 connector on the output cable that connects to EV. It is Larger, bulkier connector design compared to SAE J3400 Note: Performing all tests on the J3400 sample has been considered acceptable for both models, as there are no changes in the EUT except for the EV connector, which is a bulkier connector (J1772). *Disclaimer: All product differentiating characteristics, including names, model numbers, and specifications, are derived from information and data supplied by the Manufacturer. Any unauthorized modifications or unstated variations could lead to discrepancies in test results. For comprehensive details and complete product specifications, please refer to the official product user manual.

JPS46924B Public Public Public Public Public Public Public DON O TU S E DO NOT USE EDITABLESOURCE PATHARTWORK B A C D E C O N T R OL PILOT 135.71 mm 19.81mm SmartAmp DON O TU S E DO NOT USE C O N T R OL PILOT SmartAmp 6 5 4 321 D C B A D C B 6 5 4 A 23 S.BHANDARY DONOTSCALE DIMENSIONSARE INMILLIMETERS 3RD ANGLE PROJECTION DRAWN: DRAWER LABELTERMINALBLOCK ACRESIEVSE SCALE:1:1SHEET1OF1 1 PARTNUMBER:REVISION: B TME67565A 03 DESIGNED: DESIGNERS.BHANDARYSIZE: FINISHEDPART(INCLUDINGALLSUB-COMPONENTS)MUST BE ROHSCOMPLIANT (EUROHS DIRECTIVE2015/863). MANUFACTURERWILLBEREQUIREDTOCERTIFYROHS COMPLIANCE.IFTHEREISACONFLICTBETWEENTHE SPECIFICATIONSANDROHSCOMPLIANCE,THEVENDOR MUSTCONTACTSCHNEIDERELECTRICFORCLARIFICATION. FINISHSEENOTES MATERIALSEENOTES TOLERANCES (UNLESSOTHERWISESPECIFIED) XX.XANGLES +/-1+/-0.5+/-1° CONFIDENTIALINFORMATIONOF SCHNEIDERELECTRIC ©COPYRIGHT2025SCHNEIDER ELECTRIC.ALL RIGHTSRESERVED.ALL TRADEMARKSAREOWNEDBY SCHNEIDERELECTRIC INDUSTRIES SASOR ITS AFFILIATEDCOMPANIESANDSHALLNOTBEUSEDOR REPRODUCEDIN ANY FORMOR FOR ANY PURPOSE WHATSOEVER,WITHOUTTHEEXPRESSWRITTEN PERMISSIONOFSCHNEIDERELECTRIC. REVISIONS DESCRIPTIONDRAWNCHECKEDAPPROVEDREGULATORYDATE 2025-07-04 2025-09-05 2026-01-06 NOTES: 1.MARKINGANDLABELINGSYSTEMSHALLCOMPLYWITHCSASTANDARDC22.2NO.0.15ANDUL969ANDITSSUB-CATEGORIESPGDQ2(US)&PGDQ8 (CANADA).REGIONSRESPECTIVELY.LABELMUSTBECERTIFIEDFOROUTDOORUSEONPOLYCARBONATEAPPLICATIONSURFACE. 2.COLOURS:SEECOLOURTABLEFORBACKGROUNDTEXTANDLINECOLOURS. 3.WHENCOLOURSARESPECIFIED,VENDORTOUSEUVCUREDSCREENINKTOENSUREFADERESISTANCE.THERMALTRANSFERPRINTINGISSUITABLE FORLABELSTHATUSEBLACKCOLOURONLY. 4.SERVICETEMPERATURERATINGOFALLMATERIALS:-40°CTO+100°CMINIMUM. 5.VENDORTOCOPYARTWORKTOCREATEINDIVIDUALLABELS.ARTWORKSHALLBEREFERREDTOFORANYDIMENSIONS/LOCATIONS. 6.LABELANDADHESIVESYSTEMMUSTBEAPPLICABLEFORAPPLICATIONTOHIGHSURFACEENERGY(HSE)ANDLOWSURFACEENERGY(LSE)PLASTICS, TEXTUREDANDCONTOUREDSURFACES,EPOXY/POLYSTERPOWDERCOATING,CARBONROLLSTEEL,GALVANIZED/GALVANNEALEDSTEELAND ALUMINIUMFORINDOOR/OUTDOORUSE. 7.LABELSSHOULDBEKISS-CUTTHROUGHTHELABELANDADHESIVEMATERIAL.KRAFTPAPERSHOULDNOTBECUT. 8.FIRSTOFFLABELSAMPLEMUSTBESUBMITTEDFORAPPROVALWITHFIRSTARTICLEINSPECTIONREPORTPRIORTOPRODUCTION.CONFORMANCEAND NON-CONFORMANCEITEMSTOBESHOWNONTHISDRAWINGWITHREPORTATTACHED. 9.DONOTPRINTDIE-LINE. A B SYMBOLCOLOURDESIGNATION SEWHITE3(RAL9003) COLOURDESIGNATION SEBLACK5(RAL 9005) PANTONE186C CSEGREEN2(PANTONE355C) D PANTONECOOLGREY11C E INITIALRELEASE S.BHANDARY 03 REVVER 01- 02- REMOVEDSHIELD,RX,TX HOMEREMOVED,NOTESUPDATED S.BHANDARY A ADDEDSMARTAMPLOGO,SCHNEIDER S.BHANDARY V.GOPAL S.MARIYAPPAS.CHAVAN

