2AOLH-OU1P0202Remote Control

Rev 1/26/2023 Olive Union inc Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-03-09 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AOLH-OU1P0202 Olive Union inc (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, 5F,24,Banpo-daero28-gil,Seocho-gu,Seoul,RepublicofKorea JaydenLee/ PrincipalResearchEngineer OliveUnion inc Rev 1/26/2023 Olive Union inc Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-03-09 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AOLH-OU1P0202 PARTRON CO., LTD (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, 5F,24,Banpo-daero28-gil,Seocho-gu,Seoul,RepublicofKorea JaydenLee/PrincipalResearch EngineerOliveUnion inc

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service:  cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB)  cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab)  Agent can be Individual Entity or a Company Entity  Agent Entity must be located in US, US address/phone  Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter)  Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. Olive Union inc U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Signed by (Printed Name/Title): Nathan Grinager / Co-President *This letter must be dated within 1-year (update if other terms apply) of the date the application is submitted to the TCB for device certification The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Olive Union inc FCC ID: 2AOLH-OU1P0202 Contact Name: jayden lee Street Address: 5F, 24, Banpo-daero 28-gil City/Province/Zip: Seocho-gu, Seoul, South Korea Telephone No: +82-2-585-0701 Email: [email protected] Applicant Signature: Date: 2023/03/20 Signed by (Printed Name/Title): jayden Lee / Principal Research Engineer March 22, 2023

Olive Union inc PERMANENT Exhibit Type File Name Part List Schematics Block diagram Operation description And the above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Date: Mar17, 2023 FederalCommunications Commission Authorization and Evaluation Division ConfidentialityRequest regarding application for certification ofFCC ID: 2AOLH-OU1P0202 Pursuant toSections0.457and0.459oftheCommission’sRules, weherebyrequest confidential treatment ofinformation accompanying this application asoutlined below: OliveUnion inc Part list.pdf Schematics.pdf Block diagram.pdf Operation description.pdf 5F, 24, Banpo-daero28-gil,Seocho-gu,Seoul,Republicof Korea JaydenLee / PrincipalResearchEngineer

Olive Union inc I, the undersigned, hereby authorize Mr. Sung-Ryul Kim / Senior Researcher of Korea Testing Certification. and hereafter referred to as Korea Testing Certification to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Sung-Ryul Kim / Senior Researcher of Korea Testing Certification. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Korea Testing Certification as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; Date: February 04, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Timco Engineering Inc. 849 N.W. State Road 45 Newberry, FL 32669 To whom it may concern: 5F,24,Banpo-daero28-gil,Seocho-gu,Seoul,Republicof Korea g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Printedname :Jayden, Lee

<Top View> <Bottom View> <Side View>

<Internal Over View> <Main PCB front View> <Main PCB Rear View> BLE Module (RealTek RTL8752E) <Antenna View> PCB Parttern Antenna

RFEXPOSUREEVALUATION AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b): RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,using measurementsorcomputersimulation.WhenroutineSARevaluationisnot required,portabletransmitterswithoutputpowergreaterthantheapplicable lowthresholdrequireSARevaluationtoqualifyforTCBapproval. Channel (MHz) Maximum output power (dBm) Tuneup tolerance (dBm) MaxTuneUp Power(dBm) Distance (mm) Limit Operating Mode 2402 ±1 5 3 GFSK 2440 ±1 5 3 2480±15 3 FCC ID: 2AOLH-OU1P0202 -3.01 -2.09 -2.93 -3.01 -2.09 -2.93 -2.01 -1.09 -1.93 0.630 0.778 Result: No Standalone SAR test is required. 0.509 Calculation results (mW)

Olive Union BT Antenna PassiveData Made by Intops Date: 23. 03. 21 Contract : choi, dongsub+82-10-9237-9873) 1. Network Data (Frequency2400~2483.5 MHz) 0ohm (C1) 1.8nH (C6) Matching Value N.C 2. Passive Data (Included 3D Graph) 2400MHz 2440MHz 2484MHz 3. PhotoData ANT photo Set Assembly photo Setup photo

