2AONA-M605Power Bank

   Power indication: Short press power key, the display shows capacity in digital。 ● Do not drop, bump, throw or shake the unit, this may damage internal components ● Do not disassemble or try to repair or modify ● Do not allow the unit to come in contact with water or moisture ● If battery becomes excessively hot, emits odour, gets dented or experiences any abnormal deformity you should stop using it immediately. ● Only dispose of battery at authorized recycling centre ● Do not use harsh chemicals or cleaning agents on the exterior of this unit Congratulations on your purchase! We recognize the stress and annoyance of running out of battery power when you are on the go, so we created the power bank, a quick and easy way to stay connected and powered up no matter where you are.Featuring USB-C output, you can use powerbank to charge your tablet, most smartphones,mini speakers and other digital devices. With the user`s own Apple cable or connector, it can also charge iPhone and iPad devices. Charging your Devices Please note: Always check the voltage compatibility of your device before connecting to the power bank. ● Insert your device’s regular USB charging cable into the output port of power bank ● Insert the other end into your electronic device ● Your device should indicate that charging has started. ● When you are finished with charging please remove the USB cable from the power bank. Safety Precautions Please note: Improper use may result in product damage, decreased battery life and loss of charging capacity not covered by the manufactures warranty. ● Check device voltage for compatibility before use ● Only charge the unit from your computer or a certified approved power adaptor (certification depends on your region) ● Do not store powerbank in high or low temperature environments, small enclosed areas without ventilation or place in fire Charging the power bank Please note: Before using your power bank for the first time, please charge it to full This unit requires 3-4 full charges and drain cycles before the battery is optimized to its full potential. The unit should be recharged every 3 months when not in use. ● Insert the regular USB end into the output USB jack of computer or wall outlet adaptor. ● Insert the USB-C end into the input port on the power bank. ● The display will turn and breath showing. ● The display will light continuously when power bank is charged fully. Declaration of conformity This product complies with the radio interference requirements of the European community. Hereby, Shenzhen Pilot Technology Co., Ltd declares that the product is in compliance with the essential requirements and other relevant provisions of RE Directive 2014/53/EU. You can find the Declaration of Conformity on www.miuipower.com. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. Specifications: ● USB-C Input : 5V-3A/9V-2A ● USB-C Output: 5V-2.4A/9V-2.22A/10V-2.25A ● Wireless Output: 5W/7.5W/10W/15W ● Total Output: 5V-2.4A Max ● Capacity:5000mAh/3.85V/19.25Wh ● Size: 69*104*9.4mm ● Weight: 115g ● Operating temperature: 10ºC - 40ºC (50ºF-104ºF) USB-C In : 5V-3A/9V-2A USB-C Out: 5V-2.4A/9V-2.22A/10V-2.25 Wireless Out: 5W/7.5W/10W/15W

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates FRN:0034562900 ContactName:PeterDavis TelephoneNo:561-235-6113 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofShenzhenPilotTechnologyCo.,Ltd TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:ShenzhenPilotTechnologyCo.,Ltd ProductDescription:PowerBank FRN:0027097757 GranteeCode:2AONA FCCID:2AONA-M605 ContactName:TinaHuang Address:101A1IndustrialPark,buildinga1,No.7ShankengRoad,Shanxiacommunity,Pinghu Street,LonggangDistrict,ShenzhenCity,China TelephoneNo:13530903195 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2025/10/09 Applicant’sName: ShenzhenPilotTechnologyCo.,Ltd USAgentforServiceofProcess’sName: HOPEKCORPORATIONINC Title:SalesAssistantTitle:Manager SignatureSignature

Rev 1/26/2023 Shenzhen Pilot Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Sept. 28, 2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AONA-M605 [Shenzhen Pilot Technology Co., Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Pilot Technology Co., Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Tina Huang Rev 1/26/2023 Shenzhen Pilot Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Sept. 28, 2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AONA-M605 [Shenzhen Pilot Technology Co., Ltd] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Tina Huang

