2AONA-M105BYPower Bank

    Power indication: Short press power key, the display shows capacity in digital。 ● Do not drop, bump, throw or shake the unit, this may damage internal components ● Do not disassemble or try to repair or modify ● Do not allow the unit to come in contact with water or moisture ● If battery becomes excessively hot, emits odour, gets dented or experiences any abnormal deformity you should stop using it immediately. ● Only dispose of battery at authorized recycling centre ● Do not use harsh chemicals or cleaning agents on the exterior of this unit Congratulations on your purchase! We recognize the stress and annoyance of running out of battery power when you are on the go, so we created the power bank, a quick and easy way to stay connected and powered up no matter where you are.Featuring USB-C output, you can use powerbank to charge your tablet, most smartphones,mini speakers and other digital devices. With the user`s own Apple cable or connector, it can also charge iPhone and iPad devices. Charging your Devices Please note: Always check the voltage compatibility of your device before connecting to the power bank. ● Insert your device’s regular USB charging cable into the output port of power bank ● Insert the other end into your electronic device ● Your device should indicate that charging has started. ● When you are finished with charging please remove the USB cable from the power bank. Safety Precautions Please note: Improper use may result in product damage, decreased battery life and loss of charging capacity not covered by the manufactures warranty. ● Check device voltage for compatibility before use ● Only charge the unit from your computer or a certified approved power adaptor (certification depends on your region) ● Do not store powerbank in high or low temperature environments, small enclosed areas without ventilation or place in fire Charging the power bank Please note: Before using your power bank for the first time, please charge it to full This unit requires 3-4 full charges and drain cycles before the battery is optimized to its full potential. The unit should be recharged every 3 months when not in use. ● Insert the regular USB end into the output USB jack of computer or wall outlet adaptor. ● Insert the USB-C end into the input port on the power bank. ● The display will turn and breath showing. ● The display will light continuously when power bank is charged fully. Declaration of conformity This product complies with the radio interference requirements of the European community. Hereby, Shenzhen Pilot Technology Co., Ltd declares that the product is in compliance with the essential requirements and other relevant provisions of RE Directive 2014/53/EU. You can find the Declaration of Conformity on www.miuipower.com. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. USB-C In : 5V-3A/9V-2A Specifications: ● USB-C Input : 5V-3A/9V-2A ● USB-C Output: 5V-2.4A/9V-2.22A ● Wireless Output: 5W/7.5W/10W/15W ● Total Output: 5V-2.4A ● Capacity:5000mAh/3.85V/19.25Wh ● Size: 61.2*98*11mm ● Weight: 107g ● Operating temperature: 10ºC - 40ºC (50ºF-104ºF) USB-C Out: 5V-2.4A/9V-2.22A Wireless Out: 5W/7.5W/10W/15W

Rev1/26/2023 ShenzhenPilotTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:October14,2025 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2AONA-M105BY ShenzhenPilotTechnologyCo.,Ltd.certifiesthattheequipmentforwhichauthorizationissoughtisnot “covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903of theFCCrules. ShenzhenPilotTechnologyCo.,Ltd.certifiesthattheequipmentforwhichauthorizationissoughtdoes notincludecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.oranyofits successorsandassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofits successorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446 D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (Applicantsignature) (Applicantprintedname)：TinaHuang Rev1/26/2023 ShenzhenPilotTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:October14,2025 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2AONA-M105BY ShenzhenPilotTechnologyCo.,Ltd.certifiesthat,asofthedateofthefilingoftheapplication,the applicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesor affiliates)asanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname)：TinaHuang