JPS46924B Public Public Public Public Public Public

TEST REPORT Page 1 of 11 Report Reference No. ....................... : 80260100018001 Sample ID ......................................... : BLC-01-0963916-001 Date of issue ..................................... : 27/04/2026 Total number of pages ...................... : 11 Testing Laboratory ............................ : TUV SUD South Asia Pvt Ltd Address............................................. : Plot No. 3-P1-B, Hitech Defence & Aerospace Park, KIADB Industrial Area, BK Palya, Bengaluru, Bengaluru North Taluk | Pin code – 562149 India Applicant’s name .............................. : Schneider Electric USA, Inc., Address............................................. : 201 Washington Street One Boston Place, Suite 2700 Boston, Massachusetts, 02108 United States Client Representative................ ... .: Ajith Kumar Test specification Standard............: RF Exposure Report FCC 47 CFR 1.1310, FCC 47 CFR Part 2.1093 / ISED RSS-102 Issue 6 Test Method ...................................... : FCC KDB 447498 and RSS-102 Issue 6 Non-standard test method............. : NA Test Report Form Number.............: LAB_F(EE)_138-049 Product Name..............................: Schneider Charge Test Item Description.....................: Electric Vehicle Supply Equipment (EVSE) Manufacturer ...............................: Schneider Electric Model Number..............................: EVRBA48ANAMJ3400, EVRBA48ANAMJ1772 Serial Number..............................: EP2-J3400-09 Ratings........................................: 208/240 VAC, 60 Hz FCC ID.......................................: 2AODL-EVRBA48ANAM IC ID..........................................: 24209-EVRBA48ANAM Prepared by (Name + Signature) ..........................: Nikhil G Reviewed & Approved by (Name + Signature) ..........................: Raghunath M N TEST REPORT Report Reference. No.: 80260100018001 Page 2 of 11 Possible test case verdicts: - test case does not apply to the test object .... : N/A - test object does meet the requirement .......... : Pass - test object does not meet the requirement .... : Fail Testing: Condition of the EUT on Receipt.....................: Good Date of receipt of test item ............................... : 06/10/2025 Date (s) of performance of tests....................... : 21/11/2025 to 26/03/2026 General remarks: 1. The submitted sample(s) were not drawn by laboratory. 2. The test results presented in this report relate only to the object tested. 3. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. 4. The correctness of the information related to sample(s) in the Test Request Form/Customer letterhead/E-mail is the customer’s responsibility. The laboratory reports the said information in the test report and is not liable for the same. 5. The laboratory will retain the sample(s) for 45 days except for the mandatory retention period specified by the Regulatory Bodies and unless otherwise specified by the client. 6. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. “(see Enclosure #)” refers to additional information appended to the report. “(see appended table)” refers to a table appended to the report. 7. Throughout this report a point is used as the decimal separator. Use of uncertainty of measurement for decisions on conformity (decision rule): Yes/No No decision rule is specified by the IEC/EN standard, when comparing the measurement result with the applicable limit according to the specification in that standard. The decisions on conformity are made without applying the measurement uncertainty (“simple acceptance” decision rule, previously known as “accuracy method”). Other: (to be specified) Decisions on conformity: Decision on conformity of results is based on as per standard limits or criteria. Summary of compliance: The Product comply with the requirements of FCC 47 CFR 1.1310, FCC 47 CFR Part 2.1093 / ISED RSS-102 Issue 6 TEST REPORT Report Reference. No.: 80260100018001 Page 3 of 11 Revision History of Records Test Report Number Version Reason for Change Date Issued 80260100018001 01 Initial Report 09/02/2026 80260100018001 02 TCB Review Comments 01/04/2026 80260100018001 03 TCB Review Comments 27/04/2026 TEST REPORT Report Reference. No.: 80260100018001 Page 4 of 11 CONTENTS 1 TEST SUMMARY .................................................................................................................................................................... 5 2 EQUIPMENT INFORMATION .................................................................................................................................................. 6 2.1 PRODUCT FUNCTION ............................................................................................................................................................. 6 2.2 PRODUCT MODEL SIMILARITIES/DIFFERENTIATING CHARACTERISTICS.............................................................................................. 6 2.3 GENERAL INFORMATION OF EUT ............................................................................................................................................. 7 2.4 ANTENNA CONFIGURATIONS EVALUATED .................................................................................................................................. 8 3 RF EXPOSURE EVALUATION METHOD ................................................................................................................................... 9 3.1 SCOPE ................................................................................................................................................................................ 9 3.2 RF EXPOSURE LIMITS ........................................................…