Test Report Report No. : CE2023-00008 Form P708-07 (Rev.5) page 1 / 43 Company : Olive Union Inc. Representative : Jayden, Lee Address : 5F, 24, Banpo-daero 28-gil, Seocho-gu, Seoul, Republic of Korea 1. Product Name : Olive Remote -Model Name: OU1P0202 2. FCC ID : 2AOLH-OU1P0202 3. Date of Receipt : 2023-02-03 4. Date of test : 2023-02-03 ~ 2023-03-16 5. Test Method : 47CFR Part15 Subpart C §15.247 6. Test Result : PASS Tested by : Chang Min, Bae Approved by : Sung Ryul, Kim 1. This result of the above report are unrelated to KS Q ISO/IEC 17025 and KOLAS recognition and the result of testing with samples and sample names suggested by the client does not guarantee the quality of entire products 2. This report should not be used for advertising, lawsuit, etc. without any official permission of KTC. It is only used for the purpose of the quality test. 3. The authenticity of the report is available on the website (www.ktc.re.kr) 2023. 03. 16. www.ktc.re.kr [15809] 22 Heungan-daero27beon-gil, Gunpo-si, Gyeonggi-Do, Korea TEL : +82-1899-7654, FAX : +82-31-428-2926TEL : +82-1899-7654, FAX : +82-31-428-3736 Test Result Report No. : CE2023-00008 Form P708-08 (Rev.2) page 2 / 43 Contents 1. GENERAL INFORMATION ........................................................................................................ 3 2. ANTENNA REQUIREMENT...................................................................................................... 10 3. SPURIOUS EMISSIONS, RESTRICED BAND EDGES ........................................................... 11 4. 6㏈ CHANNEL BANDWIDTH & 99% BANDWIDTH............................................................. 34 5. MAXIMUM PEAK OUTPUT POWER ...................................................................................... 39 6. POWER SPECTRAL DENSITY ................................................................................................. 41 Test Result Report No. : CE2023-00008 Form P708-08 (Rev.2) page 3 / 43 1. General Information 1.1. Summary Testing Laboratory Korea Testing Certification Testing location / address 22 Heungan-daero 27 beon-gil, Gunpo-si, Gyeonggi-Do, 15809, Republic of Korea Applicant Olive Union Inc. Address of Applicant 5F, 24, Banpo-daero 28-gil, Seocho-gu, Seoul, Republic of Korea Contact Person of Applicant Jayden, Lee Phone Number of Applicant +82-2-585-0701 Manufacturer INTOPS.CO.LTD Address of Manufacture 7, Saneop-ro, Gwonseon-gu, Suwon-si, Gyeonggi-do, Republic of Korea Product Name Olive Remote Model Name OU1P0202 Variants Model - Power Supply DC 3.0 V Frequency Range 2 402 MHz ~ 2480 MHz (BLE) Modulation GFSK Number of Channels 40 channels Operation Temperature 0 °C ~ 40 °C Antenna Type / Antenna Gain Chip Antenna / 1.62 dBi Hardware Version V03 Software Version 1.0.0 Test Result Report No. : CE2023-00008 Form P708-08 (Rev.2) page 4 / 43 1.2. Test Information 1.2.1 Supporting Equipment Used During Test Use Manufacturer Model Comments EUT INTOPS.CO.LTD OU1P0202 - AE LG Electronics Inc. 14ZD960 Laptop Supplementary information EUT = Equipment Under Test, AE = Auxiliary / Associated Equipment, SIM = Simulator (Not Subjected to Test) 1.2.2 Report revision History Issue date Report No. Reason for issue 2022-03-16 CE2023-00008 First issued. Test Result Report No. : CE2023-00008 Form P708-08 (Rev.2) page 5 / 43 1.3. Result Summary Standard Section Requirement – Test Standard : FCC Part 15 Subpart C Result / Comments 15.205(a) 15.209 15.247(d) Transmitter Radiated Spurious Emissions and Conducted Spurious Emission Complied with requirement 15.247(a)(2) 6 ㏈ Bandwidth Complied with requirement 15.247(b)(3) Maxnimum Peak Conducted Output Power Complied with requirement 15.247(e) Peak Power Spectral Density Complied with requirement 15.207 AC Power Line Conducted Emission N/A 1) Note; 1) Please refer to FCC 15.207 which states, “Measurements to demonstrate compliance with the conducted limits are not required for devices employ Battery for operation and which do not operate from the AC power lines or contain provisions for operation while connected to the AC power lines”. Therefore, for this device, AC Power Line Conducted Emissions investigation is not required. - All measurements contained in this report were conducted with ANSI C63.10-2013, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices and KDB 558074 D01 15.247 Meas Guidance V05r02. Test Result Report No. : CE2023-00008 Form P708-08 (Rev.2) page 6 / 43 1.4. List of Test Equipment Test Equipment Used Equipment Model Manufacturer Serial Number Last Cal. Date Cal. Due Date EMI Test Receiver N9038A Agilent MY53290083 17/08/2021 17/08/2022 Turn Table DT3000-3t Innco Systems - - - Antenna Mast MA4640-XP- ET-0800 Innco Systems - - - Loop Antenna HFH2-Z2E ROHDE & SCHWARZ 100982 30/11/2021 30/11/2022 Bilog Antenna VULB9168 Schwarzbeck 01044 09/09/2021 09/09/2023 Horn Antenna HF907 ROHDE & SCHWARZ 102641 31/03/2021 31/03/2022 Horn Antenna QSH-SL-18- 26-s-20 STEATITE ANTENNA 17871 31/03/2021 31/03/2022 Pre Amplifier 310 SONOMA 340215(4417) 24/01/2022 24/01/2023 Pre Amplifier SCU-18F ROHDE & SCHWARZ 180039(5872- 13) 30/03/2021 30/03/2022 Pre Amplifier SCU-26D ROHDE & SCHWARZ 2030826 31/03/2021 31/03/2022 P-Series dual channel power meter N1912A Keysight MY45100764 10/01/2022 10/01/2023 power sensor N1921A Keysight MA45241181 10/01/2022 10/01/2023 Spectrum Analyzer FSV30 ROHDE & SCHWARZ 103924 10/05/2021 10/05/2022 DC Power Supply 66319D Agilent MY43001744 18/08/2021 18/08/2022 Spectrum Analyzer FSW43 ROHDE & SCHWARZ 104246 18/08/2021 18/08/2022 Test Result Report No. : CE2023-00008 Form P708-08 (Rev.2) page 7 / 43 1.5. Measurement uncertainty Parameter Uncertainty RF Output Power ± 0.26 ㏈ Power Spectral Density ± 0.83 ㏈ Conducted Spurious Emission ± 0.83 ㏈ Radiated Emission, 9 ㎑ to 30 ㎒ H ± 3.56 ㏈ V ± 3.56 ㏈ Radiated Emission, below 1 ㎓ H ± 3.86 ㏈ V ± 4.00 ㏈ Radiated Emission, above 1 ㎓ H ± 4.78 ㏈ V ± 4.72 ㏈ Note; -This uncertainly represe…

Text truncated - open the document above for the full version.

Test setup photos of EUT Photo of Radiated Spurious Emission Test (Below 1㎓) 3. Photo of Radiated Spurious Emission Test (Above 1㎓) -1㎓ ~ 18 ㎓ -18㎓ ~ 25 ㎓