ShenzhenChenxingElectronicTechnologyCo,Ltd. Company：ShenZhenChenxingElectronicTechnologyCo.,Ltd. Address：Room510，BuildingNO.1，Xinkechengindustrialpark,51DabaoRoadBaoanDistrictShenzhenCity 1 1 PRODUCTSPECIFICATIONFORAPPROVAL CUSTOMER： PRODUCTNAME： MPPPowerTransmitter PARTNo.：0403003-0155 PRODUCTSPEC： Inductance:8.1uH±10% Shieldingspec:42.4*0.4withagroovesoftferritematerial +18*0.8circle(additionalshielding) Wirespec:2UEW/1550.08*65*11Ts（21.7mminner diameter） SegmentLength：35mm 3mmhightemperaturegoldfingertape 40*21mmDoubleSidedAdhesiveTapeoncoilside DATE ： 2025/10/16 VERSION： REV1.0 SupplierApprove PREPAREDBYCHECKEDBYAPPROVEDBY 李小云周小菊 RevisionModifiedContentPrincipleDateNote REV1.0 Firstrelease-EnglishVersionXiaojuzhou 2025-10-16 PREPAREDBYCHECKEDBYAPPROVEDBY CustomerApprove Authorizedsignature& companychop Attachedistheproductspecification,anyquestions,pleasetimelyfeedbacktous,thankyou! ShenzhenChenxingElectronicTechnologyCo,Ltd. Company：ShenZhenChenxingElectronicTechnologyCo.,Ltd. Address：Room510，BuildingNO.1，Xinkechengindustrialpark,51DabaoRoadBaoanDistrictShenzhenCity 2 2 VersionChangeHistory RevisionBeforechangeAfterchangeDateApprovalby ShenzhenChenxingElectronicTechnologyCo,Ltd. Company：ShenZhenChenxingElectronicTechnologyCo.,Ltd. Address：Room510，BuildingNO.1，Xinkechengindustrialpark,51DabaoRoadBaoanDistrictShenzhenCity 3 3 SPECIFICATION 一、Ferrite1: 二、Ferrite2（additional）: A18±0.40 B2.4±0.3 C0.8±0.08 D5.4±0.3 ShenzhenChenxingElectronicTechnologyCo,Ltd. Company：ShenZhenChenxingElectronicTechnologyCo.,Ltd. Address：Room510，BuildingNO.1，Xinkechengindustrialpark,51DabaoRoadBaoanDistrictShenzhenCity 4 4 三、Dimensionspecification 四、Schematic: 五、CoilParameter: TERMINALWIRETurnsWindingDirection SF 2UEW/1550.08*65 11TsCCW ELECTRICALSPECIFICATIONS 六、ElectricalSpecification： TEMPERATURE:25±10°C,RELATIVEHUMIDITY:65±20% ITEMTERMINALSPECIFICATIONTESTFREQUENCYTESTEQUIPMENTS IND.S-F L ： 8.1uH±10% Q：＞65 100KHz/1.0VVICTOR4092D CoilOuterDiameter40±1mm CoilInnerDiameter21.7±0.5mm TotalThickness Max＜2.1mm Surrounds<1.4mm SegmentLength35mm±3mm PinLength 3 ± 2mm Hightemperature goldfingertape 3mm ShenzhenChenxingElectronicTechnologyCo,Ltd. Company：ShenZhenChenxingElectronicTechnologyCo.,Ltd. Address：Room510，BuildingNO.1，Xinkechengindustrialpark,51DabaoRoadBaoanDistrictShenzhenCity 5 5 七、Environmentcharacter: 项目 ITEM 标准 SPECIFICATION 工作温度和湿度 OperatingTemperatureandHumidity -30°C-80°C/30%-90% 存储温度和湿度 StorageTemperatureandHumidity -40°C-90°C/30%-90% 八、ProductPicture:

ShenzhenPilotTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:October14,2025 Subject;RequestforConfidentiality FCCID:2AONA-M105BY ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram OperationalDescription Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:TinaHuang Title:SalesAssistant

ShenzhenPilotTechnologyCo.,Ltd. Date:October14,2025 ProductModelNumber:M105BY FCCID:2AONA-M105BY Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd..isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By:TinaHuang ContactListedonFCCWesbite Title:SalesAssistant Email:[email protected] Telephone:13530903195 Onbehalfof:ShenzhenPilotTechnologyCo.,Ltd.