Text truncated - open the document above for the full version.

Copyright © 2024 YAGEO Corporation. All Rights Reserved. 1 Date 2025.04.29 W3917B0100 antenna measurement data Copyright © 2024 YAGEO Corporation. All Rights Reserved. 2 Prototype PCB trace antenna W3917B0100 Copyright © 2024 YAGEO Corporation. All Rights Reserved. 3 Return Loss W3917B0100 PCB trace antenna Copyright © 2024 YAGEO Corporation. All Rights Reserved. 4 Isolation Copyright © 2024 YAGEO Corporation. All Rights Reserved. 5 Test setup Y Z X Copyright © 2024 YAGEO Corporation. All Rights Reserved. 6 Performance—W3917B0100 Copyright © 2024 YAGEO Corporation. All Rights Reserved. 7 Radiation pattern—W3917B0100 2.4G Copyright © 2024 YAGEO Corporation. All Rights Reserved. 8 Radiation pattern—W3917B0100 5G Copyright © 2024 YAGEO Corporation. All Rights Reserved. 9 Performance—PCB trace antenna Copyright © 2024 YAGEO Corporation. All Rights Reserved. 10 Radiation pattern– PCB trace antenna 2.4G Copyright © 2024 YAGEO Corporation. All Rights Reserved. 11 Radiation pattern– PCB trace antenna 5G Copyright © 2024 YAGEO Corporation. All Rights Reserved. 12 Roundness(dB)---Theta=90 Copyright © 2024 YAGEO Corporation. All Rights Reserved. 13 Summary • All measurement data with mockup are tested in 3D chamber; • For W3917B0100, suggest to paste it close the top side on the insulation cover, which can far away from the PCBA; • Both PCB trace antenna and W3917B0100 can get good performance on WIFI2.4G &5G band. Copyright © 2024 YAGEO Corporation. All Rights Reserved. 14 WWW.YAGEO.COM Thank you!謝謝你!

Data Sheet #.A 2025-11-27 1 | YAGEOGroup.com Internal Antenna FPC Antenna W3917B0080H-2400-2500/4900-7125MHz Features & Applications:  Frequency is 2400-2500 / 4900-7125 MHz  Cable is φ1.13mm, black  Connector is MHF1 or equal.  WiFi6E, 802.11ax  Bluetooth, BLE, ZigBee  DSRC, ISM band radios, IoT, M2M ELECTRICAL SPECIFICATIONS @ 25 °C General Specifications– WiFi Antenna type Nominal Impedance Polarization Radiation pattern Power withstanding DC Ground Dipole 50Ω Vertical / Linear Omni 5W No ELECTRICAL SPECIFICATIONS @ 25°C Antenna: 2400 –2500;4900-7125MHz Frequency (MHz) 2400-2500 4900-7125 Return Loss(dB) <-6 <-10 Avg. Peak Gain avg (dBi) 2+/-1 3+/-1 Avg. Efficiency avg (%) 40 50 MECHANICAL SPECIFICATIONS W3917B0080H Dimension (Length x Width x Height) FPC Color Insulator Material Cable Type Connector Type Adhesive Tape 42.6x 8.6 x 0.15 mm (1.68 x 0.34 x 0.006 inch) Black FR700, Black, T=0.43mm 1.13mm, Black MHF1 Or Equal 3M467 ENVIRONMENTAL SPECIFICATIONS W3917B0080H Operating Temperature Storage Temperature RoHS Compliant -40/+85° C -40/+85° C Yes 2 | YAGEOGroup.com Data Sheet #.A 2025-11-27 Internal Antenna FPC Antenna W3917B0080H-2400-2500/4900-7125MHz MECHANICAL DRAWING W3917B0080H Unit: mm 3 | YAGEOGroup.com Data Sheet #.A 2025-11-27 Internal Antenna FPC Antenna W3917B0080H-2400-2500/4900-7125MHz Charts – Return Loss W3917B0080H ALL RF parameters measured on 2mm thick PC plate Charts-Peak Gain W3917B0080H ALL RF parameters measured on 2mm thick PC plate 4 | YAGEOGroup.com Data Sheet #.A 2025-11-27 Internal Antenna FPC Antenna W3917B0080H-2400-2500/4900-7125MHz Charts-Peak Efficiency W3917B0080H ALL RF parameters measured on 2mm thick PC plate Charts- Radiation pattern W3917B0080H 5 | YAGEOGroup.com Data Sheet #.A 2025-11-27 Internal Antenna FPC Antenna W3917B0080H-2400-2500/4900-7125MHz PACKAGING Specification W3917B0080H 10PCS/PE bag 10 PE bag/foam bag 50 foam bag/ carton box Total 5000PCS/Carton box For more information Americas - [email protected] | Europe – [email protected] | Asia – [email protected] | Questions? +1-800-ANTENNA Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright , 2020. Pulse Electronics, Inc. All rights reserved. Company address: Pulse Electronics, a YAGEO Company, 15255 Innovation Drive, Suite #100, San Diego, CA 92128. ‘YAGEO Corporation and its affiliates do not recommend the use of commercial, automotive, and/or COTS grade products for high reliability applications or manned space flight.’ Issue: (26/05)