CUSTOMER: DESCRIPTION : Magnetic suction coil DATE:2025-05-16 REV.NO.:A0 department quality project department project purchase quality TEL：+86-755-23461055 FAX：+86-0755-28015170 page:1/3 ADD：No. 1, 2nd Floor, 48 Zhuanwan Ring Wanquan Road, Longhua New District, Shenzhen City Note： HRSW ELECTRONICS CO.,LTD Note： Starchip Technology Co., Ltd. acknowledges the signing and stamping. Confirm / DateReview / DateApproval / Date (cover the company's official Dong Wanhong 2025-05-16 Lu Hui 2025-05-16 Wei Hanman 2025-05- 16 He Wei-Hua 2025-05- 16 Wei Lihong 2025-05-16 Wei Lihong 2025-05- 16 SPECIFICATION FOR APPROVAL Shenzhen Xingke Micro Technology Co., Ltd. CUSTOMER P/N:A21174 SPECIFICATION：G43.5 Slot (Magnetic Coil) 38mm Hong Rishengwei Technology acknowledges the signing and stamping process. Confirm / DateReview / DateApproval / Date (cover the company's official seal) 1.MECHANICAL DIMENSION (UNIT:mm) 2.SCHEMATICS: ABC D2EH 43.5±1.020.5±0.5 0.5±0.05 49±34±22.2Max 3.WINDING： STE P TAPE REMAR K N1 4.ELECTRICAL SPECIFICATION: ITEM SPEC 5.BILF OF MATERIAL： NO.SGS NO. 1 2 3 4 5 page:2/3 TES T CON HRSW ELECTRONICS CO.,LTD DRAWN BYCHECKED BY APPROVED BY He Wei-HuaWei LihongWei Lihong PART NO TITLE G43.5 Slot (Magnetic Coil) 38mm glueYellow Glue 999 LIANCHENG CO.,LTD high-temperature adhesive tape 5mm wide heat-resistant adhesive tapeCUDAK CO.,LTD Lead-free tin rod Lead-free tin rod QIAODO magnetic sheet ⌀43.5*0.5*5.3 manganese-zinc hard magnetic sheet with L-shaped slot TAIYI CO.,LTD ITEMMATERIAL SPECIFICATIONMANUFACTURER Hot air line Hot air line: 0.08 * 65 strands NANJINGJINNINGCO,LTD 100KHz,0.25V AT 25°C 6.5uH±10% 85mΩ Max HI-POT Coil with magnetic sheet S-F70 S-F Hot air line⌀ 0.08*65mm 2UEW 10TS (Ref) LDCRQ value SPECIFICATION FOR APPROVAL F 5.3±0.05 START-FINISHWIRE TYPETURNS 6.1DIMENSION TEST(UNIT:mm) TEST ITEMABCDEHF SPEC 43.5±1.0 20.5±0.5 0.5±0.05 38±3 4±2 2.1Max 5.3±0.05 1 43.8720.510.5538.5 3.501.755.31 2 43.8920.530.5338.9 3.601.785.31 3 43.9120.510.5339.5 3.701.765.33 4 43.9820.490.5239.1 3.801.735.32 5 43.9720.50.5038.2 4.001.825.31 6 7 8 9 10 MAX43.9820.530.5539.504.001.825.33 MIN43.8720.490.5038.203.501.735.31 AVERAGE43.9220.510.5338.843.721.775.32 DCR Q S-F TEST CONDAT 25°C SPEC 6.5uH ±10% 68mΩ(Max) 16.5442.00 26.4940.30 36.3841.60 46.5142.03 56.4841.05 6 7 MAX6.5442.03 MIN6.3840.30 AVERAGE6.4841.40 page:3/3 HRSW ELECTRONICS CO.,LTD Wei Lihong TITLE G43.5 Slot (Magnetic Coil) 38mm DRAWN BYCHECKED BYAPPROVED BY He WeihuaWei Lihong S-F 100KHz/0.25v PART NO SPECIFICATION FOR APPROVAL 6.SAMPLE TEST DATA 6.2ELECTRICAL TEST LIDC HI-POT TEST ITEM

Shenzhen Pilot Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 28, 2025 Subject; Request for Confidentiality FCC ID: 2AONA-M605 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Tina Huang Title: Sales Assistant