Externalphotos

FCCID2AONA-M105BY

Internalphotos ANT

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 RFExposureEvaluationReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlytothesample(s) tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.: CQASZ20250902160E-02 Applicant:ShenzhenPilotTechnologyCo.,Ltd. Addressof Applicant: 101A1IndustrialPark,buildinga1,No.7ShankengRoad,Shanxiacommunity, PinghuStreet,LonggangDistrict,ShenzhenCity,China EquipmentUnderTest(EUT): Product:PowerBank ModelNo.:M105BY TestModelNo.:M105BY BrandName:N/A FCCID: 2AONA-M105BY Standards:47CFRPart1.130747CFRPart1.1310 KDB680106D01RFExposureWirelessChargingBaseAppv04r01 DateofReceipt:2025-9-4 DateofTest:2025-9-4to2025-9-11 DateofIssue: 2025-11-10 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (JoeWang) ReviewedBy: (TimoLei) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20250902160E-02 Page:2of13 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20250902160E-02Rev.01 Initialreport 2025-11-10 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20250902160E-02 Page:3of13 2Contents Page 1VERSION............................................................................................................................................................................2 2CONTENTS........................................................................................................................................................................3 ..................................................................................................................................................................................................3 3GENERALINFORMATION..............................................................................................................................................4 3.1CLIENTINFORMATION...................................................................................................................................................4 3.2GENERALDESCRIPTIONOFEUT...................................................................................................................................4 3.3PRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD...........................................................................................4 3.4TESTENVIRONMENT......................................................................................................................................................5 3.5DESCRIPTIONOFSUPPORTUNITS..................................................................................................................................5 3.6TESTLOCATION.............................................................................................................................................................6 3.7TESTFACILITY...............................................................................................................................................................6 3.8EQUIPMENTLIST............................................................................................................................................................6 3.9TESTSOFTWARE............................................................................................................................................................7 4RFEXPOSUREEVALUATION.......................................................................................................................................8 4.1RFEXPOSURECOMPLIANCEREQUIREMENT.................................................................................................................8 4.1.1Limits....................................................................................................................................................................8 4.1.2TestProcedure...................................................................................................................................................8 4.1.3TestSetup.........................................................................................................................................................10 4.1.4TestResults......................................................................................................................................................10 APPENDIXA:PHOTOGRAPHSOFTESTSETUP.....................................................................................................13 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20250902160E-02 Page:4of13 3GeneralInformation 3.1ClientInformation Applicant: ShenzhenPilotTechnologyCo.,Ltd. AddressofApplicant:101A1IndustrialPark,buildinga1,No.7ShankengRoad,Shanxia community,PinghuStreet,LonggangDistrict,ShenzhenCity,China Manufacturer:ShenzhenPilotTechnologyCo.,Ltd. AddressofManufacturer:101A1IndustrialPark,buildinga1,No.7ShankengRoad,Shanxia community,PinghuStreet,LonggangDistrict,ShenzhenCity,China Factory:ShenzhenPilotTechnologyCo.,Ltd. AddressofFactory:(A1IndustrialPark)A1Factory101,No.7ShankengRoad,Shanxia Community,PinghuSubdistrictLonggangDistrict,Shenzhen,Guangdong, China. 3.2GeneralDescriptionofEUT ProductName: PowerBank ModelNo.: M105BY TestModelNo.: M105BY BrandName: N/A SoftwareVersion: V1.0 HardwareVersion: V1.0 EUTPowerSupply: ChargingbyAdapter:DC5V⎓3.0A/9V⎓2.0A Battery:5000mAh(19.25Wh/3.85V) 3.3ProductSpecificationsubjectivetothisstandard EquipmentCategory:Non-ISMfrequency OperationFrequencyrange:115kHz~205kHz ModulationType:ASK AntennaType:Inductioncoil AntennaGain:0dBi Note: 1.Insection15.31(m),regardstotheoperatingfrequencyrangeless1MHz. ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20250902160E…