PulseElectronics.com Internal Antenna 2.4/4.9-7.125GHz FPC Antenna W3917B0100H–2400-2500/4900-7125 MHz 1 Preliminary: (25/23) Features & Applications: ELECTRICAL SPECIFICATIONS @ 25 °C General Specifications Antenna type Nominal Impedance Polarization Radiation pattern Power withstanding Dipole antenna 50Ω Linear Omni 5W Frequency (MHz) 2400-2500MHz; 4900-7125MHz VSWR <2:1 Efficiency(%) 40%@2400-2500MHz; 50%@4900-7125MHz Peak Gain(dBi) 2+/-1dBi@2400-2500MHz; 3+/-1dBi@4900-7125MHz MECHANICAL SPECIFICATIONS W3917B0100H Dimension (L x W x T) Material Color Cable type Connector Type Cable length Weight 42.6X8.6X0.15 mm FPC + Cable Black 1.13mm U.FL compatible 100mm 0.32g ENVIRONMENTAL SPECIFICATIONS W3917B0100H Storage Temperature Operating Temperature RoHS Compliant -40/+85° C -40/+105° C Yes 2400-2500 / 4900-7125 MHz Size 42.6 X 8.6 X 0.15 mm Efficiency, 60/70% VSWR < 2 Nominal impedance 50Ω Cable and connector can be customized WiFi 6E, 802.11ax Bluetooth, BLE, ZigBee DSRC ISM band radios IoT, M2M Adhesive 3M9077 PulseElectronics.com Internal Antenna 2.4/4.9-7.125GHz FPC Antenna W3917B0100H–2400-2500/4900-7125 MHz 2 Preliminary: (25/23) Mechanical Drawing W3917B0100H Dimensions: mm/inches Unless otherwise specified, all tolerances are ±.010 (0.25mm) PulseElectronics.com Internal Antenna 2.4/4.9-7.125GHz FPC Antenna W3917B0100H–2400-2500/4900-7125 MHz 3 Preliminary: (25/23) TEST Setup W3917B0100H (*) All RF parameters measured on 2mm thick PC plate PulseElectronics.com Internal Antenna 2.4/4.9-7.125GHz FPC Antenna W3917B0100H–2400-2500/4900-7125 MHz 4 Preliminary: (25/23) Return Loss & Efficiency W3917B0100H (*) All RF parameters measured on 2mm thick PC plate PulseElectronics.com Internal Antenna 2.4/4.9-7.125GHz FPC Antenna W3917B0100H–2400-2500/4900-7125 MHz 5 Preliminary: (25/23) Peak Gain W3917B0100H (*) All RF parameters measured on 2mm thick PC plate PulseElectronics.com Internal Antenna 2.4/4.9-7.125GHz FPC Antenna W3917B0100H–2400-2500/4900-7125 MHz 6 Preliminary: (25/23) Radiation Patterns 2400-2500MHz W3917B0100H PulseElectronics.com Internal Antenna 2.4/4.9-7.125GHz FPC Antenna W3917B0100H–2400-2500/4900-7125 MHz 7 Preliminary: (25/23) Radiation Patterns 4900-5900MHz W3917B0100H PulseElectronics.com Internal Antenna 2.4/4.9-7.125GHz FPC Antenna W3917B0100H–2400-2500/4900-7125 MHz 8 Preliminary: (25/23) Radiation Patterns 6000-7125MHz W3917B0100H PulseElectronics.com Internal Antenna 2.4/4.9-7.125GHz FPC Antenna W3917B0100H–2400-2500/4900-7125 MHz 9 Preliminary: (25/23) Packaging W3917B0100H 10PCS/PE bag 10 PE bag/foam bag 50 foam bag/ carton box Total 5000PCS/Carton box For More Information: Americas - [email protected] | Europe – [email protected] | Asia – [email protected] | Questions? +1-800-ANTENNA Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright , 2020. Pulse Electronics, Inc. All rights reserved. Company address: Pulse Electronics, a YAGEO Company, 15255 Innovation Drive, Suite #100, San Diego, CA 92128 ‘YAGEO Corporation and its affiliates do not recommend the use of commercial, automotive, and/or COTS grade products for high reliability applications or manned space flight.’