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen Pilot Technology Co., Ltd Date: Sept. 28, 2025 Product Model Number: M605 FCC ID: 2AONA-M605 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Sales Assistant Email: [email protected] Telephone: 13530903195 On behalf of: Shenzhen Pilot Technology Co., Ltd

Ext Photos Model: M605 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

Made in China Model No.: M605 Capacity: 5000mAh/3.85V/19.25Wh USB-C Input: 5V 2.4A/9V 2A USB-C Output: 5V 2.4A/9V 2.22A/10V 2.25A Wireless Output: 5W/7.5W/10W/15W Total Output: 5V 2.4A(MAX) Manufacturer:Shenzhen PiLOT Technology Co.,Ltd Power Bank FCCID:2AONA-M605

Int Photos Model: M605 Photo 1 Photo 2 ANT Photo 3 Photo 4 Photo 5 Photo 6

- Page 1 of 13 - Report No.: HB20250918054E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Power Bank Trade Mark: N/A Model Number: M605 FCC ID: 2AONA-M605 Prepared for Shenzhen Pilot Technology Co., Ltd. 101 A1 Industrial Park, building a 1, No.7 Shankeng Road, Shanxia community, Pinghu Street, Longgang District, Shenzhen City, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 13 - Report No.: HB20250918054E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT ................................................................................................................................ 8 4 RF EXPOSURE .................................................................................................................................................. 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Test Setup .................................................................................................................................................... 9 4.1.4. Test Result ................................................................................................................................................. 10 5 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 11 - Page 3 of 13 - Report No.: HB20250918054E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Pilot Technology Co., Ltd. Address ................................. : 101 A1 Industrial Park, building a 1, No.7 Shankeng Road, Shanxia community, Pinghu Street, Longgang District, Shenzhen City, China Manufacturer's Name .......... : Shenzhen Pilot Technology Co., Ltd. Address ................................. : 101 A1 Industrial Park, building a 1, No.7 Shankeng Road, Shanxia community, Pinghu Street, Longgang District, Shenzhen City, China Product description Product name ........................ : Power Bank Model Number ....................... : M605 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Sept. 18, 2025~Sept. 27, 2025 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 13 - Report No.: HB20250918054E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision Hi…

Text truncated - open the document above for the full version.

- Page 1 of 34 - Report No.: HB20250918054E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: Power Bank Trade Mark: N/A Model Number: M605 FCC ID: 2AONA-M605 Prepared for Shenzhen Pilot Technology Co., Ltd. 101 A1 Industrial Park, building a 1, No.7 Shankeng Road, Shanxia community, Pinghu Street, Longgang District, Shenzhen City, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 34 - Report No.: HB20250918054E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 6 1.5 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................. 7 3 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 8 4 LIST OF TEST EQUIPMENT .............................................................................................................................. 10 5 TEST ITEM AND RESULTS ............................................................................................................................... 12 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 25 6 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 26 7 PHOTOGRAPHS OF THE EUT .......................................................................................................................... 29 - Page 3 of 34 - Report No.: HB20250918054E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Pilot Technology Co., Ltd. Address ................................. : 101 A1 Industrial Park, building a 1, No.7 Shankeng Road, Shanxia community, Pinghu Street, Longgang District, Shenzhen City, China Manufacturer's Name .......... : Shenzhen Pilot Technology Co., Ltd. Address ................................. : 101 A1 Industrial Park, building a 1, No.7 Shankeng Road, Shanxia community, Pinghu Street, Longgang District, Shenzhen City, China Product description Product name ........................ : Power Bank Model Number ....................... : M605 Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Sept. 18, 2025~Sept. 27, 2025 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 34 - Report No.: HB202509…

Text truncated - open the document above for the full version.

Photographs of the Test Setup Model: M605 Radiated Emission Below 30MHz Radiated Emission Above 30MHz Conducted Emission Photo 1 Photo 2 Photo 3 Photo 4 Test table height 0.8m 0cm Test table height 0.8m 0cm Photo 5 Photo 6 Test table height 0.8m 0cm Test table height 0.8m 0cm