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 TestReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonly tothesample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.:CQASZ20250902160E-01 Applicant: ShenzhenPilotTechnologyCo.,Ltd. AddressofApplicant:101A1IndustrialPark,buildinga1,No.7ShankengRoad,Shanxiacommunity, PinghuStreet,LonggangDistrict,ShenzhenCity,China EquipmentUnderTest(EUT): Product:PowerBank ModelNo.:M105BY TestModelNo.:M105BY BrandName:N/A FCCID: 2AONA-M105BY Standards:47CFRPart15,SubpartC DateofReceipt:2025-9-4 DateofTest:2025-9-4to2025-9-11 DateofIssue: 2025-11-10 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (JoeWang) ReviewedBy: (TimoLei) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20250902160E-01 Page: 2 of 35 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20250902160E-01Rev.01 Initialreport 2025-11-10 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20250902160E-01 Page: 3 of 35 2TestSummary TestItemTestRequirementTestmethodResult AntennaRequirement 47CFRPart15,SubpartCSection 15.203 ANSIC63.102020PASS ACPowerLine Conducted Emission 47CFRPart15,SubpartCSection 15.207 ANSIC63.102020PASS 20dBOccupied Bandwidth 47CFRPart15,SubpartCSection 15.215 ANSIC63.102020PASS RadiatedEmission, RadiatedSpurious Emissions 47CFRPart15,SubpartCSection 15.209 ANSIC63.102020PASS ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20250902160E-01 Page: 4 of 35 3Contents Page 1VERSION..........................................................................................................................................................................2 2TESTSUMMARY............................................................................................................................................................3 3CONTENTS......................................................................................................................................................................4 4GENERALINFORMATION...........................................................................................................................................5 4.1CLIENTINFORMATION.................................................................................................................................................5 4.2GENERALDESCRIPTIONOFEUT.................................................................................................................................5 4.3PRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD........................................................................................5 4.4TESTENVIRONMENT...................................................................................................................................................6 4.5DESCRIPTIONOFSUPPORTUNITS...............................................................................................................................6 4.6STATEMENTOFTHEMEASUREMENTUNCERTAINTY....................................................................................................7 4.7TESTLOCATION..........................................................................................................................................................7 4.8TESTFACILITY............................................................................................................................................................7 4.9DEVIATIONFROMSTANDARDS....................................................................................................................................7 4.10OTHERINFORMATIONREQUESTEDBYTHECUSTOMER............................................................................................7 4.11EQUIPMENTLIST.......................................................................................................................................................8 5TESTRESULTSANDMEASUREMENTDATA.......................................................................................................9 5.1ANTENNAREQUIREMENT............................................................................................................................................9 5.2CONDUCTEDEMISSIONS............................................................................................................................................10 5.320DBOCCUPYBANDWIDTH......................................................................................................................................13 5.4RADIATEDSPURIOUSEMISSION&RESTRICTEDBANDS...........................................................................................15 5.4.1SpuriousEmissions......................................................................................................................................15 6PHOTOGRAPHS-EUTTESTSETUP.....................................................................................................................24 6.1RADIATEDEMISSION.................................................................................................................................................24 6.2CONDUCTEDEMISSION..............................................................................................................................................28 7PHOTOGRAPHS-EUTCONSTRUCTIONALDETAILS......................................................................................29 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20250902160E-01 Page: 5 of 35 4GeneralInformation 4.1ClientInformation Applicant:ShenzhenPilotTechnologyCo.,Ltd. AddressofApplicant:101A1IndustrialPark,buildinga1,…

Text truncated - open the document above for the full version.

Setupphotos 1Photographs-EUTTestSetup 1.1RadiatedEmission 9kHz~30MHz: DC AC 30MHz~1GHz: AC DC 1.2 ConductedEmission