TEST REPORT Page 1 of 122 Report Reference No. ...................... : 80260100017001 Sample ID ......................................... : BLC-01-0963916-001 Date of issue .................................... : 01/04/2026 Total number of pages ..................... : 122 Testing Laboratory ........................... : TUV SUD South Asia Pvt Ltd Address ............................................ : Plot No. 3-P1-B, Hitech Defence & Aerospace Park, KIADB Industrial Area, BK Palya, Bengaluru, Bengaluru North Taluk | Pin code – 562149 India Applicant’s name .............................. : Schneider Electric USA, Inc., Address ............................................ : 201 Washington Street One Boston Place, Suite 2700 Boston, Massachusetts, 02108 United States Test specification Standard............: FCC Part 15 Subpart C 15.203, 15.205, 15.207, 15.209 & 15.247 RSS 247 Issue 4, RSS Gen Issue 5 Test Method ..................................... : ANSI C63.10-2020, including Cor.1-2023, ANSI C63.10a-2024, and Errata to C63.10a-2024. Non-standard test method............. : NA Test Report Form Number.............: LAB_F(EE)_138-51 Product Name..............................: Schneider Charge Test Item Description.....................: Electric Vehicle Supply Equipment (EVSE) Manufacturer ...............................: Schneider Electric Model Number..............................: EVRBA48ANAMJ3400, EVRBA48ANAMJ1772 Serial Number..............................: EP2-J3400-09 Ratings........................................: 208/240 VAC, 60 Hz FCC ID.......................................: 2AODL-EVRBA48ANAM IC ID..........................................: 24209-EVRBA48ANAM Tested by (Name + Signature) ..........................: Nikhil G Reviewed & Approved by (Name + Signature) ..........................: Raghunath M N TEST REPORT Report Reference. No.: 80260100017001 Page 2 of 122 Possible test case verdicts: - test case does not apply to the test object .... : N/A - test object does meet the requirement ......... : Pass - test object does not meet the requirement ... : Fail Testing: Condition of the EUT on Receipt.....................: Good Date of receipt of test item ............................... : 06/10/2025 Date (s) of performance of tests ...................... : 21/11/2025 to 26/03/2026 General remarks: 1. The submitted sample(s) were not drawn by laboratory. 2. The test results presented in this report relate only to the object tested. 3. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. 4. The correctness of the information related to sample(s) in the Test Request Form/Customer letterhead/E-mail is the customer’s responsibility. The laboratory reports the said information in the test report and is not liable for the same. 5. The laboratory will retain the sample(s) for 45 days except for the mandatory retention period specified by the Regulatory Bodies and unless otherwise specified by the client. 6. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. “(see Enclosure #)” refers to additional information appended to the report. “(see appended table)” refers to a table appended to the report. 7. Throughout this report a point is used as the decimal separator. Use of uncertainty of measurement for decisions on conformity (decision rule): Yes/No No decision rule is specified by the IEC/EN standard, when comparing the measurement result with the applicable limit according to the specification in that standard. The decisions on conformity are made without applying the measurement uncertainty (“simple acceptance” decision rule, previously known as “accuracy method”). Other: (to be specified) Decisions on conformity: Decision on conformity of results is based on as per standard limits or criteria. Summary of compliance: The Product comply with the requirements of FCC Part 15 Subpart C 15.203, 15.205, 15.207, 15.209 & 15.247 / RSS 247 Issue 4, RSS Gen Issue 5. TEST REPORT Report Reference. No.: 80260100017001 Page 3 of 122 Revision History of Records Test Report …

Text truncated - open the document above for the full version.