2AOTUKDH139Handset

KDH139 User Manual 1、stem connection diagram 2 、Product list Mane Model quantity Remarks Control Box KDDY036 1 power KDDY08B 1 Optional matching Actuator 1 KDYJT014-025 1 Optional matching Actuator 1 KDYJT014-026 1 Optional matching Handset KDH 139(433.92MHz) 1 1 / 3 Intermediate connecting line power cable FCC ID: 2AOTUKDDY036 FCC ID: 2AOTUKDH139 3、Matters needing attention 1、Before use, please make sure to wire correctly according to the system connection diagram, and then connect the main power； 2、Children, the elderly and people with disabilities, please use under supervision; 3、Do not plug or unplug any cables while the power is on, it may cause malfunction of the operation function. If this happens, you can cut off the main power, and then reconnect it after about 30s to recover; 4、Before using for the first time, you should pair the wireless hand controller with the control box. The specific method is as follows： 1）Press the pairing button on the control box and hold 3S，The indicator light is flashing quickly, release the button; 2）Press any key on the hand controller within 10s, the control box indicator light stops flashing，The pairing is successful, and the control box indicator is always on； If no key is pressed within 10s, the control box indicator stops flashing, The original paired hand controller is not cleared, and the control box indicator light is always on; 3）After the pairing is successful, press the button to start the corresponding function. 5、The control box can be paired with two hand controllers. If paired with a third, the first will be cleared. 6、It is not recommended to operate multiple faders at the same time, except for special functions; 7、Please replace the battery of the controller in time. When not in use for a long time, remove the battery. 4、Key function description 1、Hand control panel diagram 2 / 3 2、Hand control button menu Key symbol Key Function Note Press and hold pusher 2 to extend, release and stop Press and hold pusher 2 to retract, release to stop Press and hold pusher 1 to extend, release and stop Press and hold pusher 1 to retract and release to stop Press and release. Push rod 1 and push rod 2 are fully retracted and stop. Press any key to stop during operation. Remark：If the battery is used for a long time and the function is abnormal due to insufficient power supply, please replace the battery with a new one 5、Use environment 1、Environmental illumination: 200 ± 50Lx of natural light or fluorescent lamp; 2、Power：AAA 1.5V*3； 3、Temperature：0—50°C； 4、Relative humidity：< 90%； 5、Atmospheric pressure：86KPa—106KPa 3 / 3 key1 key2 key3 key4 key5 FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undeundesired operation.

QA-FR-170-B Co mpany: Changzhou Kaidi Electrical Inc. Add: Jiangcun, Henglin Town, changzhou, China Tel: (8 6)519-67898510 Fax: (86)519-67898509 FCC Authorization Date: 2019-12-31 FE DERAL COMM UNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Changzhou Kaidi Electrical Inc., the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Typed or Printed Name: Qin Yin Title: Engineer

Compan y: Changzhou Kaidi Electrical Inc. Add: Jiangcun, Henglin Town, changzhou, China Tel: (86)519-67898510 Fax: (86)519-678985 09 E-mail: [email protected] FCC Confidential Authorization Date: 2019-12-31 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AOTUKDH139 To: whom it may concern, In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Changzhou Kaidi Electrical Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Typed or Printed Name: Qin Yin Title: Engineer

EXHIBIT A - EUT EXTERNAL PHOTOGRAPHS Button 3 Button 4 Button 5 Button 1 Button 2

Product Name:Handset Model Name:KDH139 FCC ID:2AO TUKDH139

EXHIBIT B - EUT INTERNAL PHOTOGRAPHS Antenna

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.231 TEST REPORT For Changzhou Kaidi Electrical Inc. Jiangcun, Henglin Town, Changzhou, China FCC ID: 2AOTUKDH139 Report Type: Original Report Product Type: Handset Test Engineer: Chao Gao Report Number: RSHA191231001-00A Report Date: 2020-03-12 Reviewed By: Oscar Ye EMC Manager Prepared By: Bay Area Compliance Laboratories Corp. (Kunshan) No.248 Chenghu Road, Kunshan, Jiangsu province, China Tel: +86-0512-86175000 Fax: +86-0512-88934268 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RSHA191231001-00A FCC Part 15.231 Page 2 of 25 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 3 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 3 TEST METHODOLOGY .................................................................................................................................................. 3 MEASUREMENT UNCERTAINTY .................................................................................................................................... 4 TEST FACILITY ............................................................................................................................................................. 4 SYSTEM TEST CONFIGURATION .......................................................................................................................... 5 JUSTIFICATION ............................................................................................................................................................. 5 EUT EXERCISE SOFTWARE .......................................................................................................................................... 5 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 5 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 5 EXTERNAL I/O CABLE .................................................................................................................................................. 5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 6 SUMMARY OF TEST RESULTS ............................................................................................................................... 7 TEST EQUIPMENT LIST ........................................................................................................................................... 8 FCC§15.203 - ANTENNA REQUIREMENT .............................................................................................................. 9 APPLICABLE STANDARD .............................................................................................................................................. 9 ANTENNA CONNECTED CONSTRUCTION ...................................................................................................................... 9 FCC §15.205, §15.209, §15.231 (B) - RADIATED EMISSIONS ............................................................................. 10 APPLICABLE STANDARD ............................................................................................................................................ 10 EUT SETUP ................................................................................................................................................................ 11 EMI TEST RECEIVER SETUP ....................................................................................................................................... 12 TEST PROCEDURE ...................................................................................................................................................... 12 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 12 TEST RESULTS SUMMARY .......................................................................................................................................... 12 TEST DATA ................................................................................................................................................................ 12 FCC §15.231(A) (1) - DEACTIVATION TESTING ................................................................................................. 22 APPLICABLE STANDARD ............................................................................................................................................ 22 TEST PROCEDURE ...................................................................................................................................................... 22 TEST DATA ................................................................................................................................................................ 22 FCC §15.231(C) - 20DB EMISSION BANDWIDTH TESTING ...............…

Text truncated - open the document above for the full version.

EXHIBIT C - TEST SETUP PHOTOGRAPHS Radiated Emissions (Below 1GHz) Radiated Emissions (Above 1GHz)