2AOQ7CGOP-EPM2-1AMPOmnipoint is a mains operated system which is used to open or close the gate automatically When RFID card is presented or when command is received from LoRA gateway

3220 Keller Springs, Suite 106, Carrollton, TX 75006 Covered Equipment Certification Attestation Letter 3/6/2025 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada Model No.: - OP-EPM-V2-1000-DG ATTN.: Reviewing Engineer FCC ID: 2AOQ7CGOP-EPM2-1AMP Gouldin Technologies, LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Gouldin Technologies, LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Noel Gouldin Title: President Company Name: Gouldin Technologies, LLC Date: 3/6/2025

* the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 3/6/2025 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada Model No.: - OP-EPM-V2-1000-DG ATTN.: Reviewing Engineer FCC ID: 2AOQ7CGOP-EPM2-1AMP Per section 2.911(d)(7) of the FCC rules, Gouldin Technologies, LLC (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: Gouldin Technologies, LLC Physical U.S. Company Address: 3220 Keller Springs Dr..,Suite 106, Carrollton, Texas, 75006 Agent name: Noel Gouldin Agent Email Address: [email protected] FRN: 0027130186 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant): Signed: Signed: Printed name: Noel Gouldin Printed name: Click here to enter text. Title: President Title: Click here to enter text. Company Name: Gouldin Technologies, LLC Company Name: Click here to enter text. Date: March 6, 2025 Date: Click here to enter a date.

3220 Keller Springs, Suite 106, Carrollton, TX 75006 3/6/2025 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY – FCC Model No.: - OP-EPM-V2-1000-DG FCC ID: 2AOQ7CGOP-EPM2-1AMP Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of 180 days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform Nemko to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☒ Short Term Internal Photos ☐ Permanent* ☒ Short Term Operation Description ☒ Permanent ☐ Short Term Parts List & Placement/BOM ☒ Permanent ☐ Short Term Tune-Up Procedure ☒ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term Test Setup Photos ------------------ ☒ Short Term User’s Manual ☐ Permanent* ☒ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed: Printed name: Noel Gouldin Title: President Company Name: Gouldin Technologies, LLC

Report number: FCC/2404003-1-A2 Dated: 09/04/2025 Nemko India (Test Lab) Pvt Ltd Page 1 of 17 CIN: U74999HR2016FTC065033 Plot No. 193, Sec -68, IMT Faridabad-121004, Haryana EMAIL: [email protected] Remark: This report has been reissued to remove test setup photographs and Photographs of EUT as per TCB request. No changes have been made to the test data, methodology, or conclusions. This report replaces original test report no. FCC/2404003-1 dated 09/12/2024 and amendment report no. FCC/2404003-1-A1 dated 04/04/2025. The results of this report relate only to the item(s) tested. The testing laboratory is responsible for all the information provided in the report, except the information provided by the customer/manufacturer, wherever applicable. The report may be reproduced in full. Partial reproduction may only be made with the written consent of Nemko India. The report is released by Nemko India in pdf format only. Printed copies of this report are uncontrolled including scans of coloured prints. This report is digitally signed on first page, doesn’t required signature on each page. EMC TEST REPORT Report No.: FCC/2404003-1-A2 Applicant: Gouldin Technologies, LLC 3220 Keller Springs Dr..,Suite 106, Carrollton, Texas, 75006 Product name: OmniPoint EPM Model name: OP-EPM-V2-1000-DG Sample ID: FCC/2404003 Specifications:  FCC 47 CFR Part 15, Subpart B Date of Receipt of Test Item: April 26, 2024 Date of Testing April 29, 2024 to April 30, 2024 Date of issue: April 9, 2025 Name and address of the Test House Nemko India (Test Lab) Pvt. Ltd. Plot No.193, Sector 68, IMT, Faridabad, Haryana-121004 Test engineer(s): Pujjawal Kumar/ Testing Engineer Signature: Reviewed by: Harshit Pal / EMC Lead Engineer Signature: Issued by: Lalit Sharma / Project Manager Signature: Report number: FCC/2404003-1-A2 Dated: 09/04/2025 Page 2 of 17 Contents of this report 1. Client Information.......................................................................................................................................... 3 1.1 Applicant............................................................................................................................................. 3 1.2 Manufacturer..................................................................................................................................... 3 1.3 Other Information............................................................................................................................. 3 2. Equipment Under Test (EUT)......................................................................................................................... 4 2.1 Identification of EUT......................................................................................................................... 4 2.2 General Product Information........................................................................................................... 4 2.3 Variants Covered By This Report...................................................................................................... 5 2.4 Equipment classification as per standard...................................................................................... 5 2.5 Modifications..................................................................................................................................... 5 2.6 Additional Information Related To Testing..................................................................................... 5 2.7 Picture Documentation..................................................................................................................... 5 3. General Test Conditions................................................................................................................................. 6 3.1 Location............................................................................................................................................... 6 3.2 Operating Environment................................................................................................................... 6 3.3 Operating During Test....................................................................................................................... 6 3.4 Test Equipment.................................................................................................................................. 7 3.5 EUT & Support Equipment............................................................................................................... 7 3.6 Connection Cable............................................................................................................................... 7 3.7 Test Set-up Drawing........................................................................................................................... 7 4. Evaluation of Performance........................................................................................................................... 8 4.1 Performance Criteria......................................................................................................................... 8 4.2 Measurement Uncertainty and Decision rule............................................................................... 8 5. Summary of results, Applicable Standards, Deviations and Results....................................................... 9 5.1 Summary of results and Applied Tests Standards......................................................................... 9 5.2 Deviations and Evaluations.............................................................................................................. 9 5.3 Final Decision..................................................................................................................................... 9 6.Testing Data...................................................................................................................................................... 10 6.1 Radiated emis…

Text truncated - open the document above for the